diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Config/FreeRTOSConfig.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Config/FreeRTOSConfig.h new file mode 100644 index 0000000000..016f389fc3 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Config/FreeRTOSConfig.h @@ -0,0 +1,240 @@ +/* + * FreeRTOS Kernel V10.2.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +#include "unity_internals.h" + + /*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * http://www.freertos.org/a00110.html + * + * The bottom of this file contains some constants specific to running the UDP + * stack in this demo. Constants specific to FreeRTOS+TCP itself (rather than + * the demo) are contained in FreeRTOSIPConfig.h. + *----------------------------------------------------------*/ +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#define configMAX_PRIORITIES ( 7 ) +#define configTICK_RATE_HZ ( 1000 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */ +#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 60 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the Win32 thread. */ +#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 2048U * 1024U ) ) +#define configMAX_TASK_NAME_LEN ( 15 ) +#define configUSE_TRACE_FACILITY 1 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_CO_ROUTINES 0 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configQUEUE_REGISTRY_SIZE 0 +#define configUSE_APPLICATION_TASK_TAG 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configUSE_ALTERNATIVE_API 0 +#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 3 /* FreeRTOS+FAT requires 2 pointers if a CWD is supported. */ +#define configRECORD_STACK_HIGH_ADDRESS 1 + + /* Hook function related definitions. */ +#define configUSE_TICK_HOOK 0 +#define configUSE_IDLE_HOOK 1 +#define configUSE_MALLOC_FAILED_HOOK 1 +#define configCHECK_FOR_STACK_OVERFLOW 0 /* Not applicable to the Win32 port. */ + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) +#define configTIMER_QUEUE_LENGTH 5 +#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 ) + +/* Event group related definitions. */ +#define configUSE_EVENT_GROUPS 1 + +/* Run time stats gathering definitions. */ +unsigned long ulGetRunTimeCounterValue(void); +void vConfigureTimerForRunTimeStats(void); +#define configGENERATE_RUN_TIME_STATS 1 +#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() vConfigureTimerForRunTimeStats() +#define portGET_RUN_TIME_COUNTER_VALUE() ulGetRunTimeCounterValue() + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) + +/* Currently the TCP/IP stack is using dynamic allocation, and the MQTT task is + * using static allocation. */ +#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 + + /* Set the following definitions to 1 to include the API function, or zero + * to exclude the API function. */ +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskCleanUpResources 0 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 1 +#define INCLUDE_xTaskGetSchedulerState 1 +#define INCLUDE_xTimerGetTimerTaskHandle 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xQueueGetMutexHolder 1 +#define INCLUDE_eTaskGetState 1 +#define INCLUDE_xEventGroupSetBitsFromISR 1 +#define INCLUDE_xTimerPendFunctionCall 1 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_xTaskAbortDelay 1 + + /* This demo makes use of one or more example stats formatting functions. These + * format the raw data provided by the uxTaskGetSystemState() function in to human + * readable ASCII form. See the notes in the implementation of vTaskList() within + * FreeRTOS/Source/tasks.c for limitations. configUSE_STATS_FORMATTING_FUNCTIONS + * is set to 2 so the formatting functions are included without the stdio.h being + * included in tasks.c. That is because this project defines its own sprintf() + * functions. */ +#define configUSE_STATS_FORMATTING_FUNCTIONS 1 + + /* Assert call defined for debug builds. */ +void vAssertCalled(const char* pcFile, + uint32_t ulLine); + +#define configASSERT( x ) if( ( x ) == 0 ) TEST_ABORT() + +/* The function that implements FreeRTOS printf style output, and the macro + * that maps the configPRINTF() macros to that function. */ +void vLoggingPrintf(char const* pcFormat, + ...); +#define configPRINTF( X ) vLoggingPrintf X + +/* Non-format version thread-safe print. */ +extern void vLoggingPrint(const char* pcMessage); +#define configPRINT( X ) vLoggingPrint( X ) + +/* Non-format version thread-safe print. */ +#define configPRINT_STRING( X ) vLoggingPrintf( X ) + +/* Application specific definitions follow. **********************************/ + +/* If configINCLUDE_DEMO_DEBUG_STATS is set to one, then a few basic IP trace + * macros are defined to gather some UDP stack statistics that can then be viewed + * through the CLI interface. */ +#define configINCLUDE_DEMO_DEBUG_STATS 1 + + /* The size of the global output buffer that is available for use when there + * are multiple command interpreters running at once (for example, one on a UART + * and one on TCP/IP). This is done to prevent an output buffer being defined by + * each implementation - which would waste RAM. In this case, there is only one + * command interpreter running, and it has its own local output buffer, so the + * global buffer is just set to be one byte long as it is not used and should not + * take up unnecessary RAM. */ +#define configCOMMAND_INT_MAX_OUTPUT_SIZE 1 + + /* Only used when running in the FreeRTOS Windows simulator. Defines the + * priority of the task used to simulate Ethernet interrupts. */ +#define configMAC_ISR_SIMULATOR_PRIORITY ( configMAX_PRIORITIES - 1 ) + + /* This demo creates a virtual network connection by accessing the raw Ethernet + * or WiFi data to and from a real network connection. Many computers have more + * than one real network port, and configNETWORK_INTERFACE_TO_USE is used to tell + * the demo which real port should be used to create the virtual port. The ports + * available are displayed on the console when the application is executed. For + * example, on my development laptop setting configNETWORK_INTERFACE_TO_USE to 4 + * results in the wired network being used, while setting + * configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being + * used. */ +#define configNETWORK_INTERFACE_TO_USE ( 0L ) + + /* The address of an echo server that will be used by the two demo echo client + * tasks: + * http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_Echo_Clients.html, + * http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/UDP_Echo_Clients.html. */ +#define configECHO_SERVER_ADDR0 192 +#define configECHO_SERVER_ADDR1 168 +#define configECHO_SERVER_ADDR2 2 +#define configECHO_SERVER_ADDR3 6 +#define configTCP_ECHO_CLIENT_PORT 7 + + /* Default MAC address configuration. The demo creates a virtual network + * connection that uses this MAC address by accessing the raw Ethernet/WiFi data + * to and from a real network connection on the host PC. See the + * configNETWORK_INTERFACE_TO_USE definition above for information on how to + * configure the real network connection to use. */ +#define configMAC_ADDR0 0x00 +#define configMAC_ADDR1 0x11 +#define configMAC_ADDR2 0x22 +#define configMAC_ADDR3 0x33 +#define configMAC_ADDR4 0x44 +#define configMAC_ADDR5 0x32 + + /* Default IP address configuration. Used in ipconfigUSE_DHCP is set to 0, or + * ipconfigUSE_DHCP is set to 1 but a DNS server cannot be contacted. */ +#define configIP_ADDR0 192 +#define configIP_ADDR1 168 +#define configIP_ADDR2 0 +#define configIP_ADDR3 105 + + /* Default gateway IP address configuration. Used in ipconfigUSE_DHCP is set to + * 0, or ipconfigUSE_DHCP is set to 1 but a DNS server cannot be contacted. */ +#define configGATEWAY_ADDR0 192 +#define configGATEWAY_ADDR1 168 +#define configGATEWAY_ADDR2 0 +#define configGATEWAY_ADDR3 1 + + /* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and + * 208.67.220.220. Used in ipconfigUSE_DHCP is set to 0, or ipconfigUSE_DHCP is + * set to 1 but a DNS server cannot be contacted.*/ +#define configDNS_SERVER_ADDR0 208 +#define configDNS_SERVER_ADDR1 67 +#define configDNS_SERVER_ADDR2 222 +#define configDNS_SERVER_ADDR3 222 + + /* Default netmask configuration. Used in ipconfigUSE_DHCP is set to 0, or + * ipconfigUSE_DHCP is set to 1 but a DNS server cannot be contacted. */ +#define configNET_MASK0 255 +#define configNET_MASK1 255 +#define configNET_MASK2 255 +#define configNET_MASK3 0 + + /* The UDP port to which print messages are sent. */ +#define configPRINT_PORT ( 15000 ) + +#define configPROFILING ( 0 ) + +/* Pseudo random number generater used by some demo tasks. */ +extern uint32_t ulRand(); +#define configRAND32() ulRand() + +/* The platform that FreeRTOS is running on. */ +#define configPLATFORM_NAME "WinSim" + + +#endif /* FREERTOS_CONFIG_H */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Config/FreeRTOSIPConfig.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Config/FreeRTOSIPConfig.h new file mode 100644 index 0000000000..93388b5cd8 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Config/FreeRTOSIPConfig.h @@ -0,0 +1,305 @@ +/* +FreeRTOS Kernel V10.2.0 +Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS +FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR +COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + + http://aws.amazon.com/freertos + http://www.FreeRTOS.org +*/ + + +/***************************************************************************** +* +* See the following URL for configuration information. +* http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_IP_Configuration.html +* +*****************************************************************************/ + +#ifndef FREERTOS_IP_CONFIG_H +#define FREERTOS_IP_CONFIG_H + +/* Set to 1 to print out debug messages. If ipconfigHAS_DEBUG_PRINTF is set to + * 1 then FreeRTOS_debug_printf should be defined to the function used to print + * out the debugging messages. */ +#define ipconfigHAS_DEBUG_PRINTF 0 +#if ( ipconfigHAS_DEBUG_PRINTF == 1 ) +#define FreeRTOS_debug_printf( X ) configPRINTF( X ) +#endif + + /* Set to 1 to print out non debugging messages, for example the output of the + * FreeRTOS_netstat() command, and ping replies. If ipconfigHAS_PRINTF is set to 1 + * then FreeRTOS_printf should be set to the function used to print out the + * messages. */ +#define ipconfigHAS_PRINTF 1 +#if ( ipconfigHAS_PRINTF == 1 ) +#define FreeRTOS_printf( X ) configPRINTF( X ) +#endif + + /* Define the byte order of the target MCU (the MCU FreeRTOS+TCP is executing + * on). Valid options are pdFREERTOS_BIG_ENDIAN and pdFREERTOS_LITTLE_ENDIAN. */ +#define ipconfigBYTE_ORDER pdFREERTOS_LITTLE_ENDIAN + + /* If the network card/driver includes checksum offloading (IP/TCP/UDP checksums) + * then set ipconfigDRIVER_INCLUDED_RX_IP_CHECKSUM to 1 to prevent the software + * stack repeating the checksum calculations. */ +#define ipconfigDRIVER_INCLUDED_RX_IP_CHECKSUM 1 + + /* Several API's will block until the result is known, or the action has been + * performed, for example FreeRTOS_send() and FreeRTOS_recv(). The timeouts can be + * set per socket, using setsockopt(). If not set, the times below will be + * used as defaults. */ +#define ipconfigSOCK_DEFAULT_RECEIVE_BLOCK_TIME ( 5000 ) +#define ipconfigSOCK_DEFAULT_SEND_BLOCK_TIME ( 5000 ) + + /* Include support for DNS caching. For TCP, having a small DNS cache is very + * useful. When a cache is present, ipconfigDNS_REQUEST_ATTEMPTS can be kept low + * and also DNS may use small timeouts. If a DNS reply comes in after the DNS + * socket has been destroyed, the result will be stored into the cache. The next + * call to FreeRTOS_gethostbyname() will return immediately, without even creating + * a socket. + */ +#define ipconfigUSE_DNS_CACHE ( 1 ) +#define ipconfigDNS_CACHE_ADDRESSES_PER_ENTRY ( 6 ) +#define ipconfigDNS_REQUEST_ATTEMPTS ( 2 ) + + /* The IP stack executes it its own task (although any application task can make + * use of its services through the published sockets API). ipconfigUDP_TASK_PRIORITY + * sets the priority of the task that executes the IP stack. The priority is a + * standard FreeRTOS task priority so can take any value from 0 (the lowest + * priority) to (configMAX_PRIORITIES - 1) (the highest priority). + * configMAX_PRIORITIES is a standard FreeRTOS configuration parameter defined in + * FreeRTOSConfig.h, not FreeRTOSIPConfig.h. Consideration needs to be given as to + * the priority assigned to the task executing the IP stack relative to the + * priority assigned to tasks that use the IP stack. */ +#define ipconfigIP_TASK_PRIORITY ( configMAX_PRIORITIES - 2 ) + + /* The size, in words (not bytes), of the stack allocated to the FreeRTOS+TCP + * task. This setting is less important when the FreeRTOS Win32 simulator is used + * as the Win32 simulator only stores a fixed amount of information on the task + * stack. FreeRTOS includes optional stack overflow detection, see: + * http://www.freertos.org/Stacks-and-stack-overflow-checking.html. */ +#define ipconfigIP_TASK_STACK_SIZE_WORDS ( configMINIMAL_STACK_SIZE * 5 ) + + /* ipconfigRAND32() is called by the IP stack to generate random numbers for + * things such as a DHCP transaction number or initial sequence number. Random + * number generation is performed via this macro to allow applications to use their + * own random number generation method. For example, it might be possible to + * generate a random number by sampling noise on an analogue input. */ +extern uint32_t ulRand(); +#define ipconfigRAND32() ulRand() + +/* If ipconfigUSE_NETWORK_EVENT_HOOK is set to 1 then FreeRTOS+TCP will call the + * network event hook at the appropriate times. If ipconfigUSE_NETWORK_EVENT_HOOK + * is not set to 1 then the network event hook will never be called. See: + * http://www.FreeRTOS.org/FreeRTOS-Plus/FreeRTOS_Plus_UDP/API/vApplicationIPNetworkEventHook.shtml. + */ +#define ipconfigUSE_NETWORK_EVENT_HOOK 1 + + /* Sockets have a send block time attribute. If FreeRTOS_sendto() is called but + * a network buffer cannot be obtained then the calling task is held in the Blocked + * state (so other tasks can continue to executed) until either a network buffer + * becomes available or the send block time expires. If the send block time expires + * then the send operation is aborted. The maximum allowable send block time is + * capped to the value set by ipconfigMAX_SEND_BLOCK_TIME_TICKS. Capping the + * maximum allowable send block time prevents prevents a deadlock occurring when + * all the network buffers are in use and the tasks that process (and subsequently + * free) the network buffers are themselves blocked waiting for a network buffer. + * ipconfigMAX_SEND_BLOCK_TIME_TICKS is specified in RTOS ticks. A time in + * milliseconds can be converted to a time in ticks by dividing the time in + * milliseconds by portTICK_PERIOD_MS. */ +#define ipconfigUDP_MAX_SEND_BLOCK_TIME_TICKS ( 5000 / portTICK_PERIOD_MS ) + + /* If ipconfigUSE_DHCP is 1 then FreeRTOS+TCP will attempt to retrieve an IP + * address, netmask, DNS server address and gateway address from a DHCP server. If + * ipconfigUSE_DHCP is 0 then FreeRTOS+TCP will use a static IP address. The + * stack will revert to using the static IP address even when ipconfigUSE_DHCP is + * set to 1 if a valid configuration cannot be obtained from a DHCP server for any + * reason. The static configuration used is that passed into the stack by the + * FreeRTOS_IPInit() function call. */ +#define ipconfigUSE_DHCP 1 +#define ipconfigDHCP_REGISTER_HOSTNAME 1 +#define ipconfigDHCP_USES_UNICAST 1 + + /* If ipconfigDHCP_USES_USER_HOOK is set to 1 then the application writer must + * provide an implementation of the DHCP callback function, + * xApplicationDHCPUserHook(). */ +#define ipconfigUSE_DHCP_HOOK 0 + + /* When ipconfigUSE_DHCP is set to 1, DHCP requests will be sent out at + * increasing time intervals until either a reply is received from a DHCP server + * and accepted, or the interval between transmissions reaches + * ipconfigMAXIMUM_DISCOVER_TX_PERIOD. The IP stack will revert to using the + * static IP address passed as a parameter to FreeRTOS_IPInit() if the + * re-transmission time interval reaches ipconfigMAXIMUM_DISCOVER_TX_PERIOD without + * a DHCP reply being received. */ +#define ipconfigMAXIMUM_DISCOVER_TX_PERIOD \ + ( 120000 / portTICK_PERIOD_MS ) + + /* The ARP cache is a table that maps IP addresses to MAC addresses. The IP + * stack can only send a UDP message to a remove IP address if it knowns the MAC + * address associated with the IP address, or the MAC address of the router used to + * contact the remote IP address. When a UDP message is received from a remote IP + * address the MAC address and IP address are added to the ARP cache. When a UDP + * message is sent to a remote IP address that does not already appear in the ARP + * cache then the UDP message is replaced by a ARP message that solicits the + * required MAC address information. ipconfigARP_CACHE_ENTRIES defines the maximum + * number of entries that can exist in the ARP table at any one time. */ +#define ipconfigARP_CACHE_ENTRIES 6 + + /* ARP requests that do not result in an ARP response will be re-transmitted a + * maximum of ipconfigMAX_ARP_RETRANSMISSIONS times before the ARP request is + * aborted. */ +#define ipconfigMAX_ARP_RETRANSMISSIONS ( 5 ) + + /* ipconfigMAX_ARP_AGE defines the maximum time between an entry in the ARP + * table being created or refreshed and the entry being removed because it is stale. + * New ARP requests are sent for ARP cache entries that are nearing their maximum + * age. ipconfigMAX_ARP_AGE is specified in tens of seconds, so a value of 150 is + * equal to 1500 seconds (or 25 minutes). */ +#define ipconfigMAX_ARP_AGE 150 + + /* Implementing FreeRTOS_inet_addr() necessitates the use of string handling + * routines, which are relatively large. To save code space the full + * FreeRTOS_inet_addr() implementation is made optional, and a smaller and faster + * alternative called FreeRTOS_inet_addr_quick() is provided. FreeRTOS_inet_addr() + * takes an IP in decimal dot format (for example, "192.168.0.1") as its parameter. + * FreeRTOS_inet_addr_quick() takes an IP address as four separate numerical octets + * (for example, 192, 168, 0, 1) as its parameters. If + * ipconfigINCLUDE_FULL_INET_ADDR is set to 1 then both FreeRTOS_inet_addr() and + * FreeRTOS_indet_addr_quick() are available. If ipconfigINCLUDE_FULL_INET_ADDR is + * not set to 1 then only FreeRTOS_indet_addr_quick() is available. */ +#define ipconfigINCLUDE_FULL_INET_ADDR 1 + + /* ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS defines the total number of network buffer that + * are available to the IP stack. The total number of network buffers is limited + * to ensure the total amount of RAM that can be consumed by the IP stack is capped + * to a pre-determinable value. */ +#define ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS 60 + + /* A FreeRTOS queue is used to send events from application tasks to the IP + * stack. ipconfigEVENT_QUEUE_LENGTH sets the maximum number of events that can + * be queued for processing at any one time. The event queue must be a minimum of + * 5 greater than the total number of network buffers. */ +#define ipconfigEVENT_QUEUE_LENGTH \ + ( ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS + 5 ) + + /* The address of a socket is the combination of its IP address and its port + * number. FreeRTOS_bind() is used to manually allocate a port number to a socket + * (to 'bind' the socket to a port), but manual binding is not normally necessary + * for client sockets (those sockets that initiate outgoing connections rather than + * wait for incoming connections on a known port number). If + * ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND is set to 1 then calling + * FreeRTOS_sendto() on a socket that has not yet been bound will result in the IP + * stack automatically binding the socket to a port number from the range + * socketAUTO_PORT_ALLOCATION_START_NUMBER to 0xffff. If + * ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND is set to 0 then calling FreeRTOS_sendto() + * on a socket that has not yet been bound will result in the send operation being + * aborted. */ +#define ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND 1 + + /* Defines the Time To Live (TTL) values used in outgoing UDP packets. */ +#define ipconfigUDP_TIME_TO_LIVE 128 +/* Also defined in FreeRTOSIPConfigDefaults.h. */ +#define ipconfigTCP_TIME_TO_LIVE 128 + +/* USE_TCP: Use TCP and all its features. */ +#define ipconfigUSE_TCP ( 1 ) + +/* USE_WIN: Let TCP use windowing mechanism. */ +#define ipconfigUSE_TCP_WIN ( 1 ) + +/* The MTU is the maximum number of bytes the payload of a network frame can + * contain. For normal Ethernet V2 frames the maximum MTU is 1500. Setting a + * lower value can save RAM, depending on the buffer management scheme used. If + * ipconfigCAN_FRAGMENT_OUTGOING_PACKETS is 1 then (ipconfigNETWORK_MTU - 28) must + * be divisible by 8. */ +#define ipconfigNETWORK_MTU 1200 + + /* Set ipconfigUSE_DNS to 1 to include a basic DNS client/resolver. DNS is used + * through the FreeRTOS_gethostbyname() API function. */ +#define ipconfigUSE_DNS 1 + + /* If ipconfigREPLY_TO_INCOMING_PINGS is set to 1 then the IP stack will + * generate replies to incoming ICMP echo (ping) requests. */ +#define ipconfigREPLY_TO_INCOMING_PINGS 1 + + /* If ipconfigSUPPORT_OUTGOING_PINGS is set to 1 then the + * FreeRTOS_SendPingRequest() API function is available. */ +#define ipconfigSUPPORT_OUTGOING_PINGS 0 + + /* If ipconfigSUPPORT_SELECT_FUNCTION is set to 1 then the FreeRTOS_select() + * (and associated) API function is available. */ +#define ipconfigSUPPORT_SELECT_FUNCTION 0 + + /* If ipconfigFILTER_OUT_NON_ETHERNET_II_FRAMES is set to 1 then Ethernet frames + * that are not in Ethernet II format will be dropped. This option is included for + * potential future IP stack developments. */ +#define ipconfigFILTER_OUT_NON_ETHERNET_II_FRAMES 1 + + /* If ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES is set to 1 then it is the + * responsibility of the Ethernet interface to filter out packets that are of no + * interest. If the Ethernet interface does not implement this functionality, then + * set ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES to 0 to have the IP stack + * perform the filtering instead (it is much less efficient for the stack to do it + * because the packet will already have been passed into the stack). If the + * Ethernet driver does all the necessary filtering in hardware then software + * filtering can be removed by using a value other than 1 or 0. */ +#define ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES 1 + + /* The windows simulator cannot really simulate MAC interrupts, and needs to + * block occasionally to allow other tasks to run. */ +#define configWINDOWS_MAC_INTERRUPT_SIMULATOR_DELAY ( 20 / portTICK_PERIOD_MS ) + + /* Advanced only: in order to access 32-bit fields in the IP packets with + * 32-bit memory instructions, all packets will be stored 32-bit-aligned, + * plus 16-bits. This has to do with the contents of the IP-packets: all + * 32-bit fields are 32-bit-aligned, plus 16-bit. */ +#define ipconfigPACKET_FILLER_SIZE 2 + + /* Define the size of the pool of TCP window descriptors. On the average, each + * TCP socket will use up to 2 x 6 descriptors, meaning that it can have 2 x 6 + * outstanding packets (for Rx and Tx). When using up to 10 TP sockets + * simultaneously, one could define TCP_WIN_SEG_COUNT as 120. */ +#define ipconfigTCP_WIN_SEG_COUNT 240 + + /* Each TCP socket has a circular buffers for Rx and Tx, which have a fixed + * maximum size. Define the size of Rx buffer for TCP sockets. */ +#define ipconfigTCP_RX_BUFFER_LENGTH ( 10000 ) + + /* Define the size of Tx buffer for TCP sockets. */ +#define ipconfigTCP_TX_BUFFER_LENGTH ( 10000 ) + +/* When using call-back handlers, the driver may check if the handler points to + * real program memory (RAM or flash) or just has a random non-zero value. */ +#define ipconfigIS_VALID_PROG_ADDRESS( x ) ( ( x ) != NULL ) + + /* Include support for TCP keep-alive messages. */ +#define ipconfigTCP_KEEP_ALIVE ( 1 ) +#define ipconfigTCP_KEEP_ALIVE_INTERVAL ( 20 ) /* Seconds. */ + +/* The socket semaphore is used to unblock the MQTT task. */ +#define ipconfigSOCKET_HAS_USER_SEMAPHORE ( 0 ) + +#define ipconfigSOCKET_HAS_USER_WAKE_CALLBACK ( 1 ) +#define ipconfigUSE_CALLBACKS ( 0 ) + + +#define portINLINE __inline + +#endif /* FREERTOS_IP_CONFIG_H */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Full-TCP-Suite.sln b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Full-TCP-Suite.sln new file mode 100644 index 0000000000..f907d968a0 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Full-TCP-Suite.sln @@ -0,0 +1,23 @@ + +Microsoft Visual Studio Solution File, Format Version 11.00 +# Visual Studio 2010 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "RTOSDemo", "WIN32.vcxproj", "{C686325E-3261-42F7-AEB1-DDE5280E1CEB}" +EndProject +Global + GlobalSection(TestCaseManagementSettings) = postSolution + CategoryFile = FreeRTOS_Plus_TCP_Minimal.vsmdi + EndGlobalSection + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Win32 = Debug|Win32 + Release|Win32 = Release|Win32 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {C686325E-3261-42F7-AEB1-DDE5280E1CEB}.Debug|Win32.ActiveCfg = Debug|Win32 + {C686325E-3261-42F7-AEB1-DDE5280E1CEB}.Debug|Win32.Build.0 = Debug|Win32 + {C686325E-3261-42F7-AEB1-DDE5280E1CEB}.Release|Win32.ActiveCfg = Release|Win32 + {C686325E-3261-42F7-AEB1-DDE5280E1CEB}.Release|Win32.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Logging/demo_logging.c b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Logging/demo_logging.c new file mode 100644 index 0000000000..0d33b0968b --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Logging/demo_logging.c @@ -0,0 +1,526 @@ +/* + * FreeRTOS Kernel V10.3.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/* + * Logging utility that allows FreeRTOS tasks to log to a UDP port, stdout, and + * disk file without making any Win32 system calls themselves. + * + * Messages logged to a UDP port are sent directly (using FreeRTOS+TCP), but as + * FreeRTOS tasks cannot make Win32 system calls messages sent to stdout or a + * disk file are sent via a stream buffer to a Win32 thread which then performs + * the actual output. + */ + +/* Standard includes. */ +#include +#include +#include +#include +#include + +/* FreeRTOS includes. */ +#include +#include "task.h" + +/* FreeRTOS+TCP includes. */ +#include "FreeRTOS_IP.h" +#include "FreeRTOS_Sockets.h" +#include "FreeRTOS_Stream_Buffer.h" + +/* Demo includes. */ +#include "demo_logging.h" + +/*-----------------------------------------------------------*/ + +/* The maximum size to which the log file may grow, before being renamed +to .ful. */ +#define dlLOGGING_FILE_SIZE ( 40ul * 1024ul * 1024ul ) + +/* Dimensions the arrays into which print messages are created. */ +#define dlMAX_PRINT_STRING_LENGTH 255 + +/* The size of the stream buffer used to pass messages from FreeRTOS tasks to +the Win32 thread that is responsible for making any Win32 system calls that are +necessary for the selected logging method. */ +#define dlLOGGING_STREAM_BUFFER_SIZE 32768 + +/* A block time of zero simply means don't block. */ +#define dlDONT_BLOCK 0 + +/*-----------------------------------------------------------*/ + +/* + * Called from vLoggingInit() to start a new disk log file. + */ +static void prvFileLoggingInit( void ); + +/* + * Attempt to write a message to the file. + */ +static void prvLogToFile( const char *pcMessage, size_t xLength ); + +/* + * Simply close the logging file, if it is open. + */ +static void prvFileClose( void ); + +/* + * Before the scheduler is started this function is called directly. After the + * scheduler has started it is called from the Windows thread dedicated to + * outputting log messages. Only the windows thread actually performs the + * writing so as not to disrupt the simulation by making Windows system calls + * from FreeRTOS tasks. + */ +static void prvLoggingFlushBuffer( void ); + +/* + * The windows thread that performs the actual writing of messages that require + * Win32 system calls. Only the windows thread can make system calls so as not + * to disrupt the simulation by making Windows calls from FreeRTOS tasks. + */ +static DWORD WINAPI prvWin32LoggingThread( void *pvParam ); + +/* + * Creates the socket to which UDP messages are sent. This function is not + * called directly to prevent the print socket being created from within the IP + * task - which could result in a deadlock. Instead the function call is + * deferred to run in the RTOS daemon task - hence it prototype. + */ +static void prvCreatePrintSocket( void *pvParameter1, uint32_t ulParameter2 ); + +/*-----------------------------------------------------------*/ + +/* Windows event used to wake the Win32 thread which performs any logging that +needs Win32 system calls. */ +static void *pvLoggingThreadEvent = NULL; + +/* Stores the selected logging targets passed in as parameters to the +vLoggingInit() function. */ +BaseType_t xStdoutLoggingUsed = pdFALSE, xDiskFileLoggingUsed = pdFALSE, xUDPLoggingUsed = pdFALSE; + +/* Circular buffer used to pass messages from the FreeRTOS tasks to the Win32 +thread that is responsible for making Win32 calls (when stdout or a disk log is +used). */ +static StreamBuffer_t *xLogStreamBuffer = NULL; + +/* Handle to the file used for logging. This is left open while there are +messages waiting to be logged, then closed again in between logs. */ +static FILE *pxLoggingFileHandle = NULL; + +/* When true prints are performed directly. After start up xDirectPrint is set +to pdFALSE - at which time prints that require Win32 system calls are done by +the Win32 thread responsible for logging. */ +BaseType_t xDirectPrint = pdTRUE; + +/* File names for the in use and complete (full) log files. */ +static const char *pcLogFileName = "RTOSDemo.log"; +static const char *pcFullLogFileName = "RTOSDemo.ful"; + +/* Keep the current file size in a variable, as an optimisation. */ +static size_t ulSizeOfLoggingFile = 0ul; + +/* The UDP socket and address on/to which print messages are sent. */ +Socket_t xPrintSocket = FREERTOS_INVALID_SOCKET; +struct freertos_sockaddr xPrintUDPAddress; + +/*-----------------------------------------------------------*/ + +void vLoggingInit( BaseType_t xLogToStdout, BaseType_t xLogToFile, BaseType_t xLogToUDP, uint32_t ulRemoteIPAddress, uint16_t usRemotePort ) +{ + /* Can only be called before the scheduler has started. */ + configASSERT( xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED ); + + #if( ( ipconfigHAS_DEBUG_PRINTF == 1 ) || ( ipconfigHAS_PRINTF == 1 ) ) + { + HANDLE Win32Thread; + + /* Record which output methods are to be used. */ + xStdoutLoggingUsed = xLogToStdout; + xDiskFileLoggingUsed = xLogToFile; + xUDPLoggingUsed = xLogToUDP; + + /* If a disk file is used then initialise it now. */ + if( xDiskFileLoggingUsed != pdFALSE ) + { + prvFileLoggingInit(); + } + + /* If UDP logging is used then store the address to which the log data + will be sent - but don't create the socket yet because the network is + not initialised. */ + if( xUDPLoggingUsed != pdFALSE ) + { + /* Set the address to which the print messages are sent. */ + xPrintUDPAddress.sin_port = FreeRTOS_htons( usRemotePort ); + xPrintUDPAddress.sin_addr = ulRemoteIPAddress; + } + + /* If a disk file or stdout are to be used then Win32 system calls will + have to be made. Such system calls cannot be made from FreeRTOS tasks + so create a stream buffer to pass the messages to a Win32 thread, then + create the thread itself, along with a Win32 event that can be used to + unblock the thread. */ + if( ( xStdoutLoggingUsed != pdFALSE ) || ( xDiskFileLoggingUsed != pdFALSE ) ) + { + /* Create the buffer. */ + xLogStreamBuffer = ( StreamBuffer_t * ) malloc( sizeof( *xLogStreamBuffer ) - sizeof( xLogStreamBuffer->ucArray ) + dlLOGGING_STREAM_BUFFER_SIZE + 1 ); + configASSERT( xLogStreamBuffer ); + memset( xLogStreamBuffer, '\0', sizeof( *xLogStreamBuffer ) - sizeof( xLogStreamBuffer->ucArray ) ); + xLogStreamBuffer->LENGTH = dlLOGGING_STREAM_BUFFER_SIZE + 1; + + /* Create the Windows event. */ + pvLoggingThreadEvent = CreateEvent( NULL, FALSE, TRUE, "StdoutLoggingEvent" ); + + /* Create the thread itself. */ + Win32Thread = CreateThread( + NULL, /* Pointer to thread security attributes. */ + 0, /* Initial thread stack size, in bytes. */ + prvWin32LoggingThread, /* Pointer to thread function. */ + NULL, /* Argument for new thread. */ + 0, /* Creation flags. */ + NULL ); + + /* Use the cores that are not used by the FreeRTOS tasks. */ + SetThreadAffinityMask( Win32Thread, ~0x01u ); + SetThreadPriorityBoost( Win32Thread, TRUE ); + SetThreadPriority( Win32Thread, THREAD_PRIORITY_IDLE ); + } + } + #else + { + /* FreeRTOSIPConfig is set such that no print messages will be output. + Avoid compiler warnings about unused parameters. */ + ( void ) xLogToStdout; + ( void ) xLogToFile; + ( void ) xLogToUDP; + ( void ) usRemotePort; + ( void ) ulRemoteIPAddress; + } + #endif /* ( ipconfigHAS_DEBUG_PRINTF == 1 ) || ( ipconfigHAS_PRINTF == 1 ) */ +} +/*-----------------------------------------------------------*/ + +static void prvCreatePrintSocket( void *pvParameter1, uint32_t ulParameter2 ) +{ +static const TickType_t xSendTimeOut = pdMS_TO_TICKS( 0 ); +Socket_t xSocket; + + /* The function prototype is that of a deferred function, but the parameters + are not actually used. */ + ( void ) pvParameter1; + ( void ) ulParameter2; + + xSocket = FreeRTOS_socket( FREERTOS_AF_INET, FREERTOS_SOCK_DGRAM, FREERTOS_IPPROTO_UDP ); + + if( xSocket != FREERTOS_INVALID_SOCKET ) + { + /* FreeRTOS+TCP decides which port to bind to. */ + FreeRTOS_setsockopt( xSocket, 0, FREERTOS_SO_SNDTIMEO, &xSendTimeOut, sizeof( xSendTimeOut ) ); + FreeRTOS_bind( xSocket, NULL, 0 ); + + /* Now the socket is bound it can be assigned to the print socket. */ + xPrintSocket = xSocket; + } +} +/*-----------------------------------------------------------*/ + +void vLoggingPrintf( const char *pcFormat, ... ) +{ +char cPrintString[ dlMAX_PRINT_STRING_LENGTH ]; +char cOutputString[ dlMAX_PRINT_STRING_LENGTH ]; +char *pcSource, *pcTarget, *pcBegin; +size_t xLength, xLength2, rc; +static BaseType_t xMessageNumber = 0; +va_list args; +uint32_t ulIPAddress; +const char *pcTaskName; +const char *pcNoTask = "None"; +int iOriginalPriority; +HANDLE xCurrentTask; + + + if( ( xStdoutLoggingUsed != pdFALSE ) || ( xDiskFileLoggingUsed != pdFALSE ) || ( xUDPLoggingUsed != pdFALSE ) ) + { + /* There are a variable number of parameters. */ + va_start( args, pcFormat ); + + /* Additional info to place at the start of the log. */ + if( xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED ) + { + pcTaskName = pcTaskGetName( NULL ); + } + else + { + pcTaskName = pcNoTask; + } + + if( strcmp( pcFormat, "\n" ) != 0 ) + { + xLength = snprintf( cPrintString, dlMAX_PRINT_STRING_LENGTH, "%lu %lu [%s] ", + xMessageNumber++, + ( unsigned long ) xTaskGetTickCount(), + pcTaskName ); + } + else + { + xLength = 0; + memset( cPrintString, 0x00, dlMAX_PRINT_STRING_LENGTH ); + } + + xLength2 = vsnprintf( cPrintString + xLength, dlMAX_PRINT_STRING_LENGTH - xLength, pcFormat, args ); + + if( xLength2 < 0 ) + { + /* Clean up. */ + xLength2 = dlMAX_PRINT_STRING_LENGTH - 1 - xLength; + cPrintString[ dlMAX_PRINT_STRING_LENGTH - 1 ] = '\0'; + } + + xLength += xLength2; + va_end( args ); + + /* For ease of viewing, copy the string into another buffer, converting + IP addresses to dot notation on the way. */ + pcSource = cPrintString; + pcTarget = cOutputString; + + while( ( *pcSource ) != '\0' ) + { + *pcTarget = *pcSource; + pcTarget++; + pcSource++; + + /* Look forward for an IP address denoted by 'ip'. */ + if( ( isxdigit( pcSource[ 0 ] ) != pdFALSE ) && ( pcSource[ 1 ] == 'i' ) && ( pcSource[ 2 ] == 'p' ) ) + { + *pcTarget = *pcSource; + pcTarget++; + *pcTarget = '\0'; + pcBegin = pcTarget - 8; + + while( ( pcTarget > pcBegin ) && ( isxdigit( pcTarget[ -1 ] ) != pdFALSE ) ) + { + pcTarget--; + } + + sscanf( pcTarget, "%8X", &ulIPAddress ); + rc = sprintf( pcTarget, "%lu.%lu.%lu.