Introduce configSTACK_DEPTH_TYPE so the application writer change the type used to specify a stack size from uint16_t to whatever they like. Defaults to uint16_t if not defined.
Introduce configINITIAL_TICK_COUNT to allow users to start the tick count at something other than 0. Used for testing, but overflows can be better tested by setting configUSE_16_BIT_TICKS to 1.
Split xQueueGenericReceive() into xQueueReceive(), xQueuePeek() and xQueueSemaphoreTake() as the first step in refactoring xQueueGenericReceive().
Add Cortex-M3 port layer for Code Composer Studio - previously there was only a Cortex-M4F port.
Introduce configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING() to allow applications to prevent portSUPPRESS_TICKS_AND_SLEEP() being called. Previously the portPRE_SLEEP_PROCESSING() macro could only be used to abort entry into sleep time after clocks had been re-programmed for the distant wake time.
+ Add configASSERT() into ARM Cortex-M ports to check the number of priority
bit settings.
+ Clear the 'control' register before starting ARM Cortex-M4F ports in case
the FPU is used before the scheduler is started. This just saves a few
bytes on the main stack as it prevents space being left for a later save
of FPU registers.
+ Added xSemaphoreGetMutexHolderFromISR().
+ Corrected use of portNVIC_PENDSVSET to portNVIC_PENDSVSET_BIT in MPU ports.
- Clear the SysTick current value register before starting the SysTick (only required if something uses SysTick before starting the scheduler).
- Ensure atomic operations are thread safe by executing clrex in the context switch.
+ Set flash wait states on MSP432 demos.
+ Remove use of obsolete IO library in PIC32 demos.
+ Remove obsolete item left on stack of first task to run in the Cortex-M0 ports.
+ Correct IA32 GCC vPortExitCritical() implementation when configMAX_API_CALL_INTERRUPT_PRIORITY == portMAX_PRIORITY.
Add an MPU demo that uses the Keil simulator that also uses the Keil compiler.
Correct a few version numbers for files recently added to the repository.
Add RVDS ARM Cortex-M4F MPU port.
Increase the size of each buffer allocated to pbufs in the Microblaze lwIP demo to prevent pbufs chaining.
Use _start as the top of the stack for each Microblaze task, rather than NULL, as NULL was causing the Xilinx SDK to try and unwind the stack too far.
Tidy up CEC1302 demo.
Ensure bit 0 of the task address is clear when setting up stack of initial Cortex-M3/4/7 stacks (for strict compliance, although not practically necessary).
vTaskGetTaskInfo() changed to vTaskGetInfo() - with a macro added for backward compatibility.
Reduce the number of xTaskCreateStatic() parameters by having the function return the task handle, rather than pass the task handle out using a parameter. This is also consistent with other objectCreate() functions.
+ The MPU port is not supported in this revision number.
+ The documentation for the static allocation functions in the header files has not yet been updated for this revision.
Kernel updates:
+ Simplify the static allocation of objects implementation.
+ Introduce configSUPPORT_DYNAMIC_ALLOCATION in addition to the existing configSUPPORT_STATIC_ALLOCATION so FreeRTOS can be built without providing a heap at all.
Demo application updates:
+ Update the demos to take into account the new configSUPPORT_DYNAMIC_ALLOCATION constant.
+ Add an MSVC demo that only uses static allocation, and does not include a FreeRTOS heap.
+ Update the MSVC project to use both configSUPPORT_STATIC_ALLOCATION and configSUPPORT_DYNAMIC_ALLOCATION.
+ Update the MingW project to use only configSUPPORT_DYNAMIC_ALLOCATION.
Fix build error when configSUPPORT_STATIC_ALLOCATION and configNUM_THREAD_LOCAL_STORAGE_POINTERS were greater than zero at the same time.
Allow the pdMS_TO_TICKS macro to be overridden by a definition in FreeRTOSConfig.h.
- Remove the standard demo files that used the [long since deprecated] alternative API.
- Add standard demo task that tests the new xTaskAbortDelay() function.
- Update the Win32 Visual Studio project to use Visual Studio 2015 Community Edition.
- Rename the xGenericListItem TCB member to xStateListItem as it better describes the member's purpose.
