Update the FreeRTOS_Plus_CLI_with_Trace_Windows_Simulator demo to use the latest FreeRTOS+Trace recorder code.
Richard Barry
8 years ago
parent
35f5990e7a
commit
504d9c8bab
@ -0,0 +1,472 @@
|
||||
/*******************************************************************************
|
||||
* Trace Recorder Library for Tracealyzer v3.1.2
|
||||
* Percepio AB, www.percepio.com
|
||||
*
|
||||
* trcSnapshotConfig.h
|
||||
*
|
||||
* Configuration parameters for trace recorder library in snapshot mode.
|
||||
* Read more at http://percepio.com/2016/10/05/rtos-tracing/
|
||||
*
|
||||
* Terms of Use
|
||||
* This file is part of the trace recorder library (RECORDER), which is the
|
||||
* intellectual property of Percepio AB (PERCEPIO) and provided under a
|
||||
* license as follows.
|
||||
* The RECORDER may be used free of charge for the purpose of recording data
|
||||
* intended for analysis in PERCEPIO products. It may not be used or modified
|
||||
* for other purposes without explicit permission from PERCEPIO.
|
||||
* You may distribute the RECORDER in its original source code form, assuming
|
||||
* this text (terms of use, disclaimer, copyright notice) is unchanged. You are
|
||||
* allowed to distribute the RECORDER with minor modifications intended for
|
||||
* configuration or porting of the RECORDER, e.g., to allow using it on a
|
||||
* specific processor, processor family or with a specific communication
|
||||
* interface. Any such modifications should be documented directly below
|
||||
* this comment block.
|
||||
*
|
||||
* Disclaimer
|
||||
* The RECORDER is being delivered to you AS IS and PERCEPIO makes no warranty
|
||||
* as to its use or performance. PERCEPIO does not and cannot warrant the
|
||||
* performance or results you may obtain by using the RECORDER or documentation.
|
||||
* PERCEPIO make no warranties, express or implied, as to noninfringement of
|
||||
* third party rights, merchantability, or fitness for any particular purpose.
|
||||
* In no event will PERCEPIO, its technology partners, or distributors be liable
|
||||
* to you for any consequential, incidental or special damages, including any
|
||||
* lost profits or lost savings, even if a representative of PERCEPIO has been
|
||||
* advised of the possibility of such damages, or for any claim by any third
|
||||
* party. Some jurisdictions do not allow the exclusion or limitation of
|
||||
* incidental, consequential or special damages, or the exclusion of implied
|
||||
* warranties or limitations on how long an implied warranty may last, so the
|
||||
* above limitations may not apply to you.
|
||||
*
|
||||
* Tabs are used for indent in this file (1 tab = 4 spaces)
|
||||
*
|
||||
* Copyright Percepio AB, 2017.
|
||||
* www.percepio.com
|
||||
******************************************************************************/
|
||||
|
||||
#ifndef TRC_SNAPSHOT_CONFIG_H
|
||||
#define TRC_SNAPSHOT_CONFIG_H
|
||||
|
||||
#define TRC_SNAPSHOT_MODE_RING_BUFFER (0x01)
|
||||
#define TRC_SNAPSHOT_MODE_STOP_WHEN_FULL (0x02)
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_SNAPSHOT_MODE
|
||||
*
|
||||
* Macro which should be defined as one of:
|
||||
* - TRC_SNAPSHOT_MODE_RING_BUFFER
|
||||
* - TRC_SNAPSHOT_MODE_STOP_WHEN_FULL
|
||||
* Default is TRC_SNAPSHOT_MODE_RING_BUFFER.
|
||||
*
|
||||
* With TRC_CFG_SNAPSHOT_MODE set to TRC_SNAPSHOT_MODE_RING_BUFFER, the
|
||||
* events are stored in a ring buffer, i.e., where the oldest events are
|
||||
* overwritten when the buffer becomes full. This allows you to get the last
|
||||
* events leading up to an interesting state, e.g., an error, without having
|
||||
* to store the whole run since startup.
|
||||
*
|
||||
* When TRC_CFG_SNAPSHOT_MODE is TRC_SNAPSHOT_MODE_STOP_WHEN_FULL, the
|
||||
* recording is stopped when the buffer becomes full. This is useful for
|
||||
* recording events following a specific state, e.g., the startup sequence.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_SNAPSHOT_MODE TRC_SNAPSHOT_MODE_RING_BUFFER
|
||||
|
||||
/*******************************************************************************
|
||||
* TRC_CFG_SCHEDULING_ONLY
|
||||
*
|
||||
* Macro which should be defined as an integer value.
|
||||
*
|
||||
* If this setting is enabled (= 1), only scheduling events are recorded.
