Add URL file links to the MQTT agent documentation page.
Add comment blocks into each demo that also point toward the MQTT agent documentation to ensure users are aware the agent method exists.
From the FreeRTOS documentation, pdFREERTOS_ERRNO_ENOSPC means that timeout occurred before any data could be sent or received.
- In the plaintext transport-interface implementation, we would directly return `-pdFREERTOS_ERRNO_ENOSPC`. However, an error like this can occur when the TCP buffer is full, so this ought to be retriable. Libraries that consume the transport interface interpret a return value of 0 to mean that send/recv can be invoked again to get the data. As such, we should appropriately set the return value as 0 when the status is `-pdFREERTOS_ERRNO_ENOSPC`.
- In the mbedTLS port, we would directly return whatever `FreeRTOS_send` or `FreeRTOS_recv` returns. However, sometimes, the return value can be an error. In such cases, we ought to map an error from FreeRTOS+TCP to an equivalent error in mbedTLS. In the case of `-pdFREERTOS_ERRNO_ENOSPC`, we map that to `MBEDTLS_ERR_SSL_TIMEOUT`. When the mbedTLS transport-interface send/recv wrapper sees that value, it appropriately returns 0, so that the library can retry the send/recv. I've verified that when the mbedTLS port returns an error, that same error is returned by `mbedtls_ssl_write` & `mbedtls_ssl_read`.
- The TCP socket may have a receive block time. If bytesToRecv is greater than 1 then a frame is likely already part way through reception and blocking to wait for the desired number of bytes to be available is the
most efficient thing to do. If bytesToRecv is 1 then this may be a speculative call to read to find the start of a new frame, in which case blocking is not desirable as it could block an entire protocol agent task for the duration of the read block time and therefore negatively impact performance. So if bytesToRecv is 1 then don't call recv unless it is known that bytes are already available.
Co-authored-by: abhidixi11 <44424462+abhidixi11@users.noreply.github.com>
Co-authored-by: RichardBarry <3073890+RichardBarry@users.noreply.github.com>
Small change that simply specifies why the NetworkContext must be defined by each compilation unit along with details on how to include it to your project.
Co-authored-by: Cobus van Eeden <35851496+cobusve@users.noreply.github.com>
The MQTT library has been updated with the MQTT_RECV_POLLING_TIMEOUT_MS and MQTT_SEND_RETRY_TIMEOUT_MS configurations which should be set to zero when using a dummy timer function to avoid possibility of infinite loop when retrying failed transport send/receive calls. As the MQTT Keep Alive demo uses a dummy timer function, this PR updates the demo configuration to set these timeouts to zero.
The FreeRTOS+TCP submodule pointer was set to a commit not in main,
which also lacked commits in main, which ended up causing build failures
for defender demo.
* Submodule wolfSSL and move wolfSSL and WolfSSL-FIPS-Ready to ThirdParty folder.
* Update VS studio project.
* Update FIPS project settings.
* Update FIPS demo readme.
* Add md to ignored file extensions.
By removing the definition of the NetworkContext struct in the header file, we allow the application to define it. This allows an application writer to use multiple transports in the same compilation unit. That way, multiple .c files do not have to be created for each transport.
The API of FreeRTOS/backoffAlgorithm library has changed to remove dependency on random number generator; instead require the caller to generate the random number and pass it to the BackoffAlgorithm_GetNextBackoff API for backoff period calculation. This PR updates the submodule pointer commit, and updates the demos and tests to use the simplied library API
A new repository, FreeRTOS/backoffAlgorithm, has been created for hosting the library for backoff calculation. This repo replaces the FreeRTOS-Plus/Source/Utilities/exponential_backoff with the submodule to the new repository, and updates all the demos that use retry logic to use the backoffAlgorithm API
Adding common utilities that will be used by 4 coreHTTP demos:
- Adding coreHTTP submodule pointer to FreeRTOS-Plus/Source/Application-Protocols/coreHTTP
- Adding folder FreeRTOS-Plus/Demo/coreHTTP_Windows_Simulator/Http_Demo_Helpers with functions common to demos.