%lu", + ( unsigned long ) ( ulIPAddress >> 24UL ), + ( unsigned long ) ( (ulIPAddress >> 16UL) & 0xffUL ), + ( unsigned long ) ( (ulIPAddress >> 8UL) & 0xffUL ), + ( unsigned long ) ( ulIPAddress & 0xffUL ) ); + pcTarget += rc; + pcSource += 3; /* skip "ip" */ + } + } + + /* How far through the buffer was written? */ + xLength = ( BaseType_t ) ( pcTarget - cOutputString ); + + /* If the message is to be logged to a UDP port then it can be sent directly + because it only uses FreeRTOS function (not Win32 functions). */ + if( xUDPLoggingUsed != pdFALSE ) + { + if( ( xPrintSocket == FREERTOS_INVALID_SOCKET ) && ( FreeRTOS_IsNetworkUp() != pdFALSE ) ) + { + /* Create and bind the socket to which print messages are sent. The + xTimerPendFunctionCall() function is used even though this is + not an interrupt because this function is called from the IP task + and the IP task cannot itself wait for a socket to bind. The + parameters to prvCreatePrintSocket() are not required so set to + NULL or 0. */ + xTimerPendFunctionCall( prvCreatePrintSocket, NULL, 0, dlDONT_BLOCK ); + } + + if( xPrintSocket != FREERTOS_INVALID_SOCKET ) + { + FreeRTOS_sendto( xPrintSocket, cOutputString, xLength, 0, &xPrintUDPAddress, sizeof( xPrintUDPAddress ) ); + + /* Just because the UDP data logger I'm using is dumb. */ + FreeRTOS_sendto( xPrintSocket, "\r", sizeof( char ), 0, &xPrintUDPAddress, sizeof( xPrintUDPAddress ) ); + } + } + + /* If logging is also to go to either stdout or a disk file then it cannot + be output here - so instead write the message to the stream buffer and wake + the Win32 thread which will read it from the stream buffer and perform the + actual output. */ + if( ( xStdoutLoggingUsed != pdFALSE ) || ( xDiskFileLoggingUsed != pdFALSE ) ) + { + configASSERT( xLogStreamBuffer ); + + /* How much space is in the buffer? */ + xLength2 = uxStreamBufferGetSpace( xLogStreamBuffer ); + + /* There must be enough space to write both the string and the length of + the string. */ + if( xLength2 >= ( xLength + sizeof( xLength ) ) ) + { + /* First write in the length of the data, then write in the data + itself. Raising the thread priority is used as a critical section + as there are potentially multiple writers. The stream buffer is + only thread safe when there is a single writer (likewise for + reading from the buffer). */ + xCurrentTask = GetCurrentThread(); + iOriginalPriority = GetThreadPriority( xCurrentTask ); + SetThreadPriority( GetCurrentThread(), THREAD_PRIORITY_TIME_CRITICAL ); + uxStreamBufferAdd( xLogStreamBuffer, 0, ( const uint8_t * ) &( xLength ), sizeof( xLength ) ); + uxStreamBufferAdd( xLogStreamBuffer, 0, ( const uint8_t * ) cOutputString, xLength ); + SetThreadPriority( GetCurrentThread(), iOriginalPriority ); + } + + /* xDirectPrint is initialised to pdTRUE, and while it remains true the + logging output function is called directly. When the system is running + the output function cannot be called directly because it would get + called from both FreeRTOS tasks and Win32 threads - so instead wake the + Win32 thread responsible for the actual output. */ + if( xDirectPrint != pdFALSE ) + { + /* While starting up, the thread which calls prvWin32LoggingThread() + is not running yet and xDirectPrint will be pdTRUE. */ + prvLoggingFlushBuffer(); + } + else if( pvLoggingThreadEvent != NULL ) + { + /* While running, wake up prvWin32LoggingThread() to send the + logging data. */ + SetEvent( pvLoggingThreadEvent ); + } + } + } +} +/*-----------------------------------------------------------*/ + +static void prvLoggingFlushBuffer( void ) +{ +size_t xLength; +char cPrintString[ dlMAX_PRINT_STRING_LENGTH ]; + + /* Is there more than the length value stored in the circular buffer + used to pass data from the FreeRTOS simulator into this Win32 thread? */ + while( uxStreamBufferGetSize( xLogStreamBuffer ) > sizeof( xLength ) ) + { + memset( cPrintString, 0x00, dlMAX_PRINT_STRING_LENGTH ); + uxStreamBufferGet( xLogStreamBuffer, 0, ( uint8_t * ) &xLength, sizeof( xLength ), pdFALSE ); + uxStreamBufferGet( xLogStreamBuffer, 0, ( uint8_t * ) cPrintString, xLength, pdFALSE ); + + /* Write the message to standard out if requested to do so when + vLoggingInit() was called, or if the network is not yet up. */ + if( ( xStdoutLoggingUsed != pdFALSE ) || ( FreeRTOS_IsNetworkUp() == pdFALSE ) ) + { + /* Write the message to stdout. */ + printf( "%s", cPrintString ); /*_RB_ Replace with _write(). */ + } + + /* Write the message to a file if requested to do so when + vLoggingInit() was called. */ + if( xDiskFileLoggingUsed != pdFALSE ) + { + prvLogToFile( cPrintString, xLength ); + } + } + + prvFileClose(); +} +/*-----------------------------------------------------------*/ + +static DWORD WINAPI prvWin32LoggingThread( void *pvParameter ) +{ +const DWORD xMaxWait = 1000; + + ( void ) pvParameter; + + /* From now on, prvLoggingFlushBuffer() will only be called from this + Windows thread */ + xDirectPrint = pdFALSE; + + for( ;; ) + { + /* Wait to be told there are message waiting to be logged. */ + WaitForSingleObject( pvLoggingThreadEvent, xMaxWait ); + + /* Write out all waiting messages. */ + prvLoggingFlushBuffer(); + } +} +/*-----------------------------------------------------------*/ + +static void prvFileLoggingInit( void ) +{ +FILE *pxHandle = fopen( pcLogFileName, "a" ); + + if( pxHandle != NULL ) + { + fseek( pxHandle, SEEK_END, 0ul ); + ulSizeOfLoggingFile = ftell( pxHandle ); + fclose( pxHandle ); + } + else + { + ulSizeOfLoggingFile = 0ul; + } +} +/*-----------------------------------------------------------*/ + +static void prvFileClose( void ) +{ + if( pxLoggingFileHandle != NULL ) + { + fclose( pxLoggingFileHandle ); + pxLoggingFileHandle = NULL; + } +} +/*-----------------------------------------------------------*/ + +static void prvLogToFile( const char *pcMessage, size_t xLength ) +{ + if( pxLoggingFileHandle == NULL ) + { + pxLoggingFileHandle = fopen( pcLogFileName, "a" ); + } + + if( pxLoggingFileHandle != NULL ) + { + fwrite( pcMessage, 1, xLength, pxLoggingFileHandle ); + ulSizeOfLoggingFile += xLength; + + /* If the file has grown to its maximum permissible size then close and + rename it - then start with a new file. */ + if( ulSizeOfLoggingFile > ( size_t ) dlLOGGING_FILE_SIZE ) + { + prvFileClose(); + if( _access( pcFullLogFileName, 00 ) == 0 ) + { + remove( pcFullLogFileName ); + } + rename( pcLogFileName, pcFullLogFileName ); + ulSizeOfLoggingFile = 0; + } + } +} +/*-----------------------------------------------------------*/ + diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Logging/demo_logging.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Logging/demo_logging.h new file mode 100644 index 0000000000..e94f7bf3ed --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Logging/demo_logging.h @@ -0,0 +1,48 @@ +/* + * FreeRTOS Kernel V10.3.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef DEMO_LOGGING_H +#define DEMO_LOGGING_H + +/* + * Initialise a logging system that can be used from FreeRTOS tasks and Win32 + * threads. Do not call printf() directly while the scheduler is running. + * + * Set xLogToStdout, xLogToFile and xLogToUDP to either pdTRUE or pdFALSE to + * lot to stdout, a disk file and a UDP port respectively. + * + * If xLogToUDP is pdTRUE then ulRemoteIPAddress and usRemotePort must be set + * to the IP address and port number to which UDP log messages will be sent. + */ +void vLoggingInit( BaseType_t xLogToStdout, + BaseType_t xLogToFile, + BaseType_t xLogToUDP, + uint32_t ulRemoteIPAddress, + uint16_t usRemotePort ); + +#endif /* DEMO_LOGGING_H */ + diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Logging/run-time-stats-utils.c b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Logging/run-time-stats-utils.c new file mode 100644 index 0000000000..f289c2327a --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Logging/run-time-stats-utils.c @@ -0,0 +1,101 @@ +/* + * FreeRTOS V1.4.8 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + + +/* + * Utility functions required to gather run time statistics. See: + * http://www.freertos.org/rtos-run-time-stats.html + * + * Note that this is a simulated port, where simulated time is a lot slower than + * real time, therefore the run time counter values have no real meaningful + * units. + * + * Also note that it is assumed this demo is going to be used for short periods + * of time only, and therefore timer overflows are not handled. + */ + +/* FreeRTOS includes. */ +#include + +/* Variables used in the creation of the run time stats time base. Run time + * stats record how much time each task spends in the Running state. */ +static long long llInitialRunTimeCounterValue = 0LL, llTicksPerHundedthMillisecond = 0LL; + +/*-----------------------------------------------------------*/ + +void vConfigureTimerForRunTimeStats( void ) +{ + LARGE_INTEGER liPerformanceCounterFrequency, liInitialRunTimeValue; + + /* Initialise the variables used to create the run time stats time base. + * Run time stats record how much time each task spends in the Running + * state. */ + + if( QueryPerformanceFrequency( &liPerformanceCounterFrequency ) == 0 ) + { + llTicksPerHundedthMillisecond = 1; + } + else + { + /* How many times does the performance counter increment in 1/100th + * millisecond. */ + llTicksPerHundedthMillisecond = liPerformanceCounterFrequency.QuadPart / 100000LL; + + /* What is the performance counter value now, this will be subtracted + * from readings taken at run time. */ + QueryPerformanceCounter( &liInitialRunTimeValue ); + llInitialRunTimeCounterValue = liInitialRunTimeValue.QuadPart; + } +} +/*-----------------------------------------------------------*/ + +unsigned long ulGetRunTimeCounterValue( void ) +{ + LARGE_INTEGER liCurrentCount; + unsigned long ulReturn; + + /* What is the performance counter value now? */ + QueryPerformanceCounter( &liCurrentCount ); + + /* Subtract the performance counter value reading taken when the + * application started to get a count from that reference point, then + * scale to (simulated) 1/100ths of a millisecond. */ + if( llTicksPerHundedthMillisecond == 0 ) + { + /* The trace macros can call this function before the kernel has been + * started, in which case llTicksPerHundedthMillisecond will not have been + * initialised. */ + ulReturn = 0; + } + else + { + ulReturn = ( unsigned long ) + ( ( liCurrentCount.QuadPart - llInitialRunTimeCounterValue ) / + llTicksPerHundedthMillisecond ); + } + + return ulReturn; +} +/*-----------------------------------------------------------*/ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/ReadMe.txt b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/ReadMe.txt new file mode 100644 index 0000000000..34adcf7353 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/ReadMe.txt @@ -0,0 +1,23 @@ +The FreeRTOS+TCP source code and example projects are currently provided in +their own .zip file download, but using the directory structure of the official +FreeRTOS .zip file download. This allow the projects to be seamlessly moved +from one download to the other, but can seem strange when the files are viewed +in isolation. + +The FreeRTOS+TCP test suite Visual Studio project file is in the following +directory: FreeRTOS-Plus\Test\FreeRTOS-Plus-TCP\Integration\Full-TCP-Suite + +This project is a version of the standard FreeRTOS demos that includes the +integration tests of +TCP. It tests the +TCP stack through the use of FreeRTOS_Sockets +API. To Run this project, make sure that the computer is connected to a network +via ethernet cable. +- Open the project (using file named `Full-TCP-Suite.sln`) and +choose the required network interface by modifying this line `#define +configNETWORK_INTERFACE_TO_USE` in FreeRTOSConfig.h. +- Modify the `tcptestECHO_SERVER_ADDR[0-3]` and `tcptestECHO_PORT` in the file +`test_tcp.h` according to the address of the unsecure echo server of your choosing. +An implementation of echo server is provided here: +https://docs.aws.amazon.com/freertos/latest/portingguide/afr-echo-server.html + +Once these changes are made, just build and run the project. It should run 23 test +of which all should pass with a proper connection. diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Read_Me_Build_Instructions.url b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Read_Me_Build_Instructions.url new file mode 100644 index 0000000000..f01ec1411d --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Read_Me_Build_Instructions.url @@ -0,0 +1,6 @@ +[{000214A0-0000-0000-C000-000000000046}] +Prop3=19,2 +[InternetShortcut] +URL=http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/examples_FreeRTOS_simulator.html +IDList= +HotKey=0 diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/application_version.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/application_version.h new file mode 100644 index 0000000000..bf78174b12 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/application_version.h @@ -0,0 +1,36 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +#ifndef _AWS_APPLICATION_VERSION_H_ +#define _AWS_APPLICATION_VERSION_H_ + +#include "iot_appversion32.h" +extern const AppVersion32_t xAppFirmwareVersion; + +#define APP_VERSION_MAJOR 0 +#define APP_VERSION_MINOR 9 +#define APP_VERSION_BUILD 0 + +#endif diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/clientcredential.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/clientcredential.h new file mode 100644 index 0000000000..58d2ca4fa6 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/clientcredential.h @@ -0,0 +1,54 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + + +#ifndef __CLIENTCREDENTIAL__H__ +#define __CLIENTCREDENTIAL__H__ + + /* + * @brief Wi-Fi network to join. + * + * @todo If you are using Wi-Fi, set this to your network name. + */ +#define clientcredentialWIFI_SSID "" + + /* + * @brief Password needed to join Wi-Fi network. + * + * @todo If you are using WPA, set this to your network password. + */ +#define clientcredentialWIFI_PASSWORD "" + + /* + * @brief Wi-Fi network security type. + * + * @see WIFISecurity_t. + * + * @note Possible values are eWiFiSecurityOpen, eWiFiSecurityWEP, eWiFiSecurityWPA, + * eWiFiSecurityWPA2 (depending on the support of your device Wi-Fi radio). + */ +#define clientcredentialWIFI_SECURITY eWiFiSecurityWPA2 + +#endif diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/config_common.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/config_common.h new file mode 100644 index 0000000000..2b1820f52c --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/config_common.h @@ -0,0 +1,299 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +/* This file contains default configuration settings for the tests on FreeRTOS. */ + +#ifndef IOT_CONFIG_COMMON_H_ +#define IOT_CONFIG_COMMON_H_ + +/* FreeRTOS include. */ +#include "FreeRTOS.h" + +/* Credentials include. */ +#include +#include + +/* Unity framework includes. */ +#include "unity.h" + +/* Use platform types on FreeRTOS. */ +#include "platform/iot_platform_types_freertos.h" + +/* SDK version. */ +#define IOT_SDK_VERSION "4.0.0" + +/* This config file is for the tests. */ +#ifndef IOT_BUILD_TESTS + #define IOT_BUILD_TESTS ( 1 ) +#endif + +#if IOT_BUILD_TESTS != 1 + #error "IOT_BUILD_TESTS must be 1 for this test project." +#endif + +/* Unity on FreeRTOS does not provide malloc overrides. */ +#define IOT_TEST_NO_MALLOC_OVERRIDES ( 1 ) + +/* Supported network types.*/ +#define AWSIOT_NETWORK_TYPE_NONE 0x00000000 +#define AWSIOT_NETWORK_TYPE_WIFI 0x00000001 +#define AWSIOT_NETWORK_TYPE_BLE 0x00000002 + +/* Logging puts function. */ +#define IotLogging_Puts( str ) configPRINTF( ( "%s\r\n", str ) ) + +/* Enable asserts in libraries. */ +#define IOT_METRICS_ENABLE_ASSERTS ( 1 ) +#define IOT_CONTAINERS_ENABLE_ASSERTS ( 1 ) +#define IOT_TASKPOOL_ENABLE_ASSERTS ( 1 ) +#define IOT_MQTT_ENABLE_ASSERTS ( 1 ) +#define AWS_IOT_SHADOW_ENABLE_ASSERTS ( 1 ) +#define AWS_IOT_DEFENDER_ENABLE_ASSERTS ( 1 ) +#define IOT_BLE_ENABLE_ASSERTS ( 1 ) + +/* Assert functions. */ +#define IotMetrics_Assert( expression ) if( ( expression ) == 0 ) TEST_FAIL_MESSAGE( "Assertion failure" ) +#define IotContainers_Assert( expression ) if( ( expression ) == 0 ) TEST_FAIL_MESSAGE( "Assertion failure" ) +#define IotTaskPool_Assert( expression ) if( ( expression ) == 0 ) TEST_FAIL_MESSAGE( "Assertion failure" ) +#define IotMqtt_Assert( expression ) if( ( expression ) == 0 ) TEST_FAIL_MESSAGE( "Assertion failure" ) +#define AwsIotShadow_Assert( expression ) if( ( expression ) == 0 ) TEST_FAIL_MESSAGE( "Assertion failure" ) +#define AwsIotDefender_Assert( expression ) if( ( expression ) == 0 ) TEST_FAIL_MESSAGE( "Assertion failure" ) +#define IotBle_Assert( expression ) if( ( expression ) == 0 ) TEST_FAIL_MESSAGE( "Assertion failure" ) + +/* Control the usage of dynamic memory allocation. */ +#ifndef IOT_STATIC_MEMORY_ONLY + #define IOT_STATIC_MEMORY_ONLY ( 0 ) +#endif + +/* Memory allocation configuration. Note that these functions will not be affected + * by IOT_STATIC_MEMORY_ONLY. */ +#define IotNetwork_Malloc pvPortMalloc +#define IotNetwork_Free vPortFree +#define IotThreads_Malloc pvPortMalloc +#define IotThreads_Free vPortFree +#define IotLogging_Malloc pvPortMalloc +#define IotLogging_Free vPortFree +#define IotBle_Malloc pvPortMalloc +#define IotBle_Free vPortFree +/* #define IotLogging_StaticBufferSize */ +#define IotTest_Malloc pvPortMalloc +#define IotTest_Free vPortFree + + +/* Memory allocation function configuration for the MQTT library. The MQTT library + * will be affected by IOT_STATIC_MEMORY_ONLY. */ +#if IOT_STATIC_MEMORY_ONLY == 0 + #define IotMetrics_MallocTcpConnection pvPortMalloc + #define IotMetrics_FreeTcpConnection vPortFree + #define IotMetrics_MallocIpAddress pvPortMalloc + #define IotMetrics_FreeIpAddress vPortFree + + #define IotTaskPool_MallocTaskPool pvPortMalloc + #define IotTaskPool_FreeTaskPool vPortFree + #define IotTaskPool_MallocJob pvPortMalloc + #define IotTaskPool_FreeJob vPortFree + #define IotTaskPool_MallocTimerEvent pvPortMalloc + #define IotTaskPool_FreeTimerEvent vPortFree + + #define IotMqtt_MallocConnection pvPortMalloc + #define IotMqtt_FreeConnection vPortFree + #define IotMqtt_MallocMessage pvPortMalloc + #define IotMqtt_FreeMessage vPortFree + #define IotMqtt_MallocOperation pvPortMalloc + #define IotMqtt_FreeOperation vPortFree + #define IotMqtt_MallocSubscription pvPortMalloc + #define IotMqtt_FreeSubscription vPortFree + + #define IotSerializer_MallocCborEncoder pvPortMalloc + #define IotSerializer_FreeCborEncoder vPortFree + #define IotSerializer_MallocCborParser pvPortMalloc + #define IotSerializer_FreeCborParser vPortFree + #define IotSerializer_MallocCborValue pvPortMalloc + #define IotSerializer_FreeCborValue vPortFree + #define IotSerializer_MallocDecoderObject pvPortMalloc + #define IotSerializer_FreeDecoderObject vPortFree + + #define AwsIotShadow_MallocOperation pvPortMalloc + #define AwsIotShadow_FreeOperation vPortFree + #define AwsIotShadow_MallocString pvPortMalloc + #define AwsIotShadow_FreeString vPortFree + #define AwsIotShadow_MallocSubscription pvPortMalloc + #define AwsIotShadow_FreeSubscription vPortFree + + #define AwsIotDefender_MallocReport pvPortMalloc + #define AwsIotDefender_FreeReport vPortFree + #define AwsIotDefender_MallocTopic pvPortMalloc + #define AwsIotDefender_FreeTopic vPortFree +#endif /* if IOT_STATIC_MEMORY_ONLY == 0 */ + +/* Require MQTT serializer overrides for the tests. */ +#define IOT_MQTT_ENABLE_SERIALIZER_OVERRIDES ( 1 ) + +/* Platform and SDK name for AWS MQTT metrics. Only used when AWS_IOT_MQTT_ENABLE_METRICS is 1. */ +#define IOT_SDK_NAME "AmazonFreeRTOS" +#ifdef configPLATFORM_NAME + #define IOT_PLATFORM_NAME configPLATFORM_NAME +#else + #define IOT_PLATFORM_NAME "Unknown" +#endif + +/* BLE_HAL test suites header file abstraction */ +#define IOT_LINEAR_CONTAINERS "iot_linear_containers.h" +#define IOT_THREADS "platform/iot_threads.h" +#define IOT_CLOCK "platform/iot_clock.h" +#define IOT_PLATFORM_TYPES "types/iot_platform_types.h" +#define IOT_BT_HAL_MANAGER_ADAPTER_BLE "bt_hal_manager_adapter_ble.h" +#define IOT_BT_HAL_MANAGER_ADAPTER "bt_hal_manager.h" +#define IOT_BT_HAL_GATT_SERVER "bt_hal_gatt_server.h" +#define IOT_BT_HAL_GATT_TYPES "bt_hal_gatt_types.h" +#define IOT_UNITY_FIXTURE "unity_fixture.h" +#define IOT_UNITY "unity.h" +#define IOT_LOG "iot_logging_setup.h" + +/* Cloud endpoint to which the device connects to. */ +#define IOT_CLOUD_ENDPOINT clientcredentialMQTT_BROKER_ENDPOINT + +/* Certificate for the device.*/ +#define IOT_DEVICE_CERTIFICATE keyCLIENT_CERTIFICATE_PEM + +/** + * @brief Unique identifier used to recognize a device by the cloud. + * This could be SHA-256 of the device certificate. + */ +extern const char * getDeviceIdentifier( void ); +#define IOT_DEVICE_IDENTIFIER getDeviceIdentifier() + +/** + * @brief Metrics emitted by the device. + */ +extern const char * getDeviceMetrics( void ); +#define AWS_IOT_METRICS_USERNAME getDeviceMetrics() + +/** + * @brief Length of the metrics emitted by device. + */ +extern uint16_t getDeviceMetricsLength( void ); +#define AWS_IOT_METRICS_USERNAME_LENGTH getDeviceMetricsLength() + +/* Set Thing Name. */ +#define AWS_IOT_TEST_SHADOW_THING_NAME clientcredentialIOT_THING_NAME +#define AWS_IOT_TEST_DEFENDER_THING_NAME clientcredentialIOT_THING_NAME + +/* Configuration for defender demo: set format to CBOR. */ +#define AWS_IOT_DEFENDER_FORMAT AWS_IOT_DEFENDER_FORMAT_CBOR + +/* Configuration for defender demo: use long tag for readable output. Please use short tag for the real application. */ +#define AWS_IOT_DEFENDER_USE_LONG_TAG ( 1 ) + +/* Define the data type of metrics connection id as same as Socket_t in aws_secure_socket.h */ +#define IotMetricsConnectionId_t void * + +/* For compatibility with the FreeRTOS test framework, UnityPrint and similar + * must be redefined. */ +extern int snprintf( char *, + size_t, + const char *, + ... ); +#define UnityPrint( X ) configPRINTF( ( X ) ) +#define UnityPrintNumber( X ) { char number[ 12 ] = { 0 }; snprintf( number, 12, "%d", X ); configPRINTF( ( number ) ); } +#undef UNITY_PRINT_EOL +#define UNITY_PRINT_EOL() configPRINTF( ( "\r\n" ) ) + +/* Default platform thread stack size and priority. */ +#ifndef IOT_THREAD_DEFAULT_STACK_SIZE + #define IOT_THREAD_DEFAULT_STACK_SIZE 2048 +#endif +#ifndef IOT_THREAD_DEFAULT_PRIORITY + #define IOT_THREAD_DEFAULT_PRIORITY tskIDLE_PRIORITY +#endif + +/* Platform network configuration. */ +#ifndef IOT_NETWORK_RECEIVE_TASK_PRIORITY + #define IOT_NETWORK_RECEIVE_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 ) +#endif +#ifndef IOT_NETWORK_RECEIVE_TASK_STACK_SIZE + #define IOT_NETWORK_RECEIVE_TASK_STACK_SIZE IOT_THREAD_DEFAULT_STACK_SIZE +#endif + +/* Use FreeRTOS Secure Sockets network for tests. */ +#ifndef IOT_TEST_NETWORK_HEADER + #define IOT_TEST_NETWORK_HEADER "platform/iot_network_freertos.h" +#endif + +/* All tests use a secured connection. */ +#define IOT_TEST_SECURED_CONNECTION ( 1 ) + +/* Allow the network interface to be chosen by at runtime. */ +struct IotNetworkInterface; +extern const struct IotNetworkInterface * IotTestNetwork_GetNetworkInterface( void ); +#define IOT_TEST_NETWORK_INTERFACE IotTestNetwork_GetNetworkInterface() + +/* Allow the network serializer to be chosen by at runtime. */ +struct IotMqttSerializer; +extern const struct IotMqttSerializer * IotTestNetwork_GetSerializer( void ); +#define IOT_TEST_MQTT_SERIALIZER IotTestNetwork_GetSerializer() + +/* Retry the MQTT Connections in the MQTT System unit tests for all hardware + * platforms supported in FreeRTOS. + * Set this to the number of connection attempts for the MQTT tests. + * If undefined, it should default to 1. */ +#define IOT_TEST_MQTT_CONNECT_RETRY_COUNT ( 3 ) + +/* AWS IoT Service limits only allow 1 connection per MQTT client ID per second. + * Wait until 1100 ms have elapsed since the last connection. */ +#define IOT_TEST_MQTT_CONNECT_INIT_RETRY_DELAY_MS ( 1100 ) + +/* Forward declarations of network types used in the tests. */ +typedef struct IotNetworkConnection IotTestNetworkConnection_t; +typedef struct IotNetworkServerInfo IotTestNetworkServerInfo_t; +typedef struct IotNetworkCredentials IotTestNetworkCredentials_t; + +/* Define test network initializers. */ +#define IOT_TEST_NETWORK_CONNECTION_INITIALIZER IOT_NETWORK_CONNECTION_AFR_INITIALIZER +#define IOT_TEST_NETWORK_SERVER_INFO_INITIALIZER AWS_IOT_NETWORK_SERVER_INFO_AFR_INITIALIZER + +/* Define the credentials initializer based on the server port. Use ALPN if on + * 443, otherwise disable ALPN. */ +#if clientcredentialMQTT_BROKER_PORT == 443 + #define IOT_TEST_NETWORK_CREDENTIALS_INITIALIZER AWS_IOT_NETWORK_CREDENTIALS_AFR_INITIALIZER +#else + #define IOT_TEST_NETWORK_CREDENTIALS_INITIALIZER \ + { \ + .disableSni = false, \ + .pAlpnProtos = NULL, \ + .pRootCa = NULL, \ + .pClientCert = keyCLIENT_CERTIFICATE_PEM, \ + .pPrivateKey = keyCLIENT_PRIVATE_KEY_PEM, \ + .rootCaSize = 0, \ + .clientCertSize = sizeof( keyCLIENT_CERTIFICATE_PEM ), \ + .privateKeySize = sizeof( keyCLIENT_PRIVATE_KEY_PEM ) \ + } +#endif /* if clientcredentialMQTT_BROKER_PORT == 443 */ + +/* Network initialization and cleanup functions are not needed on FreeRTOS. */ +#define IotTestNetwork_Init() IOT_NETWORK_SUCCESS +#define IotTestNetwork_Cleanup() + +#endif /* ifndef IOT_CONFIG_COMMON_H_ */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_framework.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_framework.h new file mode 100644 index 0000000000..2adaeab1c9 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_framework.h @@ -0,0 +1,44 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +/** + * @file aws_test_framework.h + * @brief Header file for test framework. + */ + +#ifndef _AWS_TEST_FRAMEWORK_H_ +#define _AWS_TEST_FRAMEWORK_H_ + +void TEST_CacheResult( char cResult ); + +void TEST_SubmitResultBuffer( void ); + +void TEST_NotifyTestStart( void ); + +void TEST_NotifyTestFinished( void ); + +void TEST_SubmitResult( const char * pcResult ); + +#endif /* _AWS_TEST_FRAMEWORK_H_ */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_runner.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_runner.h new file mode 100644 index 0000000000..8271649452 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_runner.h @@ -0,0 +1,72 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +/** + * @file aws_test_runner.h + * @brief The function to be called to run all the tests. + */ + +#ifndef _AWS_TEST_RUNNER_H_ +#define _AWS_TEST_RUNNER_H_ + +/* + * @brief If set to 1, will run DQP_FR tests only. + */ +#define testrunnerTEST_FILTER 0 + + +/** + * @brief Size of shared array. + * + */ +#define testrunnerBUFFER_SIZE ( 4000 ) + +/** + * @brief Buffer used for all tests. + * + * Since tests are run in series, they can use the same memory array. + * This makes significant heap savings. + */ +extern char cBuffer[ testrunnerBUFFER_SIZE ]; + +/** + * @brief FreeRTOS heap measurement taken before tests are run. + */ +extern unsigned int xHeapBefore; + +/** + * @brief FreeRTOS heap measurement taken after all tests are run. + */ +extern unsigned int xHeapAfter; + + +/** + * @brief Runs all the tests. + */ +void TEST_RUNNER_RunTests_task( void * pvParameters ); + + + +#endif /* _AWS_TEST_RUNNER_H_ */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_tcp.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_tcp.h new file mode 100644 index 0000000000..a2247784c2 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_tcp.h @@ -0,0 +1,49 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +#ifndef TEST_TCP_H +#define TEST_TCP_H + + /* Non-Encrypted Echo Server. + * Update tcptestECHO_SERVER_ADDR# and + * tcptestECHO_PORT with IP address + * and port of unencrypted TCP echo server. */ + + /* You can find the code to setup an echo server in the Repo */ + + /* Assume ECHO server IP-address A.B.C.D And Port Z*/ +#define tcptestECHO_SERVER_ADDR0 ( 255 ) /* Replace with Your Echo Server Addr First Byte i.e. A */ +#define tcptestECHO_SERVER_ADDR1 ( 255 ) /* Replace with Your Echo Server Addr Second Byte i.e. B */ +#define tcptestECHO_SERVER_ADDR2 ( 255 ) /* Replace with Your Echo Server Addr Third Byte i.e. C */ +#define tcptestECHO_SERVER_ADDR3 ( 255 ) /* Replace with Your Echo Server Addr Fourth Byte i.e. D */ +#define tcptestECHO_PORT ( 0 ) /* Replace with Your Echo Server Port Number i.e. Z */ + +#if tcptestECHO_PORT == 0 +#error "Use Correct Port number and Correct IP address by setting tcptestECHO_SERVER_ADDR[0-3] and tcptestECHO_PORT in test_tcp.h" +#endif +/* Number of times to retry a connection if it fails. */ +#define tcptestRETRY_CONNECTION_TIMES 6 + +#endif /* ifndef TEST_TCP_H */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_tcp_config.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_tcp_config.h new file mode 100644 index 0000000000..057f107e35 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_tcp_config.h @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2018 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +#ifndef AWS_INTEGRATION_TEST_TCP_CONFIG_H +#define AWS_INTEGRATION_TEST_TCP_CONFIG_H + +/** + * @file aws_integration_test_tcp_portable.h + * @brief Port-specific variables for TCP tests. */ + + +/** + * @brief Indicates how much longer than the specified timeout is acceptable for + * RCVTIMEO tests. + * + * This value can be used to compensate for clock differences, and other + * code overhead. + */ +#define integrationtestportableTIMEOUT_OVER_TOLERANCE 1 + +/** + * @brief Indicates how much less time than the specified timeout is acceptable for + * RCVTIMEO tests. + * + * This value must be 0 unless networking is performs on a separate processor. + * If networking and tests are on different CPUs, an "under tolerance" is acceptable. + * For tests where same clock is used for networking and tests. + */ +#define integrationtestportableTIMEOUT_UNDER_TOLERANCE 0 + +/** + * @brief Indicates how long receive needs to wait for data before Timeout happens. + * + */ +#define integrationtestportableRECEIVE_TIMEOUT 2000 + +/** + * @brief Indicates how long send needs to wait before Timeout happens. + * + */ +#define integrationtestportableSEND_TIMEOUT 2000 + + + /** + * @brief Choose a desired hostname to be resolved. + * Also, select the number of IP-addresses the test should expect by modifying + * dnstestNUM_UNIQUE_IP_ADDRESSES in test_tcp.c source file. + */ +#define HostNameUNIQUE_ADDRESSES_TEST "freertos.org" + + +#endif /*AWS_INTEGRATION_TEST_TCP_CONFIG_H */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_utils.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_utils.h new file mode 100644 index 0000000000..ec76b314b2 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/test_utils.h @@ -0,0 +1,100 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +#ifndef _TEST_UTILS_H_ +#define _TEST_UTILS_H_ + +/** + * @brief Retry expression or statement with exponential backoff + * + * @param xCommand The expression or statement that should be + * retried + * @param xSuccessStatus The success status where a xCommand need not + * be retried any more + * @param ulStartingPeriodMs The initial delay period in milliseconds + * @param lRetries The number of times to retry. xCommand will + * be tried once, and then retried n times. + * + * @code + * int a = 0; + * RETRY_EXPONENTIAL( printf( "foo\n" ), 4, 150, 8 ); + * RETRY_EXPONENTIAL( a = printf( "bar\n" ), 0, 250, 8 ); + * RETRY_EXPONENTIAL( a = printf( "bar\n" ), 0, 250, 8 ); + * RETRY_EXPONENTIAL( a = connect_to_server(), CONNECTION_SUCCESS, 250, 8 ); + * RETRY_EXPONENTIAL( a++, 10, 250, 8 ); + * @endcode + * + * @return None + */ +#define RETRY_EXPONENTIAL( \ + xCommand, xSuccessStatus, ulStartingPeriodMs, lRetries ) \ + { \ + int32_t lRetried = 0; \ + uint32_t ulPeriodMs = ulStartingPeriodMs; \ + int32_t lStatus; \ + for( ; lRetried <= lRetries; lRetried++ ) { \ + if( lRetried ) { \ + configPRINTF( ( "retrying \"%s\", %d of %d, in %d ms\n", \ + # xCommand, lRetried, \ + lRetries, ulPeriodMs ) ); \ + vTaskDelay( pdMS_TO_TICKS( ulPeriodMs ) ); \ + ulPeriodMs *= 2; \ + } \ + lStatus = xCommand; \ + if( xSuccessStatus == lStatus ) { \ + break; \ + } \ + configPRINTF( ( "expected %d, got %d\n", \ + xSuccessStatus, lStatus ) ); \ + } \ + } + +/** + * @brief Returns the file name at the end of a windows path + * + * @param full_path The full path + * + * @return file name + */ +#define WIN_FILENAME( full_path ) \ + ( strrchr( full_path, '\\' ) ? strrchr( full_path, '\\' ) + 1 : full_path ) + +/** + * @brief Returns the file name at the end of a linux path + * + * @param full_path The full path + * + * @return file name + */ +#define NIX_FILENAME( full_path ) \ + ( strrchr( full_path, '/' ) ? strrchr( full_path, '/' ) + 1 : full_path ) + +/** + * The name of the current file, stripped of the path + */ +#define __FILENAME__ WIN_FILENAME( NIX_FILENAME( __FILE__ ) ) + + +#endif /* end of include guard: _AWS_TEST_UTILS_H_ */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/unity_config.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/unity_config.h new file mode 100644 index 0000000000..1c83e54e35 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/include/unity_config.h @@ -0,0 +1,280 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +/* Unity Configuration + * As of May 11th, 2016 at ThrowTheSwitch/Unity commit 837c529 + * Update: December 29th, 2016 + * See Also: Unity/docs/UnityConfigurationGuide.pdf + * + * Unity is designed to run on almost anything that is targeted by a C compiler. + * It would be awesome if this could be done with zero configuration. While + * there are some targets that come close to this dream, it is sadly not + * universal. It is likely that you are going to need at least a couple of the + * configuration options described in this document. + * + * All of Unity's configuration options are `#defines`. Most of these are simple + * definitions. A couple are macros with arguments. They live inside the + * unity_internals.h header file. We don't necessarily recommend opening that + * file unless you really need to. That file is proof that a cross-platform + * library is challenging to build. From a more positive perspective, it is also + * proof that a great deal of complexity can be centralized primarily to one + * place in order to provide a more consistent and simple experience elsewhere. + * + * Using These Options + * It doesn't matter if you're using a target-specific compiler and a simulator + * or a native compiler. In either case, you've got a couple choices for + * configuring these options: + * + * 1. Because these options are specified via C defines, you can pass most of + * these options to your compiler through command line compiler flags. Even + * if you're using an embedded target that forces you to use their + * overbearing IDE for all configuration, there will be a place somewhere in + * your project to configure defines for your compiler. + * 2. You can create a custom `unity_config.h` configuration file (present in + * your toolchain's search paths). In this file, you will list definitions + * and macros specific to your target. All you must do is define + * `UNITY_INCLUDE_CONFIG_H` and Unity will rely on `unity_config.h` for any + * further definitions it may need. + */ + +#ifndef AWS_UNITY_CONFIG_H +#define AWS_UNITY_CONFIG_H + +/* ************************* AUTOMATIC INTEGER TYPES *************************** + * C's concept of an integer varies from target to target. The C Standard has + * rules about the `int` matching the register size of the target + * microprocessor. It has rules about the `int` and how its size relates to + * other integer types. An `int` on one target might be 16 bits while on another + * target it might be 64. There are more specific types in compilers compliant + * with C99 or later, but that's certainly not every compiler you are likely to + * encounter. Therefore, Unity has a number of features for helping to adjust + * itself to match your required integer sizes. It starts off by trying to do it + * automatically. + **************************************************************************** */ + +/* The first attempt to guess your types is to check `limits.h`. Some compilers + * that don't support `stdint.h` could include `limits.h`. If you don't + * want Unity to check this file, define this to make it skip the inclusion. + * Unity looks at UINT_MAX & ULONG_MAX, which were available since C89. + */ +/* #define UNITY_EXCLUDE_LIMITS_H */ + +/* The second thing that Unity does to guess your types is check `stdint.h`. + * This file defines `UINTPTR_MAX`, since C99, that Unity can make use of to + * learn about your system. It's possible you don't want it to do this or it's + * possible that your system doesn't support `stdint.h`. If that's the case, + * you're going to want to define this. That way, Unity will know to skip the + * inclusion of this file and you won't be left with a compiler error. + */ +/* #define UNITY_EXCLUDE_STDINT_H */ + +/* ********************** MANUAL INTEGER TYPE DEFINITION *********************** + * If you've disabled all of the automatic options above, you're going to have + * to do the configuration yourself. There are just a handful of defines that + * you are going to specify if you don't like the defaults. + **************************************************************************** */ + +/* Define this to be the number of bits an `int` takes up on your system. The + * default, if not auto-detected, is 32 bits. + * + * Example: + */ +/* #define UNITY_INT_WIDTH 16 */ + +/* Define this to be the number of bits a `long` takes up on your system. The + * default, if not autodetected, is 32 bits. This is used to figure out what + * kind of 64-bit support your system can handle. Does it need to specify a + * `long` or a `long long` to get a 64-bit value. On 16-bit systems, this option + * is going to be ignored. + * + * Example: + */ +/* #define UNITY_LONG_WIDTH 16 */ + +/* Define this to be the number of bits a pointer takes up on your system. The + * default, if not autodetected, is 32-bits. If you're getting ugly compiler + * warnings about casting from pointers, this is the one to look at. + * + * Example: + */ +/* #define UNITY_POINTER_WIDTH 64 */ + +/* Unity will automatically include 64-bit support if it auto-detects it, or if + * your `int`, `long`, or pointer widths are greater than 32-bits. Define this + * to enable 64-bit support if none of the other options already did it for you. + * There can be a significant size and speed impact to enabling 64-bit support + * on small targets, so don't define it if you don't need it. + */ +/* #define UNITY_INCLUDE_64 */ + + +/* *************************** FLOATING POINT TYPES **************************** + * In the embedded world, it's not uncommon for targets to have no support for + * floating point operations at all or to have support that is limited to only + * single precision. We are able to guess integer sizes on the fly because + * integers are always available in at least one size. Floating point, on the + * other hand, is sometimes not available at all. Trying to include `float.h` on + * these platforms would result in an error. This leaves manual configuration as + * the only option. + **************************************************************************** */ + +/* By default, Unity guesses that you will want single precision floating point + * support, but not double precision. It's easy to change either of these using + * the include and exclude options here. You may include neither, just float, + * or both, as suits your needs. + */ +/* #define UNITY_EXCLUDE_FLOAT */ +/* #define UNITY_INCLUDE_DOUBLE */ +/* #define UNITY_EXCLUDE_DOUBLE */ + +/* For features that are enabled, the following floating point options also + * become available. + */ + +/* Unity aims for as small of a footprint