Switch to using the private watchdog as the run time stats timer in the Zynq demo.

FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo/src/FreeRTOSConfig.h

@@ -159,14 +159,13 @@ readable ASCII form.  See the notes in the implementation of vTaskList() within
 FreeRTOS/Source/tasks.c for limitations. */
 #define configUSE_STATS_FORMATTING_FUNCTIONS	1
 
-/* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS is not required because the time base
+/* The private watchdog is used to generate run time stats. */
-comes from the ulHighFrequencyTimerCounts variable which is incremented in a
+#include "xscuwdt.h"
-high frequency timer that is already being started as part of the interrupt
+extern XScuWdt xWatchDogInstance;
-nesting test. */
+extern void vInitialiseTimerForRunTimeStats( void );
 #define configGENERATE_RUN_TIME_STATS 1
-extern volatile uint32_t ulHighFrequencyTimerCounts;
+#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() vInitialiseTimerForRunTimeStats()
-#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS()
+#define portGET_RUN_TIME_COUNTER_VALUE() ( 0xffffffffUL - XScuWdt_ReadReg( xWatchDogInstance.Config.BaseAddr, XSCUWDT_COUNTER_OFFSET ) )
-#define portGET_RUN_TIME_COUNTER_VALUE() ulHighFrequencyTimerCounts
 
 /* The size of the global output buffer that is available for use when there
 are multiple command interpreters running at once (for example, one on a UART
@@ -205,11 +204,21 @@ Zynq MPU. */
 
 
 
-/****** Network configuration settings. ***************************************/
+/****** Network configuration settings - only used when the lwIP example is
+built.  See the page that documents this demo on the http://www.FreeRTOS.org
+website for more information. ***********************************************/
 
+/* The priority for the task that unblocked by the MAC interrupt to process
+received packets. */
 #define configMAC_INPUT_TASK_PRIORITY		( configMAX_PRIORITIES - 1 )
+
+/* The priority of the task that runs the lwIP stack. */
 #define configLWIP_TASK_PRIORITY			( configMAX_PRIORITIES - 2 )
 
+/* The priority of the task that uses lwIP sockets to provide a simple command
+line interface. */
+#define configCLI_TASK_PRIORITY				( tskIDLE_PRIORITY )
+
 /* MAC address configuration. */
 #define configMAC_ADDR0	0x00
 #define configMAC_ADDR1	0x13

FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo/src/Full_Demo/IntQueueTimer.c

@@ -148,9 +148,9 @@ actually being reached. */
 extern uint32_t ulPortInterruptNesting;
 static uint32_t ulMaxRecordedNesting = 0;
 
-/* For convenience the high frequency timer increments a variable that is then
+/* Used to ensure the high frequency timer is running at the expected
-used as the time base for the run time stats. */
+frequency. */
-volatile uint32_t ulHighFrequencyTimerCounts = 0;
+static volatile uint32_t ulHighFrequencyTimerCounts = 0;
 
 /*-----------------------------------------------------------*/
 
@@ -238,8 +238,7 @@ BaseType_t xYieldRequired;
 	}
 	else
 	{
-		/* The high frequency timer is also used to generate the time base for
+		/* Used to check the timer is running at the expected frequency. */
-		the run time state. */
 		ulHighFrequencyTimerCounts++;
 
 		/* Latch the highest interrupt nesting count detected. */

FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo/src/lwIP_Demo/lwIP_Apps/apps/BasicSocketCommandServer/BasicSocketCommandServer.c

@@ -83,9 +83,13 @@ const char *pcWelcomeMessage = "FreeRTOS command server - connection accepted.\r
 char cInChar;
 static char cInputString[ cmdMAX_INPUT_SIZE ], cOutputString[ cmdMAX_OUTPUT_SIZE ];
 portBASE_TYPE xReturned;
+extern void vRegisterSampleCLICommands( void );
 
 	( void ) pvParameters;
 
+	/* Register the standard CLI commands. */
+	vRegisterSampleCLICommands();
+
 	lSocket = lwip_socket(AF_INET, SOCK_STREAM, 0);
 
 	if( lSocket >= 0 )

FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo/src/lwIP_Demo/lwIP_Apps/lwIP_Apps.c

@@ -165,12 +165,11 @@ static struct netif xNetIf;
 	use of the lwIP raw API. */
 	httpd_init();
 
-	sys_thread_new( "lwIP Input", xemacif_input_thread, &xNetIf, configMINIMAL_STACK_SIZE, configMAC_INPUT_TASK_PRIORITY );
+	sys_thread_new( "lwIP_In", xemacif_input_thread, &xNetIf, configMINIMAL_STACK_SIZE, configMAC_INPUT_TASK_PRIORITY );
 
 	/* Create the FreeRTOS defined basic command server.  This demonstrates use
 	of the lwIP sockets API. */
-#warning Commented out CLI
+	xTaskCreate( vBasicSocketsCommandInterpreterTask, "CmdInt", configMINIMAL_STACK_SIZE * 5, NULL, configCLI_TASK_PRIORITY, NULL );
-//	xTaskCreate( vBasicSocketsCommandInterpreterTask, "CmdInt", configMINIMAL_STACK_SIZE * 10, NULL, configMAX_PRIORITIES - 2, NULL );
 }
 /*-----------------------------------------------------------*/
 

FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo/src/lwIP_Demo/lwIP_port/netif/xpqueue.c

@@ -31,7 +31,7 @@ pq_create_queue()
 	pq_queue_t *q = NULL;
 
 	if (i >= NUM_QUEUES) {
-		xil_printf("ERR: Max Queues allocated\n\r");
+		//xil_printf("ERR: Max Queues allocated\n\r");
 		return q;
 	}
 

FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo/src/lwIP_Demo/main_lwIP.c

@@ -156,4 +156,4 @@ static void prvLEDToggleTimer( TimerHandle_t pxTimer )
 	vParTestToggleLED( mainTIMER_LED );
 }
 
-
+/*-----------------------------------------------------------*/

FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo/src/main.c

@@ -93,6 +93,7 @@
 
 /* Standard includes. */
 #include <stdio.h>
+#include <limits.h>
 
 /* Scheduler include files. */
 #include "FreeRTOS.h"
@@ -123,7 +124,7 @@
  *
  * When mainSELECTED_APPLICATION is set to 2 the lwIP example will be run.
  */
-#define mainSELECTED_APPLICATION	0
+#define mainSELECTED_APPLICATION	2
 
 /*-----------------------------------------------------------*/
 
@@ -161,6 +162,10 @@ void vApplicationIdleHook( void );
 void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName );
 void vApplicationTickHook( void );
 
+/* The private watchdog is used as the timer that generates run time
+stats.  This frequency means it will overflow quite quickly. */
+XScuWdt xWatchDogInstance;
+
 /*-----------------------------------------------------------*/
 
 /* The interrupt controller is initialised in this file, and made available to
@@ -359,5 +364,25 @@ size_t x;
 
     return ulBytes - x;
 }
+/*-----------------------------------------------------------*/
+
+void vInitialiseTimerForRunTimeStats( void )
+{
+XScuWdt_Config *pxWatchDogInstance;
+uint32_t ulValue;
+const uint32_t ulMaxDivisor = 0xff, ulDivisorShift = 0x08;
+
+	 pxWatchDogInstance = XScuWdt_LookupConfig( XPAR_SCUWDT_0_DEVICE_ID );
+	 XScuWdt_CfgInitialize( &xWatchDogInstance, pxWatchDogInstance, pxWatchDogInstance->BaseAddr );
+
+	 ulValue = XScuWdt_GetControlReg( &xWatchDogInstance );
+	 ulValue |= ulMaxDivisor << ulDivisorShift;
+	 XScuWdt_SetControlReg( &xWatchDogInstance, ulValue );
+
+	 XScuWdt_LoadWdt( &xWatchDogInstance, UINT_MAX );
+	 XScuWdt_SetTimerMode( &xWatchDogInstance );
+	 XScuWdt_Start( &xWatchDogInstance );
+}
+