* Add submodule pointer to the aws/jobs-for-aws-iot-embedded-sdk repository for the Jobs library
* Commonize the MQTT helper functions used by the Device Shadow demo by re-locating them to FreeRTOS-Plus/Demo/AWS/MQTT_Demo_Helpers and updating the Device Shadow demo to use the new files
* URLs have changed on the FreeRTOS.org site - this commit matches the URLs in the code with the new URLs on the website.
* Add link to device shadow directory to the shadow docs.
* Update main.c
* Update main.c
* Update readme.txt
* Update main.c
* Update main.c
* Update readme.txt
Co-authored-by: yngki <47755894+yngki@users.noreply.github.com>
* Update logging_stack.h file to avoid use of __FUNCTION__ macro
* Revert to use __FUNCTION__ instead of __FILE__
* Fix comment about metadata format
* Fix incorrect mapping of SdkLog function
* Fix typo causing LOG_METADATA_ARGS to be undefined
* Fix another bug with SdkLog macro definition
* Fix formatting
* Move mapping of SdkLog to vLoggingPrintf from logging_stack to config files
* Remove dependency of LIBRARY_LOG_NAME on LIBRARY_METADATA_* macros
* Minor improvements
Co-authored-by: Gary Wicker <14828980+gkwicker@users.noreply.github.com>
Co-authored-by: RichardBarry <3073890+RichardBarry@users.noreply.github.com>
* Update to the WolfSSL FIPS ready demo: Add a debug break point into the configASSERT() implementation along with a comment telling users how to update the integrity check hash if they hit the breakpoint.
* Updates in the root directory: Remove "New - Stream and Message Buffers.url" as the feature is no longer new, and edit the readme.md file as the repo now contains 'core' libraries in addition to 'FreeRTOS+' libraries.
* FreeRTOS-Plus/Source/Utilities: Add readme files and links to documentation.
* Application-Protocols: Add readme and URL links.
* Remove Index.html from the end of a URL in the readme.txt file.
* Demo-IP-Protocols: Add readme.txt files and code comments saying the protocols are not intended for production use.
* coreMQTT: Remove links to deprecated documentation, add readme and correct links to documentation.
* General: Correct URLs in source files and .url files.
* Update readme.txt
This updates the platform and logging directory and moves it to the following places:
FreeRTOS\FreeRTOS-Plus\Source\Utilities
FreeRTOS\FreeRTOS-Plus\Source\Application-Protocols\network_transport\freertos_plus_tcp
Project files are updated to follow suite. All updated demos are tested to work as expected.
printf-stdarg.c seems have to been moved by mistake when moving logging sources to a common folder.
Also, because logging.c is specific to Windows, it is moved to FreeRTOS-Plus/Demo/Common/Logging/Logging_WinSim.c.
This updates FreeRTOS-Plus/Source/Application-Protocols/platform folder based on feedback to include separate folders for tls and plaintext. In addition, the device-shadow-for-aws-iot-embedded-c submodule is renamed to device-shadow.
- Remove unused headers in the plaintext FreeRTOS sockets wrapper
- Update MFLN even though the preceding optional configuration returned an mbedTLS error
- Remove an unused `NULL` check in a private method that is already checked by the public connect method
- Add a `NULL` check to the public disconnect method
Co-authored-by: Joseph Julicher <jjulicher@mac.com>
* deleted old version wolfSSL before updating
* updated wolfSSL to the latest version(v4.4.0)
* updated wolfSSL to the latest version(v4.4.0)
* added macros for timing resistance
* Add wolfSSL-FIPS-Ready to Demo and Source
* Add wolfSSL-FIPS-Ready to Demo and Source
* Update README_wolfSSL_FIPS_Ready.md
* Remove unused files
* Update to wolfSSL-4.5.0-FIPS-Ready
* Increase FIPS version number for the default
* Update wolfSSL to the latest version(v.4.5.0)
* Fix version number
* Fix comments from github
Co-authored-by: RichardBarry <3073890+RichardBarry@users.noreply.github.com>
Co-authored-by: Ming Yue <mingyue86010@gmail.com>
Co-authored-by: Aniruddha Kanhere <60444055+AniruddhaKanhere@users.noreply.github.com>
Co-authored-by: Cobus van Eeden <35851496+cobusve@users.noreply.github.com>
Co-authored-by: Alfred Gedeon <alfred2g@hotmail.com>
This removes a warning involving const qualifiers. The NetworkContext_t * cannot be declared as const in TransportRecv and TransportSend because mbedtls_ssl_write and mbedtls_ssl_read require non-const pointers. Therefore, the const qualifier is removed from transport_interface.h.
