Fix build error when configSUPPORT_STATIC_ALLOCATION and configNUM_THREAD_LOCAL_STORAGE_POINTERS were greater than zero at the same time.
Allow the pdMS_TO_TICKS macro to be overridden by a definition in FreeRTOSConfig.h.
- Remove the standard demo files that used the [long since deprecated] alternative API.
- Add standard demo task that tests the new xTaskAbortDelay() function.
- Update the Win32 Visual Studio project to use Visual Studio 2015 Community Edition.
- Rename the xGenericListItem TCB member to xStateListItem as it better describes the member's purpose.
+ Added xPortIsInsideInterrupt() to RVDS ARM CM4F port - the same will get added to other ports in time.
Demo application code:
+ Added first pass Microchip CEC1302 demo for Keil.
+ Harden the new StaticAllocation.c standard demo tasks against integer promotion rules causing problems on 16-bit architectures.
+ Updated all ARM Cortex-M0 ports to include an additional ISB instruction as the scheduler is started.
Demo app files:
+ Fixex build issues in XMC1000 demos.
+ Support tickless idle when configUSE_PREEMPTION is 0 (previously tickless idle was only supported when the pre-emptive scheduler was being used).
+ If a stack was statically allocated, then don't try freeing it if the TCB cannot be allocated.
+ Remove use of INCLUDE_xEventGroupsSetBitsFromISR() pre-processor macro, as it was not tested anyway.
Demo app changes:
+ Updated SAM4L Atmel Studio project to use Atmel Studio 7.
Exclude the entire croutine.c file when configUSE_CO_ROUTINES is 0.
New ports:
Added Cortex-M7 IAR and Keil port layers that include a minor errata workaround r0p1 Cortex-M7 devices.
Added Cortex-M4F port layer for CCS.
New demo applications:
Added demo application for STM32F7.
Added demo application for SAMv71.
+ Made xTaskNotifyGiveFromISR() its own function, rather than a macro that calls xTaskNotifyFromISR() (minor performance improvement).
+ GCC and Keil Cortex-M4F ports now use vPortRaiseBASEPRI() in place of ulPortRaiseBASEPRI() where the return value is not required (minor performance improvement).
Demo changes:
Change the [very basic] FreeRTOS+UDP SAM4E driver to use task notifications rather than a semaphore (execution time now 55% what it was in FreeRTOS V8.1.2!).
Robustness improvements to IntQueue.c standard demo task.h.
Added the latest standard demo tasks, reg test tasks and int q tasks to the SAM4E demo.
+ Fix a few compiler warnings.
+ Add TickType_t specific critical sections so critical sections are not used when accessing the tick count in cases where the access is atomic (32-bit tick count, 32-bit architecture).
+ Optimise Cortex-M4F ports by inlining some critical section macros.
+ Original ports used a #define to set the path to portmacro.h - that method has been obsolete for years and now all the old definitions have been moved into a separate header files called deprecated_definitions.h.
+ Cortex-M port now check the active vector bits against 0xff when determining if a function is called from an interrupt - previously only a subset of the bits (0x1f) were checked.
+ Add in new standard demo/test files TaskNotify.c/h and include the files in the simulator demos.
+ Update trace recorder code, and some demos to use the new version (more to do).
+ Introduce uxTaskPriorityGetFromISR().
+ Minor typo corrections.
+ Update MingW simulator demo to match the MSVC simulator demo.
+ Update the RZ IAR project so it targets the RZ RSK rather than custom hardware.
+ Update the RZ ARM/DS-5 project so it targets the RZ RSK rather than custom hardware.
+ Updated RX64M demos to use the new iodefine.h naming.
Cortex-A9 port related:
+ Update IAR, ARM and GCC Cortex-A9 port layers to include a 'task exit error' function which is called if a task attempts to incorrectly exit its implementing function.
+ Moved the instruction which switches into system mode out of the restore context macro, as it is only needed when starting the first task.
Core kernel files related:
+ Ensure there are no references to the mutexes held count when mutexes are excluded from the build.
Add additional asserts to the Keil CM3 and CM4F ports (other CM3/4 ports already updated).
Add the additional yield necessitated by the mutex held count to the case when configUSE_QUEUE_SETS is 0.
Replace LDMFD with POP instructions in IAR and RVDS Cortex-A9 ports.
Replace branch to address with indirect branch and exchange to address in register in the IAR and RVDS Cortex-A9 ports.
When a task is unblocked the need for a context switch is only signalled if the unblocked task has a priority higher than the currently running task, instead of higher than or equal to the priority of the currently running task.
Replace #define types with typedefs.
Rename all typedefs to have a _t extension.
Add #defines to automatically convert old FreeRTOS specific types to their new names (with the _t).
Correct header comments in the UARTCommandConsole.c file used in the SmartFusion2 demo.
Exercise the new xQueueSpacesAvailable() function in the MSVC demo.
Add defaults for the new traceMALLOC and traceFREE trace macros.
Catch tasks trying to exit their functions in the Cortex-M0 ports.
Add additional comments to timers.c in response to a support forum question.
Initialise _impure_ptr prior to the first task being started.
Prior to V7.5.0 a yield pended in the tick hook would have occurred during the same tick interrupt. Return pdTRUE from xTaskIncrementTick() if a yield is pending to revert to that behaviour.
Don't reset the stack location when starting the scheduler in Cortex-M0 ports as the vector offset register is not implemented and XMC1000 devices have their application vector address somewhere other than 0x00.
Richard Barry