Work in progress - checked in for backup only.
Richard Barry
15 years ago
parent
02db572328
commit
e03f239692
@ -0,0 +1,214 @@
|
||||
/*
|
||||
FreeRTOS V6.0.5 - Copyright (C) 2010 Real Time Engineers Ltd.
|
||||
|
||||
***************************************************************************
|
||||
* *
|
||||
* If you are: *
|
||||
* *
|
||||
* + New to FreeRTOS, *
|
||||
* + Wanting to learn FreeRTOS or multitasking in general quickly *
|
||||
* + Looking for basic training, *
|
||||
* + Wanting to improve your FreeRTOS skills and productivity *
|
||||
* *
|
||||
* then take a look at the FreeRTOS eBook *
|
||||
* *
|
||||
* "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
|
||||
* http://www.FreeRTOS.org/Documentation *
|
||||
* *
|
||||
* A pdf reference manual is also available. Both are usually delivered *
|
||||
* to your inbox within 20 minutes to two hours when purchased between 8am *
|
||||
* and 8pm GMT (although please allow up to 24 hours in case of *
|
||||
* exceptional circumstances). Thank you for your support! *
|
||||
* *
|
||||
***************************************************************************
|
||||
|
||||
This file is part of the FreeRTOS distribution.
|
||||
|
||||
FreeRTOS is free software; you can redistribute it and/or modify it under
|
||||
the terms of the GNU General Public License (version 2) as published by the
|
||||
Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
|
||||
***NOTE*** The exception to the GPL is included to allow you to distribute
|
||||
a combined work that includes FreeRTOS without being obliged to provide the
|
||||
source code for proprietary components outside of the FreeRTOS kernel.
|
||||
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
|
||||
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
more details. You should have received a copy of the GNU General Public
|
||||
License and the FreeRTOS license exception along with FreeRTOS; if not it
|
||||
can be viewed here: http://www.freertos.org/a00114.html and also obtained
|
||||
by writing to Richard Barry, contact details for whom are available on the
|
||||
FreeRTOS WEB site.
|
||||
|
||||
1 tab == 4 spaces!
|
||||
|
||||
http://www.FreeRTOS.org - Documentation, latest information, license and
|
||||
contact details.
|
||||
|
||||
http://www.SafeRTOS.com - A version that is certified for use in safety
|
||||
critical systems.
|
||||
|
||||
http://www.OpenRTOS.com - Commercial support, development, porting,
|
||||
licensing and training services.
|
||||
*/
|
||||
|
||||
#include <string.h>
|
||||
|
||||
#include "FreeRTOS.h"
|
||||
#include "CircularBuffer.h"
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* See the header file for function information. */
|
||||
void vInitialiseCircularBuffer( xCircularBuffer *pxBuffer,
|
||||
unsigned char *pucDataBuffer,
|
||||
unsigned long ulBufferSizeInBytes,
|
||||
unsigned long ulDataSizeInBytes,
|
||||
void *pvTag
|
||||
)
|
||||
{
|
||||
pxBuffer->pucDataBuffer = pucDataBuffer;
|
||||
pxBuffer->ulBufferSizeInBytes = ulBufferSizeInBytes;
|
||||
pxBuffer->pucNextByteToRead = pucDataBuffer;
|
||||
pxBuffer->pucNextByteToWrite = pucDataBuffer;
|
||||
pxBuffer->ulDataSizeInBytes = ulDataSizeInBytes;
|
||||
pxBuffer->pvTag = pvTag;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* See the header file for function information. */
|
||||
unsigned long ulBytesInCircularBuffer( const xCircularBuffer * const pxBuffer )
|
||||
{
|
||||
unsigned char *pucNextByteToWrite;
|
||||
unsigned long ulReturn;
|
||||
|
||||
if( pxBuffer->pvTag != NULL )
|
||||
{
|
||||
/* Locate the position that the DMA will next write to. */
|
||||
pucNextByteToWrite = ( unsigned char * ) *( ( unsigned long * ) pxBuffer->pvTag );
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Locate the position the application will next write to. */
|
||||
pucNextByteToWrite = pxBuffer->pucNextByteToWrite;
|
||||
}
|
||||
|
||||
/* Has the write pointer wrapped back to the start of the buffer
|
||||
compared to our read pointer? */
|
||||
if( ( unsigned long ) pucNextByteToWrite >= ( unsigned long ) pxBuffer->pucNextByteToRead )
|
||||
{
|
||||
/* The write pointer is still ahead of us in the buffer. The amount of
|
||||
data available is simple the gap between the two pointers. */
|
||||
ulReturn = ( unsigned long ) pucNextByteToWrite - ( unsigned long ) pxBuffer->pucNextByteToRead;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* The write pointer has wrapped back to the start. The amount of data
|
||||
available is equal to the data between the read pointer and the end of
|
||||
the buffer...*/
|
||||
ulReturn = ( unsigned long ) &( pxBuffer->pucDataBuffer[ pxBuffer->ulBufferSizeInBytes ] ) - ( unsigned long ) pxBuffer->pucNextByteToRead;
|
||||
|
||||
/*... plus the data between the start of the buffer and the write
|
||||
pointer. */
|
||||
ulReturn += ( unsigned long ) pucNextByteToWrite - ( unsigned long ) pxBuffer->pucDataBuffer;
|
||||
}
|
||||
|
||||
return ulReturn;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
unsigned long ulCopyReceivedBytes( xCircularBuffer *pxBuffer, unsigned char * pucBuffer, unsigned long ulWantedBytes )
|
||||
{
|
||||
unsigned char *pucNextByteToWrite;
|
||||
unsigned long ulNumberOfBytesRead = 0, ulNumberOfBytesAvailable;
|
||||
|
||||
if( pxBuffer->pvTag != NULL )
|
||||
{
|
||||
/* Locate the position that the DMA will next write to. */
|
||||
pucNextByteToWrite = ( unsigned char * ) *( ( unsigned long * ) pxBuffer->pvTag );
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Locate the position that the application will next write to. */
|
||||
pucNextByteToWrite = pxBuffer->pucNextByteToWrite;
|
||||
}
|
||||
|
||||
if( ( unsigned long ) pucNextByteToWrite >= ( unsigned long ) pxBuffer->pucNextByteToRead )
|
||||
{
|
||||
/* The write pointer has not wrapped around from our read pointer.
