1. Remove the srs_global_dispose, which causes the crash when still
publishing when quit.
2. Always call _srs_thread_pool->initialize for single thread.
3. Support `--signal-api` to send signal by HTTP API, because CLion
eliminate the signals.
---
Co-authored-by: Jacob Su <suzp1984@gmail.com>
By setting the env `ASAN_OPTIONS=halt_on_error=0`, we can ignore memory
leaks, see
https://github.com/google/sanitizers/wiki/AddressSanitizerFlags
By setting env `ASAN_OPTIONS=detect_leaks=0`, we can disable memory
leaking detection in parent process when forking for daemon.
Improvements for ST(State Threads):
1. ST: Use g++ for CXX compiler.
2. ST: Remove macros for clist.
3. ST: Remove macros for global thread and vp.
4. ST: Remove macros for vp queue operations.
5. ST: Remove macros for context switch.
6. ST: Remove macros for setjmp/longjmp.
7. ST: Remove macro for stack pad.
8. ST: Refine macro for valgrind.
---------
Co-authored-by: Jacob Su <suzp1984@gmail.com>
New features for valgrind:
1. ST: Support /api/v1/valgrind for leaking check.
2. ST: Support /api/v1/valgrind?check=full|added|changed|new|quick
To use Valgrind to detect memory leaks in SRS, even though Valgrind
hooks are supported in ST, there are still many false positives. A more
reasonable approach is to have Valgrind report incremental memory leaks.
This way, global and static variables can be avoided, and detection can
be achieved without exiting the program. Follow these steps:
1. Compile SRS with Valgrind support: `./configure --valgrind=on &&
make`
2. Start SRS with memory leak detection enabled: `valgrind
--leak-check=full ./objs/srs -c conf/console.conf`
3. Trigger memory detection by using curl to access the API and generate
calibration data. There will still be many false positives, but these
can be ignored: `curl http://127.0.0.1:1985/api/v1/valgrind?check=added`
4. Perform load testing or test the suspected leaking functionality,
such as RTMP streaming: `ffmpeg -re -i doc/source.flv -c copy -f flv
rtmp://127.0.0.1/live/livestream`
5. Stop streaming and wait for SRS to clean up the Source memory,
approximately 30 seconds.
6. Perform incremental memory leak detection. The reported leaks will be
very accurate at this point: `curl
http://127.0.0.1:1985/api/v1/valgrind?check=added`
> Note: To avoid interference from the HTTP request itself on Valgrind,
SRS uses a separate coroutine to perform periodic checks. Therefore,
after accessing the API, you may need to wait a few seconds for the
detection to be triggered.
---------
Co-authored-by: Jacob Su <suzp1984@gmail.com>
I did some preliminary code inspection. The two playback endpoints share
the same `SrsLiveStream` instance. After the first one disconnects,
`alive_` is set to false.
```
alive_ = true;
err = do_serve_http(w, r);
alive_ = false;
```
In the `SrsHttpStreamServer::http_unmount(SrsRequest* r)` function,
`stream->alive()` is already false, so `mux.unhandle` will free the
`SrsLiveStream`. This causes the other connection coroutine to return to
its execution environment after the `SrsLiveStream` instance has already
been freed.
```
// Wait for cache and stream to stop.
int i = 0;
for (; i < 1024; i++) {
if (!cache->alive() && !stream->alive()) {
break;
}
srs_usleep(100 * SRS_UTIME_MILLISECONDS);
}
// Unmount the HTTP handler, which will free the entry. Note that we must free it after cache and
// stream stopped for it uses it.
mux.unhandle(entry->mount, stream.get());
```
`alive_` was changed from a `bool` to an `int` to ensure that
`mux.unhandle` is only executed after each connection's `serve_http` has
exited.
---------
Co-authored-by: liumengte <liumengte@visionular.com>
Co-authored-by: winlin <winlinvip@gmail.com>
1. don't use static variable to store the result;
2. add more UT to handle the multi value and values with whitespaces;
related to #409216e569d823/trunk/src/app/srs_app_config.cpp (L71-L82)
`static SrsConfDirective* dir` removed, this static var here is to avoid
the memory leak, I add the `SrsConfDirective` instance to the `env_dirs`
directive container, which will destroy itself inside `SrsConfig`
destructor.