+ Added xTaskAbortDelay() function, which causes a task to exit the Blocked state even before the timeout has expired or the event the task is waiting for has occurred.
+ For efficiency and code size reasons on some architectures, replace many instances of "== pdTRUE" with "!= pdFALSE".
+ Added xPortIsInsideInterrupt() to RVDS ARM CM4F port - the same will get added to other ports in time.
Demo application code:
+ Added first pass Microchip CEC1302 demo for Keil.
+ Harden the new StaticAllocation.c standard demo tasks against integer promotion rules causing problems on 16-bit architectures.
Move structures used for static allocation of tasks and queues into FreeRTOS.h from their individual API header files.
Add SAME70 Xplained Atmel Studio project.
Update SAMV71 Atmel Studio project to use Studio 7.
Revert some changes to GenQTest.c standard demo task which only function correctly when a queue registry was used.
+ Add the pre-existing 64-bit Cortex-A53 port layer into the head revision of the main repository.
Demo application updates:
+ Update Zynq demo to use SDK version 2015.4
+ Add task static allocation standard demo to Zynq demo.
+ Make the XScuGic object accessible outside of the vConfigureTickInterrupt(), again in the Zynq demo.
+ Updated all ARM Cortex-M0 ports to include an additional ISB instruction as the scheduler is started.
Demo app files:
+ Fixex build issues in XMC1000 demos.
+ heap_1.c and heap_2.c now support configAPPLICATION_ALLOCATED_HEAP (heap_4.c already did) which allows the heap to be placed by the user rather than the linker.
Demo app changes:
+ SAMD20 project has been updated to use Atmel Studio 7.
+ Support tickless idle when configUSE_PREEMPTION is 0 (previously tickless idle was only supported when the pre-emptive scheduler was being used).
+ If a stack was statically allocated, then don't try freeing it if the TCB cannot be allocated.
+ Remove use of INCLUDE_xEventGroupsSetBitsFromISR() pre-processor macro, as it was not tested anyway.
Demo app changes:
+ Updated SAM4L Atmel Studio project to use Atmel Studio 7.
Kernel source changes:
- Added xTaskNotifyStateClear() API function.
- Added the GCC Cortex-R port (existed for a while) into the main download.
- Improved the IAR RL78 port's handling of different memory model combinations.
- Removed some compiler warnings in heap_5.c.
Demo app changes:
- Added example use of xTaskNotifyStateClear() to the TaskNotify standard demo tasks.
Bug fix - issue introduced in V8.2.2 when the current timer list is empty and the overflow timer list is not empty.
Add PIC32MZ EF (floating point) support and update the MZ demo project to test the flop context switching.
Improve efficiency of the stack overflow checking.
Add CLI to RX71M demo.
General tidy up of new RZ and RX projects - including ensuring the UART driver copes with 0 length strings.
Add stack overflow checking to the [old] PIC24 demo.
- Complete the demo projects for the RX113 using IAR, GCC and Renesas compilers by including a basic UART CLI.
Standard demo tasks:
- Add some volatile qualifiers to variables in IntQueue.c.
Add additional asserts into timers.c.
Trivial changes and changes in demo applications:
RX113 IAR project is not building and running.
Make FreeRTOS_SetupInterrupt() and FreeRTOS_ClearInterrupt() weak symbols in the Zynq SDK repository.
Correct typo in the port layer comments that was cut and paste into multiple files.
+ Added Renesas RXv2 port for IAR.
Demo apps:
+ Demo/Rename the CORTEX_R4F_T_GCC_IAR_ARM directory to just Rename the CORTEX_R4F_T_GCC_IAR.
+ Add IAR project for the RX113.
+ Add RX231 e2studio projects for the RX231.
- Remove configASSERT() if a queue cannot be created, malloc failed hook will be called anyway.
Demo apps:
- RZ/T blinky demo working, but still lots to do to improve the port.
FreeRTOS+Trace:
- Add trace macros for task notifications.
- Update to the latest trace recorder library.
Demo projects:
- Only include the CLI command to show run time states if configGENERATE_RUN_TIME_STATS is set to 1.
Richard Barry