Update trace recorder code in the LPC18xx project.
Richard Barry
12 years ago
parent
d8248c49fc
commit
00136d4b51
@ -0,0 +1,509 @@
|
|||||||
|
/*******************************************************************************
|
||||||
|
* Tracealyzer v2.4.1 Recorder Library
|
||||||
|
* Percepio AB, www.percepio.com
|
||||||
|
*
|
||||||
|
* trcConfig.h
|
||||||
|
*
|
||||||
|
* Configuration parameters for the trace recorder library. Before using the
|
||||||
|
* trace recorder library, please check that the default settings are
|
||||||
|
* appropriate for your system, and if necessary adjust these. Most likely, you
|
||||||
|
* will need to adjust the NTask, NISR, NQueue, NMutex and NSemaphore values to
|
||||||
|
* reflect the number of such objects in your system. These may be
|
||||||
|
* over-approximated, although larger values values implies more RAM usage.
|
||||||
|
*
|
||||||
|
* Terms of Use
|
||||||
|
* This software is copyright Percepio AB. The recorder library is free for
|
||||||
|
* use together with Percepio products. You may distribute the recorder library
|
||||||
|
* in its original form, including modifications in trcHardwarePort.c/.h
|
||||||
|
* given that these modification are clearly marked as your own modifications
|
||||||
|
* and documented in the initial comment section of these source files.
|
||||||
|
* This software is the intellectual property of Percepio AB and may not be
|
||||||
|
* sold or in other ways commercially redistributed without explicit written
|
||||||
|
* permission by Percepio AB.
|
||||||
|
*
|
||||||
|
* Disclaimer
|
||||||
|
* The trace tool and recorder library is being delivered to you AS IS and
|
||||||
|
* Percepio AB makes no warranty as to its use or performance. Percepio AB does
|
||||||
|
* not and cannot warrant the performance or results you may obtain by using the
|
||||||
|
* software or documentation. Percepio AB make no warranties, express or
|
||||||
|
* implied, as to noninfringement of third party rights, merchantability, or
|
||||||
|
* fitness for any particular purpose. In no event will Percepio AB, its
|
||||||
|
* technology partners, or distributors be liable to you for any consequential,
|
||||||
|
* incidental or special damages, including any lost profits or lost savings,
|
||||||
|
* even if a representative of Percepio AB has been advised of the possibility
|
||||||
|
* of such damages, or for any claim by any third party. Some jurisdictions do
|
||||||
|
* not allow the exclusion or limitation of incidental, consequential or special
|
||||||
|
* damages, or the exclusion of implied warranties or limitations on how long an
|
||||||
|
* implied warranty may last, so the above limitations may not apply to you.
|
||||||
|
*
|
||||||
|
* Copyright Percepio AB, 2013.
|
||||||
|
* www.percepio.com
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
#ifndef TRCCONFIG_H
|
||||||
|
#define TRCCONFIG_H
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* CONFIGURATION RELATED TO CAPACITY AND ALLOCATION
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* EVENT_BUFFER_SIZE
|
||||||
|
*
|
||||||
|
* Macro which should be defined as an integer value.
|
||||||
|
*
|
||||||
|
* This defines the capacity of the event buffer, i.e., the number of records
|
||||||
|
* it may store. Each registered event typically use one record (4 byte), but
|
||||||
|
* vTracePrintF may use multiple records depending on the number of data args.
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
#define EVENT_BUFFER_SIZE 5000 /* Adjust wrt. to available RAM */
|
||||||
|
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* USE_LINKER_PRAGMA
|
||||||
|
*
|
||||||
|
* Macro which should be defined as an integer value, default is 0.
|
||||||
|
*
|
||||||
|
* If this is 1, the header file "recorderdata_linker_pragma.h" is included just
|
||||||
|
* before the declaration of RecorderData (in trcBase.c), i.e., the trace data
|
||||||
|
* structure. This allows the user to specify a pragma with linker options.
|
||||||
|
*
|
||||||
|
* Example (for IAR Embedded Workbench and NXP LPC17xx):
|
||||||
|
* #pragma location="AHB_RAM_MEMORY"
|
||||||
|
*
|
||||||
|
* This example instructs the IAR linker to place RecorderData in another RAM
|
||||||
|
* bank, the AHB RAM. This can also be used for other compilers with a similar
|
||||||
|
* pragmas for linker options.
|
||||||
|
*
|
||||||
|
* Note that this only applies if using static allocation, see below.
|
||||||
|
******************************************************************************/
|
||||||
|
#define USE_LINKER_PRAGMA 0
|
||||||
|
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* SYMBOL_TABLE_SIZE
|
||||||
|
*
|
||||||
|
* Macro which should be defined as an integer value.
|
||||||
|
*
|
||||||
|
* This defines the capacity of the symbol table, in bytes. This symbol table
|
||||||
|
* stores User Events labels and names of deleted tasks, queues, or other kernel
|
||||||
|
* objects. Note that the names of active objects not stored here but in the
|
||||||
|
* Object Table. Thus, if you don't use User Events or delete any kernel
|
||||||
|
* objects you set this to zero (0) to minimize RAM usage.
|
||||||
|
******************************************************************************/
|
||||||
|
#define SYMBOL_TABLE_SIZE 5000
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* USE_SEPARATE_USER_EVENT_BUFFER
|
||||||
|
*
|
||||||
|
* Macro which should be defined as an integer value.
|
||||||
|
* Default is zero (0).
|
||||||
|
*
|
||||||
|
* This enables and disables the use of the separate user event buffer.
|
||||||
|
*
|
||||||
|
* Note: When using the separate user event buffer, you may get an artificial
|
||||||
|
* task instance named "Unknown actor". This is added as a placeholder when the
|
||||||
|
* user event history is longer than the task scheduling history.
|
||||||
|
******************************************************************************/
|
||||||
|
#define USE_SEPARATE_USER_EVENT_BUFFER 0
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* USER_EVENT_BUFFER_SIZE
|
||||||
|
*
|
||||||
|
* Macro which should be defined as an integer value.
