Change interface between the MAC and uIP task in the RX62N/RDK/Renesas demo to use a queue in place of the binary semaphore. This is so the queue can be used to indicate the type of event that has occurred.

Demo/RX600_RX62N-RDK_Renesas/RTOSDemo/webserver/EMAC.c

@@ -246,23 +246,29 @@ unsigned long ulBytesReceived;
 
 	if( ulBytesReceived > 0 )
 	{
-		pxCurrentRxDesc->status &= ~( FP1 | FP0 );
-		pxCurrentRxDesc->status |= ACT;			
-
-		if( EDMAC.EDRRR.LONG == 0x00000000L )
-		{
-			/* Restart Ethernet if it has stopped */
-			EDMAC.EDRRR.LONG = 0x00000001L;
-		}
-
 		/* Mark the pxDescriptor buffer as free as uip_buf is going to be set to
 		the buffer that contains the received data. */
 		prvReturnBuffer( uip_buf );
-		
+
+		/* Point uip_buf to the data about ot be processed. */
 		uip_buf = ( void * ) pxCurrentRxDesc->buf_p;
+		
+		/* Allocate a new buffer to the descriptor, as uip_buf is now using it's
+		old descriptor. */
+		pxCurrentRxDesc->buf_p = prvGetNextBuffer();
+
+		/* Prepare the descriptor to go again. */
+		pxCurrentRxDesc->status &= ~( FP1 | FP0 );
+		pxCurrentRxDesc->status |= ACT;
 
 		/* Move onto the next buffer in the ring. */
 		pxCurrentRxDesc = pxCurrentRxDesc->next;
+		
+		if( EDMAC.EDRRR.LONG == 0x00000000L )
+		{
+			/* Restart Ethernet if it has stopped */
+			EDMAC.EDRRR.LONG = 0x00000001L;
+		}
 	}
 
 	return ulBytesReceived;
@@ -504,7 +510,6 @@ static void prvConfigureEtherCAndEDMAC( void )
 	/* Set the EDMAC interrupt priority. */
 	_IPR( _ETHER_EINT ) = configKERNEL_INTERRUPT_PRIORITY;
 
-	/* TODO:    Check   bit 5   */
 	/* Enable interrupts of interest only. */
 	EDMAC.EESIPR.LONG = emacTX_END_INTERRUPT | emacRX_END_INTERRUPT;
 	ETHERC.RFLR.LONG = 1518;					/* Ether payload is 1500+ CRC */
@@ -521,7 +526,8 @@ static void prvConfigureEtherCAndEDMAC( void )
 	EDMAC.TFTR.LONG = 0x00000000;				/* Threshold of Tx_FIFO */
 	EDMAC.FDR.LONG = 0x00000000;				/* Transmit fifo & receive fifo is 256 bytes */
 	EDMAC.RMCR.LONG = 0x00000003;				/* Receive function is normal mode(continued) */
-	
+	ETHERC.ECMR.BIT.PRM = 0;					/* Ensure promiscuous mode is off. */
+		
 	/* Enable the interrupt... */
 	_IEN( _ETHER_EINT ) = 1;	
 }
@@ -532,19 +538,14 @@ void vEMAC_ISR_Handler( void )
 {
 unsigned long ul = EDMAC.EESR.LONG;
 long lHigherPriorityTaskWoken = pdFALSE;
-extern xSemaphoreHandle xEMACSemaphore;
-static long ulTxEndInts = 0;
+extern xQueueHandle xEMACEventQueue;
+const unsigned long ulRxEvent = uipETHERNET_RX_EVENT;
 
 	/* Has a Tx end occurred? */
 	if( ul & emacTX_END_INTERRUPT )
 	{
-		++ulTxEndInts;
-		if( ulTxEndInts >= 2 )
-		{
-			/* Only return the buffer to the pool once both Txes have completed. */
-			prvReturnBuffer( ( void * ) xTxDescriptors[ 0 ].buf_p );
-			ulTxEndInts = 0;
-		}
+		/* Only return the buffer to the pool once both Txes have completed. */
+		prvReturnBuffer( ( void * ) xTxDescriptors[ 0 ].buf_p );
 		EDMAC.EESR.LONG = emacTX_END_INTERRUPT;
 	}
 
@@ -552,7 +553,7 @@ static long ulTxEndInts = 0;
 	if( ul & emacRX_END_INTERRUPT )
 	{
 		/* Make sure the Ethernet task is not blocked waiting for a packet. */
-		xSemaphoreGiveFromISR( xEMACSemaphore, &lHigherPriorityTaskWoken );
+		xQueueSendFromISR( xEMACEventQueue, &ulRxEvent, &lHigherPriorityTaskWoken );
 		portYIELD_FROM_ISR( lHigherPriorityTaskWoken );
 		EDMAC.EESR.LONG = emacRX_END_INTERRUPT;
 	}