As suggested, because logging_stack.h and logging_levels.h are used not only by demos but also by platform-specific transport code, it would make sense to move FreeRTOS-Plus/Demos/Common/Logging to FreeRTOS-Plus/Source/Logging. The same is done for demo_logging.c and demo_logging.h, which are duplicated by several demos. Win32.vcxproj project files are also updated to follow suite.
This updates submodules for coreMQTT, coreJSON, and AWS Device Shadow. Some of which contain library fixes.
* Update coreMQTT to latest commit
* Update submodules for coreJSON and AWS Device Shadow to latest commit
In addition to fixing MISRA warnings, code is updated to have complexity <= 8. Also, this adds changes from PR #313, which allows the support of simultaneous connections in the mbedTLS transport wrapper.
Co-authored-by: Muneeb Ahmed <54290492+muneebahmed10@users.noreply.github.com>
- Fix the config file header include gaurd
- Fixes comments only in the main prvMQTTDemoTask( void * pvParameters )
- Deletes unused headers.
- Check the return value of MQTT_Disconnect().
Co-authored-by: Oscar Michael Abrina <abrinao@amazon.com>
This moves the MQTT Mutual Auth Demo under FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/MQTT_Mutual_Auth
The project files such as WIN32.vcxproj and WIN32.vcxproj.filters are updated to point to the sources and includes from the coreMQTT submodule.
No changes are made to the actual code. Only paths are updated.
Co-authored-by: Muneeb Ahmed <54290492+muneebahmed10@users.noreply.github.com>
Co-authored-by: SarenaAWS <6563840+sarenameas@users.noreply.github.com>
Co-authored-by: leegeth <51681119+leegeth@users.noreply.github.com>
This adds coreMQTT, coreJSON, and Device Shadow as submodules to the following directories:
coreMQTT: FreeRTOS-Plus/Source/Application-Protocols/coreMQTT
coreJSON: FreeRTOS-Plus/Source/coreJSON
Device Shadow: FreeRTOS/FreeRTOS-Plus/Source/AWS/device-shadow-for-aws-iot-embedded-sdk
Platform sources and includes that are utilized by these libraries are also moved from lts-development branch to master:
FreeRTOS-Plus/Source/FreeRTOS-IoT-Libraries-LTS-Beta2/c_sdk/platform (lts-development) ->
FreeRTOS-Plus/Source/Application-Protocols/platform (master)
Co-authored-by: abhidixi11 <44424462+abhidixi11@users.noreply.github.com>
Co-authored-by: leegeth <51681119+leegeth@users.noreply.github.com>
Co-authored-by: Muneeb Ahmed <54290492+muneebahmed10@users.noreply.github.com>
Co-authored-by: Carl Lundin <53273776+lundinc2@users.noreply.github.com>
* Use unsigned types/constants where needed.
* Address MISRA 21.15 violations in FreeRTOS_Sockets.c
* Address MISRA rule violations in code (primarily Rule 2.2)
* Inline had been disabled for Coverity builds, preventing
Coverity from correctly identifying dead code; this change
removes the disabling of inline during Coverity builds.
* Added an explanation for the inline suppression of Rule
11.4 in prvSocketValid().
