00ad1a0200
Multiple tidy up, documentation corrections and typo corrections highlighted by Tamas Kleiber's diligent review.
11 years ago
2e42d7690a
Continue work on new event groups functionality - fixups required by test results.
11 years ago
d2c2e3ca68
Add additional asserts() to ensure certain operations are not performed when the scheduler is suspended.
...
Change the xBlockTime variables in event_groups.c/h to xTicksToWait to match the naming in other core FreeRTOS files.
11 years ago
5037ecdc5c
Checked in header file missed form previous checkin.
11 years ago
9dc39ee2a7
Add additional event group tests - and update implementation as required by test results.
11 years ago
a22d5ff5a5
Add event groups test/demo tasks.
11 years ago
f54f21b8f6
Add event_groups.c and associated functions in other core files.
...
Added xTimerPendCallbackFromISR() to provide a centralised deferred interrupt handling mechanism.
Add xPortGetLowestEverFreeHeapSize() to heap_4.c.
11 years ago
faed443e82
Continue work on STM32L demo.
11 years ago
b89fd7c1e3
Add STM32L Discovery board project as a starting point to adapt to an RTOS demo.
11 years ago
417c3d1054
Change backslashes to forward slashes for all PIC projects.
11 years ago
ad67be1577
Tidy up SAM4E NetworkInterface.c.
11 years ago
c6020ae8b4
Change conf_eth.h to provide additional Rx buffers in SAM4E demo.
11 years ago
fa002f7fdd
Final tidy up before V7.6.0 zip file creation.
11 years ago
8cd71348be
Make SAM4E network driver a little more robust.
11 years ago
c2bfac68b3
Add link to documentation page inside main_full() of the SAM4E demo.
11 years ago
0cbd5182a3
Add additional comments to SAM4E demo.
11 years ago
6be1ffccfb
Update version numbers in FreeRTOS-Plus demo files.
11 years ago
cbb14d30c5
Add basic SAM4E driver.
...
Add ipconfigETHERNET_DRIVER_ADDS_UDP_CHECKSUM, ipconfigETHERNET_DRIVER_ADDS_IP_CHECKSUM, ipconfigETHERNET_DRIVER_CHECKS_IP_CHECKSUM and ipconfigETHERNET_DRIVER_CHECKS_UDP_CHECKSUM definitions.
11 years ago
0865907f3f
Add graphics to the SAM4E demo.
11 years ago
9e9f9f30b1
Add UDP related commands to SAM4E demo.
11 years ago
b690b26861
Add standard demo tasks to SAM4E demo.
11 years ago
dc2e20bb0a
Add SAM4E-EK demo with UDP and CLI. Not yet complete.
11 years ago
a37b947615
Reorder the license text wording so the exception text is at the top rather than the bottom.
11 years ago
a2cfaa7cd9
Correct build of helper function for ports where the stack grows up.
11 years ago
8320dfb885
Update the SAM4L low power demo to use the ASF enable/disable interrupts functions rather than manipulating the PIRMASK directly - and in so doing allow other ASF functions to be called with the interrupt enable bit nesting.
11 years ago
0cd79ad81d
Change version numbers in preparation for V7.6.0 release.
11 years ago
c44d12dadb
Ensure the Win32 demo runs in co-operative mode.
11 years ago
b1b4b15353
Add configASSERT()s to ensure counting semaphores are not created with a max count of zero or an initial count greater than the max count.
11 years ago
b181a3af99
Ensure the definition of prvTaskExitError()does not result in a compiler warning in ports where its use can be overridden (GCC Cortex-M ports).
...
Remove duplicate save/restore of r14 in Cortex-M4F ports.
11 years ago
20eb03ed7d
Change behaviour when configUSE_PREEMPTION is 0 (preemption is turned off). See the change history in the next release for details.
...
Remove an erroneous const in the prototype of queue receive/peek functions.
11 years ago
30bc6c01a9
Add ehb instructions back into PIC32 port layer (upon advice).
...
Add configCLEAR_TICK_TIMER_INTERRUPT into PIC32 port layer to allow the timer configuration to be changed without any edits to the port layer being required.
Add prvTaskExitError() into the PIC32 port layer to trap tasks that attempt to exit from their implementing function.
Provide the ability to trap interrupt stack overflows in the PIC32 port.
Radically improve the timing in the Win32 simulator port layer.
11 years ago
40d2e74417
Update some standard demo task implementations so they can be used with the cooperative scheduler.
11 years ago
5aabe4f8fb
Update semtest.c to use xSemaphoreCreateBinary() in place of vSemaphoreCreateBinary.
11 years ago
dcf261a3e6
Add xSemaphoreCreateBinary() so vSemaphoreCreate() can be deprecated.
11 years ago
ca2191c6ee
Ensure PIC32MX MPLAB 8 project builds with XC.
11 years ago
9a0f2bda55
Update PIC32 MPLAB8 project so it builds with the new partest file names.
11 years ago
1b7a2e40a3
Update PIC32MX demo:
...
Change configCHECK_FOR_STACK_OVERFLOW to 3 to also check the interrupt stack.
Add a build configuration to allow use on the PIC32 USBII starter kit.
Increase some delays when talking to the LCD to ensure it always displays correctly.
Rewrite the register test tasks.
11 years ago
2ee43fbc64
Set the MSVC Win32 demo back to create the simply blinky demo by default.
...
Set the MingW Wind32 demo back to include the #error to remind people to run the CreateProjectDirectoryStructure batch file.
11 years ago
73df0ffdff
Update the Eclipse/MingW project to account for the new Win32 simulator port layer (which has better timing).
11 years ago
6642926d43
Update the FreeRTOS+ Win32 MSVC demos to account for the changes to the Win32 port layer (more accurate timing).
11 years ago
15d10ce094
Update the main Win32 MSVC demo to account for the changes to the Win32 port layer (more accurate timing).
11 years ago
aa9ec31ba9
Add missing header file to the UDP BufferAllocation_1.c scheme.
11 years ago
e46fe7c049
Second attempt - Ensure the private port number wrap check is inside the critical section in prvGetPrivatePortNumber() (UDP).
11 years ago
818abc468d
Ensure the private port number wrap check is inside the critical section in prvGetPrivatePortNumber() (UDP).
...
Add missing default values for some of the trace macros.
11 years ago
63bd3ebbef
Remove the SVC handler from the XMC1000 demo as it is no longer used by the Cortex-M0 port layer.
11 years ago
dcd261bb8b
Update the Keil and IAR CM0 port layers to match the changes made to the GCC version.
11 years ago
7bcbef721b
Remove the SVC handler from the SAMD20 FreeRTOSConfig.h as the GCC Cortex-M0 port no longer uses it.
11 years ago
41fe693968
Improve how the scheduler is started in the GCC Cortex-M0 port.
11 years ago
f64acd6a48
Added an additional configASSERT() to test the new eTaskGetState() behaviour (see previous checking comment).
11 years ago
25bab250b6
Added a little intelligence to eTaskGetState() so it can distinguish between a suspended task and a task that is indefinitely blocked on an event.
11 years ago
Richard Barry