|
||||||
|
*
|
||||||
|
* This defines the capacity of the user event buffer, in number of slots.
|
||||||
|
* A single user event can use between 1 and X slots, depending on the data.
|
||||||
|
*
|
||||||
|
* Only in use if USE_SEPARATE_USER_EVENT_BUFFER is set to 1.
|
||||||
|
******************************************************************************/
|
||||||
|
#define USER_EVENT_BUFFER_SIZE 500
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* USER_EVENT_CHANNELS
|
||||||
|
*
|
||||||
|
* Macro which should be defined as an integer value.
|
||||||
|
*
|
||||||
|
* This defines the number of allowed user event channels.
|
||||||
|
*
|
||||||
|
* Only in use if USE_SEPARATE_USER_EVENT_BUFFER is set to 1.
|
||||||
|
******************************************************************************/
|
||||||
|
#define CHANNEL_FORMAT_PAIRS 32
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* NTask, NISR, NQueue, NSemaphore, NMutex
|
||||||
|
*
|
||||||
|
* A group of Macros which should be defined as an integer value of zero (0)
|
||||||
|
* or larger.
|
||||||
|
*
|
||||||
|
* This defines the capacity of the Object Property Table - the maximum number
|
||||||
|
* of objects active at any given point within each object class.
|
||||||
|
*
|
||||||
|
* NOTE: In case objects are deleted and created during runtime, this setting
|
||||||
|
* does not limit the total amount of objects, only the number of concurrently
|
||||||
|
* active objects.
|
||||||
|
*
|
||||||
|
* Using too small values will give an error message through the vTraceError
|
||||||
|
* routine, which makes the error message appear when opening the trace data
|
||||||
|
* in Tracealyzer. If you are using the recorder status monitor task,
|
||||||
|
* any error messages are displayed in console prints, assuming that the
|
||||||
|
* print macro has been defined properly (vConsolePrintMessage).
|
||||||
|
*
|
||||||
|
* It can be wise to start with very large values for these constants,
|
||||||
|
* unless you are very confident on these numbers. Then do a recording and
|
||||||
|
* check the actual usage in Tracealyzer. This is shown by selecting
|
||||||
|
* View -> Trace Details -> Resource Usage -> Object Table
|
||||||
|
*
|
||||||
|
* NOTE 2: Remember to account for all tasks created by the kernel, such as the
|
||||||
|
* IDLE task, timer task, and any tasks created by other 3rd party
|
||||||
|
* software components, such as communication stacks. The recorder also has an
|
||||||
|
* optional monitor task to account for, if this is used.
|
||||||
|
* Moreover, one task slot is used to indicate "(startup)", i.e., a fictive
|
||||||
|
* task that represent the time before the scheduler starts.
|
||||||
|
* NTask should thus be at least 2-3 slots larger than your application task count.
|
||||||
|
*
|
||||||
|
******************************************************************************/
|
||||||
|
#define NTask 15
|
||||||
|
#define NISR 10
|
||||||
|
#define NQueue 10
|
||||||
|
#define NSemaphore 10
|
||||||
|
#define NMutex 10
|
||||||
|
|
||||||
|
/* Maximum object name length for each class (includes zero termination) */
|
||||||
|
#define NameLenTask 15
|
||||||
|
#define NameLenISR 15
|
||||||
|
#define NameLenQueue 15
|
||||||
|
#define NameLenSemaphore 15
|
||||||
|
#define NameLenMutex 15
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* TRACE_DESCRIPTION
|
||||||
|
*
|
||||||
|
* Macro which should be defined as a string.
|
||||||
|
*
|
||||||
|
* This string is stored in the trace and displayed in Tracealyzer. Can be
|
||||||
|
* used to store, e.g., system version or build date. This is also used to store
|
||||||
|
* internal error messages from the recorder, which if occurs overwrites the
|
||||||
|
* value defined here. This may be maximum 256 chars.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define TRACE_DESCRIPTION "Tracealyzer Recorder Test Program"
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* TRACE_DESCRIPTION_MAX_LENGTH
|
||||||
|
*
|
||||||
|
* The maximum length (including zero termination) for the TRACE_DESCRIPTION
|
||||||
|
* string. Since this string also is used for internal error messages from the
|
||||||
|
* recorder do not make it too short, as this may truncate the error messages.
|
||||||
|
* Default is 80.
|
||||||
|
* Maximum allowed length is 256 - the trace will fail to load if longer.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define TRACE_DESCRIPTION_MAX_LENGTH 80
|
||||||
|
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* TRACE_DATA_ALLOCATION
|
||||||
|
*
|
||||||
|
* This defines how to allocate the recorder data structure, i.e., using a
|
||||||
|
* static declaration or using a dynamic allocation in runtime (malloc).
|
||||||
|
*
|
||||||
|
* Should be one of these two options:
|
||||||
|
* - TRACE_DATA_ALLOCATION_STATIC (default)
|
||||||
|
* - TRACE_DATA_ALLOCATION_DYNAMIC
|
||||||
|
*
|
||||||
|
* Using static allocation has the benefits of compile-time errors if the buffer
|
||||||
|
* is too large (too large constants in trcConfig.h) and no need to call the
|
||||||
|
* initialization routine (xTraceInitTraceData).
|
||||||
|
*
|
||||||
|
* Using dynamic allocation may give more flexibility in some cases.
|
||||||
|
*****************************************************************************/
|
||||||
|
|
||||||
|
#define TRACE_DATA_ALLOCATION TRACE_DATA_ALLOCATION_STATIC
|
||||||
|
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* CONFIGURATION REGARDING WHAT CODE/FEATURES TO INCLUDE
|
||||||
|
*****************************************************************************/
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* USE_TRACE_ASSERT
|
||||||
|
*
|
||||||
|
* Macro which should be defined as either zero (0) or one (1).
|
||||||
|
* Default is 0.
|
||||||
|
*
|
||||||
|
* If this is one (1), the TRACE_ASSERT macro will verify that a condition is
|
||||||
|
* true. If the condition is false, vTraceError() will be called.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define USE_TRACE_ASSERT 1
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* INCLUDE_FLOAT_SUPPORT
|
||||||
|
*
|
||||||
|
* Macro which should be defined as either zero (0) or one (1).