as possible and avoids most standard + * library calls (some embedded platforms don't have a standard library!). + * Because of this, its routines for printing integer values are minimalist and + * hand-coded. To keep Unity universal, though, we eventually chose to develop + * our own floating point print routines. Still, the display of floating point + * values during a failure are optional. By default, Unity will print the + * actual results of floating point assertion failures. So a failed assertion + * will produce a message like "Expected 4.0 Was 4.25". If you would like less + * verbose failure messages for floating point assertions, use this option to + * give a failure message `"Values Not Within Delta"` and trim the binary size. + */ +/* #define UNITY_EXCLUDE_FLOAT_PRINT */ + +/* If enabled, Unity assumes you want your `FLOAT` asserts to compare standard C + * floats. If your compiler supports a specialty floating point type, you can + * always override this behavior by using this definition. + * + * Example: + */ +/* #define UNITY_FLOAT_TYPE float16_t */ + +/* If enabled, Unity assumes you want your `DOUBLE` asserts to compare standard + * C doubles. If you would like to change this, you can specify something else + * by using this option. For example, defining `UNITY_DOUBLE_TYPE` to `long + * double` could enable gargantuan floating point types on your 64-bit processor + * instead of the standard `double`. + * + * Example: + */ +/* #define UNITY_DOUBLE_TYPE long double */ + +/* If you look up `UNITY_ASSERT_EQUAL_FLOAT` and `UNITY_ASSERT_EQUAL_DOUBLE` as + * documented in the Unity Assertion Guide, you will learn that they are not + * really asserting that two values are equal but rather that two values are + * "close enough" to equal. "Close enough" is controlled by these precision + * configuration options. If you are working with 32-bit floats and/or 64-bit + * doubles (the normal on most processors), you should have no need to change + * these options. They are both set to give you approximately 1 significant bit + * in either direction. The float precision is 0.00001 while the double is + * 10^-12. For further details on how this works, see the appendix of the Unity + * Assertion Guide. + * + * Example: + */ +/* #define UNITY_FLOAT_PRECISION 0.001f */ +/* #define UNITY_DOUBLE_PRECISION 0.001f */ + + +/* *************************** TOOLSET CUSTOMIZATION *************************** + * In addition to the options listed above, there are a number of other options + * which will come in handy to customize Unity's behavior for your specific + * toolchain. It is possible that you may not need to touch any of these but + * certain platforms, particularly those running in simulators, may need to jump + * through extra hoops to operate properly. These macros will help in those + * situations. + **************************************************************************** */ + +/* By default, Unity prints its results to `stdout` as it runs. This works + * perfectly fine in most situations where you are using a native compiler for + * testing. It works on some simulators as well so long as they have `stdout` + * routed back to the command line. There are times, however, where the + * simulator will lack support for dumping results or you will want to route + * results elsewhere for other reasons. In these cases, you should define the + * `UNITY_OUTPUT_CHAR` macro. This macro accepts a single character at a time + * (as an `int`, since this is the parameter type of the standard C `putchar` + * function most commonly used). You may replace this with whatever function + * call you like. + * + * Example: + * Say you are forced to run your test suite on an embedded processor with no + * `stdout` option. You decide to route your test result output to a custom + * serial `RS232_putc()` function you wrote like thus: + */ +/* #define UNITY_OUTPUT_CHAR(a) RS232_putc(a) */ +/* #define UNITY_OUTPUT_CHAR_HEADER_DECLARATION RS232_putc(int) */ +/* #define UNITY_OUTPUT_FLUSH() RS232_flush() */ +/* #define UNITY_OUTPUT_FLUSH_HEADER_DECLARATION RS232_flush(void) */ +/* #define UNITY_OUTPUT_START() RS232_config(115200,1,8,0) */ +/* #define UNITY_OUTPUT_COMPLETE() RS232_close() */ + +/* For some targets, Unity can make the otherwise required `setUp()` and + * `tearDown()` functions optional. This is a nice convenience for test writers + * since `setUp` and `tearDown` don't often actually _do_ anything. If you're + * using gcc or clang, this option is automatically defined for you. Other + * compilers can also support this behavior, if they support a C feature called + * weak functions. A weak function is a function that is compiled into your + * executable _unless_ a non-weak version of the same function is defined + * elsewhere. If a non-weak version is found, the weak version is ignored as if + * it never existed. If your compiler supports this feature, you can let Unity + * know by defining `UNITY_SUPPORT_WEAK` as the function attributes that would + * need to be applied to identify a function as weak. If your compiler lacks + * support for weak functions, you will always need to define `setUp` and + * `tearDown` functions (though they can be and often will be just empty). The + * most common options for this feature are: + */ +/* #define UNITY_SUPPORT_WEAK weak */ +/* #define UNITY_SUPPORT_WEAK __attribute__((weak)) */ +/* #define UNITY_NO_WEAK */ + +/* Some compilers require a custom attribute to be assigned to pointers, like + * `near` or `far`. In these cases, you can give Unity a safe default for these + * by defining this option with the attribute you would like. + * + * Example: + */ +/* #define UNITY_PTR_ATTRIBUTE __attribute__((far)) */ +/* #define UNITY_PTR_ATTRIBUTE near */ + +#include "aws_test_framework.h" + +/* Redirect output to print task. */ +#ifndef UNITY_OUTPUT_CHAR + #define UNITY_OUTPUT_CHAR( a ) TEST_CacheResult( a ) +#endif +#ifndef UNITY_OUTPUT_FLUSH + #define UNITY_OUTPUT_FLUSH() TEST_SubmitResultBuffer() +#endif +#ifndef UNITY_OUTPUT_START + #define UNITY_OUTPUT_START() TEST_NotifyTestStart() +#endif +#ifndef UNITY_OUTPUT_COMPLETE + #define UNITY_OUTPUT_COMPLETE() TEST_NotifyTestFinished() +#endif + +#endif /* AWS_UNITY_CONFIG_H */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test.c b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test.c new file mode 100644 index 0000000000..6bef263d2e --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test.c @@ -0,0 +1,92 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +/** + * @file iot_demo.c + * @brief Demo + */ + +#include "FreeRTOS.h" + + +/*-----------------------------------------------------------*/ + +/* configUSE_STATIC_ALLOCATION is set to 1, so the application must provide an + * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is + * used by the Idle task. */ +void vApplicationGetIdleTaskMemory( StaticTask_t ** ppxIdleTaskTCBBuffer, + StackType_t ** ppxIdleTaskStackBuffer, + uint32_t * pulIdleTaskStackSize ) +{ + /* If the buffers to be provided to the Idle task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xIdleTaskTCB; + static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Idle + * task's state will be stored. */ + *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; + + /* Pass out the array that will be used as the Idle task's stack. */ + *ppxIdleTaskStackBuffer = uxIdleTaskStack; + + /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. + * Note that, as the array is necessarily of type StackType_t, + * configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; +} +/*-----------------------------------------------------------*/ + +/** + * @brief This is to provide the memory that is used by the RTOS daemon/time task. + * + * If configUSE_STATIC_ALLOCATION is set to 1, so the application must provide an + * implementation of vApplicationGetTimerTaskMemory() to provide the memory that is + * used by the RTOS daemon/time task. + */ +void vApplicationGetTimerTaskMemory( StaticTask_t ** ppxTimerTaskTCBBuffer, + StackType_t ** ppxTimerTaskStackBuffer, + uint32_t * pulTimerTaskStackSize ) +{ + /* If the buffers to be provided to the Timer task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xTimerTaskTCB; + static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; + + /* Pass out a pointer to the StaticTask_t structure in which the Idle + * task's state will be stored. */ + *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; + + /* Pass out the array that will be used as the Timer task's stack. */ + *ppxTimerTaskStackBuffer = uxTimerTaskStack; + + /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. + * Note that, as the array is necessarily of type StackType_t, + * configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; +} +/*-----------------------------------------------------------*/ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test_framework.c b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test_framework.c new file mode 100644 index 0000000000..12e749fd1e --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test_framework.c @@ -0,0 +1,97 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +/* Standard includes. */ +#include +#include + +/* FreeRTOS includes. */ +#include "FreeRTOS.h" +#include "task.h" + +/* Test framework include */ +#include "test_framework.h" + +/* Unity include */ +#include "unity.h" + +#define TEST_RESULT_BUFFER_CAPACITY 1024 + +/*-----------------------------------------------------------*/ + +/* The buffer to store test result. The content will be printed if an eol character + * is received */ +static char pcTestResultBuffer[ TEST_RESULT_BUFFER_CAPACITY ]; +static int16_t xBufferSize = 0; + +/*-----------------------------------------------------------*/ + +void TEST_CacheResult( char cResult ) +{ + if( TEST_RESULT_BUFFER_CAPACITY - xBufferSize == 2 ) + { + cResult = '\n'; + } + + pcTestResultBuffer[ xBufferSize++ ] = cResult; + + if( ( '\n' == cResult ) ) + { + TEST_SubmitResultBuffer(); + } +} +/*-----------------------------------------------------------*/ + +void TEST_SubmitResultBuffer() +{ + if( 0 != xBufferSize ) + { + TEST_SubmitResult( pcTestResultBuffer ); + memset( pcTestResultBuffer, 0, TEST_RESULT_BUFFER_CAPACITY ); + xBufferSize = 0; + } +} +/*-----------------------------------------------------------*/ + +void TEST_NotifyTestStart() +{ + TEST_SubmitResult( "---------STARTING TESTS---------\n" ); +} +/*-----------------------------------------------------------*/ + +void TEST_NotifyTestFinished() +{ + TEST_SubmitResult( "-------ALL TESTS FINISHED-------\n" ); +} +/*-----------------------------------------------------------*/ + +void TEST_SubmitResult( const char * pcResult ) +{ + /* We want to print test result no matter configPRINTF is defined or not */ + vLoggingPrintf( pcResult ); + + /* Wait for 0.1 seconds to let print task empty its buffer. */ + vTaskDelay( pdMS_TO_TICKS( 100UL ) ); +} diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test_freertos.c b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test_freertos.c new file mode 100644 index 0000000000..27a33b0421 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test_freertos.c @@ -0,0 +1,87 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +/** + * @file iot_test_freertos.c + * @brief Common hooks file for platforms that have not implemented hooks. + */ + +#include "FreeRTOS.h" +#include "task.h" + +/* It is recommended to implement hooks that use platform specific APIs. This allows + * for better error messages and recovery. Should platform specific hooks be implemented, + * add this macro to iot_config.h to avoid compiling these symbols.*/ +#ifndef iotconfigUSE_PORT_SPECIFIC_HOOKS + +/** + * @brief Warn user if pvPortMalloc fails. + * + * Called if a call to pvPortMalloc() fails because there is insufficient + * free memory available in the FreeRTOS heap. pvPortMalloc() is called + * internally by FreeRTOS API functions that create tasks, queues, software + * timers, and semaphores. The size of the FreeRTOS heap is set by the + * configTOTAL_HEAP_SIZE configuration constant in FreeRTOSConfig.h. + * + */ + void vApplicationMallocFailedHook() + { + configPRINT_STRING( ( "ERROR: Malloc failed to allocate memory\r\n" ) ); + taskDISABLE_INTERRUPTS(); + + /* Loop forever */ + for( ; ; ) + { + } + } +/*-----------------------------------------------------------*/ + +/** + * @brief Loop forever if stack overflow is detected. + * + * If configCHECK_FOR_STACK_OVERFLOW is set to 1, + * this hook provides a location for applications to + * define a response to a stack overflow. + * + * Use this hook to help identify that a stack overflow + * has occurred. + * + */ + void vApplicationStackOverflowHook( TaskHandle_t xTask, + char * pcTaskName ) + { + /* Disable unused parameter warnings. */ + ( void ) xTask; + ( void ) pcTaskName; + + configPRINT_STRING( ( "ERROR: stack overflow with task \r\n" ) ); + portDISABLE_INTERRUPTS(); + + /* Loop forever */ + for( ; ; ) + { + } + } +#endif /* iotconfigUSE_PORT_SPECIFIC_HOOKS */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test_tcp.c b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test_tcp.c new file mode 100644 index 0000000000..149364d896 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Cases/test_tcp.c @@ -0,0 +1,2560 @@ +/* + * FreeRTOS Secure Sockets V1.1.9 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +/* Standard includes. */ +#include +#include +#include +#include + +/* FreeRTOS includes. */ +#include "FreeRTOS.h" +#include "task.h" +#include "queue.h" +#include "event_groups.h" + +/* Test framework includes. */ +#include "unity_fixture.h" +#include "test_runner.h" +#include "test_utils.h" +#include "test_tcp.h" + +#include "FreeRTOS_Sockets.h" +#include "FreeRTOS_IP.h" + +/* Update this file with port-specific values. */ +#include "test_tcp_config.h" + +/* Update this file with AWS Crredentials. */ +#include "clientcredential.h" + +/* Verbose printing. */ +#define tcptestPRINTF( x ) +/* In case of test failures, FAILUREPRINTF may provide more detailed information. */ +#define tcptestFAILUREPRINTF( x ) vLoggingPrintf x +/* Fail the test on tcptestASSERT. */ +#define tcptestASSERT( x ) configASSERT( x ) +/* Take measurements of the FreeRTOS heap before and after every test. */ +#define tcptestMEMORYWATCH 0 + +/* Connection type. Add additional test servers here. */ +typedef enum +{ + eSecure, /* Secure test server. Uses tcptestECHO_SERVER_TLS. */ + eNonsecure, /* Non secure test server. Uses tcptestECHO_SERVER. */ + eAwsBroker /* AWS IoT Broker. Uses clientcredential. */ +} Server_t; + +/* The echo tasks create a socket, send out a number of echo requests, listen + * for the echo reply, then close the socket again before starting over. This + * delay is used between each iteration to ensure the network does not get too + * congested. */ +#define tcptestLOOP_DELAY_MS ( 150 ) +#define tcptestLOOP_DELAY ( ( TickType_t ) tcptestLOOP_DELAY_MS / portTICK_PERIOD_MS ) + +/* The number of times FreeRTOS_connect_TCP opens and closes a socket. */ +/* Need to test at least 20 times. So bugs were not discovered with only 10 loops. */ +#define tcptestCONNECT_AND_CLOSE_LOOP ( 20 ) + +/* Filler values in the RX and TX buffers used to check for undesirable + * buffer modification. */ +#define tcptestRX_BUFFER_FILLER 0xFF +#define tcptestTX_BUFFER_FILLER 0xAA + +/* Size of pcTxBuffer and pcRxBuffer. */ +#define tcptestBUFFER_SIZE ( testrunnerBUFFER_SIZE / 2 ) + +/* Global buffers are shared between tests to reduce RAM usage. */ +char * pcTxBuffer = &cBuffer[ 0 ]; +char * pcRxBuffer = &cBuffer[ tcptestBUFFER_SIZE ]; + +/* Default Rx and Tx time outs are used to ensure the sockets do not + * wait too long for missing data. */ +static const TickType_t xReceiveTimeOut = pdMS_TO_TICKS( integrationtestportableRECEIVE_TIMEOUT ); +static const TickType_t xSendTimeOut = pdMS_TO_TICKS( integrationtestportableSEND_TIMEOUT ); + +/* Primary socket, declared globally so that it can be closed in test tear down + * in the event that a test exits/fails before socket is closed. */ +volatile Socket_t xSocket = FREERTOS_INVALID_SOCKET; +volatile BaseType_t xSocketOpen = pdFALSE; + +/* + * Uses a socket to send more than MSS bytes in one go to the standard echo + * port number 7. The echoed data is received on the same socket but in a + * different task (see prvEchoClientRxTask() below). + */ +static void prvEchoClientTxTask( void * pvParameters ); + +/* TCP Echo Client tasks multi-task test parameters. These can be configured in aws_test_tcp_config.h. */ +#ifndef tcptestTCP_ECHO_TASKS_STACK_SIZE + #define tcptestTCP_ECHO_TASKS_STACK_SIZE ( configMINIMAL_STACK_SIZE * 4 ) +#endif +#ifndef tcptestTCP_ECHO_TASKS_PRIORITY + #define tcptestTCP_ECHO_TASKS_PRIORITY ( tskIDLE_PRIORITY ) +#endif + +/* The queue used by prvEchoClientTxTask() to send the next socket to use to + * prvEchoClientRxTask(). */ +static volatile QueueHandle_t xSocketPassingQueue = NULL; + +/* The event group used by the prvEchoClientTxTask() and prvEchoClientRxTask() + * to synchronize prior to commencing a cycle using a new socket. */ +static volatile EventGroupHandle_t xSyncEventGroup = NULL; + + +/* Bit definitions used with the xSyncEventGroup event group to allow the + * prvEchoClientTxTask() and prvEchoClientRxTask() tasks to synchronize before + * commencing a new cycle with a different socket. */ +#define tcptestTX_TASK_BIT ( 0x01 << 1 ) +#define tcptestRX_TASK_BIT ( 0x01 << 2 ) + + +/* Array setup for 2x an Ethernet II data section */ +#define tcptestTWICE_MAX_FRAME_SIZE ( 2 * 1500 ) +/* Array is defined as const so it can be located in flash. */ +static const char cTransmittedString[ tcptestTWICE_MAX_FRAME_SIZE ] = +{ + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, + 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, + 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, + 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, + 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, + 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, + 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, + 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, + 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, + 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, + 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, + 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, + 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, + 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, + 252, 253, 254, 255, 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, + 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, + 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, + 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, + 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, + 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, + 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, + 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, + 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, + 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, + 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, + 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, + 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, + 248, 249, 250, 251, 252, 253, 254, 255, 0, 1, 2, 3, + 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, + 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, + 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, + 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, + 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, + 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, + 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, + 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, + 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, + 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, + 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, + 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, + 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, + 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, + 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, + 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, + 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, + 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, + 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, + 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, + 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, + 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, + 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, + 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, + 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, + 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, + 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, + 252, 253, 254, 255, 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, + 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, + 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, + 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, + 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, + 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, + 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, + 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, + 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, + 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, + 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, + 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, + 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, + 248, 249, 250, 251, 252, 253, 254, 255, 0, 1, 2, 3, + 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, + 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, + 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, + 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, + 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, + 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, + 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, + 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, + 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, + 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, + 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, + + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, + 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, + 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, + 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, + 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, + 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, + 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, + 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, + 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, + 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, + 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, + 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, + 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, + 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, + 252, 253, 254, 255, 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, + 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, + 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, + 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, + 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, + 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, + 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, + 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, + 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, + 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, + 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, + 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, + 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, + 248, 249, 250, 251, 252, 253, 254, 255, 0, 1, 2, 3, + 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, + 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, + 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, + 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, + 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, + 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, + 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, + 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, + 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, + 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, + 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, + 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, + 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, + 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, + 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, + 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, + 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, + 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, + 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, + 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, + 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, + 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, + 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, + 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, + 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, + 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, + 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, + 252, 253, 254, 255, 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, + 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, + 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, + 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, + 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, + 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, + 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, + 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, + 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, + 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, + 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, + 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, + 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, + 248, 249, 250, 251, 252, 253, 254, 255, 0, 1, 2, 3, + 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, + 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, + 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, + 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, + 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, + 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, + 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, + 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, + 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, + 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, + 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219 +}; + +#ifndef tcptestECHO_TEST_SYNC_TIMEOUT + #define tcptestECHO_TEST_SYNC_TIMEOUT 80000 +#endif + +#ifndef tcptestECHO_TEST_RXTX_TIMEOUT + #define tcptestECHO_TEST_RXTX_TIMEOUT 5000 +#endif +#define tcptestECHO_CLIENT_EVENT_MASK ( ( 1 << tcptestNUM_ECHO_CLIENTS ) - 1 ) + +#define tcptestECHO_TEST_SYNC_TIMEOUT_TICKS ( pdMS_TO_TICKS( tcptestECHO_TEST_SYNC_TIMEOUT ) ) +static const TickType_t xEchoTestRxTxTimeOut = pdMS_TO_TICKS( tcptestECHO_TEST_RXTX_TIMEOUT ); + +/* All the modes for the test SOCKETS_Echo_Client_Separate_Tasks */ +typedef enum +{ + LARGE_BUFFER_HIGH_PRIORITY, + SMALL_BUFFER_HIGH_PRIORITY, + LARGE_BUFFER_LOW_PRIORITY, + SMALL_BUFFER_LOW_PRIORITY, + tcptestMAX_ECHO_TEST_MODES +} tcptestEchoTestModes_t; + +typedef struct +{ + uint16_t usTaskTag; + BaseType_t xResult; + TaskHandle_t xTaskHandle; +} tcptestEchoClientsTaskParams_t; + +/* Number of time the test goes through all the modes. */ +#define tcptestMAX_LOOPS_ECHO_TEST tcptestMAX_ECHO_TEST_MODES + +#define tcptestECHO_TEST_LOW_PRIORITY tskIDLE_PRIORITY +#define tcptestECHO_TEST_HIGH_PRIORITY ( configMAX_PRIORITIES - 1 ) + +#ifndef ipconfigTCP_MSS + #define ipconfigTCP_MSS ( 256 ) +#endif +#define tcptestNUM_ECHO_CLIENTS ( 2 ) +#define tcptestMAX_LOOPS_ECHO_CLIENTS_LOOP ( 10 ) + +#define dnstestNUM_UNIQUE_IP_ADDRESSES ( 3 ) + +static void prvThreadSafeDifferentSocketsDifferentTasks( void * pvParameters ); +/****************** Unity Test Code *********************************/ +size_t xHeapB; +size_t xHeapA; +/* Group declaration required by Unity framework. */ +TEST_GROUP( Full_TCP ); + +/* Setup required by Unity framework. */ +TEST_SETUP( Full_TCP ) +{ + #if ( tcptestMEMORYWATCH == 1 ) + /* Give the print buffer time to empty */ + vTaskDelay( 500 ); + xHeapB = xPortGetFreeHeapSize(); + #endif +} + +/* Tear down required by Unity framework. + * Closes the global socket if it was left open by the test. */ +TEST_TEAR_DOWN( Full_TCP ) +{ + int32_t lReturn; + + if( TEST_PROTECT() ) + { + if( xSocketOpen == pdTRUE ) + { + lReturn = FreeRTOS_closesocket( xSocket ); + xSocketOpen = pdFALSE; + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, lReturn, "SOCKETS_Close failed in tear down. \r\n" ); + } + } + + #if ( tcptestMEMORYWATCH == 1 ) + /* Give the print buffer time to empty */ + vTaskDelay( 500 ); + xHeapA = xPortGetFreeHeapSize(); + + configPRINTF( ( "Heap before: %d, Heap After: %d \r\n", xHeapB, xHeapA ) ); + #endif +} + + +/*-----------------------------------------------------------*/ +static void prvCreateTxData( char * cBuffer, + size_t xMessageLength, + uint32_t ulTxCount ); +static BaseType_t prvCheckRxTxBuffers( uint8_t * pucTxBuffer, + uint8_t * pucRxBuffer, + size_t xMessageLength ); + +/*-----------------------------------------------------------*/ + +/* Creates a TCP Socket. + * Causes a test failure if socket creation fails. */ +static Socket_t prvTcpSocketHelper( volatile BaseType_t * pxSocketOpen ) +{ + Socket_t xSocketLocal; + + /* Make socket. */ + xSocketLocal = FreeRTOS_socket( FREERTOS_AF_INET, + FREERTOS_SOCK_STREAM, + FREERTOS_IPPROTO_TCP ); + + if( xSocketLocal != FREERTOS_INVALID_SOCKET ) + { + /* Test variable for closing exits/fails before closing. */ + *pxSocketOpen = pdTRUE; + } + + return xSocketLocal; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvNonSecureConnectHelper( Socket_t xSocketLocal, + struct freertos_sockaddr* pxHostAddress ) +{ + /* Disable unused parameter warning. */ + ( void ) xSocketLocal; + + /* Echo requests are sent to the echo server. The echo server is + * listening to tcptestECHO_PORT on this computer's IP address. */ + pxHostAddress->sin_addr = FreeRTOS_inet_addr_quick( tcptestECHO_SERVER_ADDR0, + tcptestECHO_SERVER_ADDR1, + tcptestECHO_SERVER_ADDR2, + tcptestECHO_SERVER_ADDR3 ); + pxHostAddress->sin_port = FreeRTOS_htons( tcptestECHO_PORT ); + pxHostAddress->sin_len = sizeof( struct freertos_sockaddr ); + pxHostAddress->sin_family = FREERTOS_AF_INET; + + return pdFREERTOS_ERRNO_NONE; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvConnect( Socket_t xSocketLocal) +{ + BaseType_t xResult = pdFAIL; + struct freertos_sockaddr xAddress; + + xResult = prvNonSecureConnectHelper( xSocketLocal, &xAddress ); + + if( xResult == pdFREERTOS_ERRNO_NONE ) + { + xResult = FreeRTOS_connect( xSocketLocal, + &xAddress, + sizeof( xAddress ) ); + } + else + { + tcptestFAILUREPRINTF( ("%s: Non Secure connect helper failed", __FUNCTION__) ); + } + + return xResult; +} +/*-----------------------------------------------------------*/ + +static BaseType_t prvConnectHelper( Socket_t xSocketLocal) +{ + BaseType_t xResult = pdFAIL; + uint32_t ulInitialRetryPeriodMs = tcptestLOOP_DELAY_MS; + BaseType_t xMaxRetries = tcptestRETRY_CONNECTION_TIMES; + + RETRY_EXPONENTIAL( xResult = prvConnect( xSocketLocal), + pdFREERTOS_ERRNO_NONE, + ulInitialRetryPeriodMs, + xMaxRetries ); + + return xResult; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvSetSockOptHelper( Socket_t xSocketLocal, + TickType_t xRxTimeOut, + TickType_t xTxTimeOut ) +{ + BaseType_t xResult; + + /* Set a time out so a missing reply does not cause the task to block + * indefinitely. */ + xResult = FreeRTOS_setsockopt( xSocketLocal, + 0, + FREERTOS_SO_RCVTIMEO, + &xRxTimeOut, + sizeof( xRxTimeOut ) ); + + if( xResult == pdFREERTOS_ERRNO_NONE ) + { + xResult = FreeRTOS_setsockopt( xSocketLocal, + 0, + FREERTOS_SO_SNDTIMEO, + &xTxTimeOut, + sizeof( xTxTimeOut ) ); + + if( xResult != pdFREERTOS_ERRNO_NONE ) + { + tcptestFAILUREPRINTF( ( "%s: Socket set sock opt send timeout failed \r\n", __FUNCTION__ ) ); + } + } + else + { + tcptestFAILUREPRINTF( ( "%s: Socket set sock opt receive timeout failed \r\n", __FUNCTION__ ) ); + } + + return xResult; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvConnectHelperWithRetry( volatile Socket_t * pxSocket, + TickType_t xRxTimeOut, + TickType_t xTxTimeOut, + volatile BaseType_t * pxSocketIsAllocated ) +{ + BaseType_t xIsConnected = pdFALSE; + BaseType_t xResult = pdFREERTOS_ERRNO_NONE; + BaseType_t xRetry = 0; + struct freertos_sockaddr xEchoServerAddress; + TickType_t xRetryTimeoutTicks = tcptestLOOP_DELAY; + + do + { + /* Create the socket. */ + *pxSocket = prvTcpSocketHelper( pxSocketIsAllocated ); + + if( FREERTOS_INVALID_SOCKET == *pxSocket ) + { + xResult = FREERTOS_SOCKET_ERROR; + tcptestFAILUREPRINTF( ( "Failed to allocate Socket Descriptor \r\n" ) ); + break; + } + + /* Set the appropriate socket options for the destination. */ + if( pdFREERTOS_ERRNO_NONE == xResult ) + { + xResult = prvNonSecureConnectHelper( *pxSocket, &xEchoServerAddress ); + } + + /* Set socket timeout options. */ + if( pdFREERTOS_ERRNO_NONE == xResult ) + { + xResult = prvSetSockOptHelper( *pxSocket, xRxTimeOut, xTxTimeOut ); + } + + /* Attempt, with possible retries, to connect to the destination. */ + if( pdFREERTOS_ERRNO_NONE == xResult ) + { + xResult = FreeRTOS_connect( *pxSocket, + &xEchoServerAddress, + sizeof( xEchoServerAddress ) ); + + if( pdFREERTOS_ERRNO_NONE == xResult ) + { + xIsConnected = pdTRUE; + } + else + { + if( xRetry < tcptestRETRY_CONNECTION_TIMES ) + { + FreeRTOS_closesocket( *pxSocket ); + *pxSocket = FREERTOS_INVALID_SOCKET; + xResult = pdFREERTOS_ERRNO_NONE; + xRetry++; + vTaskDelay( xRetryTimeoutTicks ); + /* Exponentially backoff the retry times */ + xRetryTimeoutTicks *= 2; /*Arbitrarily chose 2*/ + } + else + { + /* Too many failures. Give up. */ + break; + } + } + } + } + while( pdFALSE == xIsConnected ); + + return xResult; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvSendHelper( Socket_t xSocketLocal, + uint8_t * pucTxBuffer, + size_t xLength ) +{ + BaseType_t xNumBytesSentTotal; + BaseType_t xNumBytes; + BaseType_t xResult; + + xResult = pdPASS; + xNumBytesSentTotal = 0; + + while( ( size_t ) xNumBytesSentTotal < xLength ) + { + xNumBytes = FreeRTOS_send( xSocketLocal, /* The socket being sent to. */ + &pucTxBuffer[ xNumBytesSentTotal ], /* The data being sent. */ + xLength - xNumBytesSentTotal, /* The length of the data being sent. */ + 0 ); /* No flags. */ + + if( xNumBytes <= 0 ) + { + xResult = pdFAIL; + tcptestFAILUREPRINTF( ( "Error in FreeRTOS_send. Return value: %d \r\n", xNumBytes ) ); + break; + } + + xNumBytesSentTotal += xNumBytes; + } + + if( ( size_t ) xNumBytesSentTotal != xLength ) + { + xResult = pdFAIL; + } + + return xResult; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvRecvHelper( Socket_t xSocketLocal, + uint8_t * pucRxBuffer, + size_t xLength ) +{ + BaseType_t xNumBytesRecvTotal; + BaseType_t xNumBytes; + BaseType_t xResult; + + xResult = pdPASS; + xNumBytesRecvTotal = 0; + + while( ( size_t ) xNumBytesRecvTotal < xLength ) + { + xNumBytes = FreeRTOS_recv( xSocketLocal, + &pucRxBuffer[ xNumBytesRecvTotal ], + xLength - xNumBytesRecvTotal, + 0 ); + + if( xNumBytes == 0 ) + { + tcptestFAILUREPRINTF( ( "Timed out receiving from echo server \r\n" ) ); + xResult = pdFAIL; + break; + } + else if( xNumBytes < 0 ) + { + tcptestFAILUREPRINTF( ( "Error %d while receiving from echo server\r\n", xNumBytes ) ); + xResult = pdFAIL; + break; + } + else /* xNumBytes > 0 */ + { + xNumBytesRecvTotal += xNumBytes; + } + } + + if( ( size_t ) xNumBytesRecvTotal != xLength ) + { + xResult = pdFAIL; + } + + return xResult; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvShutdownHelper( Socket_t xSocketLocal) +{ + BaseType_t xResult; + + /* The caller is done with the connected socket; initiate a graceful close: + * send a FIN packet and wait for the server to stop sending. */ + xResult = FreeRTOS_shutdown( xSocketLocal, FREERTOS_SHUT_RDWR ); + + if( 0 == xResult ) + { + /* Keep calling receive until an error code is returned. */ + do + { + xResult = FreeRTOS_recv( xSocketLocal, /* The socket being received from. */ + pcRxBuffer, /* The buffer into which the received data will be written. */ + tcptestBUFFER_SIZE, /* The size of the buffer provided to receive the data. */ + 0 ); + } + while( xResult >= 0 ); + + xResult = 0; + } + + return xResult; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvCloseHelper( Socket_t xSocketLocal, + volatile BaseType_t * pxSocketOpen ) +{ + BaseType_t xResult; + + xResult = FreeRTOS_closesocket( xSocketLocal ); + + *pxSocketOpen = pdFALSE; + + return xResult; +} + +/*-----------------------------------------------------------*/ + +static void prvCreateTxData( char * cBufferLocal, + size_t xMessageLength, + uint32_t ulTxCount ) +{ + size_t xCharacter; + char cChar = '0'; + + /* Set the Tx buffer to a known filler value. */ + memset( cBufferLocal, tcptestTX_BUFFER_FILLER, tcptestBUFFER_SIZE ); + + /* Fill the end of the buffer with ascending characters. */ + if( xMessageLength > 25 ) + { + for( xCharacter = 0; xCharacter < xMessageLength; xCharacter++ ) + { + cBufferLocal[ xCharacter ] = cChar; + cChar++; + + if( cChar > '~' ) + { + cChar = '0'; + } + } + } + + /* Write as much of the identifying string as possible to the buffer. */ + snprintf( cBufferLocal, xMessageLength, "%u TxRx with of length %u", ( unsigned ) ulTxCount, ( unsigned ) xMessageLength ); +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvCheckRxTxBuffers( uint8_t * pucTxBuffer, + uint8_t * pucRxBuffer, + size_t xMessageLength ) +{ + BaseType_t xReturn; + size_t xIndex; + + xReturn = pdPASS; + + /* Check