|
||||
|
||||
Clip the number of bytes to read to the number available if the number
|
||||
available is less than that wanted. */
|
||||
ulNumberOfBytesAvailable = ( unsigned long ) pucNextByteToWrite - ( unsigned long ) ( pxBuffer->pucNextByteToRead );
|
||||
|
||||
if( ulNumberOfBytesAvailable < ulWantedBytes )
|
||||
{
|
||||
ulWantedBytes = ulNumberOfBytesAvailable;
|
||||
}
|
||||
|
||||
/* Copy the data from ulRxBuffer into the application buffer. */
|
||||
memcpy( pucBuffer, pxBuffer->pucNextByteToRead, ulWantedBytes );
|
||||
|
||||
/* Move up our read buffer. */
|
||||
pxBuffer->pucNextByteToRead += ulWantedBytes;
|
||||
ulNumberOfBytesRead = ulWantedBytes;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* The write pointer has wrapped around from our read pointer. Is there
|
||||
enough space from our read pointer to the end of the buffer without the
|
||||
read pointer also wrapping around? */
|
||||
ulNumberOfBytesAvailable = ( unsigned long ) &( pxBuffer->pucDataBuffer[ pxBuffer->ulBufferSizeInBytes ] ) - ( unsigned long ) pxBuffer->pucNextByteToRead;
|
||||
|
||||
if( ulNumberOfBytesAvailable >= ulWantedBytes )
|
||||
{
|
||||
/* There is enough space from our current read pointer up to the end
|
||||
of the buffer to obtain the number of bytes requested. */
|
||||
memcpy( pucBuffer, pxBuffer->pucNextByteToRead, ulWantedBytes );
|
||||
|
||||
/* Move up our read buffer. */
|
||||
pxBuffer->pucNextByteToRead += ulWantedBytes;
|
||||
ulNumberOfBytesRead = ulWantedBytes;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* There is not enough space up to the end of the buffer to obtain
|
||||
the number of bytes requested. Copy up to the end of the buffer. */
|
||||
memcpy( pucBuffer, pxBuffer->pucNextByteToRead, ulNumberOfBytesAvailable );
|
||||
ulNumberOfBytesRead = ulNumberOfBytesAvailable;
|
||||
|
||||
/* Then wrap back to the beginning of the buffer to attempt to
|
||||
read the remaining bytes. */
|
||||
pxBuffer->pucNextByteToRead = pxBuffer->pucDataBuffer;
|
||||
pucBuffer += ulNumberOfBytesAvailable;
|
||||
|
||||
/* How many more bytes do we want to read? */
|
||||
ulWantedBytes -= ulNumberOfBytesAvailable;
|
||||
|
||||
/* Clip the number of bytes we are going to read to the number
|
||||
available if this is less than the number we want. */
|
||||
ulNumberOfBytesAvailable = ( unsigned long ) pucNextByteToWrite - ( unsigned long ) pxBuffer->pucNextByteToRead;
|
||||
|
||||
if( ulNumberOfBytesAvailable < ulWantedBytes )
|
||||
{
|
||||
ulWantedBytes = ulNumberOfBytesAvailable;
|
||||
}
|
||||
|
||||
/* Copy these into the buffer. */
|
||||
memcpy( pucBuffer, pxBuffer->pucNextByteToRead, ulWantedBytes );
|
||||
|
||||
/* Move up our read buffer. */
|
||||
pxBuffer->pucNextByteToRead += ulWantedBytes;
|
||||
ulNumberOfBytesRead += ulWantedBytes;
|
||||
}
|
||||
}
|
||||
|
||||
/* Check we have not moved our read pointer off the end of the buffer. */
|
||||
if( ( unsigned long ) pxBuffer->pucNextByteToRead >= ( unsigned long ) &( pxBuffer->pucDataBuffer[ pxBuffer->ulBufferSizeInBytes ] ) )
|
||||
{
|
||||
pxBuffer->pucNextByteToRead = pxBuffer->pucDataBuffer;
|
||||
}
|
||||
|
||||
/* Return the number of bytes read. */
|
||||
return ulNumberOfBytesRead;
|
||||
}
|
||||
|
||||
@ -0,0 +1,115 @@
|
||||
/*
|
||||
FreeRTOS V6.0.5 - Copyright (C) 2010 Real Time Engineers Ltd.
|
||||
|
||||
***************************************************************************
|
||||
* *
|
||||
* If you are: *
|
||||
* *
|
||||
* + New to FreeRTOS, *
|
||||
* + Wanting to learn FreeRTOS or multitasking in general quickly *
|
||||
* + Looking for basic training, *
|
||||
* + Wanting to improve your FreeRTOS skills and productivity *
|
||||
* *
|
||||
* then take a look at the FreeRTOS eBook *
|
||||
* *
|
||||
* "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
|
||||
* http://www.FreeRTOS.org/Documentation *
|
||||
* *
|
||||
* A pdf reference manual is also available. Both are usually delivered *
|
||||
* to your inbox within 20 minutes to two hours when purchased between 8am *
|
||||
* and 8pm GMT (although please allow up to 24 hours in case of *
|
||||
* exceptional circumstances). Thank you for your support! *
|
||||
* *
|
||||
***************************************************************************
|
||||
|
||||
This file is part of the FreeRTOS distribution.
|
||||
|
||||
FreeRTOS is free software; you can redistribute it and/or modify it under
|
||||
the terms of the GNU General Public License (version 2) as published by the
|
||||
Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
|
||||
***NOTE*** The exception to the GPL is included to allow you to distribute
|
||||
a combined work that includes FreeRTOS without being obliged to provide the
|
||||
source code for proprietary components outside of the FreeRTOS kernel.
|
||||
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
|
||||
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
more details. You should have received a copy of the GNU General Public
|
||||
License and the FreeRTOS license exception along with FreeRTOS; if not it
|
||||
can be viewed here: http://www.freertos.org/a00114.html and also obtained
|
||||
by writing to Richard Barry, contact details for whom are available on the
|
||||
FreeRTOS WEB site.
|
||||
|
||||
1 tab == 4 spaces!
|
||||
|
||||
http://www.FreeRTOS.org - Documentation, latest information, license and
|
||||
contact details.
|
||||
|
||||
http://www.SafeRTOS.com - A version that is certified for use in safety
|
||||
critical systems.
|
||||
|
||||
http://www.OpenRTOS.com - Commercial support, development, porting,
|
||||
licensing and training services.
|
||||
*/
|
||||
|
||||
#ifndef CIRCULAR_BUFFER_H
|
||||
#define CIRCULAR_BUFFER_H
|
||||
|
||||
/* Structure that holds the state of the circular buffer. */
|
||||
typedef struct
|
||||
{
|
||||
unsigned char *pucDataBuffer;
|
||||
unsigned long ulBufferSizeInBytes;
|
||||
unsigned char *pucNextByteToRead;
|
||||
unsigned char *pucNextByteToWrite;
|
||||
unsigned long ulDataSizeInBytes;
|
||||
void *pvTag;
|
||||
} xCircularBuffer;
|
||||
|
||||
|
||||
/*
|
||||
* Setup a circular buffer ready for use.
|
||||
*
|
||||
* pxBuffer : The xCicularBuffer structure being initialised.
|
||||
*
|
||||
* pucDataBuffer : The buffer to be used by the xCicularBuffer object.
|
||||
*
|
||||
* ulBufferSizeInBytes : The dimention of pucDataBuffer in bytes.
|
||||
*
|
||||
* ulDataSizeInBytes : The size of the data that is to be stored in the
|
||||
* circular buffer. For example, 4 if the buffer is used to hold
|
||||
* unsigned longs, 1 if the buffer is used to hold chars.
|
||||
*
|
||||
* pvTag : Can be used for anything, although normally used in conjunction with
|
||||
* a DMA register.