|
||||||
|
* Default is 1.
|
||||||
|
*
|
||||||
|
* If this is zero (0), all references to floating point values are removed,
|
||||||
|
* in case floating point values are not supported by the platform used.
|
||||||
|
* Floating point values are only used in vTracePrintF and its subroutines, to
|
||||||
|
* store float (%f) or double (%lf) argments.
|
||||||
|
*
|
||||||
|
* Note: vTracePrintF can still be used with integer and string arguments in
|
||||||
|
* either case.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define INCLUDE_FLOAT_SUPPORT 0
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* INCLUDE_USER_EVENTS
|
||||||
|
*
|
||||||
|
* Macro which should be defined as either zero (0) or one (1).
|
||||||
|
* Default is 1.
|
||||||
|
*
|
||||||
|
* If this is zero (0) the code for creating User Events is excluded to
|
||||||
|
* reduce code size. User Events are application-generated events, like
|
||||||
|
* "printf" but for the trace log instead of console output. User Events are
|
||||||
|
* much faster than a printf and can therefore be used in timing critical code.
|
||||||
|
* See vTraceUserEvent() and vTracePrintF() in trcUser.h
|
||||||
|
*
|
||||||
|
* Note that Tracealyzer Standard Edition or Professional Edition is required
|
||||||
|
* for User Events, they are not displayed in Tracealyzer Free Edition.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define INCLUDE_USER_EVENTS 1
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* INCLUDE_READY_EVENTS
|
||||||
|
*
|
||||||
|
* Macro which should be defined as either zero (0) or one (1).
|
||||||
|
* Default is 1.
|
||||||
|
*
|
||||||
|
* If this is zero (0), the code for recording Ready events is
|
||||||
|
* excluded. Note, this will make it impossible to calculate the correct
|
||||||
|
* response times.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define INCLUDE_READY_EVENTS 1
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* INCLUDE_NEW_TIME_EVENTS
|
||||||
|
*
|
||||||
|
* Macro which should be defined as either zero (0) or one (1).
|
||||||
|
* Default is 0.
|
||||||
|
*
|
||||||
|
* If this is zero (1), events will be generated whenever the os clock is
|
||||||
|
* increased.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define INCLUDE_NEW_TIME_EVENTS 0
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* INCLUDE_ISR_TRACING
|
||||||
|
*
|
||||||
|
* Macro which should be defined as either zero (0) or one (1).
|
||||||
|
* Default is 1.
|
||||||
|
*
|
||||||
|
* If this is zero (0), the code for recording Interrupt Service Routines is
|
||||||
|
* excluded to reduce code size.
|
||||||
|
*
|
||||||
|
* Note, if the kernel has no central interrupt dispatcher, recording ISRs
|
||||||
|
* require that you insert calls to vTraceStoreISRBegin and vTraceStoreISREnd
|
||||||
|
* in your interrupt handlers.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define INCLUDE_ISR_TRACING 1
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* INCLUDE_OBJECT_DELETE
|
||||||
|
*
|
||||||
|
* Macro which should be defined as either zero (0) or one (1).
|
||||||
|
* Default is 1.
|
||||||
|
*
|
||||||
|
* This must be enabled (1) if tasks, queues or other
|
||||||
|
* traced kernel objects are deleted at runtime. If no deletes are made, this
|
||||||
|
* can be set to 0 in order to exclude the delete-handling code.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define INCLUDE_OBJECT_DELETE 0
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* CONFIGURATION RELATED TO BEHAVIOR
|
||||||
|
*****************************************************************************/
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* TRACE_RECORDER_STORE_MODE
|
||||||
|
*
|
||||||
|
* Macro which should be defined as one of:
|
||||||
|
* - TRACE_STORE_MODE_RING_BUFFER
|
||||||
|
* - TRACE_STORE_MODE_STOP_WHEN_FULL
|
||||||
|
* Default is TRACE_STORE_MODE_RING_BUFFER.
|
||||||
|
*
|
||||||
|
* With TRACE_RECORDER_STORE_MODE set to TRACE_STORE_MODE_RING_BUFFER, the events are
|
||||||
|
* stored in a ring buffer, i.e., where the oldest events are overwritten when
|
||||||
|
* the buffer becomes full. This allows you to get the last events leading up
|
||||||
|
* to an interesting state, e.g., an error, without having a large trace buffer
|
||||||
|
* for string the whole run since startup. In this mode, the recorder can run
|
||||||
|
* "forever" as the buffer never gets full, i.e., in the sense that it always
|
||||||
|
* has room for more events.
|
||||||
|
*
|
||||||
|
* To fetch the trace in mode TRACE_STORE_MODE_RING_BUFFER, you need to first halt the
|
||||||
|
* system using your debugger and then do a RAM dump, or to explicitly stop the
|
||||||
|
* recorder using vTraceStop() and then store/upload the trace data using a
|
||||||
|
* task that you need to provide yourself. The trace data is found in the struct
|
||||||
|
* RecorderData, initialized in trcBase.c.
|
||||||
|
*
|
||||||
|
* Note that, if you upload the trace using a RAM dump, i.e., when the system is
|
||||||
|
* halted on a breakpoint or by a debugger command, there is no need to stop the
|
||||||
|
* recorder first.
|
||||||
|
*
|
||||||
|
* When TRACE_RECORDER_STORE_MODE is TRACE_STORE_MODE_STOP_WHEN_FULL, the recording is
|
||||||
|
* stopped when the buffer becomes full. When the recorder stops itself this way
|
||||||
|
* vTracePortEnd() is called which allows for custom actions, such as triggering
|
||||||
|
* a task that stores the trace buffer, i.e., in case taking a RAM dump
|
||||||
|
* using an on-chip debugger is not possible. In the Windows port, vTracePortEnd
|
||||||
|
* saves the trace to file directly, but this is not recommended in a real-time
|
||||||
|
* system since the scheduler is blocked during the processing of vTracePortEnd.