that the message received is correct. */ + for( xIndex = 0; xIndex < xMessageLength; xIndex++ ) + { + if( pucTxBuffer[ xIndex ] != pucRxBuffer[ xIndex ] ) + { + xReturn = pdFAIL; + tcptestFAILUREPRINTF( ( "Message bytes received different than those sent. Message Length %d, Byte Index %d \r\n", xMessageLength, xIndex ) ); + tcptestASSERT( xReturn == pdPASS ); + } + } + + /* Check that neither the Rx nor Tx buffers were modified/overflowed. */ + for( xIndex = xMessageLength; xIndex < tcptestBUFFER_SIZE; xIndex++ ) + { + if( pucRxBuffer[ xIndex ] != tcptestRX_BUFFER_FILLER ) + { + xReturn = pdFAIL; + tcptestFAILUREPRINTF( ( "Rx buffer padding modified byte. Message Length %d, Byte Index %d \r\n", xMessageLength, xIndex ) ); + } + + if( pucTxBuffer[ xIndex ] != tcptestTX_BUFFER_FILLER ) + { + xReturn = pdFAIL; + tcptestFAILUREPRINTF( ( "Tx buffer padding modified. Message Length %d, Byte Index %d \r\n", xMessageLength, xIndex ) ); + } + } + + tcptestASSERT( xReturn == pdPASS ); + + return xReturn; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvCheckBufferUnmodified( uint8_t * pucBuffer, + uint8_t ucFiller, + size_t xLength ) +{ + BaseType_t xResult; + size_t xIndex; + + xResult = pdPASS; + + for( xIndex = 0; xIndex < xLength; xIndex++ ) + { + if( pucBuffer[ xIndex ] != ucFiller ) + { + xResult = pdFAIL; + tcptestFAILUREPRINTF( ( "Buffer modified at byte %d \r\n", xIndex ) ); + } + } + + return xResult; +} + +/*-----------------------------------------------------------*/ + +static BaseType_t prvCheckTimeout( TickType_t xStartTime, + TickType_t xEndTime, + TickType_t xTimeout ) +{ + BaseType_t xResult = pdPASS; + + /* Did the function run at least as long as the timeout? + * An "under tolerance" may be needed when the application timer + * and the network timer are sourced from separate clocks. */ + if( ( int32_t ) ( xEndTime - xStartTime ) < ( int32_t ) ( xTimeout - integrationtestportableTIMEOUT_UNDER_TOLERANCE ) ) + { + xResult = pdFAIL; + tcptestFAILUREPRINTF( ( "Start Time: %d, End Time: %d, Timeout: %d \n", xStartTime, xEndTime, xTimeout ) ); + } + + /* Did the function exit after a reasonable amount of time? + * An "over tolerance" is used to allow for overhead surrounding the timeout. */ + if( ( xEndTime - xStartTime ) > ( xTimeout + integrationtestportableTIMEOUT_OVER_TOLERANCE ) ) + { + xResult = pdFAIL; + tcptestFAILUREPRINTF( ( "Start Time: %d, End Time: %d, Timeout: %d \n", xStartTime, xEndTime, xTimeout ) ); + } + + return xResult; +} + +/*-----------------------------------------------------------*/ + +TEST_GROUP_RUNNER( Full_TCP ) +{ + RUN_TEST_CASE( Full_TCP, TCP_Socket ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_InvalidInputParams ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Setsockopt_InvalidParams ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Close_InvalidParams ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Shutdown_InvalidParams ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Create_Concurrent ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Connect_InvalidParams ); + RUN_TEST_CASE( Full_TCP, TCP_htons_HappyCase ); + RUN_TEST_CASE( Full_TCP, TCP_inet_addr_quick_HappyCase ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Send_InvalidParams ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Close_WithoutReceiving ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Shutdown_WithoutReceiving ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Recv_Invalid ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Recv_Unconnected ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Setsockopt_RCVTIMEO ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Recv_NonBlocking ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Shutdown ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Close ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_Recv_ByteByByte ); + RUN_TEST_CASE( Full_TCP, TCP_Socket_SendRecv_VaryLength ); + RUN_TEST_CASE( Full_TCP, TCP_test_dns_multiple_addresses ); + + /* Thread safety tests */ + RUN_TEST_CASE( Full_TCP, TCP_Threadsafe_SameSocketDifferentTasks ); + RUN_TEST_CASE( Full_TCP, TCP_Threadsafe_DifferentSocketsDifferentTasks ); +} + +/*-------------------------------------------------------------------*/ +/*-----------------------Begin Tests---------------------------------*/ +/*-------------------------------------------------------------------*/ + +static void prvSOCKETS_CloseInvalidParams( void ) +{ + BaseType_t xResult; + + /* Try to close with an invalid socket. */ + xResult = FreeRTOS_closesocket( FREERTOS_INVALID_SOCKET ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( 0, xResult, "Socket failed to close" ); +} + +TEST( Full_TCP, TCP_Socket_Close_InvalidParams ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_CloseInvalidParams(); +} + +/*-----------------------------------------------------------*/ + +static void prvSOCKETS_CloseWithoutReceiving( void ) +{ + BaseType_t xResult; + + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* Send a lot of data to the echo server but never use the recv. */ + xResult = FreeRTOS_send( xSocket, &cTransmittedString, tcptestTWICE_MAX_FRAME_SIZE, 0 ); + TEST_ASSERT_GREATER_THAN_MESSAGE( 0, xResult, "Socket was not able to send" ); + + /* Try to close. */ + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); +} + + +TEST( Full_TCP, TCP_Socket_Close_WithoutReceiving ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_CloseWithoutReceiving(); +} + +/*-----------------------------------------------------------*/ + +static void prvSOCKETS_ShutdownInvalidParams( void ) +{ + BaseType_t xResult; + + /* Ideally, we should test for all valid/invalid permutations + * of the parameters, but FreeRTOS_shutdown does not use the + * 2nd (xHow) parameter */ + + /* Call shutdown with invalid parameters. 2nd Parameter doesn't matter in this case */ + xResult = FreeRTOS_shutdown( FREERTOS_INVALID_SOCKET, FREERTOS_SHUT_RDWR ); + TEST_ASSERT_EQUAL_MESSAGE( -pdFREERTOS_ERRNO_EOPNOTSUPP, xResult, "Socket could shutdown with an invalid param" ); +} + +TEST( Full_TCP, TCP_Socket_Shutdown_InvalidParams ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_ShutdownInvalidParams(); +} + + +/*-----------------------------------------------------------*/ +static void prvSOCKETS_ShutdownWithoutReceiving( void ) +{ + BaseType_t xResult; + + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* Send a lot of data to the echo server but never use the recv. */ + xResult = FreeRTOS_send( xSocket, &cTransmittedString, tcptestTWICE_MAX_FRAME_SIZE, 0 ); + TEST_ASSERT_GREATER_THAN_MESSAGE( 0, xResult, "Socket was not able to send" ); + + xResult = FreeRTOS_shutdown( xSocket, FREERTOS_SHUT_RDWR); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to shutdown" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); +} + + +TEST( Full_TCP, TCP_Socket_Shutdown_WithoutReceiving ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_ShutdownWithoutReceiving(); +} + +/*-----------------------------------------------------------*/ + +static void prvFreeRTOS_recv_On_Unconnected_Socket( void ) +{ + BaseType_t xResult; + uint8_t ucBuf; + volatile BaseType_t xConnectedSocketOpen = pdFALSE; + volatile Socket_t xConnectedSocket; + + if( TEST_PROTECT() ) + { + xSocket = prvTcpSocketHelper( &xSocketOpen ); + TEST_ASSERT_NOT_EQUAL_MESSAGE( FREERTOS_INVALID_SOCKET, xSocket, "Socket creation failed" ); + + xResult = prvSetSockOptHelper( xSocket, xReceiveTimeOut, xSendTimeOut ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "SetSockOpt Failed" ); + + + /* We connect another socket. The rational for this is a bug that was experienced in the past + * where the data would be received by from another socket. */ + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xConnectedSocket, xReceiveTimeOut, xSendTimeOut, &xConnectedSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* Send data from the connected socket. */ + xResult = FreeRTOS_send( xConnectedSocket, &ucBuf, 1, 0 ); + TEST_ASSERT_GREATER_THAN_MESSAGE( 0, xResult, "Socket was not able to send" ); + + /* Try to receive on unconnected socket. */ + xResult = FreeRTOS_recv( xSocket, &ucBuf, 1, 0 ); + TEST_ASSERT_LESS_THAN_MESSAGE( 0, xResult, "Socket was able to receive from unconnected socket" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + /* Close the other socket. */ + xResult = prvShutdownHelper( xConnectedSocket ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to shutdown" ); + + xResult = prvCloseHelper( xConnectedSocket, &xConnectedSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + xConnectedSocketOpen = pdFALSE; + } + + if( xConnectedSocketOpen == pdTRUE ) + { + ( void ) prvShutdownHelper( xConnectedSocket ); + + xResult = prvCloseHelper( xConnectedSocket, &xConnectedSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close." ); + } +} + +TEST( Full_TCP, TCP_Socket_Recv_Unconnected ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvFreeRTOS_recv_On_Unconnected_Socket(); +} + +/*-----------------------------------------------------------*/ + +static void prvSOCKETS_Socket_TCP( void ) +{ + BaseType_t xResult; + + /* Make TCP socket. */ + xSocket = FreeRTOS_socket( FREERTOS_AF_INET, + FREERTOS_SOCK_STREAM, + FREERTOS_IPPROTO_TCP ); + + TEST_ASSERT_NOT_EQUAL( xSocket, FREERTOS_INVALID_SOCKET ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); +} + +TEST( Full_TCP, TCP_Socket ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_Socket_TCP(); +} + +/*-----------------------------------------------------------*/ + +static void prvSOCKETS_SetSockOpt_RCVTIMEO( void ) +{ + BaseType_t xResult; + UBaseType_t uxOldPriority; + TickType_t xStartTime; + TickType_t xEndTime; + TickType_t xTimeout; + TickType_t xTimeouts[] = { 30, 100, 10000 }; /* TODO: Add 0, nonblocking tests */ + uint8_t ucBuffer; + size_t xIndex; + + + xResult = pdPASS; + tcptestPRINTF( ( "Starting %s \r\n", __FUNCTION__ ) ); + tcptestPRINTF( ( "This tests timeouts, so it takes a while! \r\n" ) ); + + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* Record the priority of this task. */ + uxOldPriority = uxTaskPriorityGet( NULL ); + + /* + * Set this task to be the highest possible priority. + * Since we are testing timeouts, we don't want other tasks + * running in the middle of it. + */ + vTaskPrioritySet( NULL, configMAX_PRIORITIES - 1 ); + + /* + * Set the receive timeout, check the tick count, + * call receive (with no data sent), check the tick + * count again, make sure time elapsed is within + * time expected. + */ + for( xIndex = 0; xIndex < sizeof( xTimeouts ) / sizeof( TickType_t ); xIndex++ ) + { + xTimeout = pdMS_TO_TICKS( xTimeouts[ xIndex ] ); + xResult = FreeRTOS_setsockopt( xSocket, 0, FREERTOS_SO_RCVTIMEO, &xTimeout, sizeof( TickType_t ) ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to set receive timeout" ); + + xStartTime = xTaskGetTickCount(); + xResult = FreeRTOS_recv( xSocket, &ucBuffer, 1, 0 ); + xEndTime = xTaskGetTickCount(); + TEST_ASSERT_LESS_THAN_MESSAGE( 1, xResult, "Receive call failed in receive timeout test" ); + xResult = prvCheckTimeout( xStartTime, xEndTime, xTimeout ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdPASS, xResult, "Receive timeout was outside of acceptable range" ); + } + + /* Restore the old priority of this task. */ + vTaskPrioritySet( NULL, uxOldPriority ); + xResult = prvShutdownHelper( xSocket ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to shutdown" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + tcptestPRINTF( ( "%s passed\r\n", __FUNCTION__ ) ); +} + + +TEST( Full_TCP, TCP_Socket_Setsockopt_RCVTIMEO ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_SetSockOpt_RCVTIMEO(); +} + +/*-----------------------------------------------------------*/ + +static void prvSOCKETS_NonBlocking_Test( void ) +{ + BaseType_t xResult; + int32_t lNumBytes; + TickType_t xStartTime; + TickType_t xEndTime; + TickType_t xTimeout = 0; + TickType_t xWaitTime = 1000; + uint8_t * pucTxBuffer = ( uint8_t * ) pcTxBuffer; + uint8_t * pucRxBuffer = ( uint8_t * ) pcRxBuffer; + size_t xMessageLength = 1200; + size_t xNumBytesReceived = 0; + + + xResult = pdPASS; + tcptestPRINTF( ( "Starting %s \r\n", __FUNCTION__ ) ); + tcptestPRINTF( ( "This tests timeouts, so it takes a while! \r\n" ) ); + + if( TEST_PROTECT() ) + { + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* + * Set the receive timeout, check the tick count, + * call receive (with no data sent), check the tick + * count again, make sure time elapsed is within + * time expected. + */ + xResult = FreeRTOS_setsockopt( xSocket, 0, FREERTOS_SO_RCVTIMEO, &xTimeout, sizeof( TickType_t ) ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to set receive timeout" ); + + xStartTime = xTaskGetTickCount(); + xResult = FreeRTOS_recv( xSocket, &pucRxBuffer, 1, 0 ); + xEndTime = xTaskGetTickCount(); + TEST_ASSERT_LESS_THAN_MESSAGE( 1, xResult, "Receive call failed in receive timeout test" ); + + xResult = prvCheckTimeout( xStartTime, xEndTime, xTimeout ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdPASS, xResult, "Receive timeout was outside of acceptable range" ); + + /* + * Send data and receive data in nonblocking mode + */ + memset( pucTxBuffer, tcptestTX_BUFFER_FILLER, tcptestBUFFER_SIZE ); + prvCreateTxData( ( char * ) pucTxBuffer, xMessageLength, 0 ); + + xResult = prvSendHelper( xSocket, pucTxBuffer, xMessageLength ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdPASS, xResult, "Data failed to send\r\n" ); + + memset( pucRxBuffer, tcptestRX_BUFFER_FILLER, tcptestBUFFER_SIZE ); + xStartTime = xTaskGetTickCount(); + xEndTime = xTaskGetTickCount(); + + do + { + lNumBytes = FreeRTOS_recv( xSocket, &pucRxBuffer[ xNumBytesReceived ], xMessageLength - xNumBytesReceived, 0 ); + + if( lNumBytes > 0 ) + { + /* + * If xResult is negative, it's an error code. Because xNumBytesReceived is an + * unsigned int, it will become a large positive number, so the while loop + * would end prematurely. This if statement prevents that. + */ + xNumBytesReceived += lNumBytes; + } + + xEndTime = xTaskGetTickCount(); + } + while( ( ( xEndTime - xStartTime ) < xWaitTime ) && ( xMessageLength > xNumBytesReceived ) ); + + TEST_ASSERT_EQUAL_INT32_MESSAGE( xMessageLength, xNumBytesReceived, "Data was not received \r\n" ); + + xResult = prvCheckRxTxBuffers( pucTxBuffer, pucRxBuffer, xMessageLength ); + + xResult = prvShutdownHelper( xSocket ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to shutdown" ); + } + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + tcptestPRINTF( ( "%s passed\r\n", __FUNCTION__ ) ); +} + + +TEST( Full_TCP, TCP_Socket_Recv_NonBlocking ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_NonBlocking_Test(); +} + +/*-----------------------------------------------------------*/ + +static void prvSetSockOpt_InvalidParams( void ) +{ + BaseType_t xResult; + + if( TEST_PROTECT() ) + { + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* Try to set the invalid option. */ + xResult = FreeRTOS_setsockopt( xSocket, + 0, /* lLevel - Not used. */ + -1, /* Invalid option name. */ + NULL, /* pvOptionValue - This is insignificant as the option name is invalid. */ + 0 /* xOptionLength - zero for NULL value. */ + ); + + /* Since the option name supplied in the previous + * call was invalid, we expect the call to the API + * SOCKETS_SetSockOpt to fail. */ + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "SOCKETS_SetSockOpt with invalid option succeeded." ); + + /* Try to set a valid option on an invalid socket. */ + xResult = FreeRTOS_setsockopt( FREERTOS_INVALID_SOCKET, /* Invalid socket. */ + 0, /* lLevel - Not used. */ + FREERTOS_SO_RCVTIMEO, /* Receive timeout. */ + &( xReceiveTimeOut ), + sizeof( TickType_t ) ); + + /* Since the socket passed in the previous call was + * invalid, we expect the call to the API + * SOCKETS_SetSockOpt to fail. */ + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "SOCKETS_SetSockOpt with invalid socket succeeded." ); + } + + /* If the code reaches here, it means that the socket + * was created successfully. Make sure to free it even + * if any of the above assertion fails. This is needed + * to avoid leaks. */ + xResult = prvCloseHelper( xSocket, &( xSocketOpen ) ); + + /* If this fails there is nothing much we can do + * to avoid leaking. */ + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "SOCKETS_Close failed. \r\n" ); +} + +TEST( Full_TCP, TCP_Socket_Setsockopt_InvalidParams ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSetSockOpt_InvalidParams(); + + tcptestPRINTF( ( "%s complete.\r\n", __FUNCTION__ ) ); +} + +/*-----------------------------------------------------------*/ + +static void prvSOCKETS_SetSockOpt_SNDTIMEO( void ) +{ + /* TODO: This is a stub function. */ + TEST_FAIL_MESSAGE( "This test is not implemented." ); +} + +TEST( Full_TCP, FreeRTOSSetSockOpt_SNDTIMEO ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_SetSockOpt_SNDTIMEO(); +} + +/*-----------------------------------------------------------*/ + +static void prvSOCKETS_Shutdown( void ) +{ + BaseType_t xResult; + uint8_t ucBuf; + + xResult = pdPASS; + + /* Shutdown: Read. */ + + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + xResult = FreeRTOS_shutdown( xSocket, FREERTOS_SHUT_RD ); + TEST_ASSERT_EQUAL_INT32( pdFREERTOS_ERRNO_NONE, xResult ); + + do + { + xResult = FreeRTOS_recv( xSocket, &ucBuf, 1, 0 ); + } + while( xResult >= 0 ); + + TEST_ASSERT_LESS_THAN_INT32( 0, xResult ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + /* Shutdown: Write. Expected behavior of send after + * Shutdown/WRITE is ambiguous. Therefore, we cannot + * test anything except the read/recv. */ +} + +TEST( Full_TCP, TCP_Socket_Shutdown ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_Shutdown(); +} + +/*-----------------------------------------------------------*/ + +static void prvTestSOCKETS_Close( void ) +{ + BaseType_t xResult; + uint8_t ucBuf; + + xResult = pdPASS; + + /* Close an unconnected socket */ + xSocket = prvTcpSocketHelper( &xSocketOpen ); + TEST_ASSERT_NOT_EQUAL_MESSAGE( FREERTOS_INVALID_SOCKET, xSocket, "Socket creation failed" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + /* The secure sockets API abstraction requires that Socket_t be treated as + * opaque. It could be a pointer, a handle, an index, or whatever. In addition, + * SOCKETS_Close treats the socket only as input. Therefore, it is not a valid + * test to pass a socket that has been freed, via explicit close, to other + * downstream socket APIs. */ + xSocket = FREERTOS_INVALID_SOCKET; + + /* Closed socket should not connect, send or receive */ + xResult = FreeRTOS_send( xSocket, &ucBuf, 1, 0 ); + TEST_ASSERT_LESS_THAN_INT32( 0, xResult ); + xResult = FreeRTOS_recv( xSocket, &ucBuf, 1, 0 ); + TEST_ASSERT_LESS_THAN_INT32( 0, xResult ); + + /* Close a connected socket */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + /* See comment above. */ + xSocket = FREERTOS_INVALID_SOCKET; + + /* Closed socket should not connect, send or receive */ + xResult = FreeRTOS_send( xSocket, &ucBuf, 1, 0 ); + TEST_ASSERT_LESS_THAN_INT32( 0, xResult ); + xResult = FreeRTOS_recv( xSocket, &ucBuf, 1, 0 ); + TEST_ASSERT_LESS_THAN_INT32( 0, xResult ); + + /* Close a shutdown socket */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + xResult = prvShutdownHelper( xSocket ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to shutdown" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + /* See comment above. */ + xSocket = FREERTOS_INVALID_SOCKET; + + /* Closed socket should not connect, send or receive */ + xResult = FreeRTOS_send( xSocket, &ucBuf, 1, 0 ); + TEST_ASSERT_LESS_THAN_INT32( 0, xResult ); + xResult = FreeRTOS_recv( xSocket, &ucBuf, 1, 0 ); + TEST_ASSERT_LESS_THAN_INT32( 0, xResult ); + + tcptestPRINTF( ( "%s passed\r\n", __FUNCTION__ ) ); +} + +TEST( Full_TCP, TCP_Socket_Close ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvTestSOCKETS_Close(); +} + +/*-----------------------------------------------------------*/ + +static void prvTestFreeRTOS_recv_ByteByByte( void ) +{ + BaseType_t xResult = pdFAIL; + uint32_t ulTxCount; + size_t xBytesReceived; + uint8_t * pucTxBuffer = ( uint8_t * ) pcTxBuffer; + uint8_t * pucRxBuffer = ( uint8_t * ) pcRxBuffer; + size_t xMessageLengths[] = { 2, 7, 8, 9, 20 }; + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + for( ulTxCount = 0; ulTxCount < sizeof( xMessageLengths ) / sizeof( xMessageLengths[ 0 ] ); ulTxCount++ ) + { + xBytesReceived = 0; + + prvCreateTxData( ( char * ) pucTxBuffer, xMessageLengths[ ulTxCount ], ulTxCount ); + xResult = prvSendHelper( xSocket, pucTxBuffer, xMessageLengths[ ulTxCount ] ); + + while( ( xResult == pdPASS ) && ( xBytesReceived < xMessageLengths[ ulTxCount ] ) ) + { + memset( pucRxBuffer, tcptestRX_BUFFER_FILLER, tcptestBUFFER_SIZE ); + xResult = prvRecvHelper( xSocket, pucRxBuffer, 1 ); + + if( xResult == pdPASS ) + { + if( pucRxBuffer[ 0 ] == pucTxBuffer[ xBytesReceived ] ) + { + /* Check that all but the first byte of the RxBuffer is unmodified. */ + xResult = prvCheckBufferUnmodified( pucRxBuffer + 1, + tcptestRX_BUFFER_FILLER, + tcptestBUFFER_SIZE - 1 ); + } + else + { + xResult = pdFAIL; + tcptestPRINTF( ( "Byte %d was incorrectly received\r\n", ( xBytesReceived + 1 ) ) ); + } + } + + xBytesReceived++; + } + } + + /* Close this socket before looping back to create another. */ + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdPASS, xResult, "Failed received" ); + xResult = prvShutdownHelper( xSocket ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to shutdown" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); +} + +TEST( Full_TCP, TCP_Socket_Recv_ByteByByte ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvTestFreeRTOS_recv_ByteByByte(); +} + +/*-----------------------------------------------------------*/ + +static void prvFreeRTOS_sendRecv_VaryLength( void ) +{ + BaseType_t xResult; + uint32_t ulIndex; + uint32_t ulTxCount; + const uint32_t ulMaxLoopCount = 10; + uint32_t ulI; + uint8_t * pucTxBuffer = ( uint8_t * ) pcTxBuffer; + uint8_t * pucRxBuffer = ( uint8_t * ) pcRxBuffer; + size_t xMessageLengths[] = { 1, 2, 7, 8, 9, 1199, 1200, 1201 }; /* TODO: Add 0, send sizes larger than MTU. */ + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + xResult = pdPASS; + ulTxCount = 0; + + for( ulIndex = 0; ulIndex < sizeof( xMessageLengths ) / sizeof( size_t ); ulIndex++ ) + { + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* Send each message length ulMaxLoopCount times. */ + for( ulI = 0; ulI < ulMaxLoopCount; ulI++ ) + { + memset( pucTxBuffer, tcptestTX_BUFFER_FILLER, tcptestBUFFER_SIZE ); + + prvCreateTxData( ( char * ) pucTxBuffer, + xMessageLengths[ ulIndex ], + ulTxCount ); + ulTxCount++; + + xResult = prvSendHelper( xSocket, + pucTxBuffer, + xMessageLengths[ ulIndex ] ); + + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdPASS, xResult, "Data failed to send\r\n" ); + memset( pucRxBuffer, tcptestRX_BUFFER_FILLER, tcptestBUFFER_SIZE ); + xResult = prvRecvHelper( xSocket, + pucRxBuffer, + xMessageLengths[ ulIndex ] ); + + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdPASS, xResult, "Data was not received \r\n" ); + xResult = prvCheckRxTxBuffers( pucTxBuffer, + pucRxBuffer, + xMessageLengths[ ulIndex ] ); + } + + xResult = prvShutdownHelper( xSocket ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to shutdown" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + /* Print feedback since this test takes a while! */ + tcptestPRINTF( ( " Sending messages with length %d complete\r\n", xMessageLengths[ ulIndex ] ) ); + + /* Pause for a short while to ensure the network is not too + * congested. */ + vTaskDelay( tcptestLOOP_DELAY ); + } + + /* Report Test Results. */ + tcptestPRINTF( ( "%s passed\r\n", __FUNCTION__ ) ); +} + +TEST( Full_TCP, TCP_Socket_SendRecv_VaryLength ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvFreeRTOS_sendRecv_VaryLength(); +} + +/*-----------------------------------------------------------*/ + +static void prvSOCKETS_Socket_InvalidInputParams( void ) +{ + BaseType_t xResult; + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + /* Providing invalid domain. */ + if( TEST_PROTECT() ) + { + xSocket = FreeRTOS_socket( ( FREERTOS_AF_INET + 1 ), + FREERTOS_SOCK_STREAM, + FREERTOS_IPPROTO_TCP ); + + /* If the test code reaches here, it failed. */ + TEST_FAIL_MESSAGE( "Invalid socket domain accepted" ); + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + } + + /* Providing invalid type. */ + if( TEST_PROTECT() ) + { + xSocket = FreeRTOS_socket( FREERTOS_AF_INET, + ( FREERTOS_SOCK_STREAM | FREERTOS_SOCK_DGRAM ), + FREERTOS_IPPROTO_TCP ); + + TEST_FAIL_MESSAGE( "Invalid socket type accepted" ); + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + } + + /* Providing invalid protocol. */ + if( TEST_PROTECT() ) + { + xSocket = FreeRTOS_socket(FREERTOS_AF_INET, + FREERTOS_SOCK_STREAM, + ( FREERTOS_IPPROTO_TCP | FREERTOS_IPPROTO_UDP ) ); + + TEST_FAIL_MESSAGE( "Invalid socket protocol accepted" ); + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + } + + if( TEST_PROTECT() ) + { + /* Mixing DGRAM type with TCP protocol (instead of UDP). */ + xSocket = FreeRTOS_socket( FREERTOS_AF_INET, + FREERTOS_SOCK_DGRAM, + FREERTOS_IPPROTO_TCP ); + + TEST_FAIL_MESSAGE( "Invalid socket created - mixed TCP with DGRAM " ); + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + } + + /* Mixing STREAM type with UDP protocol (instead of TCP). */ + if( TEST_PROTECT() ) + { + xSocket = FreeRTOS_socket( FREERTOS_AF_INET, + FREERTOS_SOCK_STREAM, + FREERTOS_IPPROTO_UDP ); + + TEST_FAIL_MESSAGE( "Invalid socket created - mixed UDP with STREAM" ); + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + } + + /* Report Test Results. */ + tcptestPRINTF( ( "%s passed\r\n", __FUNCTION__ ) ); +} + +TEST( Full_TCP, TCP_Socket_InvalidInputParams ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_Socket_InvalidInputParams(); +} + +/*-----------------------------------------------------------*/ + +/* + * Verify the number of sockets that can be concurrently + * created up to a configured maximum. Return pdFAIL if + * fewer than that number are created. If more than the + * maximum can be created, a warning is printed, but this + * is not a failure condition. Some ports are limited only + * by free memory. For these ports, check that a reasonable + * number of sockets can be created concurrently. + */ +#ifdef integrationtestportableMAX_NUM_UNSECURE_SOCKETS + #define MAX_NUM_SOCKETS integrationtestportableMAX_NUM_UNSECURE_SOCKETS +#else + #define MAX_NUM_SOCKETS 5u +#endif +static void prvSOCKETS_Socket_ConcurrentCount( void ) +{ + BaseType_t xResult = pdFAIL; + Socket_t xCreatedSockets[ MAX_NUM_SOCKETS ]; + BaseType_t xSocketsCreated; + Socket_t xSocketLocal; + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + xResult = pdPASS; + + for( xSocketsCreated = 0; xSocketsCreated < MAX_NUM_SOCKETS; xSocketsCreated++ ) + { + xSocketLocal = FreeRTOS_socket( FREERTOS_AF_INET, FREERTOS_SOCK_STREAM, FREERTOS_IPPROTO_TCP ); + + if( xSocketLocal == FREERTOS_INVALID_SOCKET ) + { + xResult = pdFAIL; + tcptestPRINTF( ( "%s failed creating a socket number %d \r\n", __FUNCTION__, xSocketsCreated ) ); + break; + } + else + { + xCreatedSockets[ xSocketsCreated ] = xSocketLocal; + } + } + + #ifdef integrationtestportableMAX_NUM_UNSECURE_SOCKETS + if( xResult == pdPASS ) + { + xSocketLocal = FreeRTOS_socket(FREERTOS_AF_INET, FREERTOS_SOCK_STREAM, FREERTOS_IPPROTO_TCP); + + if( xSocketLocal != FREERTOS_INVALID_SOCKET ) + { + SOCKETS_Close( xSocket ); + tcptestPRINTF( ( "%s exceeded maximum number of sockets (%d > %d); is the value of " \ + "integrationtestportableMAX_NUM_UNSECURE_SOCKETS correct?\r\n", __FUNCTION__, + ( MAX_NUM_SOCKETS + 1 ), MAX_NUM_SOCKETS ) ); + } + } + #endif /* ifdef integrationtestportableMAX_NUM_UNSECURE_SOCKETS */ + + TEST_ASSERT_EQUAL_UINT32_MESSAGE(pdPASS, xResult, "Concurrent num sockets test failed"); + + /* Cleanup. */ + while( xSocketsCreated > 0 ) + { + --xSocketsCreated; + xResult = FreeRTOS_closesocket( xCreatedSockets[ xSocketsCreated ] ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE(0, xResult, "Closing Socket in Multiple Concurrent Socket test failed\n"); + } + + /* Report Test Results. */ + tcptestPRINTF( ( "%s passed\r\n", __FUNCTION__ ) ); +} + +TEST( Full_TCP, TCP_Socket_Create_Concurrent ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_Socket_ConcurrentCount(); +} + +/*-----------------------------------------------------------*/ + +static void prvFreeRTOS_connect_InvalidParams( void ) +{ + BaseType_t xResult; + struct freertos_sockaddr xEchoServerAddress; + + uint32_t ulEchoServerIP; + + ulEchoServerIP = FreeRTOS_inet_addr_quick( tcptestECHO_SERVER_ADDR0, + tcptestECHO_SERVER_ADDR1, + tcptestECHO_SERVER_ADDR2, + tcptestECHO_SERVER_ADDR3 ); + + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + xSocket = prvTcpSocketHelper( &xSocketOpen ); + TEST_ASSERT_NOT_EQUAL_MESSAGE( FREERTOS_INVALID_SOCKET, xSocket, "Socket creation failed" ); + + /* Echo requests are sent to the echo server. The echo server is + * listening to tcptestECHO_PORT on this computer's IP address. */ + xEchoServerAddress.sin_port = FreeRTOS_htons( tcptestECHO_PORT ); + xEchoServerAddress.sin_addr = ulEchoServerIP; + + /* Invalid socket. */ + xResult = FreeRTOS_connect( FREERTOS_INVALID_SOCKET, + &xEchoServerAddress, + sizeof( xEchoServerAddress ) ); + + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "Connect on an invalid socket succeeded\n" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + + + /* Invalid IP address (0.0.0.0). TODO: Investigate reserved IP addresses */ + xSocket = prvTcpSocketHelper( &xSocketOpen ); + TEST_ASSERT_NOT_EQUAL_MESSAGE( FREERTOS_INVALID_SOCKET, xSocket, "Socket creation failed" ); + + xEchoServerAddress.sin_addr = FreeRTOS_inet_addr_quick( 0, 0, 0, 0 ); + xResult = FreeRTOS_connect( xSocket, + &xEchoServerAddress, + sizeof( xEchoServerAddress ) ); + + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "Connect to IP Address 0.0.0.0 worked" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + + + /* Invalid port (0). */ + xSocket = prvTcpSocketHelper( &xSocketOpen ); + TEST_ASSERT_NOT_EQUAL_MESSAGE( FREERTOS_INVALID_SOCKET, xSocket, "Socket creation failed" ); + + xEchoServerAddress.sin_port = FreeRTOS_htons( 0 ); + xEchoServerAddress.sin_addr = ulEchoServerIP; + xResult = FreeRTOS_connect( xSocket, + &xEchoServerAddress, + sizeof( xEchoServerAddress ) ); + + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "Connect to Port 0 worked" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + + + /* NULL Address. */ + xSocket = prvTcpSocketHelper( &xSocketOpen ); + TEST_ASSERT_NOT_EQUAL_MESSAGE( FREERTOS_INVALID_SOCKET, xSocket, "Socket creation failed" ); + xResult = FreeRTOS_connect( xSocket, NULL, 0 ); + + /* Ensure that the attempt to connect to NULL address fails. */ + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "Connect to NULL Address worked." ); + + /* TODO: Does port 0 mean connect to any available port? */ + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); +} + +TEST( Full_TCP, TCP_Socket_Connect_InvalidParams ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvFreeRTOS_connect_InvalidParams(); +} + +/*-----------------------------------------------------------*/ + +static void prvSend_Invalid( void ) +{ + BaseType_t xResult; + uint8_t * pucTxBuffer = ( uint8_t * ) pcTxBuffer; + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + /* Unconnected socket. */ + if( TEST_PROTECT() ) + { + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* Invalid socket. */ + xResult = FreeRTOS_send( FREERTOS_INVALID_SOCKET, pucTxBuffer, 300, 0 ); + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "Socket send fails with invalid socket" ); + + /* NULL Tx Buffer. */ + xResult = FreeRTOS_send( xSocket, NULL, 300, 0 ); + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "Socket send should return error for NULL input buffer" ); + } + else + { + TEST_FAIL_MESSAGE( "Sending on an TCP socket with NULL buffer triggered an assert " ); + } + + /* Cleanup. */ + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + + /* Unconnected socket. */ + if( TEST_PROTECT() ) + { + xSocket = prvTcpSocketHelper( &xSocketOpen ); + TEST_ASSERT_NOT_EQUAL_MESSAGE( FREERTOS_INVALID_SOCKET, xSocket, "Socket creation failed" ); + + xResult = prvSetSockOptHelper( xSocket, xReceiveTimeOut, xSendTimeOut ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Set sockopt failed" ); + + xResult = FreeRTOS_send( xSocket, pucTxBuffer, 300, 0 ); + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "Socket send worked with an unconnected socket" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket close failed" ); + } + else + { + TEST_FAIL_MESSAGE( "Sending on an unconnected TCP socket triggered an assert " ); + } + + /* Report Test Results. */ + tcptestPRINTF( ( "%s passed\r\n", __FUNCTION__ ) ); +} + +TEST( Full_TCP, TCP_Socket_Send_InvalidParams ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSend_Invalid(); +} + +/*-------------------------------------------------------------------*/ + +static void prvRecv_Invalid( void ) +{ + BaseType_t xResult; + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xReceiveTimeOut, xSendTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* Receive with NULL buffer should fail in FREERTOS_ZERO_COPY mode. */ + xResult = FreeRTOS_recv( xSocket, NULL, 100, FREERTOS_ZERO_COPY ); + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "Socket receive with NULL receive buffer should have triggered error" ); + + /* Receive on invalid socket should fail. */ + xResult = FreeRTOS_recv( FREERTOS_INVALID_SOCKET, pcRxBuffer, tcptestBUFFER_SIZE, 0 ); + TEST_ASSERT_LESS_THAN_INT32_MESSAGE( 0, xResult, "Socket receive with invalid socket should have triggered error" ); + + /* Cleanup. */ + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); +} + +TEST( Full_TCP, TCP_Socket_Recv_Invalid ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvRecv_Invalid(); +} + +/*-------------------------------------------------------------------*/ + +/** @brief This test will create a task the will send data to an echo server. + * The data coming back will be received in that task. + * The size of receiving buffer, the priority, the size of data send, + * will keep changing to cover a maximum cases. + */ +static void prvSOCKETS_Threadsafe_SameSocketDifferentTasks( void ) +{ + BaseType_t xTotalReceived, xReturned = 0; + size_t xRecvLoop, xRecvLen; + tcptestEchoTestModes_t xMode; + BaseType_t xResult; + volatile char * pcReceivedString; + volatile BaseType_t xReceivedStringAllocated = pdFALSE; + volatile BaseType_t xSocketPassingQueueAllocated = pdFALSE; + volatile BaseType_t xSyncEventGroupAllocated = pdFALSE; + volatile TaskHandle_t xCreatedTask; + + if( TEST_PROTECT() ) + { + pcReceivedString = pvPortMalloc( ipconfigTCP_MSS * sizeof( char ) ); + configASSERT( pcReceivedString != NULL ); + xReceivedStringAllocated = pdTRUE; + + /* Create the queue used to pass the socket to use from the Tx task to the + * Rx task. */ + xSocketPassingQueue = xQueueCreate( 1, sizeof( Socket_t ) ); + configASSERT( xSocketPassingQueue ); + xSocketPassingQueueAllocated = pdTRUE; + + /* Create the event group used by the Tx and Rx tasks to synchronize prior + * to commencing a cycle using a new socket. */ + xSyncEventGroup = xEventGroupCreate(); + configASSERT( xSyncEventGroup ); + xSyncEventGroupAllocated = pdTRUE; + + /* Create the task that sends to an echo server, but lets a different task + * receive the reply on the same socket. */ + xResult = xTaskCreate( prvEchoClientTxTask, /* The function that implements the task. */ + "EchoMultiTx", /* Just a text name for the task to aid debugging. */ + tcptestTCP_ECHO_TASKS_STACK_SIZE, /* The stack size is defined in aws_demo_config.h. */ + NULL, /* The task parameter, not used in this case. */ + tcptestTCP_ECHO_TASKS_PRIORITY, /* The priority assigned to the task is defined in aws_demo_config.h. */ + ( TaskHandle_t * ) &xCreatedTask ); + TEST_ASSERT_EQUAL_MESSAGE( pdPASS, xResult, "Task creation failed" ); + + for( xRecvLoop = 0; xRecvLoop < tcptestMAX_LOOPS_ECHO_TEST; xRecvLoop++ ) + { + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xSocket, xEchoTestRxTxTimeOut, xEchoTestRxTxTimeOut, &xSocketOpen ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Failed to connect" ); + + /* Wait to receive the socket that will be used from the Tx task. */ + if( xEventGroupSync( xSyncEventGroup, /* The event group used for the rendezvous. */ + tcptestRX_TASK_BIT, /* The bit representing the Tx task reaching the rendezvous. */ + ( tcptestTX_TASK_BIT | tcptestRX_TASK_BIT ), /* Also wait for the Rx task. */ + tcptestECHO_TEST_SYNC_TIMEOUT_TICKS ) != ( tcptestTX_TASK_BIT | tcptestRX_TASK_BIT ) ) + { + TEST_FAIL(); + } + + /* Nothing received yet. */ + xTotalReceived = 0; + + xMode = ( tcptestEchoTestModes_t ) ( xRecvLoop % tcptestMAX_ECHO_TEST_MODES ); /* % should be optimized to simple masking since only 4 modes are present.