a22d5ff5a5
Add event groups test/demo tasks.
11 years ago
f54f21b8f6
Add event_groups.c and associated functions in other core files.
...
Added xTimerPendCallbackFromISR() to provide a centralised deferred interrupt handling mechanism.
Add xPortGetLowestEverFreeHeapSize() to heap_4.c.
11 years ago
faed443e82
Continue work on STM32L demo.
11 years ago
b89fd7c1e3
Add STM32L Discovery board project as a starting point to adapt to an RTOS demo.
11 years ago
417c3d1054
Change backslashes to forward slashes for all PIC projects.
11 years ago
c6020ae8b4
Change conf_eth.h to provide additional Rx buffers in SAM4E demo.
11 years ago
fa002f7fdd
Final tidy up before V7.6.0 zip file creation.
11 years ago
c2bfac68b3
Add link to documentation page inside main_full() of the SAM4E demo.
11 years ago
0cbd5182a3
Add additional comments to SAM4E demo.
11 years ago
0865907f3f
Add graphics to the SAM4E demo.
11 years ago
9e9f9f30b1
Add UDP related commands to SAM4E demo.
11 years ago
b690b26861
Add standard demo tasks to SAM4E demo.
11 years ago
dc2e20bb0a
Add SAM4E-EK demo with UDP and CLI. Not yet complete.
11 years ago
a37b947615
Reorder the license text wording so the exception text is at the top rather than the bottom.
11 years ago
a2cfaa7cd9
Correct build of helper function for ports where the stack grows up.
11 years ago
8320dfb885
Update the SAM4L low power demo to use the ASF enable/disable interrupts functions rather than manipulating the PIRMASK directly - and in so doing allow other ASF functions to be called with the interrupt enable bit nesting.
11 years ago
0cd79ad81d
Change version numbers in preparation for V7.6.0 release.
11 years ago
c44d12dadb
Ensure the Win32 demo runs in co-operative mode.
11 years ago
b1b4b15353
Add configASSERT()s to ensure counting semaphores are not created with a max count of zero or an initial count greater than the max count.
11 years ago
b181a3af99
Ensure the definition of prvTaskExitError()does not result in a compiler warning in ports where its use can be overridden (GCC Cortex-M ports).
...
Remove duplicate save/restore of r14 in Cortex-M4F ports.
11 years ago
20eb03ed7d
Change behaviour when configUSE_PREEMPTION is 0 (preemption is turned off). See the change history in the next release for details.
...
Remove an erroneous const in the prototype of queue receive/peek functions.
11 years ago
30bc6c01a9
Add ehb instructions back into PIC32 port layer (upon advice).
...
Add configCLEAR_TICK_TIMER_INTERRUPT into PIC32 port layer to allow the timer configuration to be changed without any edits to the port layer being required.
Add prvTaskExitError() into the PIC32 port layer to trap tasks that attempt to exit from their implementing function.
Provide the ability to trap interrupt stack overflows in the PIC32 port.
Radically improve the timing in the Win32 simulator port layer.
11 years ago
40d2e74417
Update some standard demo task implementations so they can be used with the cooperative scheduler.
11 years ago
5aabe4f8fb
Update semtest.c to use xSemaphoreCreateBinary() in place of vSemaphoreCreateBinary.
11 years ago
dcf261a3e6
Add xSemaphoreCreateBinary() so vSemaphoreCreate() can be deprecated.
11 years ago
ca2191c6ee
Ensure PIC32MX MPLAB 8 project builds with XC.
11 years ago
9a0f2bda55
Update PIC32 MPLAB8 project so it builds with the new partest file names.
11 years ago
1b7a2e40a3
Update PIC32MX demo:
...
Change configCHECK_FOR_STACK_OVERFLOW to 3 to also check the interrupt stack.
Add a build configuration to allow use on the PIC32 USBII starter kit.
Increase some delays when talking to the LCD to ensure it always displays correctly.
Rewrite the register test tasks.
11 years ago
2ee43fbc64
Set the MSVC Win32 demo back to create the simply blinky demo by default.
...
Set the MingW Wind32 demo back to include the #error to remind people to run the CreateProjectDirectoryStructure batch file.
11 years ago
73df0ffdff
Update the Eclipse/MingW project to account for the new Win32 simulator port layer (which has better timing).
11 years ago
15d10ce094
Update the main Win32 MSVC demo to account for the changes to the Win32 port layer (more accurate timing).