|
||||||
|
*****************************************************************************/
|
||||||
|
|
||||||
|
#define TRACE_RECORDER_STORE_MODE TRACE_STORE_MODE_RING_BUFFER
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* STOP_AFTER_N_EVENTS
|
||||||
|
*
|
||||||
|
* Macro which should be defined as an integer value, or not defined.
|
||||||
|
* Default is -1
|
||||||
|
*
|
||||||
|
* STOP_AFTER_N_EVENTS is intended for tests of the ring buffer mode (when
|
||||||
|
* RECORDER_STORE_MODE is STORE_MODE_RING_BUFFER). It stops the recording when
|
||||||
|
* the specified number of events has been observed. This value can be larger
|
||||||
|
* than the buffer size, to allow for test of the "wrapping around" that occurs
|
||||||
|
* in ring buffer mode . A negative value (or no definition of this macro)
|
||||||
|
* disables this feature.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define STOP_AFTER_N_EVENTS -1
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* USE_IMPLICIT_IFE_RULES
|
||||||
|
*
|
||||||
|
* Macro which should be defined as either zero (0) or one (1).
|
||||||
|
* Default is 1.
|
||||||
|
*
|
||||||
|
* ### Instance Finish Events (IFE) ###
|
||||||
|
*
|
||||||
|
* For tasks with "infinite" main loops (non-terminating tasks), the concept
|
||||||
|
* of a task instance has no clear definition, it is an application-specific
|
||||||
|
* thing. Tracealyzer allows you to define Instance Finish Events (IFEs),
|
||||||
|
* which marks the point in a cyclic task when the "task instance" ends.
|
||||||
|
* The IFE is a blocking kernel call, typically in the main loop of a task
|
||||||
|
* which typically reads a message queue, waits for a semaphore or performs
|
||||||
|
* an explicit delay.
|
||||||
|
*
|
||||||
|
* If USE_IMPLICIT_IFE_RULES is one (1), the kernel macros (trcKernelPort.h)
|
||||||
|
* will define what kernel calls are considered by default to be IFEs.
|
||||||
|
*
|
||||||
|
* However, Implicit IFEs only applies to blocking kernel calls. If a
|
||||||
|
* service reads a message without blocking, it does not create a new
|
||||||
|
* instance since no blocking occurred.
|
||||||
|
*
|
||||||
|
* Moreover, the actual IFE might sometimes be another blocking call. We
|
||||||
|
* therefore allow for user-defined Explicit IFEs by calling
|
||||||
|
*
|
||||||
|
* vTraceTaskInstanceIsFinished()
|
||||||
|
*
|
||||||
|
* right before the kernel call considered as IFE. This does not create an
|
||||||
|
* additional event but instead stores the service code and object handle
|
||||||
|
* of the IFE call as properties of the task.
|
||||||
|
*
|
||||||
|
* If using Explicit IFEs and the task also calls an Implicit IFE, this may
|
||||||
|
* result in additional incorrect task instances.
|
||||||
|
* This is solved by disabling the Implicit IFEs for the task, by adding
|
||||||
|
* a call to
|
||||||
|
*
|
||||||
|
* vTraceTaskSkipDefaultInstanceFinishedEvents()
|
||||||
|
*
|
||||||
|
* in the very beginning of that task. This allows you to combine Explicit IFEs
|
||||||
|
* for some tasks with Implicit IFEs for the rest of the tasks, if
|
||||||
|
* USE_IMPLICIT_IFE_RULES is 1.
|
||||||
|
*
|
||||||
|
* By setting USE_IMPLICIT_IFE_RULES to zero (0), the implicit IFEs are disabled
|
||||||
|
* for all tasks. Tasks will then be considered to have a single instance only,
|
||||||
|
* covering all execution fragments, unless you define an explicit IFE in each
|
||||||
|
* task by calling vTraceTaskInstanceIsFinished before the blocking call.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define USE_IMPLICIT_IFE_RULES 1
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* INCLUDE_SAVE_TO_FILE
|
||||||
|
*
|
||||||
|
* Macro which should be defined as either zero (0) or one (1).
|
||||||
|
* Default is 0.
|
||||||
|
*
|
||||||
|
* If enabled (1), the recorder will include code for saving the trace
|
||||||
|
* to a local file system.
|
||||||
|
******************************************************************************/
|
||||||
|
#ifdef WIN32
|
||||||
|
#define INCLUDE_SAVE_TO_FILE 1
|
||||||
|
#else
|
||||||
|
#define INCLUDE_SAVE_TO_FILE 0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* TRACE_PROGRESS_MONITOR_TASK_PRIORITY
|
||||||
|
*
|
||||||
|
* Macro which sets the priority of the "recorder status monitor" task.
|
||||||
|
*
|
||||||
|
* This task, vTraceMonitorTask in trcUser.c, periodically writes
|
||||||
|
* the recorder status using the vTraceConsoleMessage macro, which is to
|
||||||
|
* be mapped to your console "printf" routine. The task is named TraceMon but
|
||||||
|
* is intentionally excluded from the demo trace.
|
||||||
|
*
|
||||||
|
* Default is tskIDLE_PRIORITY + 1
|
||||||
|
* Note that if your system constantly has a high CPU load from high-priority
|
||||||
|
* tasks, this might not be get a chance to execute.
|
||||||
|
*
|
||||||
|
* See vTraceMonitorTask in trcUser.c
|
||||||
|
*****************************************************************************/
|
||||||
|
#define TRACE_PROGRESS_MONITOR_TASK_PRIORITY (tskIDLE_PRIORITY + 1)
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* TRACE_PROGRESS_MONITOR_TASK_STACKSIZE
|
||||||
|
*
|
||||||
|
* Macro which sets the stack size of the "recorder status monitor" task.
|
||||||
|
*
|
||||||
|
* This task, vTraceMonitorTask in trcUser.c, periodically writes
|
||||||
|
* the recorder status using the vTraceConsoleMessage macro, which is to
|
||||||
|
* be mapped to your console "printf" routine. The task is intentionally
|
||||||
|
* excluded from the demo trace.