*/ + /* Using % to avoid bug in case a new state is unknowingly added. */ + + xRecvLen = ipconfigTCP_MSS; + vTaskPrioritySet( NULL, tcptestECHO_TEST_HIGH_PRIORITY ); + + /* Set low priority if requested . */ + if( ( xMode == LARGE_BUFFER_LOW_PRIORITY ) || ( xMode == SMALL_BUFFER_LOW_PRIORITY ) ) + { + vTaskPrioritySet( NULL, tcptestECHO_TEST_LOW_PRIORITY ); + } + + if( ( xMode == SMALL_BUFFER_HIGH_PRIORITY ) || ( xMode == SMALL_BUFFER_LOW_PRIORITY ) ) + { + xRecvLen = 1; + } + + while( xTotalReceived < tcptestTWICE_MAX_FRAME_SIZE ) + { + xReturned = FreeRTOS_recv( ( Socket_t ) xSocket, ( char * ) pcReceivedString, xRecvLen, 0 ); + + TEST_ASSERT_NOT_EQUAL_MESSAGE( 0, xReturned, "Timeout occurred" ); + TEST_ASSERT_GREATER_THAN_MESSAGE( 0, xReturned, "Error occurred receiving large message" ); + + /* Data was received. */ + TEST_ASSERT_EQUAL_MEMORY( &cTransmittedString[ xTotalReceived ], pcReceivedString, xReturned ); + + xTotalReceived += xReturned; + } + + /* Rendezvous with the Tx task ready to start a new cycle with a + * different socket. */ + if( xEventGroupSync( xSyncEventGroup, /* The event group used for the rendezvous. */ + tcptestRX_TASK_BIT, /* The bit representing the Rx task reaching the rendezvous. */ + ( tcptestTX_TASK_BIT | tcptestRX_TASK_BIT ), /* Also wait for the Tx task. */ + tcptestECHO_TEST_SYNC_TIMEOUT_TICKS ) != ( tcptestTX_TASK_BIT | tcptestRX_TASK_BIT ) ) + { + TEST_FAIL(); + } + + xResult = prvShutdownHelper( xSocket ); + TEST_ASSERT_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to shutdown" ); + + xResult = prvCloseHelper( xSocket, &xSocketOpen ); + TEST_ASSERT_GREATER_OR_EQUAL_INT32_MESSAGE( pdFREERTOS_ERRNO_NONE, xResult, "Socket failed to close" ); + } + } + + /* Free all dynamic memory. */ + if( xReceivedStringAllocated == pdTRUE ) + { + vPortFree( ( char * ) pcReceivedString ); + } + + if( xSocketPassingQueueAllocated == pdTRUE ) + { + vQueueDelete( xSocketPassingQueue ); + } + + if( xSyncEventGroupAllocated == pdTRUE ) + { + vEventGroupDelete( xSyncEventGroup ); + } + + vTaskDelete( xCreatedTask ); + + /* Set priority back. */ + vTaskPrioritySet( NULL, tskIDLE_PRIORITY ); +} + +TEST( Full_TCP, TCP_Threadsafe_SameSocketDifferentTasks ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvSOCKETS_Threadsafe_SameSocketDifferentTasks(); +} + +/*-----------------------------------------------------------*/ + +static void prvEchoClientTxTask( void * pvParameters ) +{ + BaseType_t xReturned = 0; + BaseType_t xTransmitted; + BaseType_t xStatus; + size_t xLenToSend, xSendLoop; + size_t xMaxBufferSize; + tcptestEchoTestModes_t xMode; + + + /* Avoid warning about unused parameter. */ + ( void ) pvParameters; + + /* Offset by one so of sending and receiving task are not always the same. Sometimes both low/high or opposite. */ + + /* Recv task Sending task + * LARGE_BUFFER_HIGH_PRIORITY SMALL_BUFFER_HIGH_PRIORITY + * SMALL_BUFFER_HIGH_PRIORITY LARGE_BUFFER_LOW_PRIORITY + * LARGE_BUFFER_LOW_PRIORITY SMALL_BUFFER_LOW_PRIORITY + * SMALL_BUFFER_LOW_PRIORITY LARGE_BUFFER_HIGH_PRIORITY + */ + for( xSendLoop = 1; xSendLoop < tcptestMAX_LOOPS_ECHO_TEST + 1; xSendLoop++ ) + { + xMode = ( tcptestEchoTestModes_t ) ( xSendLoop % tcptestMAX_ECHO_TEST_MODES ); /* % should be optimized to simple masking since only 4 modes are present.*/ + /* Using % to avoid bug in case a new state is unknowingly added. */ + + vTaskPrioritySet( NULL, tcptestECHO_TEST_HIGH_PRIORITY ); + xMaxBufferSize = tcptestTWICE_MAX_FRAME_SIZE; + + /* Set low priority if requested . */ + if( ( xMode == LARGE_BUFFER_LOW_PRIORITY ) || ( xMode == SMALL_BUFFER_LOW_PRIORITY ) ) + { + vTaskPrioritySet( NULL, tcptestECHO_TEST_LOW_PRIORITY ); + } + + /* Set buffer size to 1 if requested. */ + if( ( xMode == SMALL_BUFFER_HIGH_PRIORITY ) || ( xMode == SMALL_BUFFER_LOW_PRIORITY ) ) + { + xMaxBufferSize = 1; + } + + /* Wait for the Rx task to create and connect the socket. */ + if( xEventGroupSync( xSyncEventGroup, /* The event group used for the rendezvous. */ + tcptestTX_TASK_BIT, /* The bit representing the Tx task reaching the rendezvous. */ + ( tcptestTX_TASK_BIT | tcptestRX_TASK_BIT ), /* Also wait for the Rx task. */ + tcptestECHO_TEST_SYNC_TIMEOUT_TICKS ) != ( tcptestTX_TASK_BIT | tcptestRX_TASK_BIT ) ) + { + break; + } + + xTransmitted = 0; + xStatus = pdTRUE; + + /* Keep sending until the entire buffer has been sent. */ + while( xTransmitted < tcptestTWICE_MAX_FRAME_SIZE ) + { + /* How many bytes are left to send? Attempt to send them + * all at once (so the length is potentially greater than the + * MSS). */ + xLenToSend = tcptestTWICE_MAX_FRAME_SIZE - xTransmitted; + + /* Every loop switch the size of the packet from maximum to smallest. */ + if( xLenToSend > xMaxBufferSize ) + { + xLenToSend = xMaxBufferSize; + } + + xReturned = FreeRTOS_send( xSocket, /* The socket being sent to. */ + ( void * ) &( cTransmittedString[ xTransmitted ] ), /* The data being sent. */ + xLenToSend, /* The length of the data being sent. */ + 0 ); /* ulFlags. */ + + if( xReturned >= 0 ) + { + /* Data was sent successfully. */ + xTransmitted += xReturned; + } + else + { + xStatus = pdFAIL; + break; + } + } + + /* Wait for the Rx task to recognize the socket is closing and stop + * using it. */ + + if( xEventGroupSync( xSyncEventGroup, /* The event group used for the rendezvous. */ + tcptestTX_TASK_BIT, /* The bit representing the Tx task reaching the rendezvous. */ + ( tcptestTX_TASK_BIT | tcptestRX_TASK_BIT ), /* Also wait for the Rx task. */ + tcptestECHO_TEST_SYNC_TIMEOUT_TICKS ) != ( tcptestTX_TASK_BIT | tcptestRX_TASK_BIT ) ) + { + xStatus = pdFAIL; + } + + if( xStatus == pdFAIL ) + { + break; + } + } + + vTaskSuspend( NULL ); /* Delete this task. */ +} + +/*-----------------------------------------------------------*/ + + +/** @brief This test will create x tasks that will send and receive to an + * echo server on different socket at the same time. + */ +void prvStartTCPEchoClientTasks_DifferentSockets( void ) +{ + uint16_t usIndex; + tcptestEchoClientsTaskParams_t xTcptestEchoClientsTaskParams[ tcptestNUM_ECHO_CLIENTS ]; + uint32_t ulEventMask; + volatile BaseType_t xSyncEventGroupAllocated = pdFALSE; + BaseType_t xResult; + + if( TEST_PROTECT() ) + { + /* Create the event group used by the Tx and Rx tasks to synchronize prior + * to commencing a cycle using a new socket. */ + xSyncEventGroup = xEventGroupCreate(); + configASSERT( xSyncEventGroup ); + xSyncEventGroupAllocated = pdTRUE; + + /* Create the echo client tasks. */ + for( usIndex = 0; usIndex < tcptestNUM_ECHO_CLIENTS; usIndex++ ) + { + xTcptestEchoClientsTaskParams[ usIndex ].usTaskTag = usIndex; + xTcptestEchoClientsTaskParams[ usIndex ].xResult = FREERTOS_SOCKET_ERROR; + + xResult = xTaskCreate( prvThreadSafeDifferentSocketsDifferentTasks, /* The function that implements the task. */ + "ClientTask", /* Just a text name for the task to aid debugging. */ + tcptestTCP_ECHO_TASKS_STACK_SIZE, /* The stack size is defined in FreeRTOSIPConfig.h. */ + &( xTcptestEchoClientsTaskParams[ usIndex ] ), /* The task parameter, not used in this case. */ + tcptestTCP_ECHO_TASKS_PRIORITY, /* The priority assigned to the task is defined in FreeRTOSConfig.h. */ + &( xTcptestEchoClientsTaskParams[ usIndex ].xTaskHandle ) ); /* The task handle is not used. */ + TEST_ASSERT_EQUAL_MESSAGE( pdPASS, xResult, "Task creation failed" ); + } + + ulEventMask = xEventGroupSync( xSyncEventGroup, /* The event group used for the rendezvous. */ + 0, + tcptestECHO_CLIENT_EVENT_MASK, + tcptestECHO_TEST_SYNC_TIMEOUT_TICKS ); + + /* For each task not completed, delete the task. */ + for( usIndex = 0; usIndex < tcptestNUM_ECHO_CLIENTS; usIndex++ ) + { + if( ( ulEventMask & ( 1 << usIndex ) ) == 0 ) + { + vTaskDelete( xTcptestEchoClientsTaskParams[ usIndex ].xTaskHandle ); + } + } + + for( usIndex = 0; usIndex < tcptestNUM_ECHO_CLIENTS; usIndex++ ) + { + TEST_ASSERT_EQUAL_MESSAGE( pdFREERTOS_ERRNO_NONE, + xTcptestEchoClientsTaskParams[ usIndex ].xResult, + "Check iot_secure_sockets.h for error code" ); + } + } + + if( xSyncEventGroupAllocated == pdTRUE ) + { + vEventGroupDelete( xSyncEventGroup ); + } +} + + +TEST( Full_TCP, TCP_Threadsafe_DifferentSocketsDifferentTasks ) +{ + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + prvStartTCPEchoClientTasks_DifferentSockets(); +} + +/*-----------------------------------------------------------*/ + +static void prvThreadSafeDifferentSocketsDifferentTasks( void * pvParameters ) +{ + Socket_t xTaskSocket = FREERTOS_INVALID_SOCKET; + int32_t lLoopCount = 0UL; + BaseType_t xReceivedBytes, xReturned; + BaseType_t xTransmitted; + char * pcReceivedString; + BaseType_t xResult = FREERTOS_SOCKET_ERROR; + BaseType_t xReceivedStringAllocated = pdFALSE; + BaseType_t xSocketOpenLocal = pdFALSE; + tcptestEchoClientsTaskParams_t * pxTcptestEchoClientsTaskParams; + + pxTcptestEchoClientsTaskParams = ( ( tcptestEchoClientsTaskParams_t * ) pvParameters ); + + pcReceivedString = pvPortMalloc( ipconfigTCP_MSS * sizeof( char ) ); + + if( pcReceivedString != NULL ) + { + xReceivedStringAllocated = pdTRUE; + } + else + { + xResult = FREERTOS_SOCKET_ERROR; + tcptestFAILUREPRINTF( ( "%s: Task %d failed to alloc memory \r\n", + __FUNCTION__, + ( int ) pxTcptestEchoClientsTaskParams->usTaskTag ) ); + } + + if( pcReceivedString != NULL ) + { + /* Send a number of echo requests. */ + for( lLoopCount = 0; lLoopCount < tcptestMAX_LOOPS_ECHO_CLIENTS_LOOP; lLoopCount++ ) + { + /* Attempt to establish the requested connection. */ + xResult = prvConnectHelperWithRetry( &xTaskSocket, + xEchoTestRxTxTimeOut, + xEchoTestRxTxTimeOut, + &xSocketOpenLocal); + + if( xResult != pdFREERTOS_ERRNO_NONE ) + { + tcptestFAILUREPRINTF( ( "%s: Task %d failed to connect with error code %d on loop %d \r\n", + __FUNCTION__, + xResult, + lLoopCount, + ( int ) pxTcptestEchoClientsTaskParams->usTaskTag ) ); + break; + } + + /* Send the string to the socket. */ + xTransmitted = FreeRTOS_send( xTaskSocket, /* The socket being sent to. */ + ( void * ) cTransmittedString, /* The data being sent. */ + ipconfigTCP_MSS, /* The length of the data being sent. */ + 0 ); /* No flags. */ + + if( xTransmitted < ipconfigTCP_MSS ) + { + tcptestFAILUREPRINTF( ( "%s: Task %d error %ld while transmitting data\r\n", + __FUNCTION__, + ( int ) pxTcptestEchoClientsTaskParams->usTaskTag, + xTransmitted ) ); + xResult = FREERTOS_SOCKET_ERROR; + break; + } + + /* Clear the buffer into which the echoed string will be + * placed. */ + xReceivedBytes = 0; + + /* Receive data echoed back to the socket. */ + while( xReceivedBytes < xTransmitted ) + { + xReturned = FreeRTOS_recv( xTaskSocket, /* The socket being received from. */ + &( pcReceivedString[ xReceivedBytes ] ), /* The buffer into which the received data will be written. */ + ipconfigTCP_MSS - xReceivedBytes, /* The size of the buffer provided to receive the data. */ + 0 ); /* No flags. */ + + if( xReturned <= 0 ) + { + break; + } + + xReceivedBytes += xReturned; + } + + /* If an error occurred it will be latched in xReceivedBytes, + * otherwise xReceived bytes will be just that - the number of + * bytes received from the echo server. */ + if( xReceivedBytes == ipconfigTCP_MSS ) + { + /* Compare the transmitted string to the received string. */ + if( strncmp( pcReceivedString, cTransmittedString, xTransmitted ) != 0 ) + { + tcptestFAILUREPRINTF( ( "%s: Task %d error while receiving data \r\n", + __FUNCTION__, + ( int ) pxTcptestEchoClientsTaskParams->usTaskTag ) ); + xResult = FREERTOS_SOCKET_ERROR; + break; + } + } + else + { + tcptestFAILUREPRINTF( ( "%s: Task %d error not enough bytes received \r\n", + __FUNCTION__, + ( int ) pxTcptestEchoClientsTaskParams->usTaskTag ) ); + xResult = FREERTOS_SOCKET_ERROR; + break; + } + + /* Close this socket before looping back to create another. */ + ( void ) prvShutdownHelper( xTaskSocket ); + ( void ) prvCloseHelper( xTaskSocket, &xSocketOpenLocal); + } + } + + /* Free all dynamic memory. */ + if( xReceivedStringAllocated == pdTRUE ) + { + vPortFree( pcReceivedString ); + } + + if( xSocketOpenLocal == pdTRUE ) + { + ( void ) prvCloseHelper( xTaskSocket, &xSocketOpenLocal ); + } + + pxTcptestEchoClientsTaskParams->xResult = xResult; + + /* Don't wait, just flag it reached that point. */ + xEventGroupSync( xSyncEventGroup, /* The event group used for the rendezvous. */ + ( 1 << pxTcptestEchoClientsTaskParams->usTaskTag ), + tcptestECHO_CLIENT_EVENT_MASK, + tcptestECHO_TEST_SYNC_TIMEOUT_TICKS ); + + + vTaskDelete( NULL ); /* Delete this task. */ +} + +/*-----------------------------------------------------------*/ + +TEST( Full_TCP, TCP_htons_HappyCase ) +{ + uint16_t usNetworkOrderValue; + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + /* Convert the host order value to network order + * value. */ + usNetworkOrderValue = FreeRTOS_htons( 0x1234 ); + + #if defined(ipconfigBYTE_ORDER) && ( ipconfigBYTE_ORDER == pdFREERTOS_LITTLE_ENDIAN ) + + /* If the platform we are running on, is little + * endian, bytes must have been swapped. */ + TEST_ASSERT_EQUAL_INT16_MESSAGE( 0x3412, usNetworkOrderValue, "FreeRTOS_htons returned incorrect value." ); + #else + + /* If the platform we are running on, is big + * endian, the output value must be same as + * the input value. */ + TEST_ASSERT_EQUAL_INT16_MESSAGE( 0x1234, usNetworkOrderValue, "FreeRTOS_htons returned incorrect value." ); + #endif + + tcptestPRINTF( ( "%s complete.\r\n", __FUNCTION__ ) ); +} +/*-----------------------------------------------------------*/ + +TEST( Full_TCP, TCP_test_dns_multiple_addresses ) +{ + BaseType_t xResult = pdFAIL; + uint32_t i; + uint32_t j; + uint32_t ulIPAddress; + uint32_t ulUnique; + uint32_t ulNumUniqueIPAddresses = 0; + + /* Resolve "freertos.org", which will have multiple IP addresses */ + + uint32_t ulIPAddresses[ dnstestNUM_UNIQUE_IP_ADDRESSES ] = { 0UL }; + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + /* + * Resolve the endpoint to an array of IP addresses. Each subsequent + * call will return one of the addresses which the name resolves to. + * + * NOTE: Resolving addresses can take some time, so allow up to + * 60 seconds to collect all of them. + */ + for( i = 0; ( i < 60 ) && ( ulNumUniqueIPAddresses < dnstestNUM_UNIQUE_IP_ADDRESSES ); i++ ) + { + ulIPAddress = FreeRTOS_gethostbyname( HostNameUNIQUE_ADDRESSES_TEST ); + + for( j = 0, ulUnique = 1; j < ulNumUniqueIPAddresses; j++ ) + { + if( ulIPAddresses[ j ] == ulIPAddress ) + { + ulUnique = 0; + } + } + + if( ( ulUnique == 1 ) && ( ulNumUniqueIPAddresses < dnstestNUM_UNIQUE_IP_ADDRESSES ) ) + { + ulIPAddresses[ ulNumUniqueIPAddresses++ ] = ulIPAddress; + } + + vTaskDelay( 1000 / portTICK_PERIOD_MS ); + } + + tcptestPRINTF( ( "%s: identified %d different IP addresses for %s.\r\n", + __FUNCTION__, + ulNumUniqueIPAddresses, + HostNameUNIQUE_ADDRESSES_TEST ) ); + + /* Require a minimum number of IP addresses for AWS IoT Core endpoints */ + if( ulNumUniqueIPAddresses >= dnstestNUM_UNIQUE_IP_ADDRESSES ) + { + xResult = pdPASS; + } + TEST_ASSERT_EQUAL_UINT32_MESSAGE( pdPASS, xResult, "Less number of IP addresses per entry than expected\n" ); + + tcptestPRINTF( ( "%s complete.\r\n", __FUNCTION__ ) ); +} + +/*-----------------------------------------------------------*/ + +TEST( Full_TCP, TCP_inet_addr_quick_HappyCase ) +{ + uint32_t ulPackedIpAddress; + + tcptestPRINTF( ( "Starting %s.\r\n", __FUNCTION__ ) ); + + ulPackedIpAddress = FreeRTOS_inet_addr_quick( 192, 168, 2, 6 ); + + #if defined(ipconfigBYTE_ORDER) && ( ipconfigBYTE_ORDER == pdFREERTOS_LITTLE_ENDIAN ) + + /* The expected return value of FreeRTOS_inet_addr_quick + * on a little endian platform must be same as the correct + * hand calculated value. */ + TEST_ASSERT_EQUAL_INT32_MESSAGE( 0x0602A8C0, ulPackedIpAddress, "FreeRTOS_inet_addr_quick returned incorrect value." ); + #else + + /* The expected return value of FreeRTOS_inet_addr_quick + * on a big endian platform must be same as the correct + * hand calculated value. */ + TEST_ASSERT_EQUAL_INT32_MESSAGE( 0xC0A80206, ulPackedIpAddress, "FreeRTOS_inet_addr_quick returned incorrect value." ); + #endif + + tcptestPRINTF( ( "%s complete.\r\n", __FUNCTION__ ) ); +} + +/* TODO: Investigate tests for loopback, other reserved IP addresses */ +/* TODO: Implement tests with a bad TCP connection (dropped packets, repeated packets, connection refused etc */ +/* TODO: Implement tests that have memory allocation errors (freertos heap is full) */ +/*-------------------------------------------------------------------*/ +/*-----------------------End Tests-----------------------------------*/ +/*-------------------------------------------------------------------*/ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Runner/test_runner.c b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Runner/test_runner.c new file mode 100644 index 0000000000..926e9b0b21 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Runner/test_runner.c @@ -0,0 +1,108 @@ +/* + * FreeRTOS V202002.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +/** + * @file aws_test_runner.c + * @brief The function to be called to run all the tests. + */ + +/* Test runner interface includes. */ +#include "test_runner.h" + +/* FreeRTOS includes. */ +#include "FreeRTOS.h" +#include "task.h" + +/* Unity framework includes. */ +#include "unity_fixture.h" +#include "unity_internals.h" + +char cBuffer[ testrunnerBUFFER_SIZE ]; + +/* Heap leak variables. */ +unsigned int xHeapBefore; +unsigned int xHeapAfter; +/*-----------------------------------------------------------*/ + +/* This function will be generated by the test automation framework, + * do not change the signature of it. You could, however, add or remove + * RUN_TEST_GROUP statements. + */ +static void RunTests( void ) +{ + RUN_TEST_GROUP( Full_TCP ); +} +/*-----------------------------------------------------------*/ + +void TEST_RUNNER_RunTests_task( void * pvParameters ) +{ + /* Disable unused parameter warning. */ + ( void ) pvParameters; + + /* Initialize unity. */ + UnityFixture.Verbose = 1; + UnityFixture.GroupFilter = 0; + UnityFixture.NameFilter = testrunnerTEST_FILTER; + UnityFixture.RepeatCount = 1; + + UNITY_BEGIN(); + + /* Give the print buffer time to empty */ + vTaskDelay( pdMS_TO_TICKS( 500 ) ); + /* Measure the heap size before any tests are run. */ + #if ( testrunnerFULL_MEMORYLEAK_ENABLED == 1 ) + xHeapBefore = xPortGetFreeHeapSize(); + #endif + + RunTests(); + + #if ( testrunnerFULL_MEMORYLEAK_ENABLED == 1 ) + + /* Measure the heap size after tests are done running. + * This test must run last. */ + + /* Perform any global resource cleanup necessary to avoid memory leaks. */ + #ifdef testrunnerMEMORYLEAK_CLEANUP + testrunnerMEMORYLEAK_CLEANUP(); + #endif + + /* Give the print buffer time to empty */ + vTaskDelay( pdMS_TO_TICKS( 500 ) ); + xHeapAfter = xPortGetFreeHeapSize(); + RUN_TEST_GROUP( Full_MemoryLeak ); + #endif /* if ( testrunnerFULL_MEMORYLEAK_ENABLED == 1 ) */ + + /* Currently disabled. Will be enabled after cleanup. */ + UNITY_END(); + + #ifdef CODE_COVERAGE + exit( 0 ); + #endif + + /* This task has finished. FreeRTOS does not allow a task to run off the + * end of its implementing function, so the task must be deleted. */ + vTaskDelete( NULL ); +} +/*-----------------------------------------------------------*/ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Runner/test_runner_config.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Runner/test_runner_config.h new file mode 100644 index 0000000000..fc43a0fc6d --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/Test_Code/Test_Runner/test_runner_config.h @@ -0,0 +1,74 @@ +/* + * FreeRTOS V1.1.4 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + +#ifndef AWS_TEST_RUNNER_CONFIG_H +#define AWS_TEST_RUNNER_CONFIG_H + + /* Uncomment this line if you want to run DQP_FR tests only. */ + /* #define testrunnerAFQP_ENABLED */ + +#define testrunnerUNSUPPORTED 0 + +/* Unsupported tests. */ +#define testrunnerFULL_WIFI_ENABLED testrunnerUNSUPPORTED +#define testrunnerFULL_BLE_ENABLED testrunnerUNSUPPORTED +#define testrunnerFULL_BLE_END_TO_END_TEST_ENABLED testrunnerUNSUPPORTED + +/* Supported tests. 0 = Disabled, 1 = Enabled */ +#define testrunnerFULL_TASKPOOL_ENABLED 0 +#define testrunnerFULL_CRYPTO_ENABLED 0 +#define testrunnerFULL_FREERTOS_TCP_ENABLED 0 +#define testrunnerFULL_DEFENDER_ENABLED 0 +#define testrunnerFULL_GGD_ENABLED 0 +#define testrunnerFULL_GGD_HELPER_ENABLED 0 +#define testrunnerFULL_MQTT_AGENT_ENABLED 0 +#define testrunnerFULL_MQTT_ALPN_ENABLED 0 +#define testrunnerFULL_MQTT_STRESS_TEST_ENABLED 0 +#define testrunnerFULL_MQTTv4_ENABLED 0 +#define testrunnerFULL_PKCS11_ENABLED 0 +#define testrunnerFULL_PKCS11_MODEL_ENABLED 0 +#define testrunnerFULL_POSIX_ENABLED 0 +#define testrunnerFULL_SHADOW_ENABLED 0 +#define testrunnerFULL_SHADOWv4_ENABLED 0 +#define testrunnerFULL_TCP_ENABLED 1 +#define testrunnerFULL_TLS_ENABLED 0 +#define testrunnerFULL_MEMORYLEAK_ENABLED 0 +#define testrunnerFULL_OTA_CBOR_ENABLED 0 +#define testrunnerFULL_OTA_AGENT_ENABLED 0 +#define testrunnerFULL_OTA_PAL_ENABLED 0 +#define testrunnerFULL_SERIALIZER_ENABLED 0 +#define testrunnerUTIL_PLATFORM_CLOCK_ENABLED 0 +#define testrunnerUTIL_PLATFORM_THREADS_ENABLED 0 +#define testrunnerFULL_HTTPS_CLIENT_ENABLED 0 + +/* On systems using FreeRTOS+TCP (such as this one) the TCP segments must be + * cleaned up before running the memory leak check. */ +#if ( testrunnerFULL_MEMORYLEAK_ENABLED == 1 ) +extern void vTCPSegmentCleanup(); +#define testrunnerMEMORYLEAK_CLEANUP() vTCPSegmentCleanup() +#endif + +#endif /* AWS_TEST_RUNNER_CONFIG_H */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WIN32.vcxproj b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WIN32.vcxproj new file mode 100644 index 0000000000..26fbc83398 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WIN32.vcxproj @@ -0,0 +1,227 @@ + + + + + Debug + Win32 + + + Release + Win32 + + + + {C686325E-3261-42F7-AEB1-DDE5280E1CEB} + Full-TCP + 10.0 + + + + Application + false + MultiByte + v142 + + + Application + false + MultiByte + v142 + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30319.1 + Debug\ + Debug\ + true + .\Release\ + .\Release\ + false + AllRules.ruleset + + + ..\..\Source\FreeRTOS-Plus-TCP\test;C:\Program Files (x86)\Windows Kits\10\Include\10.0.18362.0\um\;..\CMock\vendor\unity\extras\memory\src;..\CMock\vendor\unity\extras\fixture\src;..\CMock\vendor\unity\src;.;$(IncludePath) + ..\CMock\vendor\unity\extras\memory\src;..\CMock\vendor\unity\extras\fixture\src;..\CMock\vendor\unity\src;$(SourcePath) + + + + .\Debug/WIN32.tlb + + + + + Disabled + .\Logging;.\Config;.\Test_Code\Test_Cases\include;..\..\..\CMock\vendor\unity\extras\fixture\src;..\..\..\..\Source\FreeRTOS-Plus-FAT\include;..\..\..\..\Source\FreeRTOS-Plus-FAT\portable\common;..\..\..\..\Source\FreeRTOS-Plus-TCP\protocols\include;..\..\..\..\Source\FreeRTOS-Plus-TCP\portable\BufferManagement;..\..\..\..\Source\FreeRTOS-Plus-TCP\portable\Compiler\MSVC;..\..\..\..\Source\FreeRTOS-Plus-TCP\include;..\..\..\CMock\vendor\unity\extras\memory\src;.\DemoTasks\include;.\WinPCap;..\..\..\..\..\FreeRTOS\Source\include;..\..\..\..\..\FreeRTOS\Source\portable\MSVC-MingW;..\..\..\..\Source\FreeRTOS-Plus-CLI;..\..\..\CMock\vendor\unity\src;.\TraceMacros\Example1;.;%(AdditionalIncludeDirectories) + WIN32;_DEBUG;_CONSOLE;_WIN32_WINNT=0x0600;WINVER=0x400;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions) + true + EnableFastChecks + MultiThreadedDLL + .\Debug/WIN32.pch + .\Debug/ + .\Debug/ + .\Debug/ + Level4 + true + false + EditAndContinue + /wd4210 /wd4127 /wd4214 /wd4201 /wd4244 /wd4310 %(AdditionalOptions) + true + NotUsing + false + CompileAsC + + + _DEBUG;%(PreprocessorDefinitions) + 0x0c09 + + + .\Debug/Full-TCP.exe + true + true + .\Debug/WIN32.pdb + Console + MachineX86 + wpcap.lib;%(AdditionalDependencies) + .\WinPCap + false + + + true + .\Debug/WIN32.bsc + + + + + .\Release/WIN32.tlb + + + + + MaxSpeed + OnlyExplicitInline + _WINSOCKAPI_;WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions) + true + MultiThreaded + true + .\Release/WIN32.pch + .\Release/ + .\Release/ + .\Release/ + Level3 + true + ..\Common\Utils;..\Common\ethernet\lwip-1.4.0\ports\win32\WinPCap;..\Common\ethernet\lwip-1.4.0\src\include\ipv4;..\Common\ethernet\lwip-1.4.0\src\include;..\..\Source\include;..\..\Source\portable\MSVC-MingW;..\Common\ethernet\lwip-1.4.0\ports\win32\include;..\Common\Include;.\lwIP_Apps;.;%(AdditionalIncludeDirectories) + + + NDEBUG;%(PreprocessorDefinitions) + 0x0c09 + + + .\Release/RTOSDemo.exe + true + .\Release/WIN32.pdb + Console + MachineX86 + ..\Common\ethernet\lwip-1.4.0\ports\win32\WinPCap + wpcap.lib;%(AdditionalDependencies) + + + true + .\Release/WIN32.bsc + + + + + + + + + + + + + + + + + + + + + + + + + + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WIN32.vcxproj.filters b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WIN32.vcxproj.filters new file mode 100644 index 0000000000..f615832749 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WIN32.vcxproj.filters @@ -0,0 +1,261 @@ + + + + + {38712199-cebf-4124-bf15-398f7c3419ea} + ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe + + + {af3445a1-4908-4170-89ed-39345d90d30c} + + + {f32be356-4763-4cae-9020-974a2638cb08} + *.c + + + {88f409e6-d396-4ac5-94bd-7a99c914be46} + + + {e5ad4ec7-23dc-4295-8add-2acaee488f5a} + + + {d2dcd641-8d91-492b-852f-5563ffadaec6} + + + {8672fa26-b119-481f-8b8d-086419c01a3e} + + + {4570be11-ec96-4b55-ac58-24b50ada980a} + + + {5d93ed51-023a-41ad-9243-8d230165d34b} + + + {fdabc401-4468-412c-8dc1-0e366fcdbec1} + + + {623bd581-b971-47af-b62c-ac19b71a44c1} + + + {eff6eadc-8f72-4484-807b-6d25a2628276} + + + {8443e065-8092-4050-b78d-136c6f166a87} + + + + + + FreeRTOS\Source\Portable + + + FreeRTOS\Source\Portable + + + FreeRTOS\Source + + + FreeRTOS\Source + + + FreeRTOS\Source + + + FreeRTOS\Source + + + FreeRTOS\Source + + + FreeRTOS+\FreeRTOS+TCP\portable + + + FreeRTOS+\FreeRTOS+TCP\portable + + + FreeRTOS+\FreeRTOS+TCP + + + FreeRTOS+\FreeRTOS+TCP + + + FreeRTOS+\FreeRTOS+TCP + + + FreeRTOS+\FreeRTOS+TCP + + + FreeRTOS+\FreeRTOS+TCP + + + FreeRTOS+\FreeRTOS+TCP + + + FreeRTOS+\FreeRTOS+TCP + + + FreeRTOS+\FreeRTOS+TCP + + + FreeRTOS+\FreeRTOS+TCP + + + Tests + + + Tests + + + Tests + + + Tests + + + Unity + + + Unity + + + Unity + + + + Application Code + + + Tests + + + + + FreeRTOS\Source\include + + + FreeRTOS\Source\include + + + FreeRTOS\Source\include + + + FreeRTOS\Source\include + + + FreeRTOS\Source\include + + + FreeRTOS\Source\include + + + FreeRTOS\Source\include + + + FreeRTOS\Source\include + + + FreeRTOS\Source\include + + + FreeRTOS\Source\include + + + FreeRTOS\Source\Portable + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + FreeRTOS+\FreeRTOS+TCP\include + + + Tests\include + + + Tests\include + + + Tests\include + + + Tests\include + + + Tests\include + + + Tests\include + + + Tests\include + + + Tests\include + + + Tests\include + + + Unity + + + Unity + + + Unity + + + Unity + + + Unity + + + + + \ No newline at end of file diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WIN32.vcxproj.user b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WIN32.vcxproj.user new file mode 100644 index 0000000000..88a550947e --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WIN32.vcxproj.user @@ -0,0 +1,4 @@ + + + + \ No newline at end of file diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/Packet32.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/Packet32.h new file mode 100644 index 0000000000..64be055d96 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/Packet32.h @@ -0,0 +1,359 @@ +/* + * Copyright (c) 1999 - 2005 NetGroup, Politecnico di Torino (Italy) + * Copyright (c) 2005 - 2007 CACE Technologies, Davis (California) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Politecnico di Torino, CACE Technologies + * nor the names of its contributors may be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/** @ingroup packetapi + * @{ + */ + +/** @defgroup packet32h Packet.dll definitions and data structures + * Packet32.h contains the data structures and the definitions used by packet.dll. + * The file is used both by the Win9x and the WinNTx versions of packet.dll, and can be included + * by the applications that use the functions of this library + * @{ + */ + +#ifndef __PACKET32 +#define __PACKET32 + +#include + +#ifdef HAVE_AIRPCAP_API +#include +#else +#if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_) +#define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ +typedef struct _AirpcapHandle *PAirpcapHandle; +#endif /* AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ */ +#endif /* HAVE_AIRPCAP_API */ + +#ifdef HAVE_DAG_API +#include +#endif /* HAVE_DAG_API */ + +// Working modes +#define PACKET_MODE_CAPT 0x0 ///< Capture mode +#define PACKET_MODE_STAT 0x1 ///< Statistical mode +#define PACKET_MODE_MON 0x2 ///< Monitoring mode +#define PACKET_MODE_DUMP 0x10 ///< Dump mode +#define PACKET_MODE_STAT_DUMP MODE_DUMP | MODE_STAT ///< Statistical dump Mode + + +/// Alignment macro. Defines the alignment size. +#define Packet_ALIGNMENT sizeof(int) +/// Alignment macro. Rounds up to the next even multiple of Packet_ALIGNMENT. +#define Packet_WORDALIGN(x) (((x)+(Packet_ALIGNMENT-1))&~(Packet_ALIGNMENT-1)) + +#define NdisMediumNull -1 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumCHDLC -2 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumPPPSerial -3 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumBare80211 -4 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumRadio80211 -5 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumPpi -6 ///< Custom linktype: NDIS doesn't provide an equivalent + +// Loopback behaviour definitions +#define NPF_DISABLE_LOOPBACK 1 ///< Drop the packets sent by the NPF driver +#define NPF_ENABLE_LOOPBACK 2 ///< Capture the packets sent by the NPF driver + +/*! + \brief Network type structure. + + This structure is used by the PacketGetNetType() function to return information on the current adapter's type and speed. +*/ +typedef struct NetType +{ + UINT LinkType; ///< The MAC of the current network adapter (see function PacketGetNetType() for more information) + ULONGLONG LinkSpeed; ///< The speed of the network in bits per second +}NetType; + + +//some definitions stolen from libpcap + +#ifndef BPF_MAJOR_VERSION + +/*! + \brief A BPF pseudo-assembly program. + + The program will be injected in the kernel by the PacketSetBPF() function and applied to every incoming packet. +*/ +struct bpf_program +{ + UINT bf_len; ///< Indicates the number of instructions of the program, i.e. the number of struct bpf_insn that will follow. + struct bpf_insn *bf_insns; ///< A pointer to the first instruction of the program. +}; + +/*! + \brief A single BPF pseudo-instruction. + + bpf_insn contains a single instruction for the BPF register-machine. It is used to send a filter program to the driver. +*/ +struct bpf_insn +{ + USHORT code; ///< Instruction type and addressing mode. + UCHAR jt; ///< Jump if true + UCHAR jf; ///< Jump if false + int k; ///< Generic field used for various purposes. +}; + +/*! + \brief Structure that contains a couple of statistics values on the current capture. + + It is used by packet.dll to return statistics about a capture session. +*/ +struct bpf_stat +{ + UINT bs_recv; ///< Number of packets that the driver received from the network adapter + ///< from the beginning of the current capture. This value includes the packets + ///< lost by the driver. + UINT bs_drop; ///< number of packets that the driver lost from the beginning of a capture. + ///< Basically, a packet is lost when the the buffer of the driver is full. + ///< In this situation the packet cannot be stored and the driver rejects it. + UINT ps_ifdrop; ///< drops by interface. XXX not yet supported + UINT bs_capt; ///< number of packets that pass the filter, find place in the kernel buffer and + ///< thus reach the application. +}; + +/*! + \brief Packet header. + + This structure defines the header associated with every packet delivered to the application. +*/ +struct bpf_hdr +{ + struct timeval bh_tstamp; ///< The timestamp associated with the captured packet. + ///< It is stored in a TimeVal structure. + UINT bh_caplen; ///< Length of captured portion. The captured portion can be different + ///< from the original packet, because it is possible (with a proper filter) + ///< to instruct the driver to capture only a portion of the packets. + UINT bh_datalen; ///< Original length of packet + USHORT bh_hdrlen; ///< Length of bpf header (this struct plus alignment padding). In some cases, + ///< a padding could be added between the end of this structure and the packet + ///< data for performance reasons. This filed can be used to retrieve the actual data + ///< of the packet. +}; + +/*! + \brief Dump packet header. + + This structure defines the header associated with the packets in a buffer to be used with PacketSendPackets(). + It is simpler than the bpf_hdr, because it corresponds to the header associated by WinPcap and libpcap to a + packet in a dump file. This makes straightforward sending WinPcap dump files to the network. +*/ +struct dump_bpf_hdr{ + struct timeval ts; ///< Time stamp of the packet + UINT caplen; ///< Length of captured portion. The captured portion can smaller than the + ///< the original packet, because it is possible (with a proper filter) to + ///< instruct the driver to capture only a portion of the packets. + UINT len; ///< Length of the original packet (off wire). +}; + + +#endif + +struct bpf_stat; + +#define DOSNAMEPREFIX TEXT("Packet_") ///< Prefix added to the adapters device names to create the WinPcap devices +#define MAX_LINK_NAME_LENGTH 64 //< Maximum length of the devices symbolic links +#define NMAX_PACKET 65535 + +/*! + \brief Addresses of a network adapter. + + This structure is used by the PacketGetNetInfoEx() function to return the IP addresses associated with + an adapter. +*/ +typedef struct npf_if_addr { + struct sockaddr_storage IPAddress; ///< IP address. + struct sockaddr_storage SubnetMask; ///< Netmask for that address. + struct sockaddr_storage Broadcast; ///< Broadcast address. +}npf_if_addr; + + +#define ADAPTER_NAME_LENGTH 256 + 12 ///< Maximum length for the name of an adapter. The value is the same used by the IP Helper API. +#define ADAPTER_DESC_LENGTH 128 ///< Maximum length for the description of an adapter. The value is the same used by the IP Helper API. +#define MAX_MAC_ADDR_LENGTH 8 ///< Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API. +#define MAX_NETWORK_ADDRESSES 16 ///< Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API. + + +typedef struct WAN_ADAPTER_INT WAN_ADAPTER; ///< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API +typedef WAN_ADAPTER *PWAN_ADAPTER; ///< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API + +#define INFO_FLAG_NDIS_ADAPTER 0 ///< Flag for ADAPTER_INFO: this is a traditional ndis adapter +#define INFO_FLAG_NDISWAN_ADAPTER 1 ///< Flag for ADAPTER_INFO: this is a NdisWan adapter, and it's managed by WANPACKET +#define INFO_FLAG_DAG_CARD 2 ///< Flag for ADAPTER_INFO: this is a DAG card +#define INFO_FLAG_DAG_FILE 6 ///< Flag for ADAPTER_INFO: this is a DAG file +#define INFO_FLAG_DONT_EXPORT 8 ///< Flag for ADAPTER_INFO: when this flag is set, the adapter will not be listed or openend by winpcap. This allows to prevent exporting broken network adapters, like for example FireWire ones. +#define INFO_FLAG_AIRPCAP_CARD 16 ///< Flag for ADAPTER_INFO: this is an airpcap card +#define INFO_FLAG_NPFIM_DEVICE 32 + +/*! + \brief Describes an opened network adapter. + + This structure is the most important for the functioning of packet.dll, but the great part of its fields + should be ignored by the user, since the library offers functions that avoid to cope with low-level parameters +*/ +typedef struct _ADAPTER { + HANDLE hFile; ///< \internal Handle to an open instance of the NPF driver. + CHAR SymbolicLink[MAX_LINK_NAME_LENGTH]; ///< \internal A string containing the name of the network adapter currently opened. + int NumWrites; ///< \internal Number of times a packets written on this adapter will be repeated + ///< on the wire. + HANDLE ReadEvent; ///< A notification event associated with the read calls on the adapter. + ///< It can be passed to standard Win32 functions (like WaitForSingleObject + ///< or WaitForMultipleObjects) to wait until the driver's buffer contains some + ///< data. It is particularly useful in GUI applications that need to wait + ///< concurrently on several events. In Windows NT/2000 the PacketSetMinToCopy() + ///< function can be used to define the minimum amount of data in the kernel buffer + ///< that will cause the event to be signalled. + + UINT ReadTimeOut; ///< \internal The amount of time after which a read on the driver will be released and + ///< ReadEvent will be signaled, also if no packets were captured + CHAR Name[ADAPTER_NAME_LENGTH]; + PWAN_ADAPTER pWanAdapter; + UINT Flags; ///< Adapter's flags. Tell if this adapter must be treated in a different way, using the Netmon API or the dagc API. + +#ifdef HAVE_AIRPCAP_API + PAirpcapHandle AirpcapAd; +#endif // HAVE_AIRPCAP_API + +#ifdef HAVE_NPFIM_API + void* NpfImHandle; +#endif // HAVE_NPFIM_API + +#ifdef HAVE_DAG_API + dagc_t *pDagCard; ///< Pointer to the dagc API adapter descriptor for this adapter + PCHAR DagBuffer; ///< Pointer to the buffer with the packets that is received from the DAG card + struct timeval DagReadTimeout; ///< Read timeout. The dagc API requires a timeval structure + unsigned DagFcsLen; ///< Length of the frame check sequence attached to any packet by the card. Obtained from the registry + DWORD DagFastProcess; ///< True if the user requests fast capture processing on this card. Higher level applications can use this value to provide a faster but possibly unprecise capture (for example, libpcap doesn't convert the timestamps). +#endif // HAVE_DAG_API +} ADAPTER, *LPADAPTER; + +/*! + \brief Structure that contains a group of packets coming from the driver. + + This structure defines the header associated with every packet delivered to the application. +*/ +typedef struct _PACKET { + HANDLE hEvent; ///< \deprecated Still present for compatibility with old applications. + OVERLAPPED OverLapped; ///< \deprecated Still present for compatibility with old applications. + PVOID Buffer; ///< Buffer with containing the packets. See the PacketReceivePacket() for + ///< details about the organization of the data in this buffer + UINT Length; ///< Length of the buffer + DWORD ulBytesReceived; ///< Number of valid bytes present in the buffer, i.e. amount of data + ///< received by the last call to PacketReceivePacket() + BOOLEAN bIoComplete; ///< \deprecated Still present for compatibility with old applications. +} PACKET, *LPPACKET; + +/*! + \brief Structure containing an OID request. + + It is used by the PacketRequest() function to send an OID to the interface card driver. + It can be used, for example, to retrieve the status of the error counters on the adapter, its MAC address, + the list of the multicast groups defined on it, and so on. +*/ +struct _PACKET_OID_DATA { + ULONG Oid; ///< OID code. See the Microsoft DDK documentation or the file ntddndis.h + ///< for a complete list of valid codes. + ULONG Length; ///< Length of the data field + UCHAR Data[1]; ///< variable-lenght field that contains the information passed to or received + ///< from the adapter. +}; +typedef struct _PACKET_OID_DATA PACKET_OID_DATA, *PPACKET_OID_DATA; + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @} + */ + +/* +BOOLEAN QueryWinPcapRegistryStringA(CHAR *SubKeyName, + CHAR *Value, + UINT *pValueLen, + CHAR *DefaultVal); + +BOOLEAN QueryWinPcapRegistryStringW(WCHAR *SubKeyName, + WCHAR *Value, + UINT *pValueLen, + WCHAR *DefaultVal); +*/ + +//--------------------------------------------------------------------------- +// EXPORTED FUNCTIONS +//--------------------------------------------------------------------------- + +PCHAR PacketGetVersion(); +PCHAR PacketGetDriverVersion(); +BOOLEAN PacketSetMinToCopy(LPADAPTER AdapterObject,int nbytes); +BOOLEAN PacketSetNumWrites(LPADAPTER AdapterObject,int nwrites); +BOOLEAN PacketSetMode(LPADAPTER AdapterObject,int mode); +BOOLEAN PacketSetReadTimeout(LPADAPTER AdapterObject,int timeout); +BOOLEAN PacketSetBpf(LPADAPTER AdapterObject,struct bpf_program *fp); +BOOLEAN PacketSetLoopbackBehavior(LPADAPTER AdapterObject, UINT LoopbackBehavior); +INT PacketSetSnapLen(LPADAPTER AdapterObject,int snaplen); +BOOLEAN PacketGetStats(LPADAPTER AdapterObject,struct bpf_stat *s); +BOOLEAN PacketGetStatsEx(LPADAPTER AdapterObject,struct bpf_stat *s); +BOOLEAN PacketSetBuff(LPADAPTER AdapterObject,int dim); +BOOLEAN PacketGetNetType (LPADAPTER AdapterObject,NetType *type); +LPADAPTER PacketOpenAdapter(PCHAR AdapterName); +BOOLEAN PacketSendPacket(LPADAPTER AdapterObject,LPPACKET pPacket,BOOLEAN Sync); +INT PacketSendPackets(LPADAPTER AdapterObject,PVOID PacketBuff,ULONG Size, BOOLEAN Sync); +LPPACKET PacketAllocatePacket(void); +VOID PacketInitPacket(LPPACKET lpPacket,PVOID Buffer,UINT Length); +VOID PacketFreePacket(LPPACKET lpPacket); +BOOLEAN PacketReceivePacket(LPADAPTER AdapterObject,LPPACKET lpPacket,BOOLEAN Sync); +BOOLEAN PacketSetHwFilter(LPADAPTER AdapterObject,ULONG Filter); +BOOLEAN PacketGetAdapterNames(PTSTR pStr,PULONG BufferSize); +BOOLEAN PacketGetNetInfoEx(PCHAR AdapterName, npf_if_addr* buffer, PLONG NEntries); +BOOLEAN PacketRequest(LPADAPTER AdapterObject,BOOLEAN Set,PPACKET_OID_DATA OidData); +HANDLE PacketGetReadEvent(LPADAPTER AdapterObject); +BOOLEAN PacketSetDumpName(LPADAPTER AdapterObject, void *name, int len); +BOOLEAN PacketSetDumpLimits(LPADAPTER AdapterObject, UINT maxfilesize, UINT maxnpacks); +BOOLEAN PacketIsDumpEnded(LPADAPTER AdapterObject, BOOLEAN sync); +BOOL PacketStopDriver(); +VOID PacketCloseAdapter(LPADAPTER lpAdapter); +BOOLEAN PacketStartOem(PCHAR errorString, UINT errorStringLength); +BOOLEAN PacketStartOemEx(PCHAR errorString, UINT errorStringLength, ULONG flags); +PAirpcapHandle PacketGetAirPcapHandle(LPADAPTER AdapterObject); + +// +// Used by PacketStartOemEx +// +#define PACKET_START_OEM_NO_NETMON 0x00000001 + +#ifdef __cplusplus +} +#endif + +#endif //__PACKET32 diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/PacketData.