3a3d061cc5
Continue working on the GIC-less Cortex-A5 port for IAR:
...
- Add in the assert when a task attempts to exit its implementing function without deleting itself.
- Remove obsolete code from the context switch asm code (obsoleted by the fact that there is no mask register).
- Attempt to make code more generic by using definitions for additional register addresses.
11 years ago
e9b5deb34a
Carry on working on SAMA5D3 demo:
...
- Add full interrupt nesting tests.
- Add additional critical section/context switching tests.
- Set interrupt priorities so everything can run at once without any software watchdog errors.
- Re-enable interrupts in each IRQ handler.
- Add in run-time stats.
11 years ago
146b46df87
SAMA5D3 demo: Add CDC driver code and use CDC to create a simple command console.
11 years ago
5fcd270398
Re-test Zynq demo now it is using the latest tools.
11 years ago
bd9d37924d
Add back Zynq demo - this time using SDK V14.2.
11 years ago
96ceb9f537
Remove Zynq demo project ready to recreate the project using the 14.2 version of Xilinx's SDK.
11 years ago
5b96cf6eea
Add 'full' demo to the SAMA5 Xplained demo - but so far without interrupt nesting tests or CLI.
11 years ago
8ad9b75810
Rename ARM_CAx_No_GIC ARM_CA5_No_GIC and add FreeRTOSConfig setting to specify the number of registers in the FPU unit.
11 years ago
29336e35b5
SAMA5D3 Xplained demo blinky running.
11 years ago
f4a1a7d577
Add new port layer for Cortex-A devices without the means to mask interrupt priorities.
11 years ago
5b96c12e92
Start of SAMA5D3 XPlained demo.
11 years ago
8aa5fa3459
Make the parameters to vPortDefineHeapRegions() const.
...
Add additional asserts to the Keil CM3 and CM4F ports (other CM3/4 ports already updated).
Add the additional yield necessitated by the mutex held count to the case when configUSE_QUEUE_SETS is 0.
11 years ago
4fe2abc792
Update the MSVC simulator demo to demonstrate heap_5 allocator and pdTICKS_TO_MS macro being used.
11 years ago
d96dc2adb0
Simply some of the alignment calculations in heap_4.c to match those used in heap_5.c.
...
Remove some apparently obsolete code from xTaskPriorityDisinherit() (a task cannot be both blocked and giving bac a mutex at the same time].
Update the new "mutex held count" increment and decrement functions to allow mutexes to be created before the scheduler is started.
11 years ago
b0ba273489
Check in the portable.h version required to use heap_5.c.
11 years ago
4b26dc0614
Check in the new memory allocator that allows the heap to span multiple blocks.
11 years ago
4ce4de750a
Update timer demo in PIC32MZ demo to remove multiple extern definition created by adding in the macro that checks non ISR safe functions are not called from ISRs.
11 years ago
42b1688a30
Implementation of mutex held counting in tasks.c - needs optimisation before release.
11 years ago
583b144bc3
Default the definition of portASSERT_IF_IN_ISR() to nothing if it is not defined.
...
Helper updates to allow a count of the number of mutexes held to be added.
Updates to the CCS Cortex-R4 implementation necessitated by a change in compiler semantics.
Update PIC32MX and MZ ports to assert if a non ISR safe function is called from an ISR.
11 years ago
b4659d8872
Add code to assert() if non ISR safe API function is called from ISR in Tasking CM4F ports - plus fix bug where the max syscall interrupt priority was used incorrectly in the Tasking CM4F port.
11 years ago
113220628f
Add code to assert() if non ISR safe API function is called from ISR in IAR and GCC CM3 and CM4F ports - Keil and tasking to follow.
11 years ago
4723209074
Simplify the assert that checks if a non-ISR safe function is called from an ISR in the GCC Cortex-A9 port.
11 years ago
d45f18cc8d
Add additional comments to the Zynq lwIP demo.
11 years ago
8426eba8e7
Added portASSERT_IF_IN_INTERRUPT() macro to the GCC Cortex A9 port layer.
11 years ago
de7df3cfda
Zynq demo: Fix Xilinx network driver by deferring the function that allocated memory from the interrupt into a task. Add DHCP option.
11 years ago
f1a0534a56
Remove some of the lwip asserts to allow use with 64-bit alignment.
11 years ago
7fa64efeeb
Switch to using the private watchdog as the run time stats timer in the Zynq demo.
11 years ago
2f6cb8a86c
Reorganise Zynq project after spitting lwIP example into a separate configuration.
11 years ago
e92795bcc8
Move the Zynq's lwIP example from the Full demo into its own configuration as having the lwIP tasks at a high priority made the self checking test tasks report failures, while having the lwIP tasks at a low priority slugged the throughput.