11 years ago
63bd3ebbef
Remove the SVC handler from the XMC1000 demo as it is no longer used by the Cortex-M0 port layer.
11 years ago
dcd261bb8b
Update the Keil and IAR CM0 port layers to match the changes made to the GCC version.
11 years ago
7bcbef721b
Remove the SVC handler from the SAMD20 FreeRTOSConfig.h as the GCC Cortex-M0 port no longer uses it.
11 years ago
41fe693968
Improve how the scheduler is started in the GCC Cortex-M0 port.
11 years ago
f64acd6a48
Added an additional configASSERT() to test the new eTaskGetState() behaviour (see previous checking comment).
11 years ago
25bab250b6
Added a little intelligence to eTaskGetState() so it can distinguish between a suspended task and a task that is indefinitely blocked on an event.
11 years ago
bafda11518
Remove maths library dependency form SAMD20 project.
11 years ago
a12ea2d212
Update FreeRTOS version number to V7.5.3
...
Update FreeRTOS+CLI version number to V1.0.2
Update FreeRTOS+UDP version number to V1.0.1
11 years ago
94607d83f9
Add workaround to XMC4000 silicon bug to Tasking Cortex-M4F port layer.
11 years ago
c1353bb12d
Complete XMC4000 Tasking project.
11 years ago
b887737c34
Fix broken link in Atmel Studio SAMD20 project.
11 years ago
c09f6e6a9b
Increase minimal stack size for the SAMD20 demo.
11 years ago
dcea05a81c
Complete tidy up of SAMD20 demo.
11 years ago
41a1dc62b7
Complete SAMD20 demo - still needs tidy up.
...
Add comments to the XMC1000 reg test files.
11 years ago
0c56f5018d
Add some defensive programming in the default tickless mode in case the application supplied post tick hook takes a long time to complete.
11 years ago
aedf7824cb
Introduce the prvTaskExitError() function for all ARM_CMn ports.
...
Introduce the configTASK_RETURN_ADDRESS macro for the GCC ARM_CMn ports.
Improve time slippage penalty when entering tickless mode is abandoned.
11 years ago
eaacbb099a
Clear up a few compiler warnings.
...
Correct header comments in the UARTCommandConsole.c file used in the SmartFusion2 demo.
Exercise the new xQueueSpacesAvailable() function in the MSVC demo.
Add defaults for the new traceMALLOC and traceFREE trace macros.
Catch tasks trying to exit their functions in the Cortex-M0 ports.
Add additional comments to timers.c in response to a support forum question.
Initialise _impure_ptr prior to the first task being started.
Prior to V7.5.0 a yield pended in the tick hook would have occurred during the same tick interrupt. Return pdTRUE from xTaskIncrementTick() if a yield is pending to revert to that behaviour.
11 years ago
7ec4773131
Add traceMALLOC() and traceFREE() macros.
11 years ago
23fa077241
Complete CLI demo on SAMD20.
12 years ago
8ffa1b1736
Get CLI functioning in SAMD20 demo.
12 years ago
013a3ef944
Starting point for the SAMD20 demo.
12 years ago
111283a9b2
Finalise XMC4000 GCC demos.
12 years ago
0185643b39
Finalise XMC4000 IAR demos.
12 years ago
1e248417bc
Finalise XMC4000 Keil demos.
12 years ago
db1a5f1553
Add the configUSE_STATS_FORMATTING_FUNCTIONS parameter to a couple of FreeRTOSConfig.h header files that got missed out when the parameter was introduced.
12 years ago
988b0c1678
Remove the math library as a build dependency in the SAM4L demo.
12 years ago
e3b5f36c3a
Move the #error message about running the CreateProjectDirectoryStructure batch file from FreeRTOSConfig.h to main.c so it shows when the batch file has not been executed (XMC4000 Dave and Tasking projects).
12 years ago
1902d2b64a
Add the uxQueueSpacesAvailable() API function.
...
Move a configASSERT() call in timers.c to prevent a "condition is always true" compiler warning.
12 years ago
dd3fdfa9ff
Make self monitoring in QueueSet.c more robust to prevent false positives.
12 years ago
c63a81af99
Enable RX62N_RDK project to build with the blink configuration.
12 years ago
49c602f3df
Add #error into Tasking project to remind users that they need to run the CreateProjectDirectoryStructure batch file.