|
||||
*/
|
||||
void vInitialiseCircularBuffer( xCircularBuffer *pxBuffer,
|
||||
unsigned char *pucDataBuffer,
|
||||
unsigned long ulBufferSizeInBytes,
|
||||
unsigned long ulDataSizeInBytes,
|
||||
void *pvTag
|
||||
);
|
||||
/*
|
||||
* Returns the number of bytes that are currently available within the
|
||||
* buffer.
|
||||
*/
|
||||
unsigned long ulBytesInCircularBuffer( const xCircularBuffer * const pxBuffer );
|
||||
|
||||
/*
|
||||
* Obtain bytes from the circular buffer. Data may have been placed in
|
||||
* the circular buffer by a DMA transfer or simply written to the buffer by
|
||||
* the application code.
|
||||
*
|
||||
* pxBuffer : The circular buffer from which data is to be read.
|
||||
*
|
||||
* pucBuffer : The buffer into which the received bytes should be copied.
|
||||
*
|
||||
* ulWantedBytes : The number of bytes we are going to attempt to receive
|
||||
* from the circular buffer.
|
||||
*
|
||||
* return : The actual number of bytes received from the circular buffer.
|
||||
* This might be less than the number of bytes we attempted to receive.
|
||||
*/
|
||||
unsigned long ulCopyReceivedBytes( xCircularBuffer *pxBuffer, unsigned char * pucBuffer, unsigned long ulWantedBytes );
|
||||
|
||||
#endif
|
||||
|
||||
@ -0,0 +1,482 @@
|
||||
/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
|
||||
* File Name : spi_flash.c
|
||||
* Author : MCD Application Team
|
||||
* Version : V2.0.0
|
||||
* Date : 04/27/2009
|
||||
* Description : This file provides a set of functions needed to manage the
|
||||
* communication between SPI peripheral and SPI M25P64 FLASH.
|
||||
********************************************************************************
|
||||
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
*******************************************************************************/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "spi_flash.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
#define SPI_FLASH_PageSize 0x100
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
#define WRITE 0x02 /* Write to Memory instruction */
|
||||
#define WRSR 0x01 /* Write Status Register instruction */
|
||||
#define WREN 0x06 /* Write enable instruction */
|
||||
|
||||
#define READ 0x03 /* Read from Memory instruction */
|
||||
#define RDSR 0x05 /* Read Status Register instruction */
|
||||
#define RDID 0x9F /* Read identification */
|
||||
#define SE 0xD8 /* Sector Erase instruction */
|
||||
#define BE 0xC7 /* Bulk Erase instruction */
|
||||
|
||||
#define WIP_Flag 0x01 /* Write In Progress (WIP) flag */
|
||||
|
||||
#define Dummy_Byte 0xA5
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_Init
|
||||
* Description : Initializes the peripherals used by the SPI FLASH driver.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void SPI_FLASH_Init(void)
|
||||
{
|
||||
SPI_InitTypeDef SPI_InitStructure;
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
|
||||
/* Enable SPI1 and GPIO clocks */
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1 | RCC_APB2Periph_GPIOA |
|
||||
RCC_APB2Periph_GPIO_CS, ENABLE);
|
||||
|
||||
/* Configure SPI1 pins: SCK, MISO and MOSI */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
/* Configure I/O for Flash Chip select */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_CS;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
|
||||
GPIO_Init(GPIO_CS, &GPIO_InitStructure);
|
||||
|
||||
/* Deselect the FLASH: Chip Select high */
|
||||
SPI_FLASH_CS_HIGH();
|
||||
|
||||
/* SPI1 configuration */
|
||||
SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
|
||||
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
|
||||
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
|
||||
SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
|
||||
SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
|
||||
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
|
||||
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
|
||||
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
|
||||
SPI_InitStructure.SPI_CRCPolynomial = 7;
|
||||
SPI_Init(SPI1, &SPI_InitStructure);
|
||||
|
||||
/* Enable SPI1 */
|
||||
SPI_Cmd(SPI1, ENABLE);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_SectorErase
|
||||
* Description : Erases the specified FLASH sector.
|
||||
* Input : SectorAddr: address of the sector to erase.
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void SPI_FLASH_SectorErase(uint32_t SectorAddr)
|
||||
{
|
||||
/* Send write enable instruction */
|
||||
SPI_FLASH_WriteEnable();
|
||||
|
||||
/* Sector Erase */
|
||||
/* Select the FLASH: Chip Select low */
|
||||
SPI_FLASH_CS_LOW();
|
||||
/* Send Sector Erase instruction */
|
||||
SPI_FLASH_SendByte(SE);
|
||||
/* Send SectorAddr high nibble address byte */
|
||||
SPI_FLASH_SendByte((SectorAddr & 0xFF0000) >> 16);
|
||||
/* Send SectorAddr medium nibble address byte */
|
||||
SPI_FLASH_SendByte((SectorAddr & 0xFF00) >> 8);
|
||||
/* Send SectorAddr low nibble address byte */
|
||||
SPI_FLASH_SendByte(SectorAddr & 0xFF);
|
||||
/* Deselect the FLASH: Chip Select high */
|
||||
SPI_FLASH_CS_HIGH();
|
||||
|
||||
/* Wait the end of Flash writing */
|
||||
SPI_FLASH_WaitForWriteEnd();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_BulkErase
|
||||
* Description : Erases the entire FLASH.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void SPI_FLASH_BulkErase(void)
|
||||
{
|
||||
/* Send write enable instruction */
|
||||
SPI_FLASH_WriteEnable();
|
||||
|
||||
/* Bulk Erase */
|
||||
/* Select the FLASH: Chip Select low */
|
||||
SPI_FLASH_CS_LOW();
|
||||
/* Send Bulk Erase instruction */
|
||||
SPI_FLASH_SendByte(BE);
|
||||
/* Deselect the FLASH: Chip Select high */
|
||||
SPI_FLASH_CS_HIGH();
|
||||
|
||||
/* Wait the end of Flash writing */
|
||||
SPI_FLASH_WaitForWriteEnd();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_PageWrite
|
||||
* Description : Writes more than one byte to the FLASH with a single WRITE
|
||||
* cycle(Page WRITE sequence). The number of byte can't exceed
|
||||
* the FLASH page size.
|
||||
* Input : - pBuffer : pointer to the buffer containing the data to be
|
||||
* written to the FLASH.
|
||||
* - WriteAddr : FLASH's internal address to write to.
|
||||
* - NumByteToWrite : number of bytes to write to the FLASH,
|
||||
* must be equal or less than "SPI_FLASH_PageSize" value.