|
||||||
|
*
|
||||||
|
* See vTraceMonitorTask in trcUser.c
|
||||||
|
*****************************************************************************/
|
||||||
|
#define TRACE_PROGRESS_MONITOR_TASK_STACKSIZE 500
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* TRACE_PROGRESS_MONITOR_TASK_PERIOD
|
||||||
|
*
|
||||||
|
* Macro which sets the period of the "recorder status monitor" task.
|
||||||
|
*
|
||||||
|
* This task, vTraceMonitorTask in trcUser.c, periodically writes
|
||||||
|
* the recorder status using the vTraceConsoleMessage macro, which is to
|
||||||
|
* be mapped to your console "printf" routine. The task is named TraceMon but
|
||||||
|
* is intentionally excluded from the demo trace.
|
||||||
|
*
|
||||||
|
* Default is 1000 ticks (typically 1 second). On the Windows port, a lower
|
||||||
|
* value is suggested since the Windows port runs very slowly, often 20-40
|
||||||
|
* times slower than the simulated time.
|
||||||
|
*
|
||||||
|
* See vTraceMonitorTask in trcUser.c
|
||||||
|
*****************************************************************************/
|
||||||
|
#ifdef WIN32
|
||||||
|
#define TRACE_PROGRESS_MONITOR_TASK_PERIOD 100
|
||||||
|
#else
|
||||||
|
#define TRACE_PROGRESS_MONITOR_TASK_PERIOD 1000
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* TEAM_LICENSE_CODE
|
||||||
|
*
|
||||||
|
* Macro which defines a string - the team license code.
|
||||||
|
* If no team license is available, this should be an empty string "".
|
||||||
|
* This should be maximum 32 chars, including zero-termination.
|
||||||
|
*****************************************************************************/
|
||||||
|
#define TEAM_LICENSE_CODE ""
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
@ -0,0 +1,474 @@
|
|||||||
|
/*******************************************************************************
|
||||||
|
* Tracealyzer v2.4.1 Recorder Library
|
||||||
|
* Percepio AB, www.percepio.com
|
||||||
|
*
|
||||||
|
* trcHardwarePort.h
|
||||||
|
*
|
||||||
|
* Contains together with trcHardwarePort.c all hardware portability issues of
|
||||||
|
* the trace recorder library.
|
||||||
|
*
|
||||||
|
* Terms of Use
|
||||||
|
* This software is copyright Percepio AB. The recorder library is free for
|
||||||
|
* use together with Percepio products. You may distribute the recorder library
|
||||||
|
* in its original form, including modifications in trcPort.c and trcPort.h
|
||||||
|
* given that these modification are clearly marked as your own modifications
|
||||||
|
* and documented in the initial comment section of these source files.
|
||||||
|
* This software is the intellectual property of Percepio AB and may not be
|
||||||
|
* sold or in other ways commercially redistributed without explicit written
|
||||||
|
* permission by Percepio AB.
|
||||||
|
*
|
||||||
|
* Disclaimer
|
||||||
|
* The trace tool and recorder library is being delivered to you AS IS and
|
||||||
|
* Percepio AB makes no warranty as to its use or performance. Percepio AB does
|
||||||
|
* not and cannot warrant the performance or results you may obtain by using the
|
||||||
|
* software or documentation. Percepio AB make no warranties, express or
|
||||||
|
* implied, as to noninfringement of third party rights, merchantability, or
|
||||||
|
* fitness for any particular purpose. In no event will Percepio AB, its
|
||||||
|
* technology partners, or distributors be liable to you for any consequential,
|
||||||
|
* incidental or special damages, including any lost profits or lost savings,
|
||||||
|
* even if a representative of Percepio AB has been advised of the possibility
|
||||||
|
* of such damages, or for any claim by any third party. Some jurisdictions do
|
||||||
|
* not allow the exclusion or limitation of incidental, consequential or special
|
||||||
|
* damages, or the exclusion of implied warranties or limitations on how long an
|
||||||
|
* implied warranty may last, so the above limitations may not apply to you.
|
||||||
|
*
|
||||||
|
* Copyright Percepio AB, 2013.
|
||||||
|
* www.percepio.com
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
#ifndef TRCPORT_H
|
||||||
|
#define TRCPORT_H
|
||||||
|
|
||||||
|
#include "trcKernelPort.h"
|
||||||
|
|
||||||
|
/* If Win32 port */
|
||||||
|
#ifdef WIN32
|
||||||
|
|
||||||
|
#undef _WIN32_WINNT
|
||||||
|
#define _WIN32_WINNT 0x0600
|
||||||
|
|
||||||
|
/* Standard includes. */
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <windows.h>
|
||||||
|
#include <direct.h>
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* The Win32 port by default saves the trace to file and then kills the
|
||||||
|
* program when the recorder is stopped, to facilitate quick, simple tests
|
||||||
|
* of the recorder.
|
||||||
|
******************************************************************************/
|
||||||
|
#define WIN32_PORT_SAVE_WHEN_STOPPED 1
|
||||||
|
#define WIN32_PORT_EXIT_WHEN_STOPPED 1
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define DIRECTION_INCREMENTING 1
|
||||||
|
#define DIRECTION_DECREMENTING 2
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* Supported ports
|
||||||
|
*
|
||||||
|
* PORT_HWIndependent
|
||||||
|
* A hardware independent fallback option for event timestamping. Provides low
|
||||||
|
* resolution timestamps based on the OS tick.
|
||||||
|
* This may be used on the Win32 port, but may also be used on embedded hardware
|
||||||
|
* platforms. All time durations will be truncated to the OS tick frequency,
|
||||||
|
* typically 1 KHz. This means that a task or ISR that executes in less than
|
||||||
|
* 1 ms get an execution time of zero.
|
||||||
|
*
|
||||||
|
* PORT_Win32
|
||||||
|
* "Accurate" timestamping based on the Windows performance counter. Note that
|
||||||
|
* this gives the host machine time.