12 years ago
ae402434f8
Update Keil XMC1000 to later version.
12 years ago
0e28ee90b6
Finalise XMC1000 GCC demos.
12 years ago
42c0ae6bc8
Finalise XMC1000 IAR demos.
12 years ago
a3095b89af
Finalise XMC1000 Keil demos.
12 years ago
8282cc0491
Finalise XMC4000 Dave/GCC demos.
12 years ago
577ff0741d
Finalise XMC4000 Keil demos.
12 years ago
a0a96e52f2
Finalise XMC4000 IAR demos.
12 years ago
41f92ced65
Add build configurations for the XMC4400 and XMC4200 to the Tasking demo project.
12 years ago
77d817ffaa
Update XMC4000 tasking project to use latest system files.
12 years ago
7d92a29d2d
Rename directories with XMC4500 in their name that now contain XMC4200 and XMC4000 build configurations to instead say XMC4000.
12 years ago
117235c08a
Rename directories with XMC4500 in their name that now contain XMC4200 and XMC4000 build configurations to instead say XMC4000.
12 years ago
d8963209c2
Reworked XMC4500 IAR project to use latest system files and include build configurations for the XMC4200 and XMC4400 parts.
12 years ago
aaf2d32011
Add XMC4200 and XMC4400 build configurations to the XMC4000 Dave project.
12 years ago
6acac72ff1
Add Dave project for the XMC4500.
12 years ago
d1d925ab36
Update the Keil XMC4500 demo project to include build configurations for the XMC4200 and XMC4400 application boards.
12 years ago
18c4f8e622
Make the QueueSet.c standard demo task a little friendlier to lower priority tasks.
...
Allow the priority of the controlling task in the recmutex.c standard demo tasks to be overridden by a setting in FreeRTOSConfig.h.
12 years ago
a8c2c6b3b6
Add a build configuration for the XMC1100 boot kit.
12 years ago
05e0c59da8
Update RX600/Renesas compiler build configurations to use the latest compiler version.
12 years ago
316b731fe9
Update RX600 blinky build configuration to include missing linker section.
12 years ago
b79d3de952
Continue work on XMC1000 demos.
12 years ago
73606369c4
Make Cortex-M0 set/clear interrupt flag from ISR functions nestable.
...
Don't reset the stack location when starting the scheduler in Cortex-M0 ports as the vector offset register is not implemented and XMC1000 devices have their application vector address somewhere other than 0x00.
12 years ago
ed399e801e
Add additional configASSERTS() to some standard demo tasks.
...
Use own rand() function in QueueSet.c to prevent library versions being referenced.
12 years ago
33bd63e287
Rename CORTEX_M)_Infineion_Boot_Kits_IAR_Keil to CORTEX_M0_Infineon_XMC1000_IAR_Keil_GCC as it now contains projects for all three compilers.
12 years ago
245ff12be8
Add a GCC project to the the XMC1000 demo directory.
12 years ago
f9e024d7ea
Move files common to IAR and Keil projects from compiler specific directories under the XMC demo directory into the XMC demo directory itself.
12 years ago
9ad0c17281
Continue work on Get clock settings in Keil and IAR XMC1000 demo working.
12 years ago
710a652daf
Continue work on XCM1200 Keil demo.
12 years ago
f0a2688200
Create full Keil project for XMC boot kit (not yet tested).
12 years ago
3fe6974bf9
Starting point for XMC1000 Keil demo.
12 years ago
574f5044a6
Starting point for Keil Cortex-M0 port.
12 years ago
c40370e96a
Fix a few typos and remove the "register" keyword.
12 years ago
63e8044d33
Allow compilation when portALT_GET_RUN_TIME_COUNTER_VALUE() is defined.
12 years ago
2f754d9b0c
Add additional critical section to the default tickless implementations.
...
Update version number for maintenance release.
12 years ago
3cbe0a724d
Update version number.
12 years ago
8ceb665994
Void a few unused return values and make casting more C++ friendly.
12 years ago
bb2093cf5d
Update the header file included in the PIC32 port_asm.S file to use the header for the latest compiler version.
12 years ago
679a3c670c
Update the Cortex-M vPortValidateInterruptPriority() implementation to ensure compatibility with the STM32 standard peripheral library.
12 years ago
f522d6a2da
Remove duplicate definition from FreeRTOSConfig.h.
12 years ago
Richard Barry