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/PacketData.h new file mode 100644 index 0000000000..dd3d225e48 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/PacketData.h @@ -0,0 +1,270 @@ +char pkt1[] = { +0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14, +0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00, +0x00, 0x30, 0x09, 0x9c, 0x40, 0x00, 0x80, 0x06, +0x6f, 0x07, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8, +0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7, +0xc7, 0x35, 0x00, 0x00, 0x00, 0x00, 0x70, 0x02, +0x40, 0x00, 0xdf, 0xab, 0x00, 0x00, 0x02, 0x04, +0x05, 0xb4, 0x01, 0x01, 0x04, 0x02 }; + +char pkt2[] = { +0x00, 0x14, 0x22, 0xcb, 0x18, 0x2d, 0x00, 0x01, +0x02, 0x45, 0x09, 0x11, 0x08, 0x00, 0x45, 0x00, +0x00, 0x2c, 0x00, 0x01, 0x00, 0x00, 0x40, 0x06, +0xf8, 0xa6, 0xc0, 0xa8, 0x00, 0x0c, 0xc0, 0xa8, +0x00, 0xc8, 0x00, 0x50, 0x0f, 0xe2, 0x00, 0x00, +0x06, 0x68, 0x09, 0xe7, 0xc7, 0x36, 0x60, 0x12, +0x05, 0x92, 0x28, 0xca, 0x00, 0x00, 0x02, 0x04, +0x05, 0x92 }; + +char pkt3[] = { +0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14, +0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00, +0x00, 0x28, 0x09, 0x9e, 0x40, 0x00, 0x80, 0x06, +0x6f, 0x0d, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8, +0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7, +0xc7, 0x36, 0x00, 0x00, 0x06, 0x69, 0x50, 0x10, +0x42, 0xd8, 0x82, 0x3f, 0x00, 0x00 }; + +char pkt4[] = { +0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14, +0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00, +0x02, 0x27, 0x09, 0x9f, 0x40, 0x00, 0x80, 0x06, +0x6d, 0x0d, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8, +0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7, +0xc7, 0x36, 0x00, 0x00, 0x06, 0x69, 0x50, 0x18, +0x42, 0xd8, 0x84, 0x3e, 0x00, 0x00, 0x47, 0x45, +0x54, 0x20, 0x2f, 0x20, 0x48, 0x54, 0x54, 0x50, +0x2f, 0x31, 0x2e, 0x31, 0x0d, 0x0a, 0x41, 0x63, +0x63, 0x65, 0x70, 0x74, 0x3a, 0x20, 0x69, 0x6d, +0x61, 0x67, 0x65, 0x2f, 0x67, 0x69, 0x66, 0x2c, +0x20, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x2f, 0x78, +0x2d, 0x78, 0x62, 0x69, 0x74, 0x6d, 0x61, 0x70, +0x2c, 0x20, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x2f, +0x6a, 0x70, 0x65, 0x67, 0x2c, 0x20, 0x69, 0x6d, +0x61, 0x67, 0x65, 0x2f, 0x70, 0x6a, 0x70, 0x65, +0x67, 0x2c, 0x20, 0x61, 0x70, 0x70, 0x6c, 0x69, +0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x2f, 0x76, +0x6e, 0x64, 0x2e, 0x6d, 0x73, 0x2d, 0x65, 0x78, +0x63, 0x65, 0x6c, 0x2c, 0x20, 0x61, 0x70, 0x70, +0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, +0x2f, 0x6d, 0x73, 0x77, 0x6f, 0x72, 0x64, 0x2c, +0x20, 0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, +0x74, 0x69, 0x6f, 0x6e, 0x2f, 0x76, 0x6e, 0x64, +0x2e, 0x6d, 0x73, 0x2d, 0x70, 0x6f, 0x77, 0x65, +0x72, 0x70, 0x6f, 0x69, 0x6e, 0x74, 0x2c, 0x20, +0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, 0x74, +0x69, 0x6f, 0x6e, 0x2f, 0x78, 0x2d, 0x6d, 0x73, +0x2d, 0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, +0x74, 0x69, 0x6f, 0x6e, 0x2c, 0x20, 0x61, 0x70, +0x70, 0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, +0x6e, 0x2f, 0x78, 0x2d, 0x6d, 0x73, 0x2d, 0x78, +0x62, 0x61, 0x70, 0x2c, 0x20, 0x61, 0x70, 0x70, +0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, +0x2f, 0x76, 0x6e, 0x64, 0x2e, 0x6d, 0x73, 0x2d, +0x78, 0x70, 0x73, 0x64, 0x6f, 0x63, 0x75, 0x6d, +0x65, 0x6e, 0x74, 0x2c, 0x20, 0x61, 0x70, 0x70, +0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, +0x2f, 0x78, 0x61, 0x6d, 0x6c, 0x2b, 0x78, 0x6d, +0x6c, 0x2c, 0x20, 0x2a, 0x2f, 0x2a, 0x0d, 0x0a, +0x41, 0x63, 0x63, 0x65, 0x70, 0x74, 0x2d, 0x4c, +0x61, 0x6e, 0x67, 0x75, 0x61, 0x67, 0x65, 0x3a, +0x20, 0x65, 0x6e, 0x2d, 0x67, 0x62, 0x0d, 0x0a, +0x41, 0x63, 0x63, 0x65, 0x70, 0x74, 0x2d, 0x45, +0x6e, 0x63, 0x6f, 0x64, 0x69, 0x6e, 0x67, 0x3a, +0x20, 0x67, 0x7a, 0x69, 0x70, 0x2c, 0x20, 0x64, +0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x0d, 0x0a, +0x55, 0x73, 0x65, 0x72, 0x2d, 0x41, 0x67, 0x65, +0x6e, 0x74, 0x3a, 0x20, 0x4d, 0x6f, 0x7a, 0x69, +0x6c, 0x6c, 0x61, 0x2f, 0x34, 0x2e, 0x30, 0x20, +0x28, 0x63, 0x6f, 0x6d, 0x70, 0x61, 0x74, 0x69, +0x62, 0x6c, 0x65, 0x3b, 0x20, 0x4d, 0x53, 0x49, +0x45, 0x20, 0x36, 0x2e, 0x30, 0x3b, 0x20, 0x57, +0x69, 0x6e, 0x64, 0x6f, 0x77, 0x73, 0x20, 0x4e, +0x54, 0x20, 0x35, 0x2e, 0x31, 0x3b, 0x20, 0x53, +0x56, 0x31, 0x3b, 0x20, 0x47, 0x6f, 0x6f, 0x67, +0x6c, 0x65, 0x54, 0x35, 0x3b, 0x20, 0x2e, 0x4e, +0x45, 0x54, 0x20, 0x43, 0x4c, 0x52, 0x20, 0x32, +0x2e, 0x30, 0x2e, 0x35, 0x30, 0x37, 0x32, 0x37, +0x3b, 0x20, 0x2e, 0x4e, 0x45, 0x54, 0x20, 0x43, +0x4c, 0x52, 0x20, 0x33, 0x2e, 0x30, 0x2e, 0x30, +0x34, 0x35, 0x30, 0x36, 0x2e, 0x36, 0x34, 0x38, +0x3b, 0x20, 0x2e, 0x4e, 0x45, 0x54, 0x20, 0x43, +0x4c, 0x52, 0x20, 0x33, 0x2e, 0x35, 0x2e, 0x32, +0x31, 0x30, 0x32, 0x32, 0x29, 0x0d, 0x0a, 0x48, +0x6f, 0x73, 0x74, 0x3a, 0x20, 0x31, 0x39, 0x32, +0x2e, 0x31, 0x36, 0x38, 0x2e, 0x30, 0x2e, 0x31, +0x32, 0x0d, 0x0a, 0x43, 0x6f, 0x6e, 0x6e, 0x65, +0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3a, 0x20, 0x4b, +0x65, 0x65, 0x70, 0x2d, 0x41, 0x6c, 0x69, 0x76, +0x65, 0x0d, 0x0a, 0x0d, 0x0a }; + +char pkt5[] = { +0x00, 0x14, 0x22, 0xcb, 0x18, 0x2d, 0x00, 0x01, +0x02, 0x45, 0x09, 0x11, 0x08, 0x00, 0x45, 0x00, +0x00, 0x2c, 0x00, 0x02, 0x00, 0x00, 0x40, 0x06, +0xf8, 0xa5, 0xc0, 0xa8, 0x00, 0x0c, 0xc0, 0xa8, +0x00, 0xc8, 0x00, 0x50, 0x0f, 0xe2, 0x00, 0x00, +0x06, 0x68, 0x09, 0xe7, 0xc7, 0x36, 0x60, 0x12, +0x05, 0x92, 0x28, 0xca, 0x00, 0x00, 0x02, 0x04, +0x05, 0x92 }; + +char pkt6[] = { +0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14, +0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00, +0x00, 0x28, 0x09, 0xa1, 0x40, 0x00, 0x80, 0x06, +0x6f, 0x0a, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8, +0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7, +0xc9, 0x35, 0x00, 0x00, 0x06, 0x69, 0x50, 0x10, +0x42, 0xd8, 0x82, 0x3f, 0x00, 0x00 }; + +char pkt7[] = { +0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14, +0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00, +0x02, 0x27, 0x09, 0xa2, 0x40, 0x00, 0x80, 0x06, +0x6d, 0x0a, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8, +0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7, +0xc7, 0x36, 0x00, 0x00, 0x06, 0x69, 0x50, 0x18, +0x42, 0xd8, 0x84, 0x3e, 0x00, 0x00, 0x47, 0x45, +0x54, 0x20, 0x2f, 0x20, 0x48, 0x54, 0x54, 0x50, +0x2f, 0x31, 0x2e, 0x31, 0x0d, 0x0a, 0x41, 0x63, +0x63, 0x65, 0x70, 0x74, 0x3a, 0x20, 0x69, 0x6d, +0x61, 0x67, 0x65, 0x2f, 0x67, 0x69, 0x66, 0x2c, +0x20, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x2f, 0x78, +0x2d, 0x78, 0x62, 0x69, 0x74, 0x6d, 0x61, 0x70, +0x2c, 0x20, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x2f, +0x6a, 0x70, 0x65, 0x67, 0x2c, 0x20, 0x69, 0x6d, +0x61, 0x67, 0x65, 0x2f, 0x70, 0x6a, 0x70, 0x65, +0x67, 0x2c, 0x20, 0x61, 0x70, 0x70, 0x6c, 0x69, +0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x2f, 0x76, +0x6e, 0x64, 0x2e, 0x6d, 0x73, 0x2d, 0x65, 0x78, +0x63, 0x65, 0x6c, 0x2c, 0x20, 0x61, 0x70, 0x70, +0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, +0x2f, 0x6d, 0x73, 0x77, 0x6f, 0x72, 0x64, 0x2c, +0x20, 0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, +0x74, 0x69, 0x6f, 0x6e, 0x2f, 0x76, 0x6e, 0x64, +0x2e, 0x6d, 0x73, 0x2d, 0x70, 0x6f, 0x77, 0x65, +0x72, 0x70, 0x6f, 0x69, 0x6e, 0x74, 0x2c, 0x20, +0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, 0x74, +0x69, 0x6f, 0x6e, 0x2f, 0x78, 0x2d, 0x6d, 0x73, +0x2d, 0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, +0x74, 0x69, 0x6f, 0x6e, 0x2c, 0x20, 0x61, 0x70, +0x70, 0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, +0x6e, 0x2f, 0x78, 0x2d, 0x6d, 0x73, 0x2d, 0x78, +0x62, 0x61, 0x70, 0x2c, 0x20, 0x61, 0x70, 0x70, +0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, +0x2f, 0x76, 0x6e, 0x64, 0x2e, 0x6d, 0x73, 0x2d, +0x78, 0x70, 0x73, 0x64, 0x6f, 0x63, 0x75, 0x6d, +0x65, 0x6e, 0x74, 0x2c, 0x20, 0x61, 0x70, 0x70, +0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, +0x2f, 0x78, 0x61, 0x6d, 0x6c, 0x2b, 0x78, 0x6d, +0x6c, 0x2c, 0x20, 0x2a, 0x2f, 0x2a, 0x0d, 0x0a, +0x41, 0x63, 0x63, 0x65, 0x70, 0x74, 0x2d, 0x4c, +0x61, 0x6e, 0x67, 0x75, 0x61, 0x67, 0x65, 0x3a, +0x20, 0x65, 0x6e, 0x2d, 0x67, 0x62, 0x0d, 0x0a, +0x41, 0x63, 0x63, 0x65, 0x70, 0x74, 0x2d, 0x45, +0x6e, 0x63, 0x6f, 0x64, 0x69, 0x6e, 0x67, 0x3a, +0x20, 0x67, 0x7a, 0x69, 0x70, 0x2c, 0x20, 0x64, +0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x0d, 0x0a, +0x55, 0x73, 0x65, 0x72, 0x2d, 0x41, 0x67, 0x65, +0x6e, 0x74, 0x3a, 0x20, 0x4d, 0x6f, 0x7a, 0x69, +0x6c, 0x6c, 0x61, 0x2f, 0x34, 0x2e, 0x30, 0x20, +0x28, 0x63, 0x6f, 0x6d, 0x70, 0x61, 0x74, 0x69, +0x62, 0x6c, 0x65, 0x3b, 0x20, 0x4d, 0x53, 0x49, +0x45, 0x20, 0x36, 0x2e, 0x30, 0x3b, 0x20, 0x57, +0x69, 0x6e, 0x64, 0x6f, 0x77, 0x73, 0x20, 0x4e, +0x54, 0x20, 0x35, 0x2e, 0x31, 0x3b, 0x20, 0x53, +0x56, 0x31, 0x3b, 0x20, 0x47, 0x6f, 0x6f, 0x67, +0x6c, 0x65, 0x54, 0x35, 0x3b, 0x20, 0x2e, 0x4e, +0x45, 0x54, 0x20, 0x43, 0x4c, 0x52, 0x20, 0x32, +0x2e, 0x30, 0x2e, 0x35, 0x30, 0x37, 0x32, 0x37, +0x3b, 0x20, 0x2e, 0x4e, 0x45, 0x54, 0x20, 0x43, +0x4c, 0x52, 0x20, 0x33, 0x2e, 0x30, 0x2e, 0x30, +0x34, 0x35, 0x30, 0x36, 0x2e, 0x36, 0x34, 0x38, +0x3b, 0x20, 0x2e, 0x4e, 0x45, 0x54, 0x20, 0x43, +0x4c, 0x52, 0x20, 0x33, 0x2e, 0x35, 0x2e, 0x32, +0x31, 0x30, 0x32, 0x32, 0x29, 0x0d, 0x0a, 0x48, +0x6f, 0x73, 0x74, 0x3a, 0x20, 0x31, 0x39, 0x32, +0x2e, 0x31, 0x36, 0x38, 0x2e, 0x30, 0x2e, 0x31, +0x32, 0x0d, 0x0a, 0x43, 0x6f, 0x6e, 0x6e, 0x65, +0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3a, 0x20, 0x4b, +0x65, 0x65, 0x70, 0x2d, 0x41, 0x6c, 0x69, 0x76, +0x65, 0x0d, 0x0a, 0x0d, 0x0a }; + +char pkt8[] = { +0x00, 0x14, 0x22, 0xcb, 0x18, 0x2d, 0x00, 0x01, +0x02, 0x45, 0x09, 0x11, 0x08, 0x00, 0x45, 0x00, +0x00, 0x2c, 0x00, 0x03, 0x00, 0x00, 0x40, 0x06, +0xf8, 0xa4, 0xc0, 0xa8, 0x00, 0x0c, 0xc0, 0xa8, +0x00, 0xc8, 0x00, 0x50, 0x0f, 0xe2, 0x00, 0x00, +0x06, 0x68, 0x09, 0xe7, 0xc7, 0x36, 0x60, 0x12, +0x05, 0x92, 0x28, 0xca, 0x00, 0x00, 0x02, 0x04, +0x05, 0x92 }; + +char pkt9[] = { +0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14, +0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00, +0x00, 0x28, 0x09, 0xa3, 0x40, 0x00, 0x80, 0x06, +0x6f, 0x08, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8, +0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7, +0xc9, 0x35, 0x00, 0x00, 0x06, 0x69, 0x50, 0x10, +0x42, 0xd8, 0x82, 0x3f, 0x00, 0x00 }; + +char pkt10[] = { +0x00, 0x14, 0x22, 0xcb, 0x18, 0x2d, 0x00, 0x01, +0x02, 0x45, 0x09, 0x11, 0x08, 0x00, 0x45, 0x00, +0x00, 0x2c, 0x00, 0x04, 0x00, 0x00, 0x40, 0x06, +0xf8, 0xa3, 0xc0, 0xa8, 0x00, 0x0c, 0xc0, 0xa8, +0x00, 0xc8, 0x00, 0x50, 0x0f, 0xe2, 0x00, 0x00, +0x06, 0x68, 0x09, 0xe7, 0xc7, 0x36, 0x60, 0x12, +0x05, 0x92, 0x28, 0xca, 0x00, 0x00, 0x02, 0x04, +0x05, 0x92 }; + +char pkt11[] = { +0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14, +0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00, +0x00, 0x28, 0x09, 0xa6, 0x40, 0x00, 0x80, 0x06, +0x6f, 0x05, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8, +0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7, +0xc9, 0x35, 0x00, 0x00, 0x06, 0x69, 0x50, 0x10, +0x42, 0xd8, 0x82, 0x3f, 0x00, 0x00 }; + +char pkt12[] = { +0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14, +0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00, +0x00, 0x28, 0x09, 0xa7, 0x40, 0x00, 0x80, 0x06, +0x6f, 0x04, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8, +0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7, +0xc9, 0x35, 0x00, 0x00, 0x06, 0x69, 0x50, 0x14, +0x00, 0x00, 0x43, 0xf4, 0x00, 0x00 }; + + +typedef struct +{ + char *pcData; + int iDataLen; +} xPacketData; + +xPacketData xAllPackets[] = +{ +/* These comments below are there so that we may modify + * them as and when required. Keeping them unmodified. + * Might be removed in later incremental PRs */ + { pkt1, sizeof( pkt1 ) }, +/* { pkt2, sizeof( pkt2 ) }, */ + { pkt3, sizeof( pkt3 ) }, + { pkt4, sizeof( pkt4 ) }, +/* { pkt5, sizeof( pkt5 ) }, */ + { pkt6, sizeof( pkt6 ) }, + { pkt7, sizeof( pkt7 ) }, + { pkt8, sizeof( pkt8 ) }, + { pkt9, sizeof( pkt9 ) }, + { pkt10, sizeof( pkt10 ) }, +/* { pkt11, sizeof( pkt11 ) }, */ +/* { pkt12, sizeof( pkt12 ) }, */ +/* { pkt13, sizeof( pkt13 ) }, */ +/* { pkt14, sizeof( pkt14 ) }, */ +/* { pkt15, sizeof( pkt15 ) }, */ +/* { pkt16, sizeof( pkt16 ) }, */ +}; diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/Win32-Extensions.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/Win32-Extensions.h new file mode 100644 index 0000000000..bad7c33aca --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/Win32-Extensions.h @@ -0,0 +1,114 @@ +/* + * Copyright (c) 1999 - 2005 NetGroup, Politecnico di Torino (Italy) + * Copyright (c) 2005 - 2006 CACE Technologies, Davis (California) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Politecnico di Torino, CACE Technologies + * nor the names of its contributors may be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + +#ifndef __WIN32_EXTENSIONS_H__ +#define __WIN32_EXTENSIONS_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Definitions */ + +/*! + \brief A queue of raw packets that will be sent to the network with pcap_sendqueue_transmit(). +*/ +struct pcap_send_queue +{ + u_int maxlen; ///< Maximum size of the the queue, in bytes. This variable contains the size of the buffer field. + u_int len; ///< Current size of the queue, in bytes. + char *buffer; ///< Buffer containing the packets to be sent. +}; + +typedef struct pcap_send_queue pcap_send_queue; + +/*! + \brief This typedef is a support for the pcap_get_airpcap_handle() function +*/ +#if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_) +#define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ +typedef struct _AirpcapHandle *PAirpcapHandle; +#endif + +#define BPF_MEM_EX_IMM 0xc0 +#define BPF_MEM_EX_IND 0xe0 + +/*used for ST*/ +#define BPF_MEM_EX 0xc0 +#define BPF_TME 0x08 + +#define BPF_LOOKUP 0x90 +#define BPF_EXECUTE 0xa0 +#define BPF_INIT 0xb0 +#define BPF_VALIDATE 0xc0 +#define BPF_SET_ACTIVE 0xd0 +#define BPF_RESET 0xe0 +#define BPF_SET_MEMORY 0x80 +#define BPF_GET_REGISTER_VALUE 0x70 +#define BPF_SET_REGISTER_VALUE 0x60 +#define BPF_SET_WORKING 0x50 +#define BPF_SET_ACTIVE_READ 0x40 +#define BPF_SET_AUTODELETION 0x30 +#define BPF_SEPARATION 0xff + +/* Prototypes */ +pcap_send_queue* pcap_sendqueue_alloc(u_int memsize); + +void pcap_sendqueue_destroy(pcap_send_queue* queue); + +int pcap_sendqueue_queue(pcap_send_queue* queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data); + +u_int pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue* queue, int sync); + +HANDLE pcap_getevent(pcap_t *p); + +struct pcap_stat *pcap_stats_ex(pcap_t *p, int *pcap_stat_size); + +int pcap_setuserbuffer(pcap_t *p, int size); + +int pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks); + +int pcap_live_dump_ended(pcap_t *p, int sync); + +int pcap_offline_filter(struct bpf_program *prog, const struct pcap_pkthdr *header, const u_char *pkt_data); + +int pcap_start_oem(char* err_str, int flags); + +PAirpcapHandle pcap_get_airpcap_handle(pcap_t *p); + +#ifdef __cplusplus +} +#endif + +#endif //__WIN32_EXTENSIONS_H__ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/arch.c b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/arch.c new file mode 100644 index 0000000000..f5db41dae4 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/arch.c @@ -0,0 +1,336 @@ +/* + * FreeRTOS Kernel V10.3.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/* WinPCap includes. */ +#include "pcap.h" +#include "remote-ext.h" + +/* uIP includes. */ +#include "net/uip.h" +#include "net/uip_arp.h" +#include "net/clock-arch.h" + +/* FreeRTOS includes. */ +#include "FreeRTOS.h" +#include "task.h" +#include "queue.h" + +/* + * Query the computer the simulation is being executed on to find the network + * interfaces it has installed. + */ +static pcap_if_t * prvPrintAvailableNetworkInterfaces( void ); + +/* + * Open the network interface. The number of the interface to be opened is set + * by the configNETWORK_INTERFACE_TO_USE constant in FreeRTOSConfig.h. + */ +static void prvOpenSelectedNetworkInterface( pcap_if_t *pxAllNetworkInterfaces ); + +/* + * Configure the capture filter to allow blocking reads, and to filter out + * packets that are not of interest to this demo. + */ +static void prvConfigureCaptureBehaviour( void ); + +pcap_t *pxOpenedInterfaceHandle = NULL; +LARGE_INTEGER freq, sys_start_time; + +#define archNUM_BUFFERS 5 +#define archNUM_BUFFER_POINTERS ( archNUM_BUFFERS - 1 ) + +static void prvInterruptSimulator( void *pvParameters ); + +static unsigned char ucEthernetBuffer[ archNUM_BUFFERS ][ UIP_CONF_BUFFER_SIZE ]; +static unsigned char *pucEthernetBufferPointers[ archNUM_BUFFER_POINTERS ]; + +static long lLengthOfDataInBuffer[ archNUM_BUFFER_POINTERS ] = { 0 }; +static unsigned char ucNextBufferToFill = 0U, ucNextBufferToProcess = 0U; + +unsigned char *uip_buf = NULL; +char cErrorBuffer[PCAP_ERRBUF_SIZE]; + +void vNetifTx( void ) +{ + pcap_sendpacket( pxOpenedInterfaceHandle, uip_buf, uip_len ); + pcap_sendpacket( pxOpenedInterfaceHandle, uip_buf, uip_len ); +} +/*-----------------------------------------------------------*/ + +UBaseType_t uxNetifRx( void ) +{ +UBaseType_t xDataLen; +unsigned char *pucTemp; + + /* Check there is really data available. */ + xDataLen = lLengthOfDataInBuffer[ ucNextBufferToProcess ]; + if( xDataLen != 0L ) + { + + /* The buffer pointed to by uip_buf is going to change. Remember which + buffer uip_buf is currently pointing to. */ + pucTemp = uip_buf; + + /* Point uip_buf at the next buffer that contains data. */ + uip_buf = pucEthernetBufferPointers[ ucNextBufferToProcess ]; + + /* The buffer pointed to by + pucEthernetBufferPointeres[ ucNextBufferToProcess ] is now in use by + uip_buf, but the buffer uip_buf was pointing to on entry to this + function is free. Set + pucEthernetBufferPointeres[ ucNextBufferToProcess ] to the free + buffer. */ + pucEthernetBufferPointers[ ucNextBufferToProcess ] = pucTemp; + lLengthOfDataInBuffer[ ucNextBufferToProcess ] = 0L; + + ucNextBufferToProcess++; + if( ucNextBufferToProcess >= archNUM_BUFFER_POINTERS ) + { + ucNextBufferToProcess = 0L; + } + } + + return xDataLen; +} +/*-----------------------------------------------------------*/ + +BaseType_t xNetifInit( void ) +{ +BaseType_t x; +pcap_if_t *pxAllNetworkInterfaces; + + /* Allocate a free buffer to each buffer pointer. */ + for( x = 0; x < sizeof( pucEthernetBufferPointers ) / sizeof( unsigned char * ); x++ ) + { + pucEthernetBufferPointers[ x ] = &( ucEthernetBuffer[ x ][ 0 ] ); + } + + /* Start with uip_buf pointing to a buffer that is not referenced from the + pucEthernetBufferPointers[] array. */ + uip_buf = &( ucEthernetBuffer[ archNUM_BUFFERS - 1 ][ 0 ] ); + + /* Query the computer the simulation is being executed on to find the + network interfaces it has installed. */ + pxAllNetworkInterfaces = prvPrintAvailableNetworkInterfaces(); + + /* Open the network interface. The number of the interface to be opened is + set by the configNETWORK_INTERFACE_TO_USE constant in FreeRTOSConfig.h. + Calling this function will set the pxOpenedInterfaceHandle variable. If, + after calling this function, pxOpenedInterfaceHandle is equal to NULL, then + the interface could not be opened. */ + if( pxAllNetworkInterfaces != NULL ) + { + prvOpenSelectedNetworkInterface( pxAllNetworkInterfaces ); + } + + + return x; +} +/*-----------------------------------------------------------*/ + +static pcap_if_t * prvPrintAvailableNetworkInterfaces( void ) +{ +pcap_if_t * pxAllNetworkInterfaces = NULL, *xInterface; +long lInterfaceNumber = 1; + + if( pcap_findalldevs_ex( PCAP_SRC_IF_STRING, NULL, &pxAllNetworkInterfaces, cErrorBuffer ) == -1 ) + { + printf( "\r\nCould not obtain a list of network interfaces\r\n%s\r\n", cErrorBuffer ); + pxAllNetworkInterfaces = NULL; + } + + if( pxAllNetworkInterfaces != NULL ) + { + /* Print out the list of network interfaces. The first in the list + is interface '1', not interface '0'. */ + for( xInterface = pxAllNetworkInterfaces; xInterface != NULL; xInterface = xInterface->next ) + { + printf( "%d. %s", lInterfaceNumber, xInterface->name ); + + if( xInterface->description != NULL ) + { + printf( " (%s)\r\n", xInterface->description ); + } + else + { + printf( " (No description available)\r\n") ; + } + + lInterfaceNumber++; + } + } + + if( lInterfaceNumber == 1 ) + { + /* The interface number was never incremented, so the above for() loop + did not execute meaning no interfaces were found. */ + printf( " \r\nNo network interfaces were found.\r\n" ); + pxAllNetworkInterfaces = NULL; + } + + printf( "\r\nThe interface that will be opened is set by configNETWORK_INTERFACE_TO_USE which should be defined in FreeRTOSConfig.h\r\n" ); + printf( "Attempting to open interface number %d.\r\n", configNETWORK_INTERFACE_TO_USE ); + + if( ( configNETWORK_INTERFACE_TO_USE < 1L ) || ( configNETWORK_INTERFACE_TO_USE > lInterfaceNumber ) ) + { + printf("\r\nconfigNETWORK_INTERFACE_TO_USE is not in the valid range.\r\n" ); + + if( pxAllNetworkInterfaces != NULL ) + { + /* Free the device list, as no devices are going to be opened. */ + pcap_freealldevs( pxAllNetworkInterfaces ); + pxAllNetworkInterfaces = NULL; + } + } + + return pxAllNetworkInterfaces; +} +/*-----------------------------------------------------------*/ + +static void prvOpenSelectedNetworkInterface( pcap_if_t *pxAllNetworkInterfaces ) +{ +pcap_if_t *xInterface; +long x; + + /* Walk the list of devices until the selected device is located. */ + xInterface = pxAllNetworkInterfaces; + for( x = 0L; x < ( configNETWORK_INTERFACE_TO_USE - 1L ); x++ ) + { + xInterface = xInterface->next; + } + + /* Open the selected interface. */ + pxOpenedInterfaceHandle = pcap_open( xInterface->name, /* The name of the selected interface. */ + UIP_CONF_BUFFER_SIZE, /* The size of the packet to capture. */ + PCAP_OPENFLAG_PROMISCUOUS, /* Open in promiscious mode as the MAC and + IP address is going to be "simulated", and + not be the real MAC and IP address. This allows + trafic to the simulated IP address to be routed + to uIP, and trafic to the real IP address to be + routed to the Windows TCP/IP stack. */ + 0xfffffffL, /* The read time out. This is going to block + until data is available. */ + NULL, /* No authentication is required as this is + not a remote capture session. */ + cErrorBuffer + ); + + if ( pxOpenedInterfaceHandle == NULL ) + { + printf( "\r\n%s is not supported by WinPcap and cannot be opened\r\n", xInterface->name ); + } + else + { + /* Configure the capture filter to allow blocking reads, and to filter + out packets that are not of interest to this demo. */ + prvConfigureCaptureBehaviour(); + } + + /* The device list is no longer required. */ + pcap_freealldevs( pxAllNetworkInterfaces ); +} +/*-----------------------------------------------------------*/ + +static void prvConfigureCaptureBehaviour( void ) +{ +struct bpf_program xFilterCode; +const long lMinBytesToCopy = 10L, lBlocking = 0L; +unsigned long ulNetMask; + + /* Unblock a read as soon as anything is received. */ + pcap_setmintocopy( pxOpenedInterfaceHandle, lMinBytesToCopy ); + + /* Allow blocking. */ + pcap_setnonblock( pxOpenedInterfaceHandle, lBlocking, cErrorBuffer ); + + /* Set up a filter so only the packets of interest are passed to the uIP + stack. cErrorBuffer is used for convenience to create the string. Don't + confuse this with an error message. */ + sprintf( cErrorBuffer, "broadcast or multicast or host %d.%d.%d.%d", configIP_ADDR0, configIP_ADDR1, configIP_ADDR2, configIP_ADDR3 ); + + ulNetMask = ( configNET_MASK3 << 24UL ) | ( configNET_MASK2 << 16UL ) | ( configNET_MASK1 << 8L ) | configNET_MASK0; + + if( pcap_compile(pxOpenedInterfaceHandle, &xFilterCode, cErrorBuffer, 1, ulNetMask ) < 0 ) + { + printf("\r\nThe packet filter string is invalid\r\n" ); + } + else + { + if( pcap_setfilter( pxOpenedInterfaceHandle, &xFilterCode ) < 0 ) + { + printf( "\r\nAn error occurred setting the packet filter.\r\n" ); + } + } + + /* Create a task that simulates an interrupt in a real system. This will + block waiting for packets, then send a message to the uIP task when data + is available. */ + xTaskCreate( prvInterruptSimulator, ( signed char * ) "MAC_ISR", configMINIMAL_STACK_SIZE, NULL, ( configuIP_TASK_PRIORITY - 1 ), NULL ); +} +/*-----------------------------------------------------------*/ + +static void prvInterruptSimulator( void *pvParameters ) +{ +static struct pcap_pkthdr *pxHeader; +const unsigned char *pucPacketData; +extern QueueHandle_t xEMACEventQueue; +const unsigned long ulRxEvent = uipETHERNET_RX_EVENT; +long lResult; + + /* Just to kill the compiler warning. */ + ( void ) pvParameters; + + for( ;; ) + { + /* Get the next packet. */ + lResult = pcap_next_ex( pxOpenedInterfaceHandle, &pxHeader, &pucPacketData ); + if( lResult ) + { + /* Is the next buffer into which data should be placed free? */ + if( lLengthOfDataInBuffer[ ucNextBufferToFill ] == 0L ) + { + /* Copy the data from the captured packet into the buffer. */ + memcpy( pucEthernetBufferPointers[ ucNextBufferToFill ], pucPacketData, pxHeader->len ); + + /* Note the amount of data that was copied. */ + lLengthOfDataInBuffer[ ucNextBufferToFill ] = pxHeader->len; + + /* Move onto the next buffer, wrapping around if necessary. */ + ucNextBufferToFill++; + if( ucNextBufferToFill >= archNUM_BUFFER_POINTERS ) + { + ucNextBufferToFill = 0U; + } + + /* Data was received and stored. Send a message to the uIP task + to let it know. */ + xQueueSendToBack( xEMACEventQueue, &ulRxEvent, portMAX_DELAY ); + } + } + } +} + diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/bittypes.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/bittypes.h new file mode 100644 index 0000000000..f55fcecfd2 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/bittypes.h @@ -0,0 +1,137 @@ +/* + * Copyright (C) 1999 WIDE Project. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ +#ifndef _BITTYPES_H +#define _BITTYPES_H + +#ifndef HAVE_U_INT8_T + +#if SIZEOF_CHAR == 1 +typedef unsigned char u_int8_t; +typedef signed char _int8_t; +#elif SIZEOF_INT == 1 +typedef unsigned int u_int8_t; +typedef signed int int8_t; +#else /* XXX */ +#error "there's no appropriate type for u_int8_t" +#endif +#define HAVE_U_INT8_T 1 +#define HAVE_INT8_T 1 + +#endif /* HAVE_U_INT8_T */ + +#ifndef HAVE_U_INT16_T + +#if SIZEOF_SHORT == 2 +typedef unsigned short u_int16_t; +typedef signed short _int16_t; +#elif SIZEOF_INT == 2 +typedef unsigned int u_int16_t; +typedef signed int int16_t; +#elif SIZEOF_CHAR == 2 +typedef unsigned char u_int16_t; +typedef signed char int16_t; +#else /* XXX */ +#error "there's no appropriate type for u_int16_t" +#endif +#define HAVE_U_INT16_T 1 +#define HAVE_INT16_T 1 + +#endif /* HAVE_U_INT16_T */ + +#ifndef HAVE_U_INT32_T + +#if SIZEOF_INT == 4 +typedef unsigned int u_int32_t; +typedef signed int _int32_t; +#elif SIZEOF_LONG == 4 +typedef unsigned long u_int32_t; +typedef signed long int32_t; +#elif SIZEOF_SHORT == 4 +typedef unsigned short u_int32_t; +typedef signed short int32_t; +#else /* XXX */ +#error "there's no appropriate type for u_int32_t" +#endif +#define HAVE_U_INT32_T 1 +#define HAVE_INT32_T 1 + +#endif /* HAVE_U_INT32_T */ + +#ifndef HAVE_U_INT64_T +#if SIZEOF_LONG_LONG == 8 +typedef unsigned long long u_int64_t; +typedef long long int64_t; +#elif defined(_MSC_EXTENSIONS) +typedef unsigned _int64 u_int64_t; +typedef _int64 int64_t; +#elif SIZEOF_INT == 8 +typedef unsigned int u_int64_t; +#elif SIZEOF_LONG == 8 +typedef unsigned long u_int64_t; +#elif SIZEOF_SHORT == 8 +typedef unsigned short u_int64_t; +#else /* XXX */ +#error "there's no appropriate type for u_int64_t" +#endif + +#endif /* HAVE_U_INT64_T */ + +#ifndef PRId64 +#ifdef _MSC_EXTENSIONS +#define PRId64 "I64d" +#else /* _MSC_EXTENSIONS */ +#define PRId64 "lld" +#endif /* _MSC_EXTENSIONS */ +#endif /* PRId64 */ + +#ifndef PRIo64 +#ifdef _MSC_EXTENSIONS +#define PRIo64 "I64o" +#else /* _MSC_EXTENSIONS */ +#define PRIo64 "llo" +#endif /* _MSC_EXTENSIONS */ +#endif /* PRIo64 */ + +#ifndef PRIx64 +#ifdef _MSC_EXTENSIONS +#define PRIx64 "I64x" +#else /* _MSC_EXTENSIONS */ +#define PRIx64 "llx" +#endif /* _MSC_EXTENSIONS */ +#endif /* PRIx64 */ + +#ifndef PRIu64 +#ifdef _MSC_EXTENSIONS +#define PRIu64 "I64u" +#else /* _MSC_EXTENSIONS */ +#define PRIu64 "llu" +#endif /* _MSC_EXTENSIONS */ +#endif /* PRIu64 */ + +#endif /* _BITTYPES_H */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/ip6_misc.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/ip6_misc.h new file mode 100644 index 0000000000..562fa6184e --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/ip6_misc.h @@ -0,0 +1,163 @@ +/* + * Copyright (c) 1993, 1994, 1997 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that: (1) source code distributions + * retain the above copyright notice and this paragraph in its entirety, (2) + * distributions including binary code include the above copyright notice and + * this paragraph in its entirety in the documentation or other materials + * provided with the distribution, and (3) all advertising materials mentioning + * features or use of this software display the following acknowledgement: + * ``This product includes software developed by the University of California, + * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of + * the University nor the names of its contributors may be used to endorse + * or promote products derived from this software without specific prior + * written permission. + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. + * + * @(#) $Header: /tcpdump/master/libpcap/Win32/Include/ip6_misc.h,v 1.5 2006-01-22 18:02:18 gianluca Exp $ (LBL) + */ + +/* + * This file contains a collage of declarations for IPv6 from FreeBSD not present in Windows + */ + +#include + +#include + +#ifndef __MINGW32__ +#define IN_MULTICAST(a) IN_CLASSD(a) +#endif + +#define IN_EXPERIMENTAL(a) ((((u_int32_t) (a)) & 0xf0000000) == 0xf0000000) + +#define IN_LOOPBACKNET 127 + +#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF) +/* IPv6 address */ +struct in6_addr + { + union + { + u_int8_t u6_addr8[16]; + u_int16_t u6_addr16[8]; + u_int32_t u6_addr32[4]; + } in6_u; +#define s6_addr in6_u.u6_addr8 +#define s6_addr16 in6_u.u6_addr16 +#define s6_addr32 in6_u.u6_addr32 +#define s6_addr64 in6_u.u6_addr64 + }; + +#define IN6ADDR_ANY_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } +#define IN6ADDR_LOOPBACK_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } +#endif /* __MINGW32__ */ + + +#if (defined _MSC_VER) || (defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)) +typedef unsigned short sa_family_t; +#endif + + +#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF) + +#define __SOCKADDR_COMMON(sa_prefix) \ + sa_family_t sa_prefix##family + +/* Ditto, for IPv6. */ +struct sockaddr_in6 + { + __SOCKADDR_COMMON (sin6_); + u_int16_t sin6_port; /* Transport layer port # */ + u_int32_t sin6_flowinfo; /* IPv6 flow information */ + struct in6_addr sin6_addr; /* IPv6 address */ + }; + +#define IN6_IS_ADDR_V4MAPPED(a) \ + ((((u_int32_t *) (a))[0] == 0) && (((u_int32_t *) (a))[1] == 0) && \ + (((u_int32_t *) (a))[2] == htonl (0xffff))) + +#define IN6_IS_ADDR_MULTICAST(a) (((u_int8_t *) (a))[0] == 0xff) + +#define IN6_IS_ADDR_LINKLOCAL(a) \ + ((((u_int32_t *) (a))[0] & htonl (0xffc00000)) == htonl (0xfe800000)) + +#define IN6_IS_ADDR_LOOPBACK(a) \ + (((u_int32_t *) (a))[0] == 0 && ((u_int32_t *) (a))[1] == 0 && \ + ((u_int32_t *) (a))[2] == 0 && ((u_int32_t *) (a))[3] == htonl (1)) +#endif /* __MINGW32__ */ + +#define ip6_vfc ip6_ctlun.ip6_un2_vfc +#define ip6_flow ip6_ctlun.ip6_un1.ip6_un1_flow +#define ip6_plen ip6_ctlun.ip6_un1.ip6_un1_plen +#define ip6_nxt ip6_ctlun.ip6_un1.ip6_un1_nxt +#define ip6_hlim ip6_ctlun.ip6_un1.ip6_un1_hlim +#define ip6_hops ip6_ctlun.ip6_un1.ip6_un1_hlim + +#define nd_rd_type nd_rd_hdr.icmp6_type +#define nd_rd_code nd_rd_hdr.icmp6_code +#define nd_rd_cksum nd_rd_hdr.icmp6_cksum +#define nd_rd_reserved nd_rd_hdr.icmp6_data32[0] + +/* + * IPV6 extension headers + */ +#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ +#define IPPROTO_IPV6 41 /* IPv6 header. */ +#define IPPROTO_ROUTING 43 /* IPv6 routing header */ +#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ +#define IPPROTO_ESP 50 /* encapsulating security payload */ +#define IPPROTO_AH 51 /* authentication header */ +#define IPPROTO_ICMPV6 58 /* ICMPv6 */ +#define IPPROTO_NONE 59 /* IPv6 no next header */ +#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ +#define IPPROTO_PIM 103 /* Protocol Independent Multicast. */ + +#define IPV6_RTHDR_TYPE_0 0 + +/* Option types and related macros */ +#define IP6OPT_PAD1 0x00 /* 00 0 00000 */ +#define IP6OPT_PADN 0x01 /* 00 0 00001 */ +#define IP6OPT_JUMBO 0xC2 /* 11 0 00010 = 194 */ +#define IP6OPT_JUMBO_LEN 6 +#define IP6OPT_ROUTER_ALERT 0x05 /* 00 0 00101 */ + +#define IP6OPT_RTALERT_LEN 4 +#define IP6OPT_RTALERT_MLD 0 /* Datagram contains an MLD message */ +#define IP6OPT_RTALERT_RSVP 1 /* Datagram contains an RSVP message */ +#define IP6OPT_RTALERT_ACTNET 2 /* contains an Active Networks msg */ +#define IP6OPT_MINLEN 2 + +#define IP6OPT_BINDING_UPDATE 0xc6 /* 11 0 00110 */ +#define IP6OPT_BINDING_ACK 0x07 /* 00 0 00111 */ +#define IP6OPT_BINDING_REQ 0x08 /* 00 0 01000 */ +#define IP6OPT_HOME_ADDRESS 0xc9 /* 11 0 01001 */ +#define IP6OPT_EID 0x8a /* 10 0 01010 */ + +#define IP6OPT_TYPE(o) ((o) & 0xC0) +#define IP6OPT_TYPE_SKIP 0x00 +#define IP6OPT_TYPE_DISCARD 0x40 +#define IP6OPT_TYPE_FORCEICMP 0x80 +#define IP6OPT_TYPE_ICMP 0xC0 + +#define IP6OPT_MUTABLE 0x20 + + +#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF) +#ifndef EAI_ADDRFAMILY +struct addrinfo { + int ai_flags; /* AI_PASSIVE, AI_CANONNAME */ + int ai_family; /* PF_xxx */ + int ai_socktype; /* SOCK_xxx */ + int ai_protocol; /* 0 or IPPROTO_xxx for IPv4 and IPv6 */ + size_t ai_addrlen; /* length of ai_addr */ + char *ai_canonname; /* canonical name for hostname */ + struct sockaddr *ai_addr; /* binary address */ + struct addrinfo *ai_next; /* next structure in linked list */ +}; +#endif +#endif /* __MINGW32__ */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/netif.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/netif.h new file mode 100644 index 0000000000..8379914096 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/netif.h @@ -0,0 +1,52 @@ +/* + * FreeRTOS Kernel V10.3.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef NET_IF_H +#define NET_IF_H + +/* + * Send uip_len bytes from uip_buf to the network interface selected by the + * configNETWORK_INTERFACE_TO_USE constant (defined in FreeRTOSConfig.h). + */ +void vNetifTx( void ); + +/* + * Receive bytes from the network interface selected by the + * configNETWORK_INTERFACE_TO_USE constant (defined in FreeRTOSConfig.h). The + * bytes are placed in uip_buf. The number of bytes copied into uip_buf is + * returned. + */ +UBaseType_t uxNetifRx( void ); + +/* + * Prepare a packet capture session. This will print out all the network + * interfaces available, and the one actually used is set by the + * configNETWORK_INTERFACE_TO_USE constant that is defined in + * FreeRTOSConfig.h. */ +BaseType_t xNetifInit( void ); + +#endif /* NET_IF_H */ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap-bpf.