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void SPI_FLASH_PageWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite)
|
||||
{
|
||||
/* Enable the write access to the FLASH */
|
||||
SPI_FLASH_WriteEnable();
|
||||
|
||||
/* Select the FLASH: Chip Select low */
|
||||
SPI_FLASH_CS_LOW();
|
||||
/* Send "Write to Memory " instruction */
|
||||
SPI_FLASH_SendByte(WRITE);
|
||||
/* Send WriteAddr high nibble address byte to write to */
|
||||
SPI_FLASH_SendByte((WriteAddr & 0xFF0000) >> 16);
|
||||
/* Send WriteAddr medium nibble address byte to write to */
|
||||
SPI_FLASH_SendByte((WriteAddr & 0xFF00) >> 8);
|
||||
/* Send WriteAddr low nibble address byte to write to */
|
||||
SPI_FLASH_SendByte(WriteAddr & 0xFF);
|
||||
|
||||
/* while there is data to be written on the FLASH */
|
||||
while (NumByteToWrite--)
|
||||
{
|
||||
/* Send the current byte */
|
||||
SPI_FLASH_SendByte(*pBuffer);
|
||||
/* Point on the next byte to be written */
|
||||
pBuffer++;
|
||||
}
|
||||
|
||||
/* Deselect the FLASH: Chip Select high */
|
||||
SPI_FLASH_CS_HIGH();
|
||||
|
||||
/* Wait the end of Flash writing */
|
||||
SPI_FLASH_WaitForWriteEnd();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_BufferWrite
|
||||
* Description : Writes block of data to the FLASH. In this function, the
|
||||
* number of WRITE cycles are reduced, using Page WRITE sequence.
|
||||
* Input : - pBuffer : pointer to the buffer containing the data to be
|
||||
* written to the FLASH.
|
||||
* - WriteAddr : FLASH's internal address to write to.
|
||||
* - NumByteToWrite : number of bytes to write to the FLASH.
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void SPI_FLASH_BufferWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite)
|
||||
{
|
||||
uint8_t NumOfPage = 0, NumOfSingle = 0, Addr = 0, count = 0, temp = 0;
|
||||
|
||||
Addr = WriteAddr % SPI_FLASH_PageSize;
|
||||
count = SPI_FLASH_PageSize - Addr;
|
||||
NumOfPage = NumByteToWrite / SPI_FLASH_PageSize;
|
||||
NumOfSingle = NumByteToWrite % SPI_FLASH_PageSize;
|
||||
|
||||
if (Addr == 0) /* WriteAddr is SPI_FLASH_PageSize aligned */
|
||||
{
|
||||
if (NumOfPage == 0) /* NumByteToWrite < SPI_FLASH_PageSize */
|
||||
{
|
||||
SPI_FLASH_PageWrite(pBuffer, WriteAddr, NumByteToWrite);
|
||||
}
|
||||
else /* NumByteToWrite > SPI_FLASH_PageSize */
|
||||
{
|
||||
while (NumOfPage--)
|
||||
{
|
||||
SPI_FLASH_PageWrite(pBuffer, WriteAddr, SPI_FLASH_PageSize);
|
||||
WriteAddr += SPI_FLASH_PageSize;
|
||||
pBuffer += SPI_FLASH_PageSize;
|
||||
}
|
||||
|
||||
SPI_FLASH_PageWrite(pBuffer, WriteAddr, NumOfSingle);
|
||||
}
|
||||
}
|
||||
else /* WriteAddr is not SPI_FLASH_PageSize aligned */
|
||||
{
|
||||
if (NumOfPage == 0) /* NumByteToWrite < SPI_FLASH_PageSize */
|
||||
{
|
||||
if (NumOfSingle > count) /* (NumByteToWrite + WriteAddr) > SPI_FLASH_PageSize */
|
||||
{
|
||||
temp = NumOfSingle - count;
|
||||
|
||||
SPI_FLASH_PageWrite(pBuffer, WriteAddr, count);
|
||||
WriteAddr += count;
|
||||
pBuffer += count;
|
||||
|
||||
SPI_FLASH_PageWrite(pBuffer, WriteAddr, temp);
|
||||
}
|
||||
else
|
||||
{
|
||||
SPI_FLASH_PageWrite(pBuffer, WriteAddr, NumByteToWrite);
|
||||
}
|
||||
}
|
||||
else /* NumByteToWrite > SPI_FLASH_PageSize */
|
||||
{
|
||||
NumByteToWrite -= count;
|
||||
NumOfPage = NumByteToWrite / SPI_FLASH_PageSize;
|
||||
NumOfSingle = NumByteToWrite % SPI_FLASH_PageSize;
|
||||
|
||||
SPI_FLASH_PageWrite(pBuffer, WriteAddr, count);
|
||||
WriteAddr += count;
|
||||
pBuffer += count;
|
||||
|
||||
while (NumOfPage--)
|
||||
{
|
||||
SPI_FLASH_PageWrite(pBuffer, WriteAddr, SPI_FLASH_PageSize);
|
||||
WriteAddr += SPI_FLASH_PageSize;
|
||||
pBuffer += SPI_FLASH_PageSize;
|
||||
}
|
||||
|
||||
if (NumOfSingle != 0)
|
||||
{
|
||||
SPI_FLASH_PageWrite(pBuffer, WriteAddr, NumOfSingle);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_BufferRead
|
||||
* Description : Reads a block of data from the FLASH.
|
||||
* Input : - pBuffer : pointer to the buffer that receives the data read
|
||||
* from the FLASH.
|
||||
* - ReadAddr : FLASH's internal address to read from.
|
||||
* - NumByteToRead : number of bytes to read from the FLASH.
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void SPI_FLASH_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead)
|
||||
{
|
||||
/* Select the FLASH: Chip Select low */
|
||||
SPI_FLASH_CS_LOW();
|
||||
|
||||
/* Send "Read from Memory " instruction */
|
||||
SPI_FLASH_SendByte(READ);
|
||||
|
||||
/* Send ReadAddr high nibble address byte to read from */
|
||||
SPI_FLASH_SendByte((ReadAddr & 0xFF0000) >> 16);
|
||||
/* Send ReadAddr medium nibble address byte to read from */
|
||||
SPI_FLASH_SendByte((ReadAddr& 0xFF00) >> 8);
|
||||
/* Send ReadAddr low nibble address byte to read from */
|
||||
SPI_FLASH_SendByte(ReadAddr & 0xFF);
|
||||
|
||||
while (NumByteToRead--) /* while there is data to be read */
|
||||
{
|
||||
/* Read a byte from the FLASH */
|
||||
*pBuffer = SPI_FLASH_SendByte(Dummy_Byte);
|
||||
/* Point to the next location where the byte read will be saved */
|
||||
pBuffer++;
|
||||
}
|
||||
|
||||
/* Deselect the FLASH: Chip Select high */
|
||||
SPI_FLASH_CS_HIGH();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_ReadID
|
||||
* Description : Reads FLASH identification.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : FLASH identification
|
||||
*******************************************************************************/
|
||||
uint32_t SPI_FLASH_ReadID(void)
|
||||
{
|
||||
uint32_t Temp = 0, Temp0 = 0, Temp1 = 0, Temp2 = 0;
|
||||
|
||||
/* Select the FLASH: Chip Select low */
|
||||
SPI_FLASH_CS_LOW();
|
||||
|
||||
/* Send "RDID " instruction */
|
||||
SPI_FLASH_SendByte(0x9F);
|
||||
|
||||
/* Read a byte from the FLASH */
|
||||
Temp0 = SPI_FLASH_SendByte(Dummy_Byte);
|
||||
|
||||
/* Read a byte from the FLASH */
|
||||
Temp1 = SPI_FLASH_SendByte(Dummy_Byte);
|
||||
|
||||
/* Read a byte from the FLASH */
|
||||
Temp2 = SPI_FLASH_SendByte(Dummy_Byte);
|
||||
|
||||
/* Deselect the FLASH: Chip Select high */
|
||||
SPI_FLASH_CS_HIGH();
|
||||
|
||||
Temp = (Temp0 << 16) | (Temp1 << 8) | Temp2;
|
||||
|
||||
return Temp;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_StartReadSequence
|
||||
* Description : Initiates a read data byte (READ) sequence from the Flash.
|
||||
* This is done by driving the /CS line low to select the device,
|
||||
* then the READ instruction is transmitted followed by 3 bytes
|
||||
* address. This function exit and keep the /CS line low, so the
|
||||
* Flash still being selected. With this technique the whole
|
||||
* content of the Flash is read with a single READ instruction.
|
||||
* Input : - ReadAddr : FLASH's internal address to read from.