|
||||||
|
*
|
||||||
|
* Officially supported hardware timer ports:
|
||||||
|
* - PORT_Atmel_AT91SAM7
|
||||||
|
* - PORT_Atmel_UC3A0
|
||||||
|
* - PORT_ARM_CortexM
|
||||||
|
* - PORT_Renesas_RX600
|
||||||
|
* - PORT_Microchip_dsPIC_AND_PIC24
|
||||||
|
*
|
||||||
|
* We also provide several "unofficial" hardware-specific ports. There have
|
||||||
|
* been developed by external contributors, and have not yet been verified
|
||||||
|
* by Percepio AB. Let us know if you have problems getting these to work.
|
||||||
|
*
|
||||||
|
* Unofficial hardware specific ports provided are:
|
||||||
|
* - PORT_TEXAS_INSTRUMENTS_TMS570
|
||||||
|
* - PORT_TEXAS_INSTRUMENTS_MSP430
|
||||||
|
* - PORT_MICROCHIP_PIC32
|
||||||
|
* - PORT_XILINX_PPC405
|
||||||
|
* - PORT_XILINX_PPC440
|
||||||
|
* - PORT_XILINX_MICROBLAZE
|
||||||
|
* - PORT_NXP_LPC210X
|
||||||
|
*
|
||||||
|
*****************************************************************************/
|
||||||
|
|
||||||
|
#define PORT_NOT_SET -1
|
||||||
|
|
||||||
|
/*** Officially supported hardware timer ports *******************************/
|
||||||
|
#define PORT_HWIndependent 0
|
||||||
|
#define PORT_Win32 1
|
||||||
|
#define PORT_Atmel_AT91SAM7 2
|
||||||
|
#define PORT_Atmel_UC3A0 3
|
||||||
|
#define PORT_ARM_CortexM 4
|
||||||
|
#define PORT_Renesas_RX600 5
|
||||||
|
#define PORT_Microchip_dsPIC_AND_PIC24 6
|
||||||
|
|
||||||
|
/*** Unofficial ports, provided by external developers, not yet verified *****/
|
||||||
|
#define PORT_TEXAS_INSTRUMENTS_TMS570 7
|
||||||
|
#define PORT_TEXAS_INSTRUMENTS_MSP430 8
|
||||||
|
#define PORT_MICROCHIP_PIC32 9
|
||||||
|
#define PORT_XILINX_PPC405 10
|
||||||
|
#define PORT_XILINX_PPC440 11
|
||||||
|
#define PORT_XILINX_MICROBLAZE 12
|
||||||
|
#define PORT_NXP_LPC210X 13
|
||||||
|
|
||||||
|
/*** Select your port here! **************************************************/
|
||||||
|
#define SELECTED_PORT PORT_ARM_CortexM
|
||||||
|
/*****************************************************************************/
|
||||||
|
|
||||||
|
#if (SELECTED_PORT == PORT_NOT_SET)
|
||||||
|
#error "You need to define SELECTED_PORT here!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* IRQ_PRIORITY_ORDER
|
||||||
|
*
|
||||||
|
* Macro which should be defined as an integer of 0 or 1.
|
||||||
|
*
|
||||||
|
* This should be 0 if lower IRQ priority values implies higher priority
|
||||||
|
* levels, such as on ARM Cortex M. If the opposite scheme is used, i.e.,
|
||||||
|
* if higher IRQ priority values means higher priority, this should be 1.
|
||||||
|
*
|
||||||
|
* This setting is not critical. It is used only to sort and colorize the
|
||||||
|
* interrupts in priority order, in case you record interrupts using
|
||||||
|
* the vTraceStoreISRBegin and vTraceStoreISREnd routines.
|
||||||
|
*
|
||||||
|
* We provide this setting for some hardware architectures below:
|
||||||
|
* - ARM Cortex M: 0 (lower IRQ priority values are more significant)
|
||||||
|
* - Atmel AT91SAM7x: 1 (higher IRQ priority values are more significant)
|
||||||
|
* - Atmel AVR32: 1 (higher IRQ priority values are more significant)
|
||||||
|
* - Renesas RX600: 1 (higher IRQ priority values are more significant)
|
||||||
|
* - Microchip PIC24: 0 (lower IRQ priority values are more significant)
|
||||||
|
* - Microchip dsPIC: 0 (lower IRQ priority values are more significant)
|
||||||
|
* - TI TMS570: 0 (lower IRQ priority values are more significant)
|
||||||
|
* - Freescale HCS08: 0 (lower IRQ priority values are more significant)
|
||||||
|
* - Freescale HCS12: 0 (lower IRQ priority values are more significant)
|
||||||
|
* - PowerPC 405: 0 (lower IRQ priority values are more significant)
|
||||||
|
* - PowerPC 440: 0 (lower IRQ priority values are more significant)
|
||||||
|
* - Freescale ColdFire: 1 (higher IRQ priority values are more significant)
|
||||||
|
* - NXP LPC210x: 0 (lower IRQ priority values are more significant)
|
||||||
|
* - MicroBlaze: 0 (lower IRQ priority values are more significant)
|
||||||
|
*
|
||||||
|
* If your chip is not on the above list, and you perhaps know this detail by
|
||||||
|
* heart, please inform us by e-mail to support@percepio.com.