---------
Co-authored-by: winlin <winlinvip@gmail.com>
When unpublishing, the handler callback that will stop the coroutine:
```cpp
_can_publish = true;
handler->on_unpublish(req);
```
In this handler, the `http_unmount` will be called:
```cpp
void SrsHttpStreamServer::http_unmount(SrsRequest* r)
cache->stop();
```
In this `http_unmount` function, there could be context switching. In
such a situation, a new connection might publish the stream while the
unpublish process is freeing the stream, leading to a crash.
To prevent a new publisher, we should change the state only after all
handlers and hooks are completed.
---------
Co-authored-by: liumengte <liumengte@visionular.com>
Co-authored-by: winlin <winlinvip@gmail.com>
1. add on_connect & on_close directives to conf/full.conf;
2. let http_hooks env overwrite support multi values; e.g.
SRS_VHOST_HTTP_HOOKS_ON_CONNECT="http://127.0.0.1/api/connecthttp://localhost/api/connect"
related to
https://github.com/ossrs/srs/issues/1222#issuecomment-2170424703
Above comments said `http_hook` env may not works as expected, as I
found there are still has some issue in `http_hooks` env configuration,
but this PR may not target above problem.
---------
Co-authored-by: winlin <winlinvip@gmail.com>
Sorry this is another pull request with same intention. But there is
more variants of h264 und h265 codecs and I think it is good to support
them all.
---------
Co-authored-by: winlin <winlinvip@gmail.com>
Currently only libx264 ffmpeg encoder is supported. This pull request
add also h264_qsv. But maybe a more generic solution with oder encoders
would be useful to.
---------
Co-authored-by: winlin <winlinvip@gmail.com>
For #3369 to support an external powerful SIP server, do not use the
embedded SIP server of SRS.
For more information, detailed steps, system architecture, and
background explanation, please see
https://ossrs.net/lts/zh-cn/docs/v6/doc/gb28181#external-sip
---------
Co-authored-by: Jacob Su <suzp1984@gmail.com>
Co-authored-by: winlin <winlinvip@gmail.com>
The session HLS manifest file lacks a terminating newline in the final
line.
This may cause strict players to reject it.
---------
Co-authored-by: winlin <winlinvip@gmail.com>
## Describe ##
http_remux feature support config `has_audio`, `has_video` &
`guess_has_av` prop.
282d94d7bb/trunk/src/app/srs_app_http_stream.cpp (L630-L632)
Take `http_flv` as example, `srs` can accept both RTMP streams with only
audio, only video or both audio and video streams. It is controlled by
above three properties.
But `guess_has_av` is not implemented by `http_ts`. The problem is that
if I want publish a RTMP stream with audio or video track, the
`has_audio` and `has_video`, which are default true/on, must to be
config to match the RTMP stream, otherwise the `mpegts.js` player can't
play the `http-ts` stream.
## How to reproduce ##
1. `export SRS_VHOST_HTTP_REMUX_HAS_AUDIO=on; export
SRS_VHOST_HTTP_REMUX_HAS_VIDEO=on; export
SRS_VHOST_HTTP_REMUX_GUESS_HAS_AV=on; ./objs/srs -c
conf/http.ts.live.conf`
2. publish rtmp stream without video: `ffmpeg -re -stream_loop -1 -i
srs/trunk/doc/source.200kbps.768x320.flv -vn -acodec copy -f flv
rtmp://localhost/live/livestream`
3. open chrome browser, open
`http://localhost:8080/players/srs_player.html?schema=http`, go to
`LivePlayer`, input URL: `http://localhost:8080/live/livestream.ts`,
click play.
4. the `http://localhost:8080/live/livestream.ts` can not play.
## Solution ##
Let `http-ts` support `guess_has_av`, `http-flv` already supported. The
`guess_has_av` default value is ture/on, so the `http-ts|flv` can play
any streams with audio, video or both.
---------
Co-authored-by: Winlin <winlinvip@gmail.com>
This not only silences a deprecation warning by docker build, but also
makes it consistent as the other ENV statement already uses the new
syntax.