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void SPI_FLASH_StartReadSequence(uint32_t ReadAddr)
|
||||
{
|
||||
/* Select the FLASH: Chip Select low */
|
||||
SPI_FLASH_CS_LOW();
|
||||
|
||||
/* Send "Read from Memory " instruction */
|
||||
SPI_FLASH_SendByte(READ);
|
||||
|
||||
/* Send the 24-bit address of the address to read from -----------------------*/
|
||||
/* Send ReadAddr high nibble address byte */
|
||||
SPI_FLASH_SendByte((ReadAddr & 0xFF0000) >> 16);
|
||||
/* Send ReadAddr medium nibble address byte */
|
||||
SPI_FLASH_SendByte((ReadAddr& 0xFF00) >> 8);
|
||||
/* Send ReadAddr low nibble address byte */
|
||||
SPI_FLASH_SendByte(ReadAddr & 0xFF);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_ReadByte
|
||||
* Description : Reads a byte from the SPI Flash.
|
||||
* This function must be used only if the Start_Read_Sequence
|
||||
* function has been previously called.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : Byte Read from the SPI Flash.
|
||||
*******************************************************************************/
|
||||
uint8_t SPI_FLASH_ReadByte(void)
|
||||
{
|
||||
return (SPI_FLASH_SendByte(Dummy_Byte));
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_SendByte
|
||||
* Description : Sends a byte through the SPI interface and return the byte
|
||||
* received from the SPI bus.
|
||||
* Input : byte : byte to send.
|
||||
* Output : None
|
||||
* Return : The value of the received byte.
|
||||
*******************************************************************************/
|
||||
uint8_t SPI_FLASH_SendByte(uint8_t byte)
|
||||
{
|
||||
/* Loop while DR register in not emplty */
|
||||
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_TXE) == RESET);
|
||||
|
||||
/* Send byte through the SPI1 peripheral */
|
||||
SPI_I2S_SendData(SPI1, byte);
|
||||
|
||||
/* Wait to receive a byte */
|
||||
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_RXNE) == RESET);
|
||||
|
||||
/* Return the byte read from the SPI bus */
|
||||
return SPI_I2S_ReceiveData(SPI1);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_SendHalfWord
|
||||
* Description : Sends a Half Word through the SPI interface and return the
|
||||
* Half Word received from the SPI bus.
|
||||
* Input : Half Word : Half Word to send.
|
||||
* Output : None
|
||||
* Return : The value of the received Half Word.
|
||||
*******************************************************************************/
|
||||
uint16_t SPI_FLASH_SendHalfWord(uint16_t HalfWord)
|
||||
{
|
||||
/* Loop while DR register in not emplty */
|
||||
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_TXE) == RESET);
|
||||
|
||||
/* Send Half Word through the SPI1 peripheral */
|
||||
SPI_I2S_SendData(SPI1, HalfWord);
|
||||
|
||||
/* Wait to receive a Half Word */
|
||||
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_RXNE) == RESET);
|
||||
|
||||
/* Return the Half Word read from the SPI bus */
|
||||
return SPI_I2S_ReceiveData(SPI1);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_WriteEnable
|
||||
* Description : Enables the write access to the FLASH.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void SPI_FLASH_WriteEnable(void)
|
||||
{
|
||||
/* Select the FLASH: Chip Select low */
|
||||
SPI_FLASH_CS_LOW();
|
||||
|
||||
/* Send "Write Enable" instruction */
|
||||
SPI_FLASH_SendByte(WREN);
|
||||
|
||||
/* Deselect the FLASH: Chip Select high */
|
||||
SPI_FLASH_CS_HIGH();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SPI_FLASH_WaitForWriteEnd
|
||||
* Description : Polls the status of the Write In Progress (WIP) flag in the
|
||||
* FLASH's status register and loop until write opertaion
|
||||
* has completed.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void SPI_FLASH_WaitForWriteEnd(void)
|
||||
{
|
||||
uint8_t FLASH_Status = 0;
|
||||
|
||||
/* Select the FLASH: Chip Select low */
|
||||
SPI_FLASH_CS_LOW();
|
||||
|
||||
/* Send "Read Status Register" instruction */
|
||||
SPI_FLASH_SendByte(RDSR);
|
||||
|
||||
/* Loop as long as the memory is busy with a write cycle */
|
||||
do
|
||||
{
|
||||
/* Send a dummy byte to generate the clock needed by the FLASH
|
||||
and put the value of the status register in FLASH_Status variable */
|
||||
FLASH_Status = SPI_FLASH_SendByte(Dummy_Byte);
|
||||
|
||||
}
|
||||
while ((FLASH_Status & WIP_Flag) == SET); /* Write in progress */
|
||||
|
||||
/* Deselect the FLASH: Chip Select high */
|
||||
SPI_FLASH_CS_HIGH();
|
||||
}
|
||||
|
||||
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
|
||||
@ -0,0 +1,289 @@
|
||||
/*
|
||||
FreeRTOS V6.0.5 - Copyright (C) 2010 Real Time Engineers Ltd.
|
||||
|
||||
***************************************************************************
|
||||
* *
|
||||
* If you are: *
|
||||
* *
|
||||
* + New to FreeRTOS, *
|
||||
* + Wanting to learn FreeRTOS or multitasking in general quickly *
|
||||
* + Looking for basic training, *
|
||||
* + Wanting to improve your FreeRTOS skills and productivity *
|
||||
* *
|
||||
* then take a look at the FreeRTOS eBook *
|
||||
* *
|
||||
* "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
|
||||
* http://www.FreeRTOS.org/Documentation *
|
||||
* *
|
||||
* A pdf reference manual is also available. Both are usually delivered *
|
||||
* to your inbox within 20 minutes to two hours when purchased between 8am *
|
||||
* and 8pm GMT (although please allow up to 24 hours in case of *
|
||||
* exceptional circumstances). Thank you for your support! *
|
||||
* *
|
||||
***************************************************************************
|
||||
|
||||
This file is part of the FreeRTOS distribution.