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap-bpf.h new file mode 100644 index 0000000000..5fe129dbb4 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap-bpf.h @@ -0,0 +1,47 @@ +/*- + * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from the Stanford/CMU enet packet filter, + * (net/enet.c) distributed as part of 4.3BSD, and code contributed + * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence + * Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap-bpf.h,v 1.50 2007/04/01 21:43:55 guy Exp $ (LBL) + */ + +/* + * For backwards compatibility. + * + * Note to OS vendors: do NOT get rid of this file! Some applications + * might expect to be able to include . + */ +#include diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap-namedb.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap-namedb.h new file mode 100644 index 0000000000..80a2f00401 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap-namedb.h @@ -0,0 +1,42 @@ +/* + * Copyright (c) 1994, 1996 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the Computer Systems + * Engineering Group at Lawrence Berkeley Laboratory. + * 4. Neither the name of the University nor of the Laboratory may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap-namedb.h,v 1.13 2006/10/04 18:13:32 guy Exp $ (LBL) + */ + +/* + * For backwards compatibility. + * + * Note to OS vendors: do NOT get rid of this file! Some applications + * might expect to be able to include . + */ +#include diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap-stdinc.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap-stdinc.h new file mode 100644 index 0000000000..417604177b --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap-stdinc.h @@ -0,0 +1,93 @@ +/* + * Copyright (c) 2002 - 2005 NetGroup, Politecnico di Torino (Italy) + * Copyright (c) 2005 - 2009 CACE Technologies, Inc. Davis (California) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Politecnico di Torino nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap-stdinc.h,v 1.10.2.1 2008-10-06 15:38:39 gianluca Exp $ (LBL) + */ + +#define SIZEOF_CHAR 1 +#define SIZEOF_SHORT 2 +#define SIZEOF_INT 4 +#ifndef _MSC_EXTENSIONS +#define SIZEOF_LONG_LONG 8 +#endif + +/* + * Avoids a compiler warning in case this was already defined + * (someone defined _WINSOCKAPI_ when including 'windows.h', in order + * to prevent it from including 'winsock.h') + */ +#ifdef _WINSOCKAPI_ +#undef _WINSOCKAPI_ +#endif +#include + +#include + +#include "bittypes.h" +#include +#include + +#ifndef __MINGW32__ +#include "IP6_misc.h" +#endif + +#define caddr_t char* + +#if _MSC_VER < 1500 +#define snprintf _snprintf +#define vsnprintf _vsnprintf +#define strdup _strdup +#endif + +#define inline __inline + +#ifdef __MINGW32__ +#include +#else /*__MINGW32__*/ +/* MSVC compiler */ +#ifndef _UINTPTR_T_DEFINED +#ifdef _WIN64 +typedef unsigned __int64 uintptr_t; +#else +typedef _W64 unsigned int uintptr_t; +#endif +#define _UINTPTR_T_DEFINED +#endif + +#ifndef _INTPTR_T_DEFINED +#ifdef _WIN64 +typedef __int64 intptr_t; +#else +typedef _W64 int intptr_t; +#endif +#define _INTPTR_T_DEFINED +#endif + +#endif /*__MINGW32__*/ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap.h new file mode 100644 index 0000000000..935f9494c1 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap.h @@ -0,0 +1,45 @@ +/* + * Copyright (c) 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the Computer Systems + * Engineering Group at Lawrence Berkeley Laboratory. + * 4. Neither the name of the University nor of the Laboratory may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap.h,v 1.59 2006/10/04 18:09:22 guy Exp $ (LBL) + */ + +/* + * For backwards compatibility. + * + * Note to OS vendors: do NOT get rid of this file! Many applications + * expect to be able to include , and at least some of them + * go through contortions in their configure scripts to try to detect + * OSes that have "helpfully" moved pcap.h to without + * leaving behind a file. + */ +#include diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/bluetooth.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/bluetooth.h new file mode 100644 index 0000000000..7bf65df034 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/bluetooth.h @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2006 Paolo Abeni (Italy) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * bluetooth data struct + * By Paolo Abeni + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/bluetooth.h,v 1.1 2007/09/22 02:10:17 guy Exp $ + */ + +#ifndef _PCAP_BLUETOOTH_STRUCTS_H__ +#define _PCAP_BLUETOOTH_STRUCTS_H__ + +/* + * Header prepended libpcap to each bluetooth h:4 frame. + * fields are in network byte order + */ +typedef struct _pcap_bluetooth_h4_header { + u_int32_t direction; /* if first bit is set direction is incoming */ +} pcap_bluetooth_h4_header; + + +#endif diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/bpf.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/bpf.h new file mode 100644 index 0000000000..9f4ca33e35 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/bpf.h @@ -0,0 +1,934 @@ +/*- + * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from the Stanford/CMU enet packet filter, + * (net/enet.c) distributed as part of 4.3BSD, and code contributed + * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence + * Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)bpf.h 7.1 (Berkeley) 5/7/91 + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/bpf.h,v 1.19.2.8 2008-09-22 20:16:01 guy Exp $ (LBL) + */ + +/* + * This is libpcap's cut-down version of bpf.h; it includes only + * the stuff needed for the code generator and the userland BPF + * interpreter, and the libpcap APIs for setting filters, etc.. + * + * "pcap-bpf.c" will include the native OS version, as it deals with + * the OS's BPF implementation. + * + * XXX - should this all just be moved to "pcap.h"? + */ + +#ifndef BPF_MAJOR_VERSION + +#ifdef __cplusplus +extern "C" { +#endif + +/* BSD style release date */ +#define BPF_RELEASE 199606 + +#ifdef MSDOS /* must be 32-bit */ +typedef long bpf_int32; +typedef unsigned long bpf_u_int32; +#else +typedef int bpf_int32; +typedef u_int bpf_u_int32; +#endif + +/* + * Alignment macros. BPF_WORDALIGN rounds up to the next + * even multiple of BPF_ALIGNMENT. + */ +#ifndef __NetBSD__ +#define BPF_ALIGNMENT sizeof(bpf_int32) +#else +#define BPF_ALIGNMENT sizeof(long) +#endif +#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1)) + +#define BPF_MAXBUFSIZE 0x8000 +#define BPF_MINBUFSIZE 32 + +/* + * Structure for "pcap_compile()", "pcap_setfilter()", etc.. + */ +struct bpf_program { + u_int bf_len; + struct bpf_insn *bf_insns; +}; + +/* + * Struct return by BIOCVERSION. This represents the version number of + * the filter language described by the instruction encodings below. + * bpf understands a program iff kernel_major == filter_major && + * kernel_minor >= filter_minor, that is, if the value returned by the + * running kernel has the same major number and a minor number equal + * equal to or less than the filter being downloaded. Otherwise, the + * results are undefined, meaning an error may be returned or packets + * may be accepted haphazardly. + * It has nothing to do with the source code version. + */ +struct bpf_version { + u_short bv_major; + u_short bv_minor; +}; +/* Current version number of filter architecture. */ +#define BPF_MAJOR_VERSION 1 +#define BPF_MINOR_VERSION 1 + +/* + * Data-link level type codes. + * + * Do *NOT* add new values to this list without asking + * "tcpdump-workers@lists.tcpdump.org" for a value. Otherwise, you run + * the risk of using a value that's already being used for some other + * purpose, and of having tools that read libpcap-format captures not + * being able to handle captures with your new DLT_ value, with no hope + * that they will ever be changed to do so (as that would destroy their + * ability to read captures using that value for that other purpose). + */ + +/* + * These are the types that are the same on all platforms, and that + * have been defined by for ages. + */ +#define DLT_NULL 0 /* BSD loopback encapsulation */ +#define DLT_EN10MB 1 /* Ethernet (10Mb) */ +#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */ +#define DLT_AX25 3 /* Amateur Radio AX.25 */ +#define DLT_PRONET 4 /* Proteon ProNET Token Ring */ +#define DLT_CHAOS 5 /* Chaos */ +#define DLT_IEEE802 6 /* 802.5 Token Ring */ +#define DLT_ARCNET 7 /* ARCNET, with BSD-style header */ +#define DLT_SLIP 8 /* Serial Line IP */ +#define DLT_PPP 9 /* Point-to-point Protocol */ +#define DLT_FDDI 10 /* FDDI */ + +/* + * These are types that are different on some platforms, and that + * have been defined by for ages. We use #ifdefs to + * detect the BSDs that define them differently from the traditional + * libpcap + * + * XXX - DLT_ATM_RFC1483 is 13 in BSD/OS, and DLT_RAW is 14 in BSD/OS, + * but I don't know what the right #define is for BSD/OS. + */ +#define DLT_ATM_RFC1483 11 /* LLC-encapsulated ATM */ + +#ifdef __OpenBSD__ +#define DLT_RAW 14 /* raw IP */ +#else +#define DLT_RAW 12 /* raw IP */ +#endif + +/* + * Given that the only OS that currently generates BSD/OS SLIP or PPP + * is, well, BSD/OS, arguably everybody should have chosen its values + * for DLT_SLIP_BSDOS and DLT_PPP_BSDOS, which are 15 and 16, but they + * didn't. So it goes. + */ +#if defined(__NetBSD__) || defined(__FreeBSD__) +#ifndef DLT_SLIP_BSDOS +#define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */ +#define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */ +#endif +#else +#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */ +#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */ +#endif + +/* + * 17 is used for DLT_OLD_PFLOG in OpenBSD; + * OBSOLETE: DLT_PFLOG is 117 in OpenBSD now as well. See below. + * 18 is used for DLT_PFSYNC in OpenBSD; don't use it for anything else. + */ + +#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */ + +/* + * Apparently Redback uses this for its SmartEdge 400/800. I hope + * nobody else decided to use it, too. + */ +#define DLT_REDBACK_SMARTEDGE 32 + +/* + * These values are defined by NetBSD; other platforms should refrain from + * using them for other purposes, so that NetBSD savefiles with link + * types of 50 or 51 can be read as this type on all platforms. + */ +#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */ +#define DLT_PPP_ETHER 51 /* PPP over Ethernet */ + +/* + * The Axent Raptor firewall - now the Symantec Enterprise Firewall - uses + * a link-layer type of 99 for the tcpdump it supplies. The link-layer + * header has 6 bytes of unknown data, something that appears to be an + * Ethernet type, and 36 bytes that appear to be 0 in at least one capture + * I've seen. + */ +#define DLT_SYMANTEC_FIREWALL 99 + +/* + * Values between 100 and 103 are used in capture file headers as + * link-layer types corresponding to DLT_ types that differ + * between platforms; don't use those values for new DLT_ new types. + */ + +/* + * This value was defined by libpcap 0.5; platforms that have defined + * it with a different value should define it here with that value - + * a link type of 104 in a save file will be mapped to DLT_C_HDLC, + * whatever value that happens to be, so programs will correctly + * handle files with that link type regardless of the value of + * DLT_C_HDLC. + * + * The name DLT_C_HDLC was used by BSD/OS; we use that name for source + * compatibility with programs written for BSD/OS. + * + * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well, + * for source compatibility with programs written for libpcap 0.5. + */ +#define DLT_C_HDLC 104 /* Cisco HDLC */ +#define DLT_CHDLC DLT_C_HDLC + +#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */ + +/* + * 106 is reserved for Linux Classical IP over ATM; it's like DLT_RAW, + * except when it isn't. (I.e., sometimes it's just raw IP, and + * sometimes it isn't.) We currently handle it as DLT_LINUX_SLL, + * so that we don't have to worry about the link-layer header.) + */ + +/* + * Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides + * with other values. + * DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header + * (DLCI, etc.). + */ +#define DLT_FRELAY 107 + +/* + * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except + * that the AF_ type in the link-layer header is in network byte order. + * + * DLT_LOOP is 12 in OpenBSD, but that's DLT_RAW in other OSes, so + * we don't use 12 for it in OSes other than OpenBSD. + */ +#ifdef __OpenBSD__ +#define DLT_LOOP 12 +#else +#define DLT_LOOP 108 +#endif + +/* + * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's + * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other + * than OpenBSD. + */ +#ifdef __OpenBSD__ +#define DLT_ENC 13 +#else +#define DLT_ENC 109 +#endif + +/* + * Values between 110 and 112 are reserved for use in capture file headers + * as link-layer types corresponding to DLT_ types that might differ + * between platforms; don't use those values for new DLT_ types + * other than the corresponding DLT_ types. + */ + +/* + * This is for Linux cooked sockets. + */ +#define DLT_LINUX_SLL 113 + +/* + * Apple LocalTalk hardware. + */ +#define DLT_LTALK 114 + +/* + * Acorn Econet. + */ +#define DLT_ECONET 115 + +/* + * Reserved for use with OpenBSD ipfilter. + */ +#define DLT_IPFILTER 116 + +/* + * OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, but that's DLT_LANE8023 + * in SuSE 6.3, so we can't use 17 for it in capture-file headers. + * + * XXX: is there a conflict with DLT_PFSYNC 18 as well? + */ +#ifdef __OpenBSD__ +#define DLT_OLD_PFLOG 17 +#define DLT_PFSYNC 18 +#endif +#define DLT_PFLOG 117 + +/* + * Registered for Cisco-internal use. + */ +#define DLT_CISCO_IOS 118 + +/* + * For 802.11 cards using the Prism II chips, with a link-layer + * header including Prism monitor mode information plus an 802.11 + * header. + */ +#define DLT_PRISM_HEADER 119 + +/* + * Reserved for Aironet 802.11 cards, with an Aironet link-layer header + * (see Doug Ambrisko's FreeBSD patches). + */ +#define DLT_AIRONET_HEADER 120 + +/* + * Reserved for Siemens HiPath HDLC. + */ +#define DLT_HHDLC 121 + +/* + * This is for RFC 2625 IP-over-Fibre Channel. + * + * This is not for use with raw Fibre Channel, where the link-layer + * header starts with a Fibre Channel frame header; it's for IP-over-FC, + * where the link-layer header starts with an RFC 2625 Network_Header + * field. + */ +#define DLT_IP_OVER_FC 122 + +/* + * This is for Full Frontal ATM on Solaris with SunATM, with a + * pseudo-header followed by an AALn PDU. + * + * There may be other forms of Full Frontal ATM on other OSes, + * with different pseudo-headers. + * + * If ATM software returns a pseudo-header with VPI/VCI information + * (and, ideally, packet type information, e.g. signalling, ILMI, + * LANE, LLC-multiplexed traffic, etc.), it should not use + * DLT_ATM_RFC1483, but should get a new DLT_ value, so tcpdump + * and the like don't have to infer the presence or absence of a + * pseudo-header and the form of the pseudo-header. + */ +#define DLT_SUNATM 123 /* Solaris+SunATM */ + +/* + * Reserved as per request from Kent Dahlgren + * for private use. + */ +#define DLT_RIO 124 /* RapidIO */ +#define DLT_PCI_EXP 125 /* PCI Express */ +#define DLT_AURORA 126 /* Xilinx Aurora link layer */ + +/* + * Header for 802.11 plus a number of bits of link-layer information + * including radio information, used by some recent BSD drivers as + * well as the madwifi Atheros driver for Linux. + */ +#define DLT_IEEE802_11_RADIO 127 /* 802.11 plus radiotap radio header */ + +/* + * Reserved for the TZSP encapsulation, as per request from + * Chris Waters + * TZSP is a generic encapsulation for any other link type, + * which includes a means to include meta-information + * with the packet, e.g. signal strength and channel + * for 802.11 packets. + */ +#define DLT_TZSP 128 /* Tazmen Sniffer Protocol */ + +/* + * BSD's ARCNET headers have the source host, destination host, + * and type at the beginning of the packet; that's what's handed + * up to userland via BPF. + * + * Linux's ARCNET headers, however, have a 2-byte offset field + * between the host IDs and the type; that's what's handed up + * to userland via PF_PACKET sockets. + * + * We therefore have to have separate DLT_ values for them. + */ +#define DLT_ARCNET_LINUX 129 /* ARCNET */ + +/* + * Juniper-private data link types, as per request from + * Hannes Gredler . The DLT_s are used + * for passing on chassis-internal metainformation such as + * QOS profiles, etc.. + */ +#define DLT_JUNIPER_MLPPP 130 +#define DLT_JUNIPER_MLFR 131 +#define DLT_JUNIPER_ES 132 +#define DLT_JUNIPER_GGSN 133 +#define DLT_JUNIPER_MFR 134 +#define DLT_JUNIPER_ATM2 135 +#define DLT_JUNIPER_SERVICES 136 +#define DLT_JUNIPER_ATM1 137 + +/* + * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund + * . The header that's presented is an Ethernet-like + * header: + * + * #define FIREWIRE_EUI64_LEN 8 + * struct firewire_header { + * u_char firewire_dhost[FIREWIRE_EUI64_LEN]; + * u_char firewire_shost[FIREWIRE_EUI64_LEN]; + * u_short firewire_type; + * }; + * + * with "firewire_type" being an Ethernet type value, rather than, + * for example, raw GASP frames being handed up. + */ +#define DLT_APPLE_IP_OVER_IEEE1394 138 + +/* + * Various SS7 encapsulations, as per a request from Jeff Morriss + * and subsequent discussions. + */ +#define DLT_MTP2_WITH_PHDR 139 /* pseudo-header with various info, followed by MTP2 */ +#define DLT_MTP2 140 /* MTP2, without pseudo-header */ +#define DLT_MTP3 141 /* MTP3, without pseudo-header or MTP2 */ +#define DLT_SCCP 142 /* SCCP, without pseudo-header or MTP2 or MTP3 */ + +/* + * DOCSIS MAC frames. + */ +#define DLT_DOCSIS 143 + +/* + * Linux-IrDA packets. Protocol defined at http://www.irda.org. + * Those packets include IrLAP headers and above (IrLMP...), but + * don't include Phy framing (SOF/EOF/CRC & byte stuffing), because Phy + * framing can be handled by the hardware and depend on the bitrate. + * This is exactly the format you would get capturing on a Linux-IrDA + * interface (irdaX), but not on a raw serial port. + * Note the capture is done in "Linux-cooked" mode, so each packet include + * a fake packet header (struct sll_header). This is because IrDA packet + * decoding is dependant on the direction of the packet (incomming or + * outgoing). + * When/if other platform implement IrDA capture, we may revisit the + * issue and define a real DLT_IRDA... + * Jean II + */ +#define DLT_LINUX_IRDA 144 + +/* + * Reserved for IBM SP switch and IBM Next Federation switch. + */ +#define DLT_IBM_SP 145 +#define DLT_IBM_SN 146 + +/* + * Reserved for private use. If you have some link-layer header type + * that you want to use within your organization, with the capture files + * using that link-layer header type not ever be sent outside your + * organization, you can use these values. + * + * No libpcap release will use these for any purpose, nor will any + * tcpdump release use them, either. + * + * Do *NOT* use these in capture files that you expect anybody not using + * your private versions of capture-file-reading tools to read; in + * particular, do *NOT* use them in products, otherwise you may find that + * people won't be able to use tcpdump, or snort, or Ethereal, or... to + * read capture files from your firewall/intrusion detection/traffic + * monitoring/etc. appliance, or whatever product uses that DLT_ value, + * and you may also find that the developers of those applications will + * not accept patches to let them read those files. + * + * Also, do not use them if somebody might send you a capture using them + * for *their* private type and tools using them for *your* private type + * would have to read them. + * + * Instead, ask "tcpdump-workers@lists.tcpdump.org" for a new DLT_ value, + * as per the comment above, and use the type you're given. + */ +#define DLT_USER0 147 +#define DLT_USER1 148 +#define DLT_USER2 149 +#define DLT_USER3 150 +#define DLT_USER4 151 +#define DLT_USER5 152 +#define DLT_USER6 153 +#define DLT_USER7 154 +#define DLT_USER8 155 +#define DLT_USER9 156 +#define DLT_USER10 157 +#define DLT_USER11 158 +#define DLT_USER12 159 +#define DLT_USER13 160 +#define DLT_USER14 161 +#define DLT_USER15 162 + +/* + * For future use with 802.11 captures - defined by AbsoluteValue + * Systems to store a number of bits of link-layer information + * including radio information: + * + * http://www.shaftnet.org/~pizza/software/capturefrm.txt + * + * but it might be used by some non-AVS drivers now or in the + * future. + */ +#define DLT_IEEE802_11_RADIO_AVS 163 /* 802.11 plus AVS radio header */ + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . The DLT_s are used + * for passing on chassis-internal metainformation such as + * QOS profiles, etc.. + */ +#define DLT_JUNIPER_MONITOR 164 + +/* + * Reserved for BACnet MS/TP. + */ +#define DLT_BACNET_MS_TP 165 + +/* + * Another PPP variant as per request from Karsten Keil . + * + * This is used in some OSes to allow a kernel socket filter to distinguish + * between incoming and outgoing packets, on a socket intended to + * supply pppd with outgoing packets so it can do dial-on-demand and + * hangup-on-lack-of-demand; incoming packets are filtered out so they + * don't cause pppd to hold the connection up (you don't want random + * input packets such as port scans, packets from old lost connections, + * etc. to force the connection to stay up). + * + * The first byte of the PPP header (0xff03) is modified to accomodate + * the direction - 0x00 = IN, 0x01 = OUT. + */ +#define DLT_PPP_PPPD 166 + +/* + * Names for backwards compatibility with older versions of some PPP + * software; new software should use DLT_PPP_PPPD. + */ +#define DLT_PPP_WITH_DIRECTION DLT_PPP_PPPD +#define DLT_LINUX_PPP_WITHDIRECTION DLT_PPP_PPPD + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . The DLT_s are used + * for passing on chassis-internal metainformation such as + * QOS profiles, cookies, etc.. + */ +#define DLT_JUNIPER_PPPOE 167 +#define DLT_JUNIPER_PPPOE_ATM 168 + +#define DLT_GPRS_LLC 169 /* GPRS LLC */ +#define DLT_GPF_T 170 /* GPF-T (ITU-T G.7041/Y.1303) */ +#define DLT_GPF_F 171 /* GPF-F (ITU-T G.7041/Y.1303) */ + +/* + * Requested by Oolan Zimmer for use in Gcom's T1/E1 line + * monitoring equipment. + */ +#define DLT_GCOM_T1E1 172 +#define DLT_GCOM_SERIAL 173 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . The DLT_ is used + * for internal communication to Physical Interface Cards (PIC) + */ +#define DLT_JUNIPER_PIC_PEER 174 + +/* + * Link types requested by Gregor Maier of Endace + * Measurement Systems. They add an ERF header (see + * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of + * the link-layer header. + */ +#define DLT_ERF_ETH 175 /* Ethernet */ +#define DLT_ERF_POS 176 /* Packet-over-SONET */ + +/* + * Requested by Daniele Orlandi for raw LAPD + * for vISDN (http://www.orlandi.com/visdn/). Its link-layer header + * includes additional information before the LAPD header, so it's + * not necessarily a generic LAPD header. + */ +#define DLT_LINUX_LAPD 177 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . + * The DLT_ are used for prepending meta-information + * like interface index, interface name + * before standard Ethernet, PPP, Frelay & C-HDLC Frames + */ +#define DLT_JUNIPER_ETHER 178 +#define DLT_JUNIPER_PPP 179 +#define DLT_JUNIPER_FRELAY 180 +#define DLT_JUNIPER_CHDLC 181 + +/* + * Multi Link Frame Relay (FRF.16) + */ +#define DLT_MFR 182 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . + * The DLT_ is used for internal communication with a + * voice Adapter Card (PIC) + */ +#define DLT_JUNIPER_VP 183 + +/* + * Arinc 429 frames. + * DLT_ requested by Gianluca Varenni . + * Every frame contains a 32bit A429 label. + * More documentation on Arinc 429 can be found at + * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf + */ +#define DLT_A429 184 + +/* + * Arinc 653 Interpartition Communication messages. + * DLT_ requested by Gianluca Varenni . + * Please refer to the A653-1 standard for more information. + */ +#define DLT_A653_ICM 185 + +/* + * USB packets, beginning with a USB setup header; requested by + * Paolo Abeni . + */ +#define DLT_USB 186 + +/* + * Bluetooth HCI UART transport layer (part H:4); requested by + * Paolo Abeni. + */ +#define DLT_BLUETOOTH_HCI_H4 187 + +/* + * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz + * . + */ +#define DLT_IEEE802_16_MAC_CPS 188 + +/* + * USB packets, beginning with a Linux USB header; requested by + * Paolo Abeni . + */ +#define DLT_USB_LINUX 189 + +/* + * Controller Area Network (CAN) v. 2.0B packets. + * DLT_ requested by Gianluca Varenni . + * Used to dump CAN packets coming from a CAN Vector board. + * More documentation on the CAN v2.0B frames can be found at + * http://www.can-cia.org/downloads/?269 + */ +#define DLT_CAN20B 190 + +/* + * IEEE 802.15.4, with address fields padded, as is done by Linux + * drivers; requested by Juergen Schimmer. + */ +#define DLT_IEEE802_15_4_LINUX 191 + +/* + * Per Packet Information encapsulated packets. + * DLT_ requested by Gianluca Varenni . + */ +#define DLT_PPI 192 + +/* + * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header; + * requested by Charles Clancy. + */ +#define DLT_IEEE802_16_MAC_CPS_RADIO 193 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . + * The DLT_ is used for internal communication with a + * integrated service module (ISM). + */ +#define DLT_JUNIPER_ISM 194 + +/* + * IEEE 802.15.4, exactly as it appears in the spec (no padding, no + * nothing); requested by Mikko Saarnivala . + */ +#define DLT_IEEE802_15_4 195 + +/* + * Various link-layer types, with a pseudo-header, for SITA + * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com). + */ +#define DLT_SITA 196 + +/* + * Various link-layer types, with a pseudo-header, for Endace DAG cards; + * encapsulates Endace ERF records. Requested by Stephen Donnelly + * . + */ +#define DLT_ERF 197 + +/* + * Special header prepended to Ethernet packets when capturing from a + * u10 Networks board. Requested by Phil Mulholland + * . + */ +#define DLT_RAIF1 198 + +/* + * IPMB packet for IPMI, beginning with the I2C slave address, followed + * by the netFn and LUN, etc.. Requested by Chanthy Toeung + * . + */ +#define DLT_IPMB 199 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . + * The DLT_ is used for capturing data on a secure tunnel interface. + */ +#define DLT_JUNIPER_ST 200 + +/* + * Bluetooth HCI UART transport layer (part H:4), with pseudo-header + * that includes direction information; requested by Paolo Abeni. + */ +#define DLT_BLUETOOTH_HCI_H4_WITH_PHDR 201 + +/* + * AX.25 packet with a 1-byte KISS header; see + * + * http://www.ax25.net/kiss.htm + * + * as per Richard Stearn . + */ +#define DLT_AX25_KISS 202 + +/* + * LAPD packets from an ISDN channel, starting with the address field, + * with no pseudo-header. + * Requested by Varuna De Silva . + */ +#define DLT_LAPD 203 + +/* + * Variants of various link-layer headers, with a one-byte direction + * pseudo-header prepended - zero means "received by this host", + * non-zero (any non-zero value) means "sent by this host" - as per + * Will Barker . + */ +#define DLT_PPP_WITH_DIR 204 /* PPP - don't confuse with DLT_PPP_WITH_DIRECTION */ +#define DLT_C_HDLC_WITH_DIR 205 /* Cisco HDLC */ +#define DLT_FRELAY_WITH_DIR 206 /* Frame Relay */ +#define DLT_LAPB_WITH_DIR 207 /* LAPB */ + +/* + * 208 is reserved for an as-yet-unspecified proprietary link-layer + * type, as requested by Will Barker. + */ + +/* + * IPMB with a Linux-specific pseudo-header; as requested by Alexey Neyman + * . + */ +#define DLT_IPMB_LINUX 209 + +/* + * FlexRay automotive bus - http://www.flexray.com/ - as requested + * by Hannes Kaelber . + */ +#define DLT_FLEXRAY 210 + +/* + * Media Oriented Systems Transport (MOST) bus for multimedia + * transport - http://www.mostcooperation.com/ - as requested + * by Hannes Kaelber . + */ +#define DLT_MOST 211 + +/* + * Local Interconnect Network (LIN) bus for vehicle networks - + * http://www.lin-subbus.org/ - as requested by Hannes Kaelber + * . + */ +#define DLT_LIN 212 + +/* + * X2E-private data link type used for serial line capture, + * as requested by Hannes Kaelber . + */ +#define DLT_X2E_SERIAL 213 + +/* + * X2E-private data link type used for the Xoraya data logger + * family, as requested by Hannes Kaelber . + */ +#define DLT_X2E_XORAYA 214 + +/* + * IEEE 802.15.4, exactly as it appears in the spec (no padding, no + * nothing), but with the PHY-level data for non-ASK PHYs (4 octets + * of 0 as preamble, one octet of SFD, one octet of frame length+ + * reserved bit, and then the MAC-layer data, starting with the + * frame control field). + * + * Requested by Max Filippov . + */ +#define DLT_IEEE802_15_4_NONASK_PHY 215 + + +/* + * DLT and savefile link type values are split into a class and + * a member of that class. A class value of 0 indicates a regular + * DLT_/LINKTYPE_ value. + */ +#define DLT_CLASS(x) ((x) & 0x03ff0000) + +/* + * NetBSD-specific generic "raw" link type. The class value indicates + * that this is the generic raw type, and the lower 16 bits are the + * address family we're dealing with. Those values are NetBSD-specific; + * do not assume that they correspond to AF_ values for your operating + * system. + */ +#define DLT_CLASS_NETBSD_RAWAF 0x02240000 +#define DLT_NETBSD_RAWAF(af) (DLT_CLASS_NETBSD_RAWAF | (af)) +#define DLT_NETBSD_RAWAF_AF(x) ((x) & 0x0000ffff) +#define DLT_IS_NETBSD_RAWAF(x) (DLT_CLASS(x) == DLT_CLASS_NETBSD_RAWAF) + + +/* + * The instruction encodings. + */ +/* instruction classes */ +#define BPF_CLASS(code) ((code) & 0x07) +#define BPF_LD 0x00 +#define BPF_LDX 0x01 +#define BPF_ST 0x02 +#define BPF_STX 0x03 +#define BPF_ALU 0x04 +#define BPF_JMP 0x05 +#define BPF_RET 0x06 +#define BPF_MISC 0x07 + +/* ld/ldx fields */ +#define BPF_SIZE(code) ((code) & 0x18) +#define BPF_W 0x00 +#define BPF_H 0x08 +#define BPF_B 0x10 +#define BPF_MODE(code) ((code) & 0xe0) +#define BPF_IMM 0x00 +#define BPF_ABS 0x20 +#define BPF_IND 0x40 +#define BPF_MEM 0x60 +#define BPF_LEN 0x80 +#define BPF_MSH 0xa0 + +/* alu/jmp fields */ +#define BPF_OP(code) ((code) & 0xf0) +#define BPF_ADD 0x00 +#define BPF_SUB 0x10 +#define BPF_MUL 0x20 +#define BPF_DIV 0x30 +#define BPF_OR 0x40 +#define BPF_AND 0x50 +#define BPF_LSH 0x60 +#define BPF_RSH 0x70 +#define BPF_NEG 0x80 +#define BPF_JA 0x00 +#define BPF_JEQ 0x10 +#define BPF_JGT 0x20 +#define BPF_JGE 0x30 +#define BPF_JSET 0x40 +#define BPF_SRC(code) ((code) & 0x08) +#define BPF_K 0x00 +#define BPF_X 0x08 + +/* ret - BPF_K and BPF_X also apply */ +#define BPF_RVAL(code) ((code) & 0x18) +#define BPF_A 0x10 + +/* misc */ +#define BPF_MISCOP(code) ((code) & 0xf8) +#define BPF_TAX 0x00 +#define BPF_TXA 0x80 + +/* + * The instruction data structure. + */ +struct bpf_insn { + u_short code; + u_char jt; + u_char jf; + bpf_u_int32 k; +}; + +/* + * Macros for insn array initializers. + */ +#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k } +#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k } + +#if __STDC__ || defined(__cplusplus) +extern int bpf_validate(const struct bpf_insn *, int); +extern u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int); +#else +extern int bpf_validate(); +extern u_int bpf_filter(); +#endif + +/* + * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST). + */ +#define BPF_MEMWORDS 16 + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/namedb.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/namedb.h new file mode 100644 index 0000000000..9002c75093 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/namedb.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 1994, 1996 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the Computer Systems + * Engineering Group at Lawrence Berkeley Laboratory. + * 4. Neither the name of the University nor of the Laboratory may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/namedb.h,v 1.1 2006/10/04 18:09:22 guy Exp $ (LBL) + */ + +#ifndef lib_pcap_namedb_h +#define lib_pcap_namedb_h + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * As returned by the pcap_next_etherent() + * XXX this stuff doesn't belong in this interface, but this + * library already must do name to address translation, so + * on systems that don't have support for /etc/ethers, we + * export these hooks since they'll + */ +struct pcap_etherent { + u_char addr[6]; + char name[122]; +}; +#ifndef PCAP_ETHERS_FILE +#define PCAP_ETHERS_FILE "/etc/ethers" +#endif +struct pcap_etherent *pcap_next_etherent(FILE *); +u_char *pcap_ether_hostton(const char*); +u_char *pcap_ether_aton(const char *); + +bpf_u_int32 **pcap_nametoaddr(const char *); +#ifdef INET6 +struct addrinfo *pcap_nametoaddrinfo(const char *); +#endif +bpf_u_int32 pcap_nametonetaddr(const char *); + +int pcap_nametoport(const char *, int *, int *); +int pcap_nametoportrange(const char *, int *, int *, int *); +int pcap_nametoproto(const char *); +int pcap_nametoeproto(const char *); +int pcap_nametollc(const char *); +/* + * If a protocol is unknown, PROTO_UNDEF is returned. + * Also, pcap_nametoport() returns the protocol along with the port number. + * If there are ambiguous entried in /etc/services (i.e. domain + * can be either tcp or udp) PROTO_UNDEF is returned. + */ +#define PROTO_UNDEF -1 + +/* XXX move these to pcap-int.h? */ +int __pcap_atodn(const char *, bpf_u_int32 *); +int __pcap_atoin(const char *, bpf_u_int32 *); +u_short __pcap_nametodnaddr(const char *); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/pcap.