16639d2d63
Update to the latest atomic.h.
...
Improve commenting in RISC-V GCC port.
Fix IAR RISC-V port so the first task starts with interrupts enabled.
Add references to third party page ref using newlib with FreeRTOS into the tasks.c file in each place newlib is referenced.
Move the position of the traceTASK_DELETE() trace macro in case of use with a memory allocator that writes over freed memory even when inside a critical section.
Efficiency improvement: Make sure xTaskIncrementTick() does not return pdTRUE when the scheduler is locked. This just prevents an unnecessary yield interrupt (unnecessary as it is ignored) when xYieldPending happens to be pdTRUE.
5 years ago
dbac79045c
Formatting changes only.
5 years ago
fd118f1888
Minor formatting change in comment only.
5 years ago
eb5c60c60b
Update FreeRTOS.h with the version in GitHub. This is also to test submodule.
5 years ago
80c1cb5de1
Correct code comments that referred to taskYIELD_FROM_ISR to portYIELD_FROM_ISR.
...
Update RV32 port to use 16 byte-alignment all the time (only strictly necessary when using FLOP instructions).
5 years ago
c217b68d38
sync from github to svn: this version of atomic.h does not have compiler specific symbols. compiler specific optimization is to be merged in each port/<compiler>/<arch> directory.
5 years ago
7d285f3dcb
+ Moved the History.txt file from the website git repo into the source code SVN repo.
...
+ Added xTaskCatchUpTicks() which corrects the tick count value after the application code has held interrupts disabled for an extended period.
+ Updated the xTaskResumeAll() implementation so it uses the new xTaskCatchUpTicks() function mentioned above to unwind ticks that were pended while the scheduler was suspended.
+ Various maintenance on the message buffer, stream buffer and abort delay demos.
+ Change type of uxPendedTicks from UBaseType_t to TickType_t to ensure it has same type as variables it is compared to, and therefore also rename the variable xPendingTicks.
+ Correct spelling mistake within a comment that was common to all the ARMv7-M ports.
6 years ago
b1e35551c4
Update the FreeRTOS version number in task.h
6 years ago
6bad7d2055
Add the default definition of configPRECONDITION to FreeRTOS.h.
...
This is needed for CBMC proofs.
6 years ago
fa404422b9
Add link to dual core blog post into STM32H745I demo.
...
Doxygen corrections in list.h.
Use #error to check FreeRTOS.h is included before message_buffer.h and stream_buffer.h.
6 years ago
246bb6e806
Add vPortGetHeapStats() function to query heap statistics.
6 years ago
fb3eaeac40
Added additional xMessageBufferSpacesAvailable() (plural) to existing xMessageBufferSpaceAvailable() (singular) macro as the documentation muddled both.
...
Added #define portPOINTER_SIZE_TYPE uint64_t to the 64-bit RISC-V port layer.
6 years ago
b51529a284
Update version number ready for next release.
6 years ago
b9e379951a
Do not strip required symbols when LTO is on
...
Link time optimization was stripping off some symbols which were
accessed from assembly code.
6 years ago
606845492b
Fix potential memory leak in the Win32 FreeRTOS+TCP network interface initialisation sequence.
...
Introduce portMEMORY_BARRIER() macro to assist with memory access ordering when suspending the scheduler if link time optimization is used.
6 years ago
dd9a9710c6
Export port architecture name for COrtex-M33. This can be used by debuggers to find the port in-use to be able to correctly decode the context stored on the stack.
6 years ago
12fb75be37
Fix warning portHAS_STACK_OVERFLOW_CHECKING not defined
...
portHAS_STACK_OVERFLOW_CHECKING was getting defined too late before
being used in portable.h for the platforms that do not have stack
overflow checking registers. This commit ensures that it is defined
before it is used.
6 years ago
5fe8465a35
Change type of usStackDepth to configSTACK_DEPTH_TYPE.
6 years ago
8b6ab5f197
Add instructions on building the Cortex-M33 secure and non secure projects into the comments of that project and into a readme.txt file.
...
Enable configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES setting to be used in statically allocated systems.
6 years ago
ceeff14524
Set default value of configRUN_FREERTOS_SECURE_ONLY to 0.
6 years ago
ce576f3683
First Official Release of ARMV8M Support. This release removes Pre-Release from all the ARMv8M files licensees.
6 years ago
58ba10eee8
Update version number in readiness for V10.2.0 release.
6 years ago
0de2a2758a
Fix definition of tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE
...
tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE was not correctly defined resulting in
dynamically allocated TCB not being freed when MPU was enabled. This commit fixes
the definition to ensure that dynamically allocated RAM (Stack and TCB) is freed
always.
6 years ago
df5952f655
Add xTaskGetIdleRunTimeCounter() API function to return the run time stats counter for the idle task - useful for POSIX time implementations.