|
||||
|
||||
FreeRTOS is free software; you can redistribute it and/or modify it under
|
||||
the terms of the GNU General Public License (version 2) as published by the
|
||||
Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
|
||||
***NOTE*** The exception to the GPL is included to allow you to distribute
|
||||
a combined work that includes FreeRTOS without being obliged to provide the
|
||||
source code for proprietary components outside of the FreeRTOS kernel.
|
||||
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
|
||||
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
more details. You should have received a copy of the GNU General Public
|
||||
License and the FreeRTOS license exception along with FreeRTOS; if not it
|
||||
can be viewed here: http://www.freertos.org/a00114.html and also obtained
|
||||
by writing to Richard Barry, contact details for whom are available on the
|
||||
FreeRTOS WEB site.
|
||||
|
||||
1 tab == 4 spaces!
|
||||
|
||||
http://www.FreeRTOS.org - Documentation, latest information, license and
|
||||
contact details.
|
||||
|
||||
http://www.SafeRTOS.com - A version that is certified for use in safety
|
||||
critical systems.
|
||||
|
||||
http://www.OpenRTOS.com - Commercial support, development, porting,
|
||||
licensing and training services.
|
||||
*/
|
||||
|
||||
/*
|
||||
INTERRUPT DRIVEN SERIAL PORT DRIVER.
|
||||
*/
|
||||
|
||||
|
||||
/******************************************************************************
|
||||
*** NOTE: COM0 == USART1, COM1 == USART2
|
||||
******************************************************************************/
|
||||
|
||||
|
||||
/* Scheduler includes. */
|
||||
#include "FreeRTOS.h"
|
||||
#include "queue.h"
|
||||
#include "semphr.h"
|
||||
|
||||
/* Driver includes. */
|
||||
#include "CircularBuffer.h"
|
||||
|
||||
/* Library includes. */
|
||||
#include "stm32f10x_lib.h"
|
||||
#include "stm32f10x_rcc.h"
|
||||
|
||||
/* Driver includes. */
|
||||
#include "STM32_USART.h"
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* The number of COM ports that can be controlled at the same time. */
|
||||
#define serNUM_COM_PORTS ( 2 )
|
||||
|
||||
/* Indexes into the xCOMBufferDefinitions array for the Rx and Tx buffers. */
|
||||
#define serRX_BUFFER_INDEX ( 0 )
|
||||
#define serTX_BUFFER_INDEX ( 1 )
|
||||
|
||||
/* A counting semaphore is used to allows tasks to block to wait for characters
|
||||
to be received. This constant defines the max count. Making this value higher
|
||||
does not change the amount of RAM used by the semaphore, so its worth making it
|
||||
quite high. */
|
||||
#define serSEMAPHORE_MAX_COUNT ( 100 )
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* An Rx and a Tx buffer structure for each COM port. */
|
||||
static xCircularBuffer xCOMBufferDefinitions[ serNUM_COM_PORTS ][ 2 ];
|
||||
|
||||
/* The buffers themselves. */
|
||||
static unsigned char ucCOM0_Rx_Buffer[ configCOM0_RX_BUFFER_LENGTH ];
|
||||
static unsigned char ucCOM0_Tx_Buffer[ configCOM0_TX_BUFFER_LENGTH ];
|
||||
static unsigned char ucCOM1_Rx_Buffer[ configCOM1_RX_BUFFER_LENGTH ];
|
||||
static unsigned char ucCOM1_Tx_Buffer[ configCOM1_TX_BUFFER_LENGTH ];
|
||||
|
||||
/* Semaphores used to block tasks that are waiting for characters to be
|
||||
received. */
|
||||
static xSemaphoreHandle xCOM0RxSemaphore, xCOM1RxSemaphore;
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* UART interrupt handler. */
|
||||
void vUARTInterruptHandler( void );
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/*
|
||||
* See serial.h in this project for parameter descriptions.
|
||||
*/
|
||||
long lCOMPortInit( unsigned long ulPort, unsigned long ulWantedBaud )
|
||||
{
|
||||
long lReturn = pdFAIL;
|
||||
USART_InitTypeDef USART_InitStructure;
|
||||
NVIC_InitTypeDef NVIC_InitStructure;
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
|
||||
if( ulPort < serNUM_COM_PORTS )
|
||||
{
|
||||
/* The common (not port dependent) part of the initialisation. */
|
||||
USART_InitStructure.USART_BaudRate = ulWantedBaud;
|
||||
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
||||
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
||||
USART_InitStructure.USART_Parity = USART_Parity_No;
|
||||
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
||||
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = configLIBRARY_KERNEL_INTERRUPT_PRIORITY;
|
||||
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
|
||||
|
||||
/* Init the buffer structures with the buffer for the COM port being
|
||||
initialised, and perform any non-common initialisation necessary. This
|
||||
does not check to see if the COM port has already been initialised. */
|
||||
if( ulPort == 0 )
|
||||
{
|
||||
/* Create the semaphore used to enable tasks to block to wait for
|
||||
characters to be received. */
|
||||
xCOM0RxSemaphore = xSemaphoreCreateCounting( serSEMAPHORE_MAX_COUNT, 0 );
|
||||
|
||||
vInitialiseCircularBuffer( &( xCOMBufferDefinitions[ ulPort ][ serRX_BUFFER_INDEX ] ),
|
||||
ucCOM0_Rx_Buffer,
|
||||
configCOM0_RX_BUFFER_LENGTH,
|
||||
sizeof( unsigned char ),
|
||||
NULL
|
||||
);
|
||||
|
||||
vInitialiseCircularBuffer( &( xCOMBufferDefinitions[ ulPort ][ serTX_BUFFER_INDEX ] ),
|
||||
ucCOM0_Tx_Buffer,
|
||||
configCOM0_TX_BUFFER_LENGTH,
|
||||
sizeof( unsigned char ),
|
||||
NULL
|
||||
);
|
||||
|
||||
/* Enable COM1 clock - the ST libraries start numbering from UART1,
|
||||
making this UART 2. */
|
||||
RCC_APB2PeriphClockCmd( RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE );
|
||||
|
||||
/* Configure USART1 Rx (PA10) as input floating */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
||||
GPIO_Init( GPIOA, &GPIO_InitStructure );
|
||||
|
||||
/* Configure USART1 Tx (PA9) as alternate function push-pull */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
||||
GPIO_Init( GPIOA, &GPIO_InitStructure );
|
||||
|
||||
USART_Init( USART1, &USART_InitStructure );
|
||||
USART_ITConfig( USART1, USART_IT_RXNE, ENABLE );
|
||||
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQChannel;
|
||||
NVIC_Init( &NVIC_InitStructure );
|
||||
|
||||
USART_DMACmd( USART1, ( USART_DMAReq_Tx | USART_DMAReq_Rx ), ENABLE );
|
||||
USART_Cmd( USART1, ENABLE );
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Create the semaphore used to enable tasks to block to wait for
|
||||
characters to be received. */
|
||||
xCOM1RxSemaphore = xSemaphoreCreateCounting( serSEMAPHORE_MAX_COUNT, 0 );
|
||||
|
||||
vInitialiseCircularBuffer( &( xCOMBufferDefinitions[ ulPort ][ serRX_BUFFER_INDEX ] ),