---------
Co-authored-by: winlin <winlinvip@gmail.com>
1. Should always stop coroutine before close fd, see #511, #1784
2. When edge forwarder coroutine quit, always set the error code.
3. Do not unpublish if invalid state.
---------
Co-authored-by: Jacob Su <suzp1984@gmail.com>
## Cause
dash auto dispose is configured by seconds, but the code compare by
usecond, 1 second = 1,000,000 useconds.
releated to #4097
Bug introduced after #4097 supported Dash auto dispose after a timeout
without media data.
## How to reproduce
1. `./objs/srs -c conf/dash.conf`
2. publish a rtmp stream.
3. play dash stream. -> no dash stream, always 404 error.
---------
Co-authored-by: winlin <winlinvip@gmail.com>
To manage an object:
```cpp
// Before
MyClass* ptr = new MyClass();
SrsAutoFree(MyClass, ptr);
ptr->do_something();
// Now
SrsUniquePtr<MyClass> ptr(new MyClass());
ptr->do_something();
```
To manage an array of objects:
```cpp
// Before
char* ptr = new char[10];
SrsAutoFreeA(char, ptr);
ptr[0] = 0xf;
// Now
SrsUniquePtr<char[]> ptr(new char[10]);
ptr[0] = 0xf;
```
In fact, SrsUniquePtr is a limited subset of SrsAutoFree, mainly
managing pointers and arrays. SrsUniquePtr is better than SrsAutoFree
because it has the same API to standard unique ptr.
```cpp
SrsUniquePtr<MyClass> ptr(new MyClass());
ptr->do_something();
MyClass* p = ptr.get();
```
SrsAutoFree actually uses a pointer to a pointer, so it can be set to
NULL, allowing the pointer's value to be changed later (this usage is
different from SrsUniquePtr).
```cpp
// OK to free ptr correctly.
MyClass* ptr;
SrsAutoFree(MyClass, ptr);
ptr = new MyClass();
// Crash because ptr is an invalid pointer.
MyClass* ptr;
SrsUniquePtr<MyClass> ptr(ptr);
ptr = new MyClass();
```
Additionally, SrsAutoFreeH can use specific release functions, which
SrsUniquePtr does not support.
---------
Co-authored-by: Jacob Su <suzp1984@gmail.com>
1. fix redundant null check, there is no potential risks by the way,
just redundant null check.
2. Potential use pointer after free, that's not true. So we can ignore
this one, or find a way to make stupid security tool happy.
---------
Co-authored-by: winlin <winlinvip@gmail.com>
1. Add live benchmark support in srs-bench, which only connects and
disconnects without any media transport, to test source creation and
disposal and verify source memory leaks.
2. SmartPtr: Support cleanup of HTTP-FLV stream. Unregister the HTTP-FLV
handler for the pattern and clean up the objects and resources.
3. Support benchmarking RTMP/SRT with srs-bench by integrating the gosrt
and oryx RTMP libraries.
4. Refine SRT and RTC sources by using a timer to clean up the sources,
following the same strategy as the Live source.
---------
Co-authored-by: Haibo Chen <495810242@qq.com>
Co-authored-by: Jacob Su <suzp1984@gmail.com>
The object relations:
Session manages SIP and Media object using shared resource or shared
ptr. Note that I actually use SrsExecutorCoroutine to delete the object
when each coroutine is done, because there is always a dedicate
coroutine for each object.
For SIP and Media object, they directly use the session by raw pointer,
it's safe because session always live longer than session and media
object.
---
Co-authored-by: Jacob Su <suzp1984@gmail.com>
Fix#4037 SRS should not send the publish start message
`onStatus(NetStream.Publish.Start)` if hooks fail, which causes OBS to
repeatedly reconnect.
Note that this fix does not send an RTMP error message when publishing
fails, because neither OBS nor FFmpeg process this specific error
message; they only display a general error.
Apart from the order of messages, nothing else has been changed.
Previously, we sent the publish start message
`onStatus(NetStream.Publish.Start)` before the HTTP hook `on_publish`;
now, we have modified it to send this message after the HTTP hook.
