You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
FreeRTOS/FreeRTOS-Plus/Source/FreeRTOS-Cellular-Modules/FreeRTOS-Cellular-Interface.../cellular_hl7802.h

151 lines
5.5 KiB
C

/*
* FreeRTOS-Cellular-Interface v1.3.0
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*/
#ifndef __CELLULAR_HL7802_H__
#define __CELLULAR_HL7802_H__
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
#define MIN_TCP_SESSION_ID ( 1U )
#define MAX_TCP_SESSION_ID ( 6U )
#define TCP_SESSION_TABLE_LEGNTH ( MAX_TCP_SESSION_ID + 1 )
#define INVALID_SOCKET_INDEX ( UINT32_MAX )
#define INVALID_SESSION_ID ( UINT32_MAX )
/* Delay after AT+CFUN=1,1 commands. */
#ifndef CELLULAR_HL7802_RESET_DELAY_MS
#define CELLULAR_HL7802_RESET_DELAY_MS ( 3000U )
#endif
/* AT command recommended timeout value for HL7802. Reference HL7802 AT Commands
* Interface Guide to setup the timeout value for each AT commands. */
#define CELLULAR_HL7802_AT_TIMEOUT_2_SECONDS_MS ( 2000U )
#define CELLULAR_HL7802_AT_TIMEOUT_5_SECONDS_MS ( 5000U )
#define CELLULAR_HL7802_AT_TIMEOUT_30_SECONDS_MS ( 30000U )
#define CELLULAR_HL7802_AT_TIMEOUT_60_SECONDS_MS ( 60000U )
#define CELLULAR_HL7802_AT_TIMEOUT_120_SECONDS_MS ( 120000U )
/* Define the following timeout value since they are content dependent or no recommended value. */
#ifndef CELLULAR_HL7802_AT_KSELACQ_TIMEOUT_MS
#define CELLULAR_HL7802_AT_KSELACQ_TIMEOUT_MS CELLULAR_HL7802_AT_TIMEOUT_5_SECONDS_MS
#endif
#ifndef CELLULAR_HL7802_AT_KEDRXCFG_TIMEOUT_MS
#define CELLULAR_HL7802_AT_KEDRXCFG_TIMEOUT_MS CELLULAR_HL7802_AT_TIMEOUT_5_SECONDS_MS
#endif
#ifndef CELLULAR_HL7802_AT_KCNXUP_TIMEOUT_MS
#define CELLULAR_HL7802_AT_KCNXUP_TIMEOUT_MS CELLULAR_HL7802_AT_TIMEOUT_30_SECONDS_MS
#endif
#ifndef CELLULAR_HL7802_AT_KCNXDOWN_TIMEOUT_MS
#define CELLULAR_HL7802_AT_KCNXDOWN_TIMEOUT_MS CELLULAR_HL7802_AT_TIMEOUT_30_SECONDS_MS
#endif
/* Band configuration for HL7802. */
#ifndef CELLULAR_CONFIG_HL7802_CATM1_BAND
/* Default enable all bands. */
#define CELLULAR_CONFIG_HL7802_CATM1_BAND "0002000000000F0F1B9F"
#endif
#ifndef CELLULAR_CONFIG_HL7802_NBIOT_BAND
/* Default enable all bands. */
#define CELLULAR_CONFIG_HL7802_NBIOT_BAND "0002000000000B0F189F"
#endif
/*-----------------------------------------------------------*/
typedef struct cellularModuleContext
{
uint32_t pSessionMap[ TCP_SESSION_TABLE_LEGNTH ];
} cellularModuleContext_t;
typedef enum tcpSocketState
{
TCP_SOCKET_STATE_NOT_DEFINED = 0,
TCP_SOCKET_STATE_DEFINED_BUT_NOT_USED = 1,
TCP_SOCKET_STATE_OPENING_AND_CONNECTING = 2,
TCP_SOCKET_STATE_CONNECTION_UP = 3,
TCP_SOCKET_STATE_CONNECTION_CLOSING = 4,
TCP_SOCKET_STATE_CLOSED = 5,
TCP_SOCKET_STATE_MAX
} tcpSocketState_t;
typedef enum tcpConnectionFailure
{
TCP_NOTIF_OK = -1,
TCP_NOTIF_NETWORK_ERROR = 0,
TCP_NOTIF_NO_MORE_SOCKETS_AVAILABLE = 1,
TCP_NOTIF_MEMORY_PROBLEM = 2,
TCP_NOTIF_DNS_ERROR = 3,
TCP_NOTIF_TCP_DISCONNECTION = 4,
TCP_NOTIF_TCP_CONNECTION_ERROR = 5,
TCP_NOTIF_GENERIC_ERROR = 6,
TCP_NOTIF_FAIL_TO_ACCEPT_CLIENT_REQUEST = 7,
TCP_NOTIF_KTCPSND_WAITING_FOR_MORE_OR_LESS_CHARACTERS = 8,
TCP_NOTIF_BAD_SESSION_ID = 9,
TCP_NOTIF_SESSION_IS_ALREADY_RUNNING = 10,
TCP_NOTIF_ALL_SESSIONS_ARE_USED = 11,
TCP_NOTIF_SOCKET_CONNECTION_TIMEOUT_ERROR = 12,
TCP_NOTIF_SSL_CONNECTION_ERROR = 13,
TCP_NOTIF_SSL_INITIALIZATION_ERROR = 14,
TCP_NOTIF_MAX,
} tcpConnectionFailure_t;
/*-----------------------------------------------------------*/
uint32_t _Cellular_GetSocketId( CellularContext_t * pContext,
uint8_t sessionId );
uint32_t _Cellular_GetSessionId( CellularContext_t * pContext,
uint32_t socketIndex );
/*-----------------------------------------------------------*/
extern CellularAtParseTokenMap_t CellularUrcHandlerTable[];
extern uint32_t CellularUrcHandlerTableSize;
extern const char * CellularSrcTokenErrorTable[];
extern uint32_t CellularSrcTokenErrorTableSize;
extern const char * CellularSrcTokenSuccessTable[];
extern uint32_t CellularSrcTokenSuccessTableSize;
extern const char * CellularUrcTokenWoPrefixTable[];
extern uint32_t CellularUrcTokenWoPrefixTableSize;
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* ifndef __CELLULAR_HL7802_H__ */