11 years ago
be8b0ed21d
Update lwIP byte alignment to make Zynq pings more reliable.
11 years ago
16ff69e873
Update RL78 GCC demo application after testing with fixed compiler.
11 years ago
9efb5c8b2f
Check in RL78 GCC port layer now it has been verified with the fixed compiler.
11 years ago
5cbab67186
Complete RX64M GCC demo.
11 years ago
1130a53ec8
Reverse order of projdefs.h and FreeRTOSConfig.h includes in FreeRTOS.h to allow addition of pdMS_TO_TICKS() macro.
...
Update RXv2 GCC port to match RXv2 Renesas port.
11 years ago
5cd0b1e5ef
Add -nomessage command line option to RX64M demo to suppress warning about the yield function being defined when it is not called directly.
11 years ago
f46070dc79
Ensure demo app files are using FreeRTOS V8 names - a few were missed previously.
11 years ago
ef254df85f
A few additional casts to keep the Renesas RX compiler happy.
11 years ago
74ffdb0b89
Add lwIP driver into Zynq demo - not yet fully functional.
11 years ago
09a89763ee
Add brackets in lwIP assert statement to prevent compiler warnings.
11 years ago
b215310e63
Add some missing volatiles to __asm statements in the CA9 GCC port.
11 years ago
0bb794301a
Update version number ready for release.
11 years ago
911e82a909
Add xQueueGetMutexHolder() to MPU functions.
11 years ago
f25503977e
Event Groups: Convert the 'clear bits from ISR' function into a pended function to fix reentrancy issue.
...
Event Groups: Ensure the 'wait bits' and 'sync' functions don't return values that still contain some internal control bits.
11 years ago
fa7222ab4a
Update demos that use FreeRTOS+FAT SL to have correct version numbers after the update of FreeRTOS+FAT SL itself.
11 years ago
03c95b5950
Update IAR XMC4200 project to fix link error that resulted from updating the IAR version to 7.x.
11 years ago
6af9b013eb
Ensure xNewLib_reent is reclaimed when a task is deleted.
11 years ago
82207ebffa
Add test and correct code for the unusual case of a task using an event group to synchronise only with itself.
...
Add critical sections around call to prvResetNextTaskUnblockTime() that can occur from within a task.
11 years ago
ef7f3c5320
Add the pcTimerGetTimerName() API function.
11 years ago
887fcd04f4
Add interrupt nesting test code into RX64M demo.
11 years ago
42cbd6a778
Add RSK definition and LED flash tasks into RX64M demo.
11 years ago
29a08b5e24
Update Cortex-A port layers to ensure the ICCRPR and ICCPMR registers are always accessed as 32-bit values.
11 years ago
d59bf60ff9
Started to create RX64M GCC project - building but not yet converted to new core.
11 years ago
6fe7e7ef67
Delete old RL78 launch configurations.
11 years ago
7f7ad3d081
Add RL78/L1C configuration into e2studio demo.
11 years ago
2283bfb0ae
RL78/L1C configuration added to the IAR RL78 demo projects.
11 years ago
a5f00caf16
Working but incomplete RXv2 demo.
11 years ago
05a0e4379e
First pass at RXv2 port layer.
11 years ago
3788026636
RXv1 tests running before updating to RXv2.
11 years ago
b17ab311af
Start to create an RX64M demo.
11 years ago
9bd5e5cf03
Cast away a few unused return types to ensure lint/compilers don't generate warnings when the warning level is high.
11 years ago
c8953a68cd
Add extra #error message as a configuration sanity check.
11 years ago
ba6d285ea8
Minor updates to ensure all kernel aware debuggers are happy with V8.
11 years ago
e101e7e437
Update version number to V8.0.0 (without the release candidate number).
11 years ago
38ae9b76bc
Add logic to determine the tick timer source and vector installation into the PIC32MZ port assembly file to allow more efficient interrupt entry.
11 years ago
c3dd6f6593
Add event group code to the PIC32MZ demo.
11 years ago
0f6b699eef
Linting.
11 years ago
a2089bbcf6
Add #define INCLUDE_eTaskGetState 1 to the demos that use the int queue test.
11 years ago
d6da7b1231
Remove test of trace functions from the Win32/GCC build as it messes up the trace recorder.
11 years ago
0ccfdd1021
Remove test of trace functions from the Win32 build as it messes up the trace recorder.
11 years ago
853696a991
Add event groups demo to SAM4E demo.
11 years ago
b7eb76904a
Add event group tests to IAR LM3S demo.
11 years ago
e4dbc6b770
Make xEventGroupSetBitsFromISR() a function when configUSE_TRACE_FACILITY is enabled to allow the inclusion of a trace macro.