Fix#3967 There is an API `SSL_use_certificate_chain_file`, which can load the
certification chain and also single certificate.
---------
Co-authored-by: winlin <winlinvip@gmail.com>
1. `trunk/research/st/exceptions.cpp` About exceptions with ST, works
well on linux and mac, not work on cygwin.
2. `trunk/research/st/pthreads.cpp` About pthreads with ST, works well
on all platforms.
3. `trunk/research/st/hello.cpp` Hello world, without ST, works well on
all platforms.
4. `trunk/research/st/hello-world.cpp` Hello world, with ST, works well
on all platforms.
5. `trunk/research/st/hello-st.cpp` A very simple version for hello
world with ST, works well on all platforms.
When debugging the RTMP protocol, we can capture packets using tcpdump
and then replay the pcap file. For example:
```bash
cd ~/git/srs/trunk/3rdparty/srs-bench/pcap
tcpdump -i any -w t.pcap tcp port 1935
go run . -f ./t.pcap -s 127.0.0.1:1935
```
However, sometimes due to poor network conditions between the server and
the client, there may be many retransmitted packets. In such cases,
setting up a transparent TCP proxy that listens on port 1935 and
forwards to port 19350 can be a solution:
```bash
./objs/srs -c conf/origin.conf
cd 3rdparty/srs-bench/tcpproxy/ && go run main.go
tcpdump -i any -w t.pcap tcp port 19350
```
This approach allows for the implementation of packet dumping,
multipoint replication, or the provision of detailed timestamps and byte
information at the proxy. It enables the collection of debugging
information without the need to modify the server.
---------
`TRANS_BY_GPT4`
---------
Co-authored-by: john <hondaxiao@tencent.com>
1. When converting RTC to RTMP, it is necessary to synchronize the audio
and video timestamps. When the synchronization status changes, whether
it is unsynchronized or synchronized, print logs to facilitate
troubleshooting of such issues.
2. Chrome uses the STAP-A packet, which means a single RTP packet
contains SPS/PPS information. OBS WHIP, on the other hand, sends SPS and
PPS in separate RTP packets. Therefore, SPS and PPS are in two
independent RTP packets, and SRS needs to cache these two packets.
---------
Co-authored-by: john <hondaxiao@tencent.com>
HLS typically has a delay of around 30 seconds, roughly comprising three
segments, each lasting 10 seconds. We can reduce the delay to about 5
seconds by lowering the segment duration to 2 seconds and starting
playback from the last segment, achieving a stable delay.
Of course, this requires setting the OBS's GOP to 1 second, and the
profile to baseline, preset to fast, and tune to zerolatency.
Additionally, updating a few configurations in the hls.js player is
necessary, such as setting it to start playback from the last segment,
setting the maximum buffer, and initiating accelerated playback to
reduce latency.
---------
Co-authored-by: chundonglinlin <chundonglinlin@163.com>
Co-authored-by: john <hondaxiao@tencent.com>
For WebRTC:
when player before publisher, it will happen track pt didn't change.
- At source change step, change track pt
---------
Co-authored-by: mingche.tsai <w41203208.work@gmail.com>
Co-authored-by: john <hondaxiao@tencent.com>
Accommodate certain complex parameters that include the "=" character,
for example.
`configure --extra-flags="-O2 -D_FORTIFY_SOURCE=2"`
---------
Co-authored-by: john <hondaxiao@tencent.com>
Description
A crash occurs when a forward relay connection has not been established
and an unpublish event is triggered simultaneously. For instance, if DVR
and forward are configured with a specified DVR path that already
exists, initiating a stream will trigger a crash.
Objective
Fix the crash caused by the forward mechanism.
Additional Information
For detailed reproduction steps, please refer to issue #3901.
---------
Co-authored-by: john <hondaxiao@tencent.com>
In an SDK that supports RTC Opus stereo, the parameter "stereo=1" may
appear. SRS (Spatial Reference System) needs to handle this correctly
and return an answer to enable WebRTC stereo support.
---------
`TRANS_BY_GPT4`
Winlin
Jacob Su
Bahamut
jb-alvarado
Haibo Chen
Marc Olzheim
johzzy
Jay
john
chundonglinlin
Laurentiu