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/pcap.h new file mode 100644 index 0000000000..ad8fc40ac1 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/pcap.h @@ -0,0 +1,407 @@ +/* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */ +/* + * Copyright (c) 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the Computer Systems + * Engineering Group at Lawrence Berkeley Laboratory. + * 4. Neither the name of the University nor of the Laboratory may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/pcap.h,v 1.4.2.11 2008-10-06 15:38:39 gianluca Exp $ (LBL) + */ + +#ifndef lib_pcap_pcap_h +#define lib_pcap_pcap_h + +#if defined(WIN32) + #include +#elif defined(MSDOS) + #include + #include /* u_int, u_char etc. */ +#else /* UN*X */ + #include + #include +#endif /* WIN32/MSDOS/UN*X */ + +#ifndef PCAP_DONT_INCLUDE_PCAP_BPF_H +#include +#endif + +#include + +#ifdef HAVE_REMOTE + // We have to define the SOCKET here, although it has been defined in sockutils.h + // This is to avoid the distribution of the 'sockutils.h' file around + // (for example in the WinPcap developer's pack) + #ifndef SOCKET + #ifdef WIN32 + #define SOCKET unsigned int + #else + #define SOCKET int + #endif + #endif +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +#define PCAP_VERSION_MAJOR 2 +#define PCAP_VERSION_MINOR 4 + +#define PCAP_ERRBUF_SIZE 256 + +/* + * Compatibility for systems that have a bpf.h that + * predates the bpf typedefs for 64-bit support. + */ +#if BPF_RELEASE - 0 < 199406 +typedef int bpf_int32; +typedef u_int bpf_u_int32; +#endif + +typedef struct pcap pcap_t; +typedef struct pcap_dumper pcap_dumper_t; +typedef struct pcap_if pcap_if_t; +typedef struct pcap_addr pcap_addr_t; + +/* + * The first record in the file contains saved values for some + * of the flags used in the printout phases of tcpdump. + * Many fields here are 32 bit ints so compilers won't insert unwanted + * padding; these files need to be interchangeable across architectures. + * + * Do not change the layout of this structure, in any way (this includes + * changes that only affect the length of fields in this structure). + * + * Also, do not change the interpretation of any of the members of this + * structure, in any way (this includes using values other than + * LINKTYPE_ values, as defined in "savefile.c", in the "linktype" + * field). + * + * Instead: + * + * introduce a new structure for the new format, if the layout + * of the structure changed; + * + * send mail to "tcpdump-workers@lists.tcpdump.org", requesting + * a new magic number for your new capture file format, and, when + * you get the new magic number, put it in "savefile.c"; + * + * use that magic number for save files with the changed file + * header; + * + * make the code in "savefile.c" capable of reading files with + * the old file header as well as files with the new file header + * (using the magic number to determine the header format). + * + * Then supply the changes as a patch at + * + * http://sourceforge.net/projects/libpcap/ + * + * so that future versions of libpcap and programs that use it (such as + * tcpdump) will be able to read your new capture file format. + */ +struct pcap_file_header { + bpf_u_int32 magic; + u_short version_major; + u_short version_minor; + bpf_int32 thiszone; /* gmt to local correction */ + bpf_u_int32 sigfigs; /* accuracy of timestamps */ + bpf_u_int32 snaplen; /* max length saved portion of each pkt */ + bpf_u_int32 linktype; /* data link type (LINKTYPE_*) */ +}; + +/* + * Macros for the value returned by pcap_datalink_ext(). + * + * If LT_FCS_LENGTH_PRESENT(x) is true, the LT_FCS_LENGTH(x) macro + * gives the FCS length of packets in the capture. + */ +#define LT_FCS_LENGTH_PRESENT(x) ((x) & 0x04000000) +#define LT_FCS_LENGTH(x) (((x) & 0xF0000000) >> 28) +#define LT_FCS_DATALINK_EXT(x) ((((x) & 0xF) << 28) | 0x04000000) + +typedef enum { + PCAP_D_INOUT = 0, + PCAP_D_IN, + PCAP_D_OUT +} pcap_direction_t; + +/* + * Generic per-packet information, as supplied by libpcap. + * + * The time stamp can and should be a "struct timeval", regardless of + * whether your system supports 32-bit tv_sec in "struct timeval", + * 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit + * and 64-bit applications. The on-disk format of savefiles uses 32-bit + * tv_sec (and tv_usec); this structure is irrelevant to that. 32-bit + * and 64-bit versions of libpcap, even if they're on the same platform, + * should supply the appropriate version of "struct timeval", even if + * that's not what the underlying packet capture mechanism supplies. + */ +struct pcap_pkthdr { + struct timeval ts; /* time stamp */ + bpf_u_int32 caplen; /* length of portion present */ + bpf_u_int32 len; /* length this packet (off wire) */ +}; + +/* + * As returned by the pcap_stats() + */ +struct pcap_stat { + u_int ps_recv; /* number of packets received */ + u_int ps_drop; /* number of packets dropped */ + u_int ps_ifdrop; /* drops by interface XXX not yet supported */ +#ifdef HAVE_REMOTE + u_int ps_capt; /* number of packets that are received by the application; please get rid off the Win32 ifdef */ + u_int ps_sent; /* number of packets sent by the server on the network */ + u_int ps_netdrop; /* number of packets lost on the network */ +#endif /* HAVE_REMOTE */ +}; + +#ifdef MSDOS +/* + * As returned by the pcap_stats_ex() + */ +struct pcap_stat_ex { + u_long rx_packets; /* total packets received */ + u_long tx_packets; /* total packets transmitted */ + u_long rx_bytes; /* total bytes received */ + u_long tx_bytes; /* total bytes transmitted */ + u_long rx_errors; /* bad packets received */ + u_long tx_errors; /* packet transmit problems */ + u_long rx_dropped; /* no space in Rx buffers */ + u_long tx_dropped; /* no space available for Tx */ + u_long multicast; /* multicast packets received */ + u_long collisions; + + /* detailed rx_errors: */ + u_long rx_length_errors; + u_long rx_over_errors; /* receiver ring buff overflow */ + u_long rx_crc_errors; /* recv'd pkt with crc error */ + u_long rx_frame_errors; /* recv'd frame alignment error */ + u_long rx_fifo_errors; /* recv'r fifo overrun */ + u_long rx_missed_errors; /* recv'r missed packet */ + + /* detailed tx_errors */ + u_long tx_aborted_errors; + u_long tx_carrier_errors; + u_long tx_fifo_errors; + u_long tx_heartbeat_errors; + u_long tx_window_errors; + }; +#endif + +/* + * Item in a list of interfaces. + */ +struct pcap_if { + struct pcap_if *next; + char *name; /* name to hand to "pcap_open_live()" */ + char *description; /* textual description of interface, or NULL */ + struct pcap_addr *addresses; + bpf_u_int32 flags; /* PCAP_IF_ interface flags */ +}; + +#define PCAP_IF_LOOPBACK 0x00000001 /* interface is loopback */ + +/* + * Representation of an interface address. + */ +struct pcap_addr { + struct pcap_addr *next; + struct sockaddr *addr; /* address */ + struct sockaddr *netmask; /* netmask for that address */ + struct sockaddr *broadaddr; /* broadcast address for that address */ + struct sockaddr *dstaddr; /* P2P destination address for that address */ +}; + +typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *, + const u_char *); + +/* + * Error codes for the pcap API. + * These will all be negative, so you can check for the success or + * failure of a call that returns these codes by checking for a + * negative value. + */ +#define PCAP_ERROR -1 /* generic error code */ +#define PCAP_ERROR_BREAK -2 /* loop terminated by pcap_breakloop */ +#define PCAP_ERROR_NOT_ACTIVATED -3 /* the capture needs to be activated */ +#define PCAP_ERROR_ACTIVATED -4 /* the operation can't be performed on already activated captures */ +#define PCAP_ERROR_NO_SUCH_DEVICE -5 /* no such device exists */ +#define PCAP_ERROR_RFMON_NOTSUP -6 /* this device doesn't support rfmon (monitor) mode */ +#define PCAP_ERROR_NOT_RFMON -7 /* operation supported only in monitor mode */ +#define PCAP_ERROR_PERM_DENIED -8 /* no permission to open the device */ +#define PCAP_ERROR_IFACE_NOT_UP -9 /* interface isn't up */ + +/* + * Warning codes for the pcap API. + * These will all be positive and non-zero, so they won't look like + * errors. + */ +#define PCAP_WARNING 1 /* generic warning code */ +#define PCAP_WARNING_PROMISC_NOTSUP 2 /* this device doesn't support promiscuous mode */ + +char *pcap_lookupdev(char *); +int pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *); + +pcap_t *pcap_create(const char *, char *); +int pcap_set_snaplen(pcap_t *, int); +int pcap_set_promisc(pcap_t *, int); +int pcap_can_set_rfmon(pcap_t *); +int pcap_set_rfmon(pcap_t *, int); +int pcap_set_timeout(pcap_t *, int); +int pcap_set_buffer_size(pcap_t *, int); +int pcap_activate(pcap_t *); + +pcap_t *pcap_open_live(const char *, int, int, int, char *); +pcap_t *pcap_open_dead(int, int); +pcap_t *pcap_open_offline(const char *, char *); +#if defined(WIN32) +pcap_t *pcap_hopen_offline(intptr_t, char *); +#if !defined(LIBPCAP_EXPORTS) +#define pcap_fopen_offline(f,b) \ + pcap_hopen_offline(_get_osfhandle(_fileno(f)), b) +#else /*LIBPCAP_EXPORTS*/ +static pcap_t *pcap_fopen_offline(FILE *, char *); +#endif +#else /*WIN32*/ +pcap_t *pcap_fopen_offline(FILE *, char *); +#endif /*WIN32*/ + +void pcap_close(pcap_t *); +int pcap_loop(pcap_t *, int, pcap_handler, u_char *); +int pcap_dispatch(pcap_t *, int, pcap_handler, u_char *); +const u_char* + pcap_next(pcap_t *, struct pcap_pkthdr *); +int pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **); +void pcap_breakloop(pcap_t *); +int pcap_stats(pcap_t *, struct pcap_stat *); +int pcap_setfilter(pcap_t *, struct bpf_program *); +int pcap_setdirection(pcap_t *, pcap_direction_t); +int pcap_getnonblock(pcap_t *, char *); +int pcap_setnonblock(pcap_t *, int, char *); +int pcap_inject(pcap_t *, const void *, size_t); +int pcap_sendpacket(pcap_t *, const u_char *, int); +const char *pcap_statustostr(int); +const char *pcap_strerror(int); +char *pcap_geterr(pcap_t *); +void pcap_perror(pcap_t *, char *); +int pcap_compile(pcap_t *, struct bpf_program *, const char *, int, + bpf_u_int32); +int pcap_compile_nopcap(int, int, struct bpf_program *, + const char *, int, bpf_u_int32); +void pcap_freecode(struct bpf_program *); +int pcap_offline_filter(struct bpf_program *, const struct pcap_pkthdr *, + const u_char *); +int pcap_datalink(pcap_t *); +int pcap_datalink_ext(pcap_t *); +int pcap_list_datalinks(pcap_t *, int **); +int pcap_set_datalink(pcap_t *, int); +void pcap_free_datalinks(int *); +int pcap_datalink_name_to_val(const char *); +const char *pcap_datalink_val_to_name(int); +const char *pcap_datalink_val_to_description(int); +int pcap_snapshot(pcap_t *); +int pcap_is_swapped(pcap_t *); +int pcap_major_version(pcap_t *); +int pcap_minor_version(pcap_t *); + +/* XXX */ +FILE *pcap_file(pcap_t *); +int pcap_fileno(pcap_t *); + +pcap_dumper_t *pcap_dump_open(pcap_t *, const char *); +pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp); +FILE *pcap_dump_file(pcap_dumper_t *); +long pcap_dump_ftell(pcap_dumper_t *); +int pcap_dump_flush(pcap_dumper_t *); +void pcap_dump_close(pcap_dumper_t *); +void pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *); + +int pcap_findalldevs(pcap_if_t **, char *); +void pcap_freealldevs(pcap_if_t *); + +const char *pcap_lib_version(void); + +/* XXX this guy lives in the bpf tree */ +u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int); +int bpf_validate(const struct bpf_insn *f, int len); +char *bpf_image(const struct bpf_insn *, int); +void bpf_dump(const struct bpf_program *, int); + +#if defined(WIN32) + +/* + * Win32 definitions + */ + +int pcap_setbuff(pcap_t *p, int dim); +int pcap_setmode(pcap_t *p, int mode); +int pcap_setmintocopy(pcap_t *p, int size); + +#ifdef WPCAP +/* Include file with the wpcap-specific extensions */ +#include +#endif /* WPCAP */ + +#define MODE_CAPT 0 +#define MODE_STAT 1 +#define MODE_MON 2 + +#elif defined(MSDOS) + +/* + * MS-DOS definitions + */ + +int pcap_stats_ex (pcap_t *, struct pcap_stat_ex *); +void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait); +u_long pcap_mac_packets (void); + +#else /* UN*X */ + +/* + * UN*X definitions + */ + +int pcap_get_selectable_fd(pcap_t *); + +#endif /* WIN32/MSDOS/UN*X */ + +#ifdef HAVE_REMOTE +/* Includes most of the public stuff that is needed for the remote capture */ +#include +#endif /* HAVE_REMOTE */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/sll.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/sll.h new file mode 100644 index 0000000000..e9d5452af7 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/sll.h @@ -0,0 +1,129 @@ +/*- + * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from the Stanford/CMU enet packet filter, + * (net/enet.c) distributed as part of 4.3BSD, and code contributed + * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence + * Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/sll.h,v 1.2.2.1 2008-05-30 01:36:06 guy Exp $ (LBL) + */ + +/* + * For captures on Linux cooked sockets, we construct a fake header + * that includes: + * + * a 2-byte "packet type" which is one of: + * + * LINUX_SLL_HOST packet was sent to us + * LINUX_SLL_BROADCAST packet was broadcast + * LINUX_SLL_MULTICAST packet was multicast + * LINUX_SLL_OTHERHOST packet was sent to somebody else + * LINUX_SLL_OUTGOING packet was sent *by* us; + * + * a 2-byte Ethernet protocol field; + * + * a 2-byte link-layer type; + * + * a 2-byte link-layer address length; + * + * an 8-byte source link-layer address, whose actual length is + * specified by the previous value. + * + * All fields except for the link-layer address are in network byte order. + * + * DO NOT change the layout of this structure, or change any of the + * LINUX_SLL_ values below. If you must change the link-layer header + * for a "cooked" Linux capture, introduce a new DLT_ type (ask + * "tcpdump-workers@lists.tcpdump.org" for one, so that you don't give it + * a value that collides with a value already being used), and use the + * new header in captures of that type, so that programs that can + * handle DLT_LINUX_SLL captures will continue to handle them correctly + * without any change, and so that capture files with different headers + * can be told apart and programs that read them can dissect the + * packets in them. + */ + +#ifndef lib_pcap_sll_h +#define lib_pcap_sll_h + +/* + * A DLT_LINUX_SLL fake link-layer header. + */ +#define SLL_HDR_LEN 16 /* total header length */ +#define SLL_ADDRLEN 8 /* length of address field */ + +struct sll_header { + u_int16_t sll_pkttype; /* packet type */ + u_int16_t sll_hatype; /* link-layer address type */ + u_int16_t sll_halen; /* link-layer address length */ + u_int8_t sll_addr[SLL_ADDRLEN]; /* link-layer address */ + u_int16_t sll_protocol; /* protocol */ +}; + +/* + * The LINUX_SLL_ values for "sll_pkttype"; these correspond to the + * PACKET_ values on Linux, but are defined here so that they're + * available even on systems other than Linux, and so that they + * don't change even if the PACKET_ values change. + */ +#define LINUX_SLL_HOST 0 +#define LINUX_SLL_BROADCAST 1 +#define LINUX_SLL_MULTICAST 2 +#define LINUX_SLL_OTHERHOST 3 +#define LINUX_SLL_OUTGOING 4 + +/* + * The LINUX_SLL_ values for "sll_protocol"; these correspond to the + * ETH_P_ values on Linux, but are defined here so that they're + * available even on systems other than Linux. We assume, for now, + * that the ETH_P_ values won't change in Linux; if they do, then: + * + * if we don't translate them in "pcap-linux.c", capture files + * won't necessarily be readable if captured on a system that + * defines ETH_P_ values that don't match these values; + * + * if we do translate them in "pcap-linux.c", that makes life + * unpleasant for the BPF code generator, as the values you test + * for in the kernel aren't the values that you test for when + * reading a capture file, so the fixup code run on BPF programs + * handed to the kernel ends up having to do more work. + * + * Add other values here as necessary, for handling packet types that + * might show up on non-Ethernet, non-802.x networks. (Not all the ones + * in the Linux "if_ether.h" will, I suspect, actually show up in + * captures.) + */ +#define LINUX_SLL_P_802_3 0x0001 /* Novell 802.3 frames without 802.2 LLC header */ +#define LINUX_SLL_P_802_2 0x0004 /* 802.2 frames (not D/I/X Ethernet) */ + +#endif diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/usb.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/usb.h new file mode 100644 index 0000000000..adcd19c058 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/usb.h @@ -0,0 +1,90 @@ +/* + * Copyright (c) 2006 Paolo Abeni (Italy) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Basic USB data struct + * By Paolo Abeni + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/usb.h,v 1.6 2007/09/22 02:06:08 guy Exp $ + */ + +#ifndef _PCAP_USB_STRUCTS_H__ +#define _PCAP_USB_STRUCTS_H__ + +/* + * possible transfer mode + */ +#define URB_TRANSFER_IN 0x80 +#define URB_ISOCHRONOUS 0x0 +#define URB_INTERRUPT 0x1 +#define URB_CONTROL 0x2 +#define URB_BULK 0x3 + +/* + * possible event type + */ +#define URB_SUBMIT 'S' +#define URB_COMPLETE 'C' +#define URB_ERROR 'E' + +/* + * USB setup header as defined in USB specification. + * Appears at the front of each packet in DLT_USB captures. + */ +typedef struct _usb_setup { + u_int8_t bmRequestType; + u_int8_t bRequest; + u_int16_t wValue; + u_int16_t wIndex; + u_int16_t wLength; +} pcap_usb_setup; + + +/* + * Header prepended by linux kernel to each event. + * Appears at the front of each packet in DLT_USB_LINUX captures. + */ +typedef struct _usb_header { + u_int64_t id; + u_int8_t event_type; + u_int8_t transfer_type; + u_int8_t endpoint_number; + u_int8_t device_address; + u_int16_t bus_id; + char setup_flag;/*if !=0 the urb setup header is not present*/ + char data_flag; /*if !=0 no urb data is present*/ + int64_t ts_sec; + int32_t ts_usec; + int32_t status; + u_int32_t urb_len; + u_int32_t data_len; /* amount of urb data really present in this event*/ + pcap_usb_setup setup; +} pcap_usb_header; + + +#endif diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/vlan.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/vlan.h new file mode 100644 index 0000000000..b0cb7949be --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/pcap/vlan.h @@ -0,0 +1,46 @@ +/*- + * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/vlan.h,v 1.1.2.2 2008-08-06 07:45:59 guy Exp $ + */ + +#ifndef lib_pcap_vlan_h +#define lib_pcap_vlan_h + +struct vlan_tag { + u_int16_t vlan_tpid; /* ETH_P_8021Q */ + u_int16_t vlan_tci; /* VLAN TCI */ +}; + +#define VLAN_TAG_LEN 4 + +#endif diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/remote-ext.h b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/remote-ext.h new file mode 100644 index 0000000000..35a2fff6c2 --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/remote-ext.h @@ -0,0 +1,444 @@ +/* + * Copyright (c) 2002 - 2003 + * NetGroup, Politecnico di Torino (Italy) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Politecnico di Torino nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + +#ifndef __REMOTE_EXT_H__ +#define __REMOTE_EXT_H__ + + +#ifndef HAVE_REMOTE +#error Please do not include this file directly. Just define HAVE_REMOTE and then include pcap.h +#endif + +// Definition for Microsoft Visual Studio +#if _MSC_VER > 1000 +#pragma once +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/*! + \file remote-ext.h + + The goal of this file it to include most of the new definitions that should be + placed into the pcap.h file. + + It includes all new definitions (structures and functions like pcap_open(). + Some of the functions are not really a remote feature, but, right now, + they are placed here. +*/ + + + +// All this stuff is public +/*! \addtogroup remote_struct + \{ +*/ + + + + +/*! + \brief Defines the maximum buffer size in which address, port, interface names are kept. + + In case the adapter name or such is larger than this value, it is truncated. + This is not used by the user; however it must be aware that an hostname / interface + name longer than this value will be truncated. +*/ +#define PCAP_BUF_SIZE 1024 + + +/*! \addtogroup remote_source_ID + \{ +*/ + + +/*! + \brief Internal representation of the type of source in use (file, + remote/local interface). + + This indicates a file, i.e. the user want to open a capture from a local file. +*/ +#define PCAP_SRC_FILE 2 +/*! + \brief Internal representation of the type of source in use (file, + remote/local interface). + + This indicates a local interface, i.e. the user want to open a capture from + a local interface. This does not involve the RPCAP protocol. +*/ +#define PCAP_SRC_IFLOCAL 3 +/*! + \brief Internal representation of the type of source in use (file, + remote/local interface). + + This indicates a remote interface, i.e. the user want to open a capture from + an interface on a remote host. This does involve the RPCAP protocol. +*/ +#define PCAP_SRC_IFREMOTE 4 + +/*! + \} +*/ + + + +/*! \addtogroup remote_source_string + + The formats allowed by the pcap_open() are the following: + - file://path_and_filename [opens a local file] + - rpcap://devicename [opens the selected device devices available on the local host, without using the RPCAP protocol] + - rpcap://host/devicename [opens the selected device available on a remote host] + - rpcap://host:port/devicename [opens the selected device available on a remote host, using a non-standard port for RPCAP] + - adaptername [to open a local adapter; kept for compability, but it is strongly discouraged] + - (NULL) [to open the first local adapter; kept for compability, but it is strongly discouraged] + + The formats allowed by the pcap_findalldevs_ex() are the following: + - file://folder/ [lists all the files in the given folder] + - rpcap:// [lists all local adapters] + - rpcap://host:port/ [lists the devices available on a remote host] + + Referring to the 'host' and 'port' paramters, they can be either numeric or literal. Since + IPv6 is fully supported, these are the allowed formats: + + - host (literal): e.g. host.foo.bar + - host (numeric IPv4): e.g. 10.11.12.13 + - host (numeric IPv4, IPv6 style): e.g. [10.11.12.13] + - host (numeric IPv6): e.g. [1:2:3::4] + - port: can be either numeric (e.g. '80') or literal (e.g. 'http') + + Here you find some allowed examples: + - rpcap://host.foo.bar/devicename [everything literal, no port number] + - rpcap://host.foo.bar:1234/devicename [everything literal, with port number] + - rpcap://10.11.12.13/devicename [IPv4 numeric, no port number] + - rpcap://10.11.12.13:1234/devicename [IPv4 numeric, with port number] + - rpcap://[10.11.12.13]:1234/devicename [IPv4 numeric with IPv6 format, with port number] + - rpcap://[1:2:3::4]/devicename [IPv6 numeric, no port number] + - rpcap://[1:2:3::4]:1234/devicename [IPv6 numeric, with port number] + - rpcap://[1:2:3::4]:http/devicename [IPv6 numeric, with literal port number] + + \{ +*/ + + +/*! + \brief String that will be used to determine the type of source in use (file, + remote/local interface). + + This string will be prepended to the interface name in order to create a string + that contains all the information required to open the source. + + This string indicates that the user wants to open a capture from a local file. +*/ +#define PCAP_SRC_FILE_STRING "file://" +/*! + \brief String that will be used to determine the type of source in use (file, + remote/local interface). + + This string will be prepended to the interface name in order to create a string + that contains all the information required to open the source. + + This string indicates that the user wants to open a capture from a network interface. + This string does not necessarily involve the use of the RPCAP protocol. If the + interface required resides on the local host, the RPCAP protocol is not involved + and the local functions are used. +*/ +#define PCAP_SRC_IF_STRING "rpcap://" + +/*! + \} +*/ + + + + + +/*! + \addtogroup remote_open_flags + \{ +*/ + +/*! + \brief Defines if the adapter has to go in promiscuous mode. + + It is '1' if you have to open the adapter in promiscuous mode, '0' otherwise. + Note that even if this parameter is false, the interface could well be in promiscuous + mode for some other reason (for example because another capture process with + promiscuous mode enabled is currently using that interface). + On on Linux systems with 2.2 or later kernels (that have the "any" device), this + flag does not work on the "any" device; if an argument of "any" is supplied, + the 'promisc' flag is ignored. +*/ +#define PCAP_OPENFLAG_PROMISCUOUS 1 + +/*! + \brief Defines if the data trasfer (in case of a remote + capture) has to be done with UDP protocol. + + If it is '1' if you want a UDP data connection, '0' if you want + a TCP data connection; control connection is always TCP-based. + A UDP connection is much lighter, but it does not guarantee that all + the captured packets arrive to the client workstation. Moreover, + it could be harmful in case of network congestion. + This flag is meaningless if the source is not a remote interface. + In that case, it is simply ignored. +*/ +#define PCAP_OPENFLAG_DATATX_UDP 2 + + +/*! + \brief Defines if the remote probe will capture its own generated traffic. + + In case the remote probe uses the same interface to capture traffic and to send + data back to the caller, the captured traffic includes the RPCAP traffic as well. + If this flag is turned on, the RPCAP traffic is excluded from the capture, so that + the trace returned back to the collector is does not include this traffic. +*/ +#define PCAP_OPENFLAG_NOCAPTURE_RPCAP 4 + +/*! + \brief Defines if the local adapter will capture its own generated traffic. + + This flag tells the underlying capture driver to drop the packets that were sent by itself. + This is usefult when building applications like bridges, that should ignore the traffic + they just sent. +*/ +#define PCAP_OPENFLAG_NOCAPTURE_LOCAL 8 + +/*! + \brief This flag configures the adapter for maximum responsiveness. + + In presence of a large value for nbytes, WinPcap waits for the arrival of several packets before + copying the data to the user. This guarantees a low number of system calls, i.e. lower processor usage, + i.e. better performance, which is good for applications like sniffers. If the user sets the + PCAP_OPENFLAG_MAX_RESPONSIVENESS flag, the capture driver will copy the packets as soon as the application + is ready to receive them. This is suggested for real time applications (like, for example, a bridge) + that need the best responsiveness.*/ +#define PCAP_OPENFLAG_MAX_RESPONSIVENESS 16 + +/*! + \} +*/ + + +/*! + \addtogroup remote_samp_methods + \{ +*/ + +/*! + \brief No sampling has to be done on the current capture. + + In this case, no sampling algorithms are applied to the current capture. +*/ +#define PCAP_SAMP_NOSAMP 0 + +/*! + \brief It defines that only 1 out of N packets must be returned to the user. + + In this case, the 'value' field of the 'pcap_samp' structure indicates the + number of packets (minus 1) that must be discarded before one packet got accepted. + In other words, if 'value = 10', the first packet is returned to the caller, while + the following 9 are discarded. +*/ +#define PCAP_SAMP_1_EVERY_N 1 + +/*! + \brief It defines that we have to return 1 packet every N milliseconds. + + In this case, the 'value' field of the 'pcap_samp' structure indicates the 'waiting + time' in milliseconds before one packet got accepted. + In other words, if 'value = 10', the first packet is returned to the caller; the next + returned one will be the first packet that arrives when 10ms have elapsed. +*/ +#define PCAP_SAMP_FIRST_AFTER_N_MS 2 + +/*! + \} +*/ + + +/*! + \addtogroup remote_auth_methods + \{ +*/ + +/*! + \brief It defines the NULL authentication. + + This value has to be used within the 'type' member of the pcap_rmtauth structure. + The 'NULL' authentication has to be equal to 'zero', so that old applications + can just put every field of struct pcap_rmtauth to zero, and it does work. +*/ +#define RPCAP_RMTAUTH_NULL 0 +/*! + \brief It defines the username/password authentication. + + With this type of authentication, the RPCAP protocol will use the username/ + password provided to authenticate the user on the remote machine. If the + authentication is successful (and the user has the right to open network devices) + the RPCAP connection will continue; otherwise it will be dropped. + + This value has to be used within the 'type' member of the pcap_rmtauth structure. +*/ +#define RPCAP_RMTAUTH_PWD 1 + +/*! + \} +*/ + + + + +/*! + + \brief This structure keeps the information needed to autheticate + the user on a remote machine. + + The remote machine can either grant or refuse the access according + to the information provided. + In case the NULL authentication is required, both 'username' and + 'password' can be NULL pointers. + + This structure is meaningless if the source is not a remote interface; + in that case, the functions which requires such a structure can accept + a NULL pointer as well. +*/ +struct pcap_rmtauth +{ + /*! + \brief Type of the authentication required. + + In order to provide maximum flexibility, we can support different types + of authentication based on the value of this 'type' variable. The currently + supported authentication methods are defined into the + \link remote_auth_methods Remote Authentication Methods Section\endlink. + + */ + int type; + /*! + \brief Zero-terminated string containing the username that has to be + used on the remote machine for authentication. + + This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication + and it can be NULL. + */ + char *username; + /*! + \brief Zero-terminated string containing the password that has to be + used on the remote machine for authentication. + + This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication + and it can be NULL. + */ + char *password; +}; + + +/*! + \brief This structure defines the information related to sampling. + + In case the sampling is requested, the capturing device should read + only a subset of the packets coming from the source. The returned packets depend + on the sampling parameters. + + \warning The sampling process is applied after the filtering process. + In other words, packets are filtered first, then the sampling process selects a + subset of the 'filtered' packets and it returns them to the caller. +*/ +struct pcap_samp +{ + /*! + Method used for sampling. Currently, the supported methods are listed in the + \link remote_samp_methods Sampling Methods Section\endlink. + */ + int method; + + /*! + This value depends on the sampling method defined. For its meaning, please check + at the \link remote_samp_methods Sampling Methods Section\endlink. + */ + int value; +}; + + + + +//! Maximum lenght of an host name (needed for the RPCAP active mode) +#define RPCAP_HOSTLIST_SIZE 1024 + + +/*! + \} +*/ // end of public documentation + + +// Exported functions + + + +/** \name New WinPcap functions + + This section lists the new functions that are able to help considerably in writing + WinPcap programs because of their easiness of use. + */ +//\{ +pcap_t *pcap_open(const char *source, int snaplen, int flags, int read_timeout, struct pcap_rmtauth *auth, char *errbuf); +int pcap_createsrcstr(char *source, int type, const char *host, const char *port, const char *name, char *errbuf); +int pcap_parsesrcstr(const char *source, int *type, char *host, char *port, char *name, char *errbuf); +int pcap_findalldevs_ex(char *source, struct pcap_rmtauth *auth, pcap_if_t **alldevs, char *errbuf); +struct pcap_samp *pcap_setsampling(pcap_t *p); + +//\} +// End of new winpcap functions + + + +/** \name Remote Capture functions + */ +//\{ +SOCKET pcap_remoteact_accept(const char *address, const char *port, const char *hostlist, char *connectinghost, struct pcap_rmtauth *auth, char *errbuf); +int pcap_remoteact_list(char *hostlist, char sep, int size, char *errbuf); +int pcap_remoteact_close(const char *host, char *errbuf); +void pcap_remoteact_cleanup(); +//\} +// End of remote capture functions + +#ifdef __cplusplus +} +#endif + + +#endif + diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/wpcap.lib b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/wpcap.lib new file mode 100644 index 0000000000..f832e0445b Binary files /dev/null and b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/WinPCap/wpcap.lib differ diff --git a/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/main.c b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/main.c new file mode 100644 index 0000000000..f88041487e --- /dev/null +++ b/FreeRTOS-Plus/Test/FreeRTOS-Plus-TCP/Integration/Full-TCP-Suite/main.c @@ -0,0 +1,345 @@ +/* +* FreeRTOS + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://aws.amazon.com/freertos + * http://www.FreeRTOS.org + */ + + /** + * @file main.c + * @brief Implements the main function. + */ + + /* FreeRTOS include. */ +#include +#include "task.h" + +/* Standard includes. */ +#include +#include +#include +#include +#include + +/* Test runner includes. */ +#include "test_runner.h" + +/* System application includes. */ +#include "FreeRTOS_IP.h" +#include "FreeRTOS_Sockets.h" +#include "FreeRTOS_DHCP.h" +#include "demo_logging.h" +#include "errhandlingapi.h" +//#include "iot_system_init.h" + +//#include "aws_dev_mode_key_provisioning.h" + +/* Unity includes. */ +#include "unity.h" + +/* Define a name that will be used for LLMNR and NBNS searches. Once running, + * you can "ping RTOSDemo" instead of pinging the IP address, which is useful when + * using DHCP. */ +#define mainHOST_NAME "TestRunner" +#define mainDEVICE_NICK_NAME "windows_TestRunner" + + +#define TEST_RUNNER_TASK_STACK_SIZE 10000 +#define FIRST_EXCEPTION_HANDLER 1 + /* Windows-NT VectoredHandler callback function. */ +static LONG CALLBACK prvExceptionHandler(_In_ PEXCEPTION_POINTERS ExceptionInfo); +jmp_buf xMark; /* Address for long jump to jump to. */ + +/*-----------------------------------------------------------*/ + +/* Notes if the trace is running or not. */ +static BaseType_t xTraceRunning = pdTRUE; + +/* Default MAC address configuration. The demo creates a virtual network + * connection that uses this MAC address by accessing the raw Ethernet data + * to and from a real network connection on the host PC. See the + * configNETWORK_INTERFACE_TO_USE definition for information on how to configure + * the real network connection to use. */ +const uint8_t ucMACAddress[6] = +{ + configMAC_ADDR0, + configMAC_ADDR1, + configMAC_ADDR2, + configMAC_ADDR3, + configMAC_ADDR4, + configMAC_ADDR5 +}; + +/* The default IP and MAC address used by the demo. The address configuration + * defined here will be used if ipconfigUSE_DHCP is 0, or if ipconfigUSE_DHCP is + * 1 but a DHCP server could not be contacted. See the online documentation for + * more information. In both cases the node can be discovered using + * "ping RTOSDemo". */ +static const uint8_t ucIPAddress[4] = +{ + configIP_ADDR0, + configIP_ADDR1, + configIP_ADDR2, + configIP_ADDR3 +}; +static const uint8_t ucNetMask[4] = +{ + configNET_MASK0, + configNET_MASK1, + configNET_MASK2, + configNET_MASK3 +}; +static const uint8_t ucGatewayAddress[4] = +{ + configGATEWAY_ADDR0, + configGATEWAY_ADDR1, + configGATEWAY_ADDR2, + configGATEWAY_ADDR3 +}; +static const uint8_t ucDNSServerAddress[4] = +{ + configDNS_SERVER_ADDR0, + configDNS_SERVER_ADDR1, + configDNS_SERVER_ADDR2, + configDNS_SERVER_ADDR3 +}; + +/* Use by the pseudo random number generator. */ +static UBaseType_t ulNextRand; + +/*-----------------------------------------------------------*/ +int main(void) +{ + /* Register the Windows VEH for exceptions. */ + AddVectoredExceptionHandler(FIRST_EXCEPTION_HANDLER, prvExceptionHandler); + + /* Initialize logging for libraries that depend on it. */ + vLoggingInit( + pdTRUE, + pdFALSE, + pdFALSE, + 0, + 0); + + /* Initialize the network interface. + * + ***NOTE*** Tasks that use the network are created in the network event hook + * when the network is connected and ready for use (see the definition of + * vApplicationIPNetworkEventHook() below). The address values passed in here + * are used if ipconfigUSE_DHCP is set to 0, or if ipconfigUSE_DHCP is set to 1 + * but a DHCP server cannot be contacted. */ + FreeRTOS_printf(("FreeRTOS_IPInit\n")); + FreeRTOS_IPInit( + ucIPAddress, + ucNetMask, + ucGatewayAddress, + ucDNSServerAddress, + ucMACAddress); + + vTaskStartScheduler(); + + return 0; +} +/*-----------------------------------------------------------*/ + +void vApplicationIPNetworkEventHook(eIPCallbackEvent_t eNetworkEvent) +{ + static BaseType_t xTasksAlreadyCreated = pdFALSE; + + /* If the network has just come up...*/ + if ((eNetworkEvent == eNetworkUp) && (xTasksAlreadyCreated == pdFALSE)) + { + xTaskCreate(TEST_RUNNER_RunTests_task, + "TestRunner", + TEST_RUNNER_TASK_STACK_SIZE, + NULL, + tskIDLE_PRIORITY, NULL); + + xTasksAlreadyCreated = pdTRUE; + } +} + +/*-----------------------------------------------------------*/ + +static LONG CALLBACK prvExceptionHandler(_In_ PEXCEPTION_POINTERS ExceptionInfo) +{ + /* Remove warning about unused parameter */ + ( void ) ExceptionInfo; + /* If this function is called during a test, the test immediately fails. */ + TEST_FAIL(); + + return EXCEPTION_CONTINUE_EXECUTION; +} + +/*-----------------------------------------------------------*/ + +#if ( ( ipconfigUSE_LLMNR != 0 ) || \ + ( ipconfigUSE_NBNS != 0 ) || \ + ( ipconfigDHCP_REGISTER_HOSTNAME == 1 ) ) + +const char* pcApplicationHostnameHook(void) +{ + /* This function will be called during the DHCP: the machine will be registered + * with an IP address plus this name. */ + return mainHOST_NAME; +} + +#endif /* if ( ( ipconfigUSE_LLMNR != 0 ) || ( ipconfigUSE_NBNS != 0 ) || ( ipconfigDHCP_REGISTER_HOSTNAME == 1 ) ) */ +/*-----------------------------------------------------------*/ + +#if ( ipconfigUSE_LLMNR != 0 ) || ( ipconfigUSE_NBNS != 0 ) + +BaseType_t xApplicationDNSQueryHook(const char* pcName) +{ + BaseType_t xReturn; + + /* Determine if a name lookup is for this node. Two names are given + * to this node: that returned by pcApplicationHostnameHook() and that set + * by mainDEVICE_NICK_NAME. */ + if (_stricmp(pcName, pcApplicationHostnameHook()) == 0) + { + xReturn = pdPASS; + } + else if (_stricmp(pcName, mainDEVICE_NICK_NAME) == 0) + { + xReturn = pdPASS; + } + else + { + xReturn = pdFAIL; + } + + return xReturn; +} + +#endif /* if ( ipconfigUSE_LLMNR != 0 ) || ( ipconfigUSE_NBNS != 0 ) */ +/*-----------------------------------------------------------*/ + +void vApplicationIdleHook(void) +{ + const uint32_t ulMSToSleep = 1; + const TickType_t xKitHitCheckPeriod = pdMS_TO_TICKS(1000UL); + static TickType_t xTimeNow, xLastTimeCheck = 0; + + /* vApplicationIdleHook() will only be called if configUSE_IDLE_HOOK is set + * to 1 in FreeRTOSConfig.h. It will be called on each iteration of the idle + * task. It is essential that code added to this hook function never attempts + * to block in any way (for example, call xQueueReceive() with a block time + * specified, or call vTaskDelay()). If application tasks make use of the + * vTaskDelete() API function to delete themselves then it is also important + * that vApplicationIdleHook() is permitted to return to its calling function, + * because it is the responsibility of the idle task to clean up memory + * allocated by the kernel to any task that has since deleted itself. */ + + /* _kbhit() is a Windows system function, and system functions can cause + * crashes if they somehow block the FreeRTOS thread. The call to _kbhit() + * can be removed if it causes problems. Limiting the frequency of calls to + * _kbhit() should minimize the potential for issues. */ + xTimeNow = xTaskGetTickCount(); + + if ((xTimeNow - xLastTimeCheck) > xKitHitCheckPeriod) + { + + + /* Uncomment the print line to get confirmation that tests are still + * running if you suspect a previous run resulted in a crash. */ + /* configPRINTF( ( "Running...\n" ) ); /**/ + xLastTimeCheck = xTimeNow; + } + + /* This is just a trivial example of an idle hook. It is called on each + * cycle of the idle task if configUSE_IDLE_HOOK is set to 1 in + * FreeRTOSConfig.h. It must *NOT* attempt to block. In this case the + * idle task just sleeps to lower the CPU usage. */ + Sleep(ulMSToSleep); +} +/*-----------------------------------------------------------*/ + +void vAssertCalled(const char* pcFile, + uint32_t ulLine) +{ + const uint32_t ulLongSleep = 1000UL; + volatile uint32_t ulBlockVariable = 0UL; + volatile char* pcFileName = (volatile char*)pcFile; + volatile uint32_t ulLineNumber = ulLine; + + (void)pcFileName; + (void)ulLineNumber; + + printf("vAssertCalled %s, %ld\n", pcFile, (long)ulLine); + fflush(stdout); + + /* Setting ulBlockVariable to a non-zero value in the debugger will allow + * this function to be exited. */ + taskDISABLE_INTERRUPTS(); + { + while (ulBlockVariable == 0UL) + { + Sleep(ulLongSleep); + } + } + taskENABLE_INTERRUPTS(); +} +/*-----------------------------------------------------------*/ + +void getUserCmd(char* pucUserCmd) +{ + char cTmp; + + scanf("%c%c", pucUserCmd, &cTmp); +} +/*-----------------------------------------------------------*/ + +UBaseType_t uxRand( void ) +{ + const uint32_t ulMultiplier = 0x015a4e35UL, ulIncrement = 1UL; + + /* Utility function to generate a pseudo random number. */ + + ulNextRand = (ulMultiplier * ulNextRand) + ulIncrement; + return((int)(ulNextRand) & 0x7fffUL); +} + +BaseType_t xApplicationGetRandomNumber( uint32_t* pulNumber ) +{ + *pulNumber = uxRand(); + + return pdTRUE; +} + +/* + * Callback that provides the inputs necessary to generate a randomized TCP + * Initial Sequence Number per RFC 6528. THIS IS ONLY A DUMMY IMPLEMENTATION + * THAT RETURNS A PSEUDO RANDOM NUMBER SO IS NOT INTENDED FOR USE IN PRODUCTION + * SYSTEMS. + */ +extern uint32_t ulApplicationGetNextSequenceNumber(uint32_t ulSourceAddress, + uint16_t usSourcePort, + uint32_t ulDestinationAddress, + uint16_t usDestinationPort) +{ + (void)ulSourceAddress; + (void)usSourcePort; + (void)ulDestinationAddress; + (void)usDestinationPort; + + return uxRand(); +} \ No newline at end of file