|
||||
ucCOM1_Rx_Buffer,
|
||||
configCOM1_RX_BUFFER_LENGTH,
|
||||
sizeof( unsigned char ),
|
||||
NULL
|
||||
);
|
||||
|
||||
vInitialiseCircularBuffer( &( xCOMBufferDefinitions[ ulPort ][ serTX_BUFFER_INDEX ] ),
|
||||
ucCOM1_Tx_Buffer,
|
||||
configCOM1_TX_BUFFER_LENGTH,
|
||||
sizeof( unsigned char ),
|
||||
NULL
|
||||
);
|
||||
|
||||
/* Enable COM0 clock - the ST libraries start numbering from 1. */
|
||||
RCC_APB2PeriphClockCmd( RCC_APB1Periph_USART2 | RCC_APB2Periph_GPIOA, ENABLE );
|
||||
|
||||
/* Configure USART2 Rx (PA3) as input floating */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
||||
GPIO_Init( GPIOA, &GPIO_InitStructure );
|
||||
|
||||
/* Configure USART2 Tx (PA2) as alternate function push-pull */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
||||
GPIO_Init( GPIOA, &GPIO_InitStructure );
|
||||
|
||||
USART_Init( USART2, &USART_InitStructure );
|
||||
USART_ITConfig( USART2, USART_IT_RXNE, ENABLE );
|
||||
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQChannel;
|
||||
NVIC_Init( &NVIC_InitStructure );
|
||||
|
||||
USART_DMACmd( USART2, ( USART_DMAReq_Tx | USART_DMAReq_Rx ), ENABLE );
|
||||
USART_Cmd( USART2, ENABLE );
|
||||
}
|
||||
|
||||
/* Everything is ok. */
|
||||
lReturn = pdPASS;
|
||||
}
|
||||
|
||||
return lReturn;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
signed long xUSARTGetChar( long lPort, signed char *pcRxedChar, portTickType xBlockTime )
|
||||
{
|
||||
return pdFALSE;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
void vSerialPutString( long lPort, const signed char * const pcString, unsigned portSHORT usStringLength )
|
||||
{
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
signed long xSerialPutChar( long lPort, signed char cOutChar, portTickType xBlockTime )
|
||||
{
|
||||
return pdFALSE;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
void vUARTInterruptHandler( void )
|
||||
{
|
||||
long xHigherPriorityTaskWoken = pdFALSE;
|
||||
char cChar;
|
||||
|
||||
if( USART_GetITStatus( USART1, USART_IT_TXE ) == SET )
|
||||
{
|
||||
/* The interrupt was caused by the THR becoming empty. Are there any
|
||||
more characters to transmit? */
|
||||
if( 0 )// if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE )
|
||||
{
|
||||
/* A character was retrieved from the queue so can be sent to the
|
||||
THR now. */
|
||||
USART_SendData( USART1, cChar );
|
||||
}
|
||||
else
|
||||
{
|
||||
USART_ITConfig( USART1, USART_IT_TXE, DISABLE );
|
||||
}
|
||||
}
|
||||
|
||||
if( USART_GetITStatus( USART1, USART_IT_RXNE ) == SET )
|
||||
{
|
||||
cChar = USART_ReceiveData( USART1 );
|
||||
// xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
|
||||
}
|
||||
|
||||
portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
@ -0,0 +1,60 @@
|
||||
/*
|
||||
FreeRTOS V6.0.5 - Copyright (C) 2010 Real Time Engineers Ltd.
|
||||
|
||||
***************************************************************************
|
||||
* *
|
||||
* If you are: *
|
||||
* *
|
||||
* + New to FreeRTOS, *
|
||||
* + Wanting to learn FreeRTOS or multitasking in general quickly *
|
||||
* + Looking for basic training, *
|
||||
* + Wanting to improve your FreeRTOS skills and productivity *
|
||||
* *
|
||||
* then take a look at the FreeRTOS eBook *
|
||||
* *
|
||||
* "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
|
||||
* http://www.FreeRTOS.org/Documentation *
|
||||
* *
|
||||
* A pdf reference manual is also available. Both are usually delivered *
|
||||
* to your inbox within 20 minutes to two hours when purchased between 8am *
|
||||
* and 8pm GMT (although please allow up to 24 hours in case of *
|
||||
* exceptional circumstances). Thank you for your support! *
|
||||
* *
|
||||
***************************************************************************
|
||||
|
||||
This file is part of the FreeRTOS distribution.
|
||||
|
||||
FreeRTOS is free software; you can redistribute it and/or modify it under
|
||||
the terms of the GNU General Public License (version 2) as published by the
|
||||
Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
|
||||
***NOTE*** The exception to the GPL is included to allow you to distribute
|
||||
a combined work that includes FreeRTOS without being obliged to provide the
|
||||
source code for proprietary components outside of the FreeRTOS kernel.
|
||||
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
|
||||
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
more details. You should have received a copy of the GNU General Public
|
||||
License and the FreeRTOS license exception along with FreeRTOS; if not it
|
||||
can be viewed here: http://www.freertos.org/a00114.html and also obtained
|
||||
by writing to Richard Barry, contact details for whom are available on the
|
||||
FreeRTOS WEB site.
|
||||
|
||||
1 tab == 4 spaces!
|
||||
|
||||
http://www.FreeRTOS.org - Documentation, latest information, license and
|
||||
contact details.
|
||||
|
||||
http://www.SafeRTOS.com - A version that is certified for use in safety
|
||||
critical systems.
|
||||
|
||||
http://www.OpenRTOS.com - Commercial support, development, porting,
|
||||
licensing and training services.
|
||||
*/
|
||||
|
||||
#ifndef STM_32_SERIAL_COMMS_H
|
||||
#define STM_32_SERIAL_COMMS_H
|
||||
|
||||
long lCOMPortInit( unsigned long ulPort, unsigned long ulWantedBaud );
|
||||
|
||||
#endif
|
||||
|
||||
@ -0,0 +1 @@
|
||||
Only include one of the two ParTest source files in your build at any one time.
|
||||
@ -1,247 +0,0 @@
|
||||
/*
|
||||
FreeRTOS V6.0.5 - Copyright (C) 2010 Real Time Engineers Ltd.
|
||||
|
||||
***************************************************************************
|
||||
* *
|
||||
* If you are: *
|
||||
* *
|
||||
* + New to FreeRTOS, *
|
||||
* + Wanting to learn FreeRTOS or multitasking in general quickly *
|
||||
* + Looking for basic training, *
|
||||
* + Wanting to improve your FreeRTOS skills and productivity *
|
||||
* *
|
||||
* then take a look at the FreeRTOS eBook *
|
||||
* *
|
||||
* "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
|
||||
* http://www.FreeRTOS.org/Documentation *
|
||||
* *
|
||||
* A pdf reference manual is also available. Both are usually delivered *
|
||||
* to your inbox within 20 minutes to two hours when purchased between 8am *
|
||||
* and 8pm GMT (although please allow up to 24 hours in case of *
|
||||
* exceptional circumstances). Thank you for your support! *
|
||||
* *
|
||||
***************************************************************************
|
||||
|
||||
This file is part of the FreeRTOS distribution.