6 years ago
11d9c440b8
Move the 'generic' version of freertos_risc_v_chip_specific_extensions.h back to a sub-directory as having it in the RISC-V port's base directory was causing SoftConsole to pick up the wrong version (for an unknown reason).
...
Add a project for the Vega board's RI5CY core.
6 years ago
148f588f56
Remove "FromISR' functions from the list of functions that switch to a privileged mode as IRQs are privileged already.
...
Add the vTimerSetReloadMode() API function.
6 years ago
dc99300fa9
First task running in RISC-V-Qemu-sifive_e-FreedomStudio demo.
6 years ago
55ff89373a
Update the method used to detect if a timer is active. Previously the timer was deemed to be inactive if it was not referenced from a list. However, when a timer is updated it is temporarily removed from, then re-added to a list, so now the timer's active status is stored separately.
6 years ago
6fab2b9e0d
Add xTaskGetApplicationTaskTagFromISR(), which is an interrupt safe version of xTaskGetApplicationTaskTagFrom().
6 years ago
c6de0001fa
Added uxTaskGetStackHighWaterMark2(), which is the same as uxTaskGetStackHighWaterMark() other than the return type.
...
Allows the task name parameter passed into xTaskCreate() to be NULL.
6 years ago
0c0f0d0f8f
Minor synching - no functional changes.
7 years ago
92ae8e7aff
Update version numbers ready for release.
7 years ago
be9c0730c3
Update trace recorder code to the latest.
...
Some minor changes to enable the configREMOVE_STATIC_QUALIFIER constant to be used by those debuggers that cannot cope with statics being used.
7 years ago
21a8ff35dd
Two minor updates in the comments to fix html formatting that was preventing doxygen creating documents correctly.
7 years ago
0d6e3df7ec
Minor updates to fix issues with the Segger kernel aware plug since V10.1.0.
7 years ago
893db45834
Changes required for the IAR StateViewer plug-in to work with FreeRTOS V10.1.0.
7 years ago
3a1631fda3
Update copyright date ready for tagging V10.1.0.
7 years ago
fb9de58f56
Update version numbers in preparation for a new release.
7 years ago
722ca8fb2b
Update demo project for Tensilita - work in progres..
...
Add support for POSIX style errno - work in progress.
7 years ago
d6fcd5dbba
Add the option to specify a stack size in the standard demo MessageBuffer tests.
...
Add stream and message buffer tests into the Zynq demo project.
7 years ago
4fbcdbf13b
Fix misra violations in queue.c by introducing a union that allows the correct data types to be used in place of void *, then tidy up where the union is used.
7 years ago
4a8c4c9eaf
TimerHandle_t is now type safe instead of void *.
...
Remove casts that are no longer required not type safe handles are used.
7 years ago
3d8681de9e
Continue updating to MISRA 2012 from 2004 - currently working on queue.c and committing as working copy prior to making larger change.
...
Change QueueHandle_t to be typesafe from void *.
Change StreamBuffer_t to be typesafe from void *.
7 years ago
7a9f453f96
Remove casts from EventGroupHandle_t to EventGroup_t, and corresponding lint comments, which are not required now EventGroupHandle_t is type safe.
...
Fix the prototype of prvTimerCallback() in the MPU simulator demo (caught due to the new type safety in tasks.c).
7 years ago
390fb06b49
First pass at updating from MISRA 2004 to MISRA 2012:
...
Updated pvContainer member of list items to List_t * rather than void * as they are always contained in a list if anywhere.
Made EventGroupHandle_t typesafe pointer to forward referenced struct rather than void pointer.
Made TaskHandle_t typesafe pointer to forward referenced struct, rather than a void pointer.
7 years ago
585b16a39f
Update definition of StaticTimer_t so its size is correct on MSP403X large memory model builds.
7 years ago
3ec86b7a98
Introduce sbBYTES_TO_STORE_MESSAGE_LENGTH to allow the number of bytes used to hold a message length in a message buffer to be reduced if 4 bytes is always too many (save a little RAM).
7 years ago
f9bef06ec0
Introduce xMessageBufferNextLengthBytes() and tests for the same.
...
Add call to traceTASK_SWITCHED_IN() in vTaskStartScheduler() so trace tools can see the first task to run.
7 years ago
208cc18a90
Ensure data cannot be sent to a TCP socket if the socket is in the process of closing.
...
Correct definition of StaticTask_t in the case that portUSE_MPU_WRAPPERS is set to 1.
prvTaskCheckFreeStackSpace() now returns configSTACK_DEPTH_TYPE to allow return values greater than max uint16_t value if required.
xStreamBufferSend() and xStreamBufferReceive() no longer clear task notification bits - clearing was unnecessary as only the task notification state is used.
7 years ago
0fe82b4d91
Correct out of date comment in tasks.c.
...
Fix typo in comment in queue.h.
7 years ago
Richard Barry
Yuhui.Zheng
Gaurav Aggarwal