|
||||
* If disabled (= 0), all events are recorded.
|
||||
*
|
||||
* For users of Tracealyzer Free Edition, that only displays scheduling events, this
|
||||
* option can be used to avoid storing other events.
|
||||
*
|
||||
* Default value is 0 (store all enabled events).
|
||||
*
|
||||
******************************************************************************/
|
||||
#define TRC_CFG_SCHEDULING_ONLY 0
|
||||
|
||||
/*******************************************************************************
|
||||
* TRC_CFG_EVENT_BUFFER_SIZE
|
||||
*
|
||||
* Macro which should be defined as an integer value.
|
||||
*
|
||||
* This defines the capacity of the event buffer, i.e., the number of records
|
||||
* it may store. Most events use one record (4 byte), although some events
|
||||
* require multiple 4-byte records. You should adjust this to the amount of RAM
|
||||
* available in the target system.
|
||||
*
|
||||
* Default value is 1000, which means that 4000 bytes is allocated for the
|
||||
* event buffer.
|
||||
******************************************************************************/
|
||||
#define TRC_CFG_EVENT_BUFFER_SIZE 15000
|
||||
|
||||
/*******************************************************************************
|
||||
* TRC_CFG_NTASK, TRC_CFG_NISR, TRC_CFG_NQUEUE, TRC_CFG_NSEMAPHORE...
|
||||
*
|
||||
* A group of macros which should be defined as integer values, zero or larger.
|
||||
*
|
||||
* These define the capacity of the Object Property Table, i.e., the maximum
|
||||
* number of objects active at any given point, within each object class (e.g.,
|
||||
* task, queue, semaphore, ...).
|
||||
*
|
||||
* If tasks or other objects are deleted in your system, this
|
||||
* setting does not limit the total amount of objects created, only the number
|
||||
* of objects that have been successfully created but not yet deleted.
|
||||
*
|
||||
* Using too small values will cause vTraceError to be called, which stores an
|
||||
* error message in the trace that is shown when opening the trace file. The
|
||||
* error message can also be retrieved using xTraceGetLastError.
|
||||
*
|
||||
* It can be wise to start with large values for these constants,
|
||||
* unless you are very confident on these numbers. Then do a recording and
|
||||
* check the actual usage by selecting View menu -> Trace Details ->
|
||||
* Resource Usage -> Object Table.
|
||||
******************************************************************************/
|
||||
#define TRC_CFG_NTASK 150
|
||||
#define TRC_CFG_NISR 90
|
||||
#define TRC_CFG_NQUEUE 90
|
||||
#define TRC_CFG_NSEMAPHORE 90
|
||||
#define TRC_CFG_NMUTEX 90
|
||||
#define TRC_CFG_NTIMER 250
|
||||
#define TRC_CFG_NEVENTGROUP 90
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_INCLUDE_MEMMANG_EVENTS
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
*
|
||||
* This controls if malloc and free calls should be traced. Set this to zero (0)
|
||||
* to exclude malloc/free calls, or one (1) to include such events in the trace.
|
||||
*
|
||||
* Default value is 1.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_INCLUDE_MEMMANG_EVENTS 1
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_INCLUDE_USER_EVENTS
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
*
|
||||
* If this is zero (0) the code for creating User Events is excluded to
|
||||
* reduce code size. User Events are application-generated events, like
|
||||
* "printf" but for the trace log and the formatting is done offline, by the
|
||||
* Tracealyzer visualization tool. User Events are much faster than a printf
|
||||
* and can therefore be used in timing critical code.
|
||||
*
|
||||
* Default value is 1.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_INCLUDE_USER_EVENTS 1
|
||||
|
||||
/*****************************************************************************
|
||||
* TRC_CFG_INCLUDE_ISR_TRACING
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
*
|
||||
* If this is zero (0), the code for recording Interrupt Service Routines is
|
||||
* excluded, in order to reduce code size.
|
||||
*
|
||||
* Default value is 1.
|
||||
*
|
||||
* Note: tracing ISRs requires that you insert calls to vTraceStoreISRBegin
|
||||
* and vTraceStoreISREnd in your interrupt handlers.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_INCLUDE_ISR_TRACING 1
|
||||
|
||||
/*****************************************************************************
|
||||
* TRC_CFG_INCLUDE_READY_EVENTS
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
*
|
||||
* If one (1), events are recorded when tasks enter scheduling state "ready".
|
||||
* This allows Tracealyzer to show the initial pending time before tasks enter
|
||||
* the execution state, and present accurate response times.
|
||||
* If zero (0), "ready events" are not created, which allows for recording
|
||||
* longer traces in the same amount of RAM.
