FreeRTOS-Kernel/FreeRTOS/Demo/Cygnal/ParTest/ParTest.c

/*
 * FreeRTOS Kernel V10.0.1
 * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */
#include <c8051f120.h>

#include "FreeRTOS.h"
#include "task.h"
#include "partest.h"

#define partstPUSH_PULL			( ( unsigned char ) 0xff )
#define partstALL_OUTPUTS_OFF	( ( unsigned char ) 0xff )

/* LED to output is dependent on how the LED's are wired. */
#define partstOUTPUT_0			( ( unsigned char ) 0x02 )
#define partstOUTPUT_1			( ( unsigned char ) 0x08 )
#define partstOUTPUT_2			( ( unsigned char ) 0x20 )
#define partstOUTPUT_3			( ( unsigned char ) 0x01 )
#define partstOUTPUT_4			( ( unsigned char ) 0x04 )
#define partstOUTPUT_5			( ( unsigned char ) 0x10 )
#define partstOUTPUT_6			( ( unsigned char ) 0x40 )
#define partstOUTPUT_7			( ( unsigned char ) 0x80 )

/*-----------------------------------------------------------
 * Simple parallel port IO routines.
 *-----------------------------------------------------------*/

void vParTestInitialise( void )
{
unsigned char ucOriginalSFRPage;

	/* Remember the SFR page before it is changed so it can get set back
	before the function exits. */
	ucOriginalSFRPage = SFRPAGE;

	/* Setup the SFR page to access the config SFR's. */
	SFRPAGE = CONFIG_PAGE;

	/* Set the on board LED to push pull. */
	P3MDOUT |= partstPUSH_PULL;

	/* Return the SFR page. */
	SFRPAGE = ucOriginalSFRPage;

	P3 = partstALL_OUTPUTS_OFF;
}
/*-----------------------------------------------------------*/

void vParTestSetLED( unsigned portBASE_TYPE uxLED, portBASE_TYPE xValue )
{
portBASE_TYPE xError = pdFALSE;

	vTaskSuspendAll();
	{
		if( xValue == pdFALSE )
		{
			switch( uxLED )
			{
				case 0	:	P3 |= partstOUTPUT_0;
							break;
				case 1	:	P3 |= partstOUTPUT_1;
							break;
				case 2	:	P3 |= partstOUTPUT_2;
							break;
				case 3	:	P3 |= partstOUTPUT_3;
							break;
				case 4	:	P3 |= partstOUTPUT_4;
							break;
				case 5	:	P3 |= partstOUTPUT_5;
							break;
				case 6	:	P3 |= partstOUTPUT_6;
							break;
				case 7	:	P3 |= partstOUTPUT_7;
							break;
				default	:	/* There are no other LED's wired in. */
							xError = pdTRUE;
							break;
			}
		}
		else
		{
			switch( uxLED )
			{
				case 0	:	P3 &= ~partstOUTPUT_0;
							break;
				case 1	:	P3 &= ~partstOUTPUT_1;
							break;
				case 2	:	P3 &= ~partstOUTPUT_2;
							break;
				case 3	:	P3 &= ~partstOUTPUT_3;
							break;
				case 4	:	P3 &= ~partstOUTPUT_4;
							break;
				case 5	:	P3 &= ~partstOUTPUT_5;
							break;
				case 6	:	P3 &= ~partstOUTPUT_6;
							break;
				case 7	:	P3 &= ~partstOUTPUT_7;
							break;
				default	:	/* There are no other LED's wired in. */
							break;
			}
		}
	}
	xTaskResumeAll();
}
/*-----------------------------------------------------------*/

void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
{
unsigned char ucBit;
portBASE_TYPE xError = pdFALSE;

	vTaskSuspendAll();
	{
		switch( uxLED )
		{
			case 0	:	ucBit = partstOUTPUT_0;
						break;
			case 1	:	ucBit = partstOUTPUT_1;
						break;
			case 2	:	ucBit = partstOUTPUT_2;
						break;
			case 3	:	ucBit = partstOUTPUT_3;
						break;
			case 4	:	ucBit = partstOUTPUT_4;
						break;
			case 5	:	ucBit = partstOUTPUT_5;
						break;
			case 6	:	ucBit = partstOUTPUT_6;
						break;
			case 7	:	ucBit = partstOUTPUT_7;
						break;
			default	:	/* There are no other LED's wired in. */
						xError = pdTRUE;
						break;
		}

		if( xError != pdTRUE )
		{
			if( P3 & ucBit )
			{
				P3 &= ~ucBit;
			}
			else
			{
				P3 |= ucBit;
			}
		}
	}
	xTaskResumeAll();
}