* Address MISRA Rule Violations (10.4 & 10.8)
* MISRA: Rule 21.15 changes
Co-authored-by: Aniruddha Kanhere <60444055+AniruddhaKanhere@users.noreply.github.com>
* Change type of usGenerateChecksum's ulAlignBits to intptr_t
Not all platforms have 32-bit pointers. 8-bit machines such as avr8 have
16-bit pointers.
This patch changes the type of ulAlignBits and renames it to uxAlignBits to
reflect the type change.
This fixes a compiler warning on machines with pointers that aren't
32-bits.
Signed-off-by: Andy Bennett <andyjpb@ashurst.eu.org>
* Fix usGenerateChecksum on odd-aligned buffers with non zero usSum
usGenerateChecksum would generate an incorrect checksum when pucNextData
was odd-aligned and usSum was non-zero.
This was caused by the byte order of usSum not matching the byte order of
the subsequent summing operation.
Odd-aligned buffers are common on 8-bit platforms such as avr8 when using
one of the FreeRTOS dynamic heap allocators.
Signed-off-by: Andy Bennett <andyjpb@ashurst.eu.org>
* Feedback from PR#122
https://github.com/FreeRTOS/FreeRTOS/pull/122
+ Use a uintptr_t rather than an intptr_t.
Changes supplied by Hein Tibosch.
Signed-off-by: Andy Bennett <andyjpb@ashurst.eu.org>
Co-authored-by: Aniruddha Kanhere <60444055+AniruddhaKanhere@users.noreply.github.com>
* Use unsigned types/constants where needed.
* Address MISRA 21.15 violations in FreeRTOS_Sockets.c
* Address MISRA rule violations in code (primarily Rule 2.2)
* Inline had been disabled for Coverity builds, preventing
Coverity from correctly identifying dead code; this change
removes the disabling of inline during Coverity builds.
* Added an explanation for the inline suppression of Rule
11.4 in prvSocketValid().
Co-authored-by: Aniruddha Kanhere <60444055+AniruddhaKanhere@users.noreply.github.com>
* Build: transform scons into Makefile
* Build: add Makefile dependencies
* Build: remove some tabs from Makefile
* Build: Make builds out of source, move wait for event to kernel port
* Test: update the full test to print status messages
* Build: replace lpthread with pthread
Co-authored-by: Alfred Gedeon <gedeonag@amazon.com>
* Update FreeRTOS_IP_Private.h
* Update FreeRTOS_Sockets.h
* Update FreeRTOS_DNS.c
* Correct version number
* Update version number
* Update version number
* deleted old version wolfSSL before updating
* updated wolfSSL to the latest version(v4.4.0)
* updated wolfSSL to the latest version(v4.4.0)
* added macros for timing resistance
Co-authored-by: RichardBarry <3073890+RichardBarry@users.noreply.github.com>
Co-authored-by: Ming Yue <mingyue86010@gmail.com>
* Adding a combined +TCP driver for SAM4E and SAME70
* Changes after review from Aniruddha
Co-authored-by: Hein Tibosch <hein@htibosch.net>
Co-authored-by: Aniruddha Kanhere <60444055+AniruddhaKanhere@users.noreply.github.com>
* Add fail-safes to FreeRTOS_Socket.c
* Use all 'pd' errors
* Correction after Hein's comments
* Correction after Hein's comments v2
* Changes after Hein's comments
* Update after Gary's comments
* Add TaskNotifyArray.c with the single task tests updated to use the task notification array up to the point where the timer is created.
* Continue working on TaskNotifyArray.c to test the new task notification indexes. Next TaskNotifyArray.c will be refactored to break the tests up a bit.
* Refactor and update the comments in TaskNotifyArray.c - no functional changes.
* Change from the task notify "array" to task notification "indexed" nomenclature in the new task notification API functions that work on one particular task notification with the array of task notifications.
* Update the implementation of the taskNOTIFY_TAKE() and taskNOTIFY_WAIT() trace macros to take the array index of the task notification they are acting on.