11 years ago
b96016e234
Follow instructions on http://blogs.msdn.com/b/vsproject/archive/2009/07/21/enable-c-project-system-logging.aspx to manually prevent MSVC from incorrectly reporting the MSVC demo project as being out of date.
11 years ago
5a2a8fc319
Update the demo directory to use the version 8 type naming conventions.
11 years ago
c6d8892b0d
Replace xTaskIsTaskSuspended() call with eTaskGetState() call in IntQueue.c as the former is now a private function.
11 years ago
4f01401c00
Add a small amount of randomisation into the Zynq demo.
11 years ago
0cc51d99a7
Add event groups demo to Zynq demo.
...
Add C implementations of some standard library functions to the Zynq demo to prevent the GCC libraries (which use floating point registers as scratch registers) being linked in.
11 years ago
3eb212f454
Update IAR RL78 demo regtest tasks to make use of SKZ instructions as the latest IAR linker didn't seem to like the previous version.
11 years ago
84f4ae9aa0
Make xTaskIsTaskSuspended() a private function as it should only be called from within critical sections.
...
Fix issue in and simplify the xTaskRemoveFromUnorderedEventList() function. The function is new to the V8 release candidates so does not effect official released code.
11 years ago
eea669240b
Remove inclusion of now removed header file from the RZ/IAR LowLevelInitialise.c file.
11 years ago
d4ca65f22f
Third attempt: Improve how TimerDemo.c manages differences between the tick count and its own internal tick count, which can temporarily differ when the tick hook is called while the scheduler is suspended.
11 years ago
660162a5b8
Update the Win32/MingW demo to match the latest Win32/MSVC demo.
11 years ago
d12ec14160
Add configCLEAR_TICK_INTERRUPT() to the IAR and RVDS Cortex-A9 ports.
...
Replace LDMFD with POP instructions in IAR and RVDS Cortex-A9 ports.
Replace branch to address with indirect branch and exchange to address in register in the IAR and RVDS Cortex-A9 ports.
11 years ago
9a8da3ff38
Second attempt: Improve how TimerDemo.c manages differences between the tick count and its own internal tick count, which can temporarily differ when the tick hook is called while the scheduler is suspended.
11 years ago
03f9bbda52
Improve how TimerDemo.c manages differences between the tick count and its own internal tick count, which can temporarily differ when the tick hook is called while the scheduler is suspended.
11 years ago
481db56078
Related to Zynq demo: Remove compiler warnings when configASSERT() is not defined and set the type of the assembly functions to allow them to be called when the C code is compiled to THUMB instructions.
11 years ago
f843888e60
Complete GCC/Cortex-A9 port.
11 years ago
c83414ccc4
Finish the Zynq demo.
11 years ago
2fc4e89b98
Add in interrupt nesting test.
11 years ago
d898d16c44
Check in working IntQueueTimer.c for Zynq before overhauling to ensure it conforms to the FreeRTOS style and coding standard.
11 years ago
6c72f470ac
Update Zynq serial.c to be interrupt driven.
11 years ago
d310ac4552
Add very basic serial CLI to the Zynq demo - needs a lot of tidy up yet!
11 years ago
51ea2639a9
vQueueAddToRegistry() now takes a const char * instead of a char *.
...
tmrCOMMAND_CHANGE_PERIOD_FROM_ISR constant added for the "FromISR" version of the software timer change period API function.
11 years ago
0bf2e615b2
Uncheck the "Do not search standard system directories for header files" compiler option in two RX600 project to ensure stdint.h can be found correctly.
11 years ago
6130fec60e
Introduce xTimerPendFunctionCall().
...
Change INCLUDE_xTimerPendFunctionCallFromISR to INCLUDE_xTimerPendFunctionCall
Update event group trace macros to match the new trace recorder code.
Ensure parameter name consistency by renaming any occurrences of xBlockTime and xBlockTimeTicks to xTicksToWait.
Continue work on GCC/RL78 port - still a work in progress.
Adjust how the critical section was used in xQueueAddToSet.
11 years ago
888733ef79
Add main_full.c to Zynq demo. Still a work in progress.
11 years ago
b352be2e23
Tidy up GCC Cortex-A port layer - still a work in progress.
11 years ago
14f895478d
Continue work on GCC/Cortex-A port layer.
11 years ago
4c9b5d88ae
Continue Zynq demo - ParTest.c now working (with single LED), but still very much a work in progress.
11 years ago
1e26b1875f
Remove #error that attempted to catch stdint.h not being included.
...
Split the previously overloaded trmCOMMAND_nnn definitions into individual definitions to enable better logging.
11 years ago
Richard Barry