FreeRTOS-Kernel/portable/CCRH/F1Kx

RH850/F1K and F1Kx FreeRTOS Port with CC-RH Compiler

Introduction

This repository contains the port of FreeRTOS for Renesas RH850/F1K and F1Kx microcontrollers using the CC-RH compiler. The following sections provide instructions on how to use this port, a link to the test project, and other relevant information.

Prerequisites

• Compiler: CC-RH
• FreeRTOS version 11.1.0

Device	FPU	SMP
F1K	Yes	No
F1KM-S1	Yes	No
F1KM-S2	Yes	No
F1KM-S4	Yes	No
F1KH-D8	Yes	Yes

Link to Test Project

The test project can be found here (RH850_F1Kx_CCRH). This project contains example tasks and configurations to help you get started with FreeRTOS on the RH850/F1K and F1Kx.

Note

1. Configure IPIR Interrupt: Ensure that the bit specifying the destination for binding (requesting) an interrupt is enabled (e.g: IBDxxx register of F1KH-D8) (1)
2. Channel 0 and address 0xFFFEEC00 are used as default configuration for configIPIR_CHANNEL and configEXCLUSIVE_ADDRESS, in case of resource confliction other channel/address can be used. (2)
3. The minimal stack size (configMINIMAL_STACK_SIZE) must be included the reserved memory for nested interrupt. This formula can be referred: (task_context_size) * (2 + configMAX_INT_NESTING) + Stack_depth_of_taskcode In which, task_context_size is calculated as 36*4bytes = 144bytes (when FPU enabled) or 34*4bytes = 136 (when FPU disabled), configMAX_INT_NESTING is 02 as default (Note that a value of 0 is not allowed).
4. configTIMER_PRESCALE: This value is required in order to correctly configure clock for CPUCLK_L. Refer to Hardware Manual at Table 44.22 for option byte: If the user sets the option byte CKDIVMD to 1, then configTIMER_PRESCALE = 4. Otherwise, if CKDIVMD is set to 0, then configTIMER_PRESCALE = 2.

(1) This is applicable for F1KH-D8 with SMP only.

(2) This is optional and applicable for SMP only.

Other Relevant Information

• Documentation:

  • Refer to the official FreeRTOS documentation for detailed information on configuring and using FreeRTOS.
  • Consult the RH850 F1K group user manual hardware manual for specific details about the microcontroller.
  • For more information about Renesas RH850/F1K and F1Kx, please visit this website
  • The CC-RH compiler can be downloaded here

• Support:

  • If you encounter any issues or have questions about this port, please open an issue in this repository or contact the maintainer.

• Contributing:

  • Contributions to improve this port are welcome. Please fork the repository, make your changes, and submit a pull request.