Rename configNUMBER_OF_TASK_NOTIFICATIONS to configTASK_NOTIFICATION_ARRAY_ENTRIES.
Add FreeRTOS/Demo/Common/Minimal/TaskNotifyArray.c to the Visual Studio project - the file implements tests specific to the behaviour of the indexed task notification functions and should be used in addition to the tests already provided in FreeRTOS/Demo/Common/Minimal/TaskNotify.c.
- removed (void) from before memcpy, memset etc.
- corrected memcpy style as suggested by Yuhui
- Added logging for xNetworkInterfaceOutput. No need to configASSERT
Notes:
- header has version 2.2.0.
- This sync did not bring in ./test directory, though we should.
- New NetworkInterfaces are introduced by this merge.
- Keil compiler support.
- FreeRTOS_IP.h new API xApplicationGetRandomNumber().
- FreeRTOS_IP_Private.h new eIPEvent_t eNetworkTxEvent.
- FreeRTOS_Stream_Buffer.h removing static xStreamBufferIsEmpty() and xStreamBufferIsFull().
- FreeRTOSConfigDefaults.h provides default ipconfigDNS_RECEIVE_BLOCK_TIME_TICKS.
- other type changes.
The cut down version of the task pool has only one task pool, namely,
system task pool. All the task pool API functions accept NULL as a
valid parameter for IotTaskPool_t and use the system task pool when
NULL is passed for the system task pool.
IOT_SYSTEM_TASKPOOL is defined to NULL to use system task pool and
therefore the above assert is no longer valid.
IotTaskPool_GetSystemTaskPool has been removed from the cut down version
of the task pool. define IOT_SYSTEM_TASKPOOL to NULL so that the MQTT library
builds successfully.
Use the new #defines in the iot_config.h.
IotTaskPool_CreateSystemTaskPool() calls synchronisation primitives, so cannot be called before the scheduler starts. Add a configASSERT() to ensure the scheduler is running when it executes.
IotTaskPool_CreateSystemTaskPool() can conceivably be called from multiple different libraries that depend on the thread pool. In this version _IotSystemTaskPool.running can be used to check the system task pool has not already been created. If the task pool has been created simply return from IotTaskPool_CreateSystemTaskPool() instead of re-creating it (which would leak memory and leave orphaned tasks).
Call taskENTER_CRITICAL() and taskEXIT_CRITICAL() directly in place of mapping them to TASKPOOL_ENTER_CRITICAL() and TASKPOOL_EXIT_CRITICAL() in the same file.
Rename _timerThread() _timerCallback(), as it is a callback function and not a thread.
Remove the unused flags parameter from _scheduleInternal().
which was brought into the main download in FreeRTOS V10.0.0. FreeRTOS+TCP can
be configured as a UDP only stack, and FreeRTOS+UDP does not contain the patches
applied to FreeRTOS+TCP.
Update to V2.0.7 of the TCP/IP stack:
+ Multiple security improvements and fixes in packet parsing routines, DNS
caching, and TCP sequence number and ID generation.
+ Disable NBNS and LLMNR by default.
+ Add TCP hang protection by default.
We thank Ori Karliner of Zimperium zLabs Team for reporting these issues.
Update queue code to allow an overwrite operation on a queue that is in a queue set, and add prvTestQueueOverwriteWithQueueSet() to test function.
Update Eclipse Win32 project to bring it closer the the Visual Studio equivalent.
Oscar Michael Abrina
RichardBarry
Archit Aggarwal
Carl Lundin
Archit Gupta
yngki
alfred gedeon
leegeth
Sukhmani Minhas
Aniruddha Kanhere
Erik Tamlin
TakayukiMatsuo
andysun2015
SarenaAWS
Gary Wicker
Andy Bennett
Ravishankar Bhagavandas
Ming Yue
Hein Tibosch
Richard Barry
Yuhui.Zheng
Gaurav Aggarwal