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*
|
||||||
|
* HWTC Macros
|
||||||
|
*
|
||||||
|
* These four HWTC macros provides a hardware isolation layer representing a
|
||||||
|
* generic hardware timer/counter used for driving the operating system tick,
|
||||||
|
* such as the SysTick feature of ARM Cortex M3/M4, or the PIT of the Atmel
|
||||||
|
* AT91SAM7X.
|
||||||
|
*
|
||||||
|
* HWTC_COUNT: The current value of the counter. This is expected to be reset
|
||||||
|
* a each tick interrupt. Thus, when the tick handler starts, the counter has
|
||||||
|
* already wrapped.
|
||||||
|
*
|
||||||
|
* HWTC_COUNT_DIRECTION: Should be one of:
|
||||||
|
* - DIRECTION_INCREMENTING - for hardware timer/counters of incrementing type
|
||||||
|
* such as the PIT on Atmel AT91SAM7X.
|
||||||
|
* When the counter value reach HWTC_PERIOD, it is reset to zero and the
|
||||||
|
* interrupt is signaled.
|
||||||
|
* - DIRECTION_DECREMENTING - for hardware timer/counters of decrementing type
|
||||||
|
* such as the SysTick on ARM Cortex M3/M4 chips.
|
||||||
|
* When the counter value reach 0, it is reset to HWTC_PERIOD and the
|
||||||
|
* interrupt is signaled.
|
||||||
|
*
|
||||||
|
* HWTC_PERIOD: The number of increments or decrements of HWTC_COUNT between
|
||||||
|
* two tick interrupts. This should preferably be mapped to the reload
|
||||||
|
* register of the hardware timer, to make it more portable between chips in the
|
||||||
|
* same family. The macro should in most cases be (reload register + 1).
|
||||||
|
*
|
||||||
|
* HWTC_DIVISOR: If the timer frequency is very high, like on the Cortex M chips
|
||||||
|
* (where the SysTick runs at the core clock frequency), the "differential
|
||||||
|
* timestamping" used in the recorder will more frequently insert extra XTS
|
||||||
|
* events to store the timestamps, which increases the event buffer usage.
|
||||||
|
* In such cases, to reduce the number of XTS events and thereby get longer
|
||||||
|
* traces, you use HWTC_DIVISOR to scale down the timestamps and frequency.
|
||||||
|
* Assuming a OS tick rate of 1 KHz, it is suggested to keep the effective timer
|
||||||
|
* frequency below 65 MHz to avoid an excessive amount of XTS events. Thus, a
|
||||||
|
* Cortex M chip running at 72 MHZ should use a HWTC_DIVISOR of 2, while a
|
||||||
|
* faster chip require a higher HWTC_DIVISOR value.
|
||||||
|
*
|
||||||
|
* The HWTC macros and vTracePortGetTimeStamp is the main porting issue
|
||||||
|
* or the trace recorder library. Typically you should not need to change
|
||||||
|
* the code of vTracePortGetTimeStamp if using the HWTC macros.
|
||||||
|
*
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
#if (SELECTED_PORT == PORT_Win32)
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT (ulGetRunTimeCounterValue())
|
||||||
|
#define HWTC_PERIOD 0
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 1 // Please update according to your hardware...
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_HWIndependent)
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT 0
|
||||||
|
#define HWTC_PERIOD 1
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 1 // Please update according to your hardware...
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_Atmel_AT91SAM7)
|
||||||
|
|
||||||
|
/* HWTC_PERIOD is hardcoded for AT91SAM7X256-EK Board (48 MHz)
|
||||||
|
A more generic solution is to get the period from pxPIT->PITC_PIMR */
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT (AT91C_BASE_PITC->PITC_PIIR & 0xFFFFF)
|
||||||
|
#define HWTC_PERIOD 2995
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 1 // higher IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_Atmel_UC3A0)
|
||||||
|
|
||||||
|
/* For Atmel AVR32 (AT32UC3A) */
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT sysreg_read(AVR32_COUNT)
|
||||||
|
#define HWTC_PERIOD ( TRACE_CPU_CLOCK_HZ / TRACE_TICK_RATE_HZ )
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 1 // higher IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_ARM_CortexM)
|
||||||
|
|
||||||
|
/* For all chips using ARM Cortex M cores */
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING
|
||||||
|
#define HWTC_COUNT (*((uint32_t*)0xE000E018))
|
||||||
|
#define HWTC_PERIOD ((*(uint32_t*)0xE000E014) + 1)
|
||||||
|
#define HWTC_DIVISOR 2
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 0 // lower IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_Renesas_RX600)
|
||||||
|
|
||||||
|
#include "iodefine.h"
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT (CMT0.CMCNT)
|
||||||
|
#define HWTC_PERIOD ((((TRACE_PERIPHERAL_CLOCK_HZ/TRACE_TICK_RATE_HZ)-1)/8))
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 1 // higher IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_Microchip_dsPIC_AND_PIC24)
|
||||||
|
|
||||||
|
/* For Microchip PIC24 and dsPIC (16 bit) */
|
||||||
|
|
||||||
|
/* Note: The trace library was originally designed for 32-bit MCUs, and is slower
|
||||||
|
than intended on 16-bit MCUs. Storing an event on a PIC24 takes about 70 µs.
|
||||||
|
In comparison, 32-bit MCUs are often 10-20 times faster. If recording overhead
|
||||||
|
becomes a problem on PIC24, use the filters to exclude less interesting tasks
|
||||||
|
or system calls. */
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT (TMR1)
|
||||||
|
#define HWTC_PERIOD (PR1+1)
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 0 // lower IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_NXP_LPC210X)
|
||||||
|
/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */
|
||||||
|
|
||||||
|
/* Tested with LPC2106, but should work with most LPC21XX chips. */
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT *((uint32_t *)0xE0004008 )
|
||||||
|
#define HWTC_PERIOD ( TRACE_CPU_CLOCK_HZ / TRACE_TICK_RATE_HZ )
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 0 // lower IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_TEXAS_INSTRUMENTS_TMS570)
|
||||||
|
/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */
|
||||||
|
|
||||||
|
#define RTIFRC0 *((uint32_t *)0xFFFFFC10)
|
||||||
|
#define RTICOMP0 *((uint32_t *)0xFFFFFC50)
|
||||||
|
#define RTIUDCP0 *((uint32_t *)0xFFFFFC54)
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT (RTIFRC0 - (RTICOMP0 - RTIUDCP0))
|
||||||
|
#define HWTC_PERIOD (RTIUDCP0)
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 0 // lower IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_TEXAS_INSTRUMENTS_MSP430)
|
||||||
|
/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT (TA0R)
|
||||||
|
#define HWTC_PERIOD TRACE_CPU_CLOCKS_PER_TICK
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 1 // higher IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_MICROCHIP_PIC32)
|
||||||
|
/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING
|
||||||
|
#define HWTC_COUNT (ReadTimer1()) /* Should be available in BSP */
|
||||||
|
#define HWTC_PERIOD (ReadPeriod1()+1) /* Should be available in BSP */
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 0 // lower IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_XILINX_PPC405)
|
||||||
|
/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING
|
||||||
|
#define HWTC_COUNT mfspr( 0x3db)
|
||||||
|
#define HWTC_PERIOD ( TRACE_CPU_CLOCK_HZ / TRACE_TICK_RATE_HZ )
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 0 // lower IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_XILINX_PPC440)
|
||||||
|
/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */
|
||||||
|
|
||||||
|
/* This should work with most PowerPC chips */
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING
|
||||||
|
#define HWTC_COUNT mfspr( 0x016 )
|
||||||
|
#define HWTC_PERIOD ( TRACE_CPU_CLOCK_HZ / TRACE_TICK_RATE_HZ )
|
||||||
|
#define HWTC_DIVISOR 1
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 0 // lower IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT == PORT_XILINX_MICROBLAZE)
|
||||||
|
/* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */
|
||||||
|
|
||||||
|
/* This should work with most Microblaze configurations.