|
||||
|
||||
FreeRTOS is free software; you can redistribute it and/or modify it under
|
||||
the terms of the GNU General Public License (version 2) as published by the
|
||||
Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
|
||||
***NOTE*** The exception to the GPL is included to allow you to distribute
|
||||
a combined work that includes FreeRTOS without being obliged to provide the
|
||||
source code for proprietary components outside of the FreeRTOS kernel.
|
||||
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
|
||||
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
more details. You should have received a copy of the GNU General Public
|
||||
License and the FreeRTOS license exception along with FreeRTOS; if not it
|
||||
can be viewed here: http://www.freertos.org/a00114.html and also obtained
|
||||
by writing to Richard Barry, contact details for whom are available on the
|
||||
FreeRTOS WEB site.
|
||||
|
||||
1 tab == 4 spaces!
|
||||
|
||||
http://www.FreeRTOS.org - Documentation, latest information, license and
|
||||
contact details.
|
||||
|
||||
http://www.SafeRTOS.com - A version that is certified for use in safety
|
||||
critical systems.
|
||||
|
||||
http://www.OpenRTOS.com - Commercial support, development, porting,
|
||||
licensing and training services.
|
||||
*/
|
||||
|
||||
/*
|
||||
BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0.
|
||||
*/
|
||||
|
||||
/* Scheduler includes. */
|
||||
#include "FreeRTOS.h"
|
||||
#include "queue.h"
|
||||
#include "semphr.h"
|
||||
|
||||
/* Library includes. */
|
||||
#include "stm32f10x_lib.h"
|
||||
|
||||
/* Demo application includes. */
|
||||
#include "serial.h"
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* Misc defines. */
|
||||
#define serINVALID_QUEUE ( ( xQueueHandle ) 0 )
|
||||
#define serNO_BLOCK ( ( portTickType ) 0 )
|
||||
#define serTX_BLOCK_TIME ( 40 / portTICK_RATE_MS )
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* The queue used to hold received characters. */
|
||||
static xQueueHandle xRxedChars;
|
||||
static xQueueHandle xCharsForTx;
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* UART interrupt handler. */
|
||||
void vUARTInterruptHandler( void );
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/*
|
||||
* See the serial2.h header file.
|
||||
*/
|
||||
xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
|
||||
{
|
||||
xComPortHandle xReturn;
|
||||
USART_InitTypeDef USART_InitStructure;
|
||||
NVIC_InitTypeDef NVIC_InitStructure;
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
|
||||
/* Create the queues used to hold Rx/Tx characters. */
|
||||
xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
|
||||
xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
|
||||
|
||||
/* If the queue/semaphore was created correctly then setup the serial port
|
||||
hardware. */
|
||||
if( ( xRxedChars != serINVALID_QUEUE ) && ( xCharsForTx != serINVALID_QUEUE ) )
|
||||
{
|
||||
/* Enable USART1 clock */
|
||||
RCC_APB2PeriphClockCmd( RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE );
|
||||
|
||||
/* Configure USART1 Rx (PA10) as input floating */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
||||
GPIO_Init( GPIOA, &GPIO_InitStructure );
|
||||
|
||||
/* Configure USART1 Tx (PA9) as alternate function push-pull */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
||||
GPIO_Init( GPIOA, &GPIO_InitStructure );
|
||||
|
||||
USART_InitStructure.USART_BaudRate = ulWantedBaud;
|
||||
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
||||
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
||||
USART_InitStructure.USART_Parity = USART_Parity_No;
|
||||
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
||||
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
||||
|
||||
USART_Init( USART1, &USART_InitStructure );
|
||||
|
||||
USART_ITConfig( USART1, USART_IT_RXNE, ENABLE );
|
||||
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQChannel;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = configLIBRARY_KERNEL_INTERRUPT_PRIORITY;
|
||||
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init( &NVIC_InitStructure );
|
||||
|
||||
USART_Cmd( USART1, ENABLE );
|
||||
}
|
||||
else
|
||||
{
|
||||
xReturn = ( xComPortHandle ) 0;
|
||||
}
|
||||
|
||||
/* This demo file only supports a single port but we have to return
|
||||
something to comply with the standard demo header file. */
|
||||
return xReturn;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
|
||||
{
|
||||
/* The port handle is not required as this driver only supports one port. */
|
||||
( void ) pxPort;
|
||||
|
||||
/* Get the next character from the buffer. Return false if no characters
|
||||
are available, or arrive before xBlockTime expires. */
|
||||
if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
|
||||
{
|
||||
return pdTRUE;
|
||||
}
|
||||
else
|
||||
{
|
||||
return pdFALSE;
|
||||
}
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
void vSerialPutString( xComPortHandle pxPort, const signed portCHAR * const pcString, unsigned portSHORT usStringLength )
|
||||
{
|
||||
signed portCHAR *pxNext;
|
||||
|
||||
/* A couple of parameters that this port does not use. */
|
||||
( void ) usStringLength;
|
||||
( void ) pxPort;
|
||||
|
||||
/* NOTE: This implementation does not handle the queue being full as no
|
||||
block time is used! */
|
||||
|
||||
/* The port handle is not required as this driver only supports UART1. */
|
||||
( void ) pxPort;
|
||||
|
||||
/* Send each character in the string, one at a time. */
|
||||
pxNext = ( signed portCHAR * ) pcString;
|
||||
while( *pxNext )
|
||||
{
|
||||
xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
|
||||
pxNext++;
|
||||
}
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
|
||||
{
|
||||
signed portBASE_TYPE xReturn;
|
||||
|
||||
/* Just to remove the compiler warning. */
|
||||
( void ) pxPort;
|
||||
|
||||
if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) == pdPASS )
|
||||
{
|
||||
xReturn = pdPASS;
|
||||
USART_ITConfig( USART1, USART_IT_TXE, ENABLE );
|
||||
}
|
||||
else
|
||||
{
|
||||
xReturn = pdFAIL;
|
||||
}
|
||||
|
||||
return xReturn;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
void vUARTInterruptHandler( void )
|
||||
{
|
||||
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
|
||||
portCHAR cChar;
|
||||
|
||||
if( USART_GetITStatus( USART1, USART_IT_TXE ) == SET )
|
||||
{
|
||||
/* The interrupt was caused by the THR becoming empty. Are there any
|
||||
more characters to transmit? */
|
||||
if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE )
|
||||
{
|
||||
/* A character was retrieved from the queue so can be sent to the
|
||||
THR now. */
|
||||
USART_SendData( USART1, cChar );
|
||||
}
|
||||
else
|
||||
{
|
||||
USART_ITConfig( USART1, USART_IT_TXE, DISABLE );
|
||||
}
|
||||
}
|
||||
|
||||
if( USART_GetITStatus( USART1, USART_IT_RXNE ) == SET )
|
||||
{
|
||||
cChar = USART_ReceiveData( USART1 );
|
||||
xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
|
||||
}
|
||||
|
||||
portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue