Demo/ARM7_STR75x_IAR/ParTest/ParTest.c

@@ -41,30 +41,9 @@
 #include "partest.h"
 
 /*-----------------------------------------------------------
- * Simple parallel port IO routines for the LED's - which are
- * connected to the second nibble of GPIO port 1.
+ * Simple parallel port IO routines for the LED's 
  *-----------------------------------------------------------*/
 
-#define partstLED_3		0x0080
-#define partstLED_2		0x0040
-#define partstLED_1		0x0020
-#define partstLED_0		0x0010
-#define partstON_BOARD	0x0100	/* The LED built onto the KickStart board. */
-
-#define partstALL_LEDs	( partstLED_0 | partstLED_1 | partstLED_2 | partstLED_3 | partstON_BOARD )
-
-#define partstFIRST_LED_BIT 4
-
-/* This demo application uses files that are common to all port demo
-applications.  These files assume 6 LED's are available, whereas I have
-only 5 (including the LED built onto the development board).  To prevent
-two tasks trying to use the same LED a bit of remapping is performed.
-The ComTest tasks will try and use LED's 6 and 7.  LED 6 is ignored and
-has no effect, LED 7 is mapped to LED3.   The LED usage is described in
-the port documentation available from the FreeRTOS.org WEB site. */
-#define partstCOM_TEST_LED	7
-#define partstRX_CHAR_LED	3
-
 #define partstNUM_LEDS	4
 
 typedef struct GPIOMAP
@@ -80,22 +59,25 @@ static GPIO_MAP xLEDMap[ partstNUM_LEDS ] =
 	{ ( GPIO_TypeDef	* )GPIO0_BASE, GPIO_Pin_16, 0UL },
 	{ ( GPIO_TypeDef	* )GPIO2_BASE, GPIO_Pin_18, 0UL },	
 	{ ( GPIO_TypeDef	* )GPIO2_BASE, GPIO_Pin_19, 0UL }	
-	
 };
 
 /*-----------------------------------------------------------*/
-GPIO_InitTypeDef    GPIO_InitStructure ;
 
 void vParTestInitialise( void )
 {	
+GPIO_InitTypeDef GPIO_InitStructure ;
+
     /* Configure the bits used to flash LED's on port 1 as output. */
+
 	/* Configure LED3 */
 	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
 	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_16;
 	GPIO_Init(GPIO0,&GPIO_InitStructure);
+
 	/* Configure LED2 */
 	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
 	GPIO_Init(GPIO1, &GPIO_InitStructure);
+
 	/* Configure LED4 and LED5 */
 	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_18 | GPIO_Pin_19;
 	GPIO_Init(GPIO2, &GPIO_InitStructure);
@@ -110,6 +92,8 @@ void vParTestInitialise( void )
 void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
 {
 	if( uxLED < partstNUM_LEDS )
+	{
+		portENTER_CRITICAL();
 		{
 			if( xValue )
 			{
@@ -122,12 +106,16 @@ void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
 				xLEDMap[ uxLED ].ulValue = 1;			
 			}
 		}
+		portEXIT_CRITICAL();
+	}
 }
 /*-----------------------------------------------------------*/
 
 void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
 {
 	if( uxLED < partstNUM_LEDS )
+	{
+		portENTER_CRITICAL();
 		{
 			if( xLEDMap[ uxLED ].ulValue == 1 )
 			{
@@ -140,6 +128,8 @@ void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
 				xLEDMap[ uxLED ].ulValue = 1;			
 			}
 		}
+		portEXIT_CRITICAL();
+	}
 }