|
||||||
|
* It uses the AXI Timer 0 - the tick interrupt source.
|
||||||
|
* If an AXI Timer 0 peripheral is available on your hardware platform, no modifications are required.
|
||||||
|
*/
|
||||||
|
#include "xtmrctr_l.h"
|
||||||
|
|
||||||
|
#define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING
|
||||||
|
#define HWTC_COUNT XTmrCtr_GetTimerCounterReg( XPAR_TMRCTR_0_BASEADDR, 0 )
|
||||||
|
#define HWTC_PERIOD ( TRACE_CPU_CLOCK_HZ / TRACE_TICK_RATE_HZ )
|
||||||
|
#define HWTC_DIVISOR 16
|
||||||
|
|
||||||
|
#define IRQ_PRIORITY_ORDER 0 // lower IRQ priority values are more significant
|
||||||
|
|
||||||
|
#elif (SELECTED_PORT != PORT_NOT_SET)
|
||||||
|
|
||||||
|
#error "SELECTED_PORT had unsupported value!"
|
||||||
|
#define SELECTED_PORT PORT_NOT_SET
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if (SELECTED_PORT != PORT_NOT_SET)
|
||||||
|
|
||||||
|
#ifndef HWTC_COUNT_DIRECTION
|
||||||
|
#error "HWTC_COUNT_DIRECTION is not set!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef HWTC_COUNT
|
||||||
|
#error "HWTC_COUNT is not set!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef HWTC_PERIOD
|
||||||
|
#error "HWTC_PERIOD is not set!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef HWTC_DIVISOR
|
||||||
|
#error "HWTC_DIVISOR is not set!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef IRQ_PRIORITY_ORDER
|
||||||
|
#error "IRQ_PRIORITY_ORDER is not set!"
|
||||||
|
#elif (IRQ_PRIORITY_ORDER != 0) && (IRQ_PRIORITY_ORDER != 1)
|
||||||
|
#error "IRQ_PRIORITY_ORDER has bad value!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if (HWTC_DIVISOR < 1)
|
||||||
|
#error "HWTC_DIVISOR must be a non-zero positive value!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
/*******************************************************************************
|
||||||
|
* vTraceConsoleMessage
|
||||||
|
*
|
||||||
|
* A wrapper for your system-specific console "printf" console output function.
|
||||||
|
* This needs to be correctly defined to see status reports from the trace
|
||||||
|
* status monitor task (this is defined in trcUser.c).
|
||||||
|
******************************************************************************/
|
||||||
|
#if (SELECTED_PORT == PORT_Atmel_AT91SAM7)
|
||||||
|
/* Port specific includes */
|
||||||
|
#include "console.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define vTraceConsoleMessage(x)
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* vTracePortGetTimeStamp
|
||||||
|
*
|
||||||
|
* Returns the current time based on the HWTC macros which provide a hardware
|
||||||
|
* isolation layer towards the hardware timer/counter.
|
||||||
|
*
|
||||||
|
* The HWTC macros and vTracePortGetTimeStamp is the main porting issue
|
||||||
|
* or the trace recorder library. Typically you should not need to change
|
||||||
|
* the code of vTracePortGetTimeStamp if using the HWTC macros.
|
||||||
|
*
|
||||||
|
******************************************************************************/
|
||||||
|
void vTracePortGetTimeStamp(uint32_t *puiTimestamp);
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* vTracePortEnd
|
||||||
|
*
|
||||||
|
* This function is called when the recorder is stopped due to full buffer.
|
||||||
|
* Mainly intended to show a message in the console.
|
||||||
|
* This is used by the Win32 port to store the trace to a file. The file path is
|
||||||
|
* set using vTracePortSetFileName.
|
||||||
|
******************************************************************************/
|
||||||
|
void vTracePortEnd(void);
|
||||||
|
|
||||||
|
#if (INCLUDE_SAVE_TO_FILE == 1)
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* vTracePortSetOutFile
|
||||||
|
*
|
||||||
|
* Sets the filename/path used in vTracePortSave.
|
||||||
|
* This is set in a separate function, since the Win32 port calls vTracePortSave
|
||||||
|
* in vTracePortEnd if WIN32_PORT_SAVE_WHEN_STOPPED is set.
|
||||||
|
******************************************************************************/
|
||||||
|
void vTracePortSetOutFile(char* path);
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* vTracePortSave
|
||||||
|
*
|
||||||
|
* Saves the trace to a file on a target-side file system. The path is set in a
|
||||||
|
* separate function, vTracePortSetOutFile, since the Win32 port may call
|
||||||
|
* vTracePortSave in vTracePortEnd, if using WIN32_PORT_SAVE_WHEN_STOPPED.
|
||||||
|
******************************************************************************/
|
||||||
|
void vTracePortSave(void);
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
#define vTraceConsoleMessage(x)
|
||||||
|
#define vTracePortSetOutFile(path)
|
||||||
|
#define vTracePortSave(void)
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
Reference in New Issue