|
||||
*
|
||||
* Default value is 1.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_INCLUDE_READY_EVENTS 1
|
||||
|
||||
/*****************************************************************************
|
||||
* TRC_CFG_INCLUDE_OSTICK_EVENTS
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
*
|
||||
* If this is one (1), events will be generated whenever the OS clock is
|
||||
* increased. If zero (0), OS tick events are not generated, which allows for
|
||||
* recording longer traces in the same amount of RAM.
|
||||
*
|
||||
* Default value is 0.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_INCLUDE_OSTICK_EVENTS 1
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_INCLUDE_FLOAT_SUPPORT
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
*
|
||||
* If this is zero (0), the support for logging floating point values in
|
||||
* vTracePrintF is stripped out, in case floating point values are not used or
|
||||
* supported by the platform used.
|
||||
*
|
||||
* Floating point values are only used in vTracePrintF and its subroutines, to
|
||||
* allow for storing float (%f) or double (%lf) arguments.
|
||||
*
|
||||
* vTracePrintF can be used with integer and string arguments in either case.
|
||||
*
|
||||
* Default value is 0.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_INCLUDE_FLOAT_SUPPORT 0
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_INCLUDE_OBJECT_DELETE
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
*
|
||||
* This must be enabled (1) if tasks, queues or other
|
||||
* traced kernel objects are deleted at runtime. If no deletes are made, this
|
||||
* can be set to 0 in order to exclude the delete-handling code.
|
||||
*
|
||||
* Default value is 1.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_INCLUDE_OBJECT_DELETE 1
|
||||
|
||||
/*******************************************************************************
|
||||
* TRC_CFG_SYMBOL_TABLE_SIZE
|
||||
*
|
||||
* Macro which should be defined as an integer value.
|
||||
*
|
||||
* This defines the capacity of the symbol table, in bytes. This symbol table
|
||||
* stores User Events labels and names of deleted tasks, queues, or other kernel
|
||||
* objects. If you don't use User Events or delete any kernel
|
||||
* objects you set this to a very low value. The minimum recommended value is 4.
|
||||
* A size of zero (0) is not allowed since a zero-sized array may result in a
|
||||
* 32-bit pointer, i.e., using 4 bytes rather than 0.
|
||||
*
|
||||
* Default value is 800.
|
||||
******************************************************************************/
|
||||
#define TRC_CFG_SYMBOL_TABLE_SIZE 5000
|
||||
|
||||
#if (TRC_CFG_SYMBOL_TABLE_SIZE == 0)
|
||||
#error "TRC_CFG_SYMBOL_TABLE_SIZE may not be zero!"
|
||||
#endif
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_NAME_LEN_TASK, TRC_CFG_NAME_LEN_QUEUE, ...
|
||||
*
|
||||
* Macros that specify the maximum lengths (number of characters) for names of
|
||||
* kernel objects, such as tasks and queues. If longer names are used, they will
|
||||
* be truncated when stored in the recorder.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_NAME_LEN_TASK 15
|
||||
#define TRC_CFG_NAME_LEN_ISR 15
|
||||
#define TRC_CFG_NAME_LEN_QUEUE 15
|
||||
#define TRC_CFG_NAME_LEN_SEMAPHORE 15
|
||||
#define TRC_CFG_NAME_LEN_MUTEX 15
|
||||
#define TRC_CFG_NAME_LEN_TIMER 15
|
||||
#define TRC_CFG_NAME_LEN_EVENTGROUP 15
|
||||
|
||||
/******************************************************************************
|
||||
*** ADVANCED SETTINGS ********************************************************
|
||||
******************************************************************************
|
||||
* The remaining settings are not necessary to modify but allows for optimizing
|
||||
* the recorder setup for your specific needs, e.g., to exclude events that you
|
||||
* are not interested in, in order to get longer traces.
|
||||
*****************************************************************************/
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_HEAP_SIZE_BELOW_16M
|
||||
*
|
||||
* An integer constant that can be used to reduce the buffer usage of memory
|
||||
* allocation events (malloc/free). This value should be 1 if the heap size is
|
||||
* below 16 MB (2^24 byte), and you can live with reported addresses showing the
|
||||
* lower 24 bits only. If 0, you get the full 32-bit addresses.
|
||||
*
|
||||
* Default value is 0.
|
||||
******************************************************************************/
|
||||
#define TRC_CFG_HEAP_SIZE_BELOW_16M 0
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_USE_IMPLICIT_IFE_RULES
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
* Default is 1.
|
||||
*
|
||||
* Tracealyzer groups the events into "instances" based on Instance Finish
|
||||
* Events (IFEs), produced either by default rules or calls to the recorder
|
||||
* functions vTraceInstanceFinishedNow and vTraceInstanceFinishedNext.
|
||||
*
|
||||
* If TRC_CFG_USE_IMPLICIT_IFE_RULES is one (1), the default IFE rules is
|
||||
* used, resulting in a "typical" grouping of events into instances.
|
||||
* If these rules don't give appropriate instances in your case, you can
|
||||
* override the default rules using vTraceInstanceFinishedNow/Next for one
|
||||
* or several tasks. The default IFE rules are then disabled for those tasks.
|
||||
*
|
||||
* If TRC_CFG_USE_IMPLICIT_IFE_RULES is zero (0), the implicit IFE rules are
|
||||
* disabled globally. You must then call vTraceInstanceFinishedNow or
|
||||
* vTraceInstanceFinishedNext to manually group the events into instances,
|
||||
* otherwise the tasks will appear a single long instance.
|
||||
*
|
||||
* The default IFE rules count the following events as "instance finished":
|
||||
* - Task delay, delay until
|
||||
* - Task suspend
|
||||
* - Blocking on "input" operations, i.e., when the task is waiting for the
|
||||
* next a message/signal/event. But only if this event is blocking.
|
||||
*
|
||||
* For details, see trcSnapshotKernelPort.h and look for references to the
|
||||
* macro trcKERNEL_HOOKS_SET_TASK_INSTANCE_FINISHED.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_USE_IMPLICIT_IFE_RULES 1
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_USE_16BIT_OBJECT_HANDLES
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
*
|
||||
* If set to 0 (zero), the recorder uses 8-bit handles to identify kernel
|
||||
* objects such as tasks and queues. This limits the supported number of
|
||||
* concurrently active objects to 255 of each type (tasks, queues, mutexes,
|
||||
* etc.) Note: 255, not 256, since handle 0 is reserved.
|
||||
*
|
||||
* If set to 1 (one), the recorder uses 16-bit handles to identify kernel
|
||||
* objects such as tasks and queues. This limits the supported number of
|
||||
* concurrent objects to 65535 of each type (object class). However, since the
|
||||
* object property table is limited to 64 KB, the practical limit is about
|
||||
* 3000 objects in total.
|
||||
*
|
||||
* Default is 0 (8-bit handles)
|
||||
*
|
||||
* NOTE: An object with handle above 255 will use an extra 4-byte record in
|
||||
* the event buffer whenever the object is referenced. Moreover, some internal
|
||||
* tables in the recorder gets slightly larger when using 16-bit handles.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_USE_16BIT_OBJECT_HANDLES 0
|
||||
|
||||
/******************************************************************************
|
||||
* TRC_CFG_USE_TRACE_ASSERT
|
||||
*
|
||||
* Macro which should be defined as either zero (0) or one (1).
|
||||
* Default is 1.
|
||||
*
|
||||
* If this is one (1), the TRACE_ASSERT macro (used at various locations in the
|
||||
* trace recorder) will verify that a relevant condition is true.
|
||||
* If the condition is false, prvTraceError() will be called, which stops the
|
||||
* recording and stores an error message that is displayed when opening the
|
||||
* trace in Tracealyzer.
|
||||
*
|
||||
* This is used on several places in the recorder code for sanity checks on
|
||||
* parameters. Can be switched off to reduce the footprint of the tracing, but
|
||||
* we recommend to have it enabled initially.
|
||||
*****************************************************************************/
|
||||
#define TRC_CFG_USE_TRACE_ASSERT 1
|
||||
|
||||
/*******************************************************************************
|
||||
* TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER
|
||||
*
|
||||
* Macro which should be defined as an integer value.
|
||||
*
|
||||
* Set TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER to 1 to enable the
|
||||
* separate user event buffer (UB).
|
||||
* In this mode, user events are stored separately from other events,
|
||||
* e.g., RTOS events. Thereby you can get a much longer history of
|
||||
* user events as they don't need to share the buffer space with more
|
||||
* frequent events.
|
||||
*
|
||||
* The UB is typically used with the snapshot ring-buffer mode, so the
|
||||
* recording can continue when the main buffer gets full. And since the
|
||||
* main buffer then overwrites the earliest events, Tracealyzer displays
|
||||
* "Unknown Actor" instead of task scheduling for periods with UB data only.
|
||||
*
|
||||
* In UB mode, user events are structured as UB channels, which contains
|
||||
* a channel name and a default format string. Register a UB channel using
|
||||
* xTraceRegisterUBChannel.
|
||||
*
|
||||
* Events and data arguments are written using vTraceUBEvent and
|
||||
* vTraceUBData. They are designed to provide efficient logging of
|
||||
* repeating events, using the same format string within each channel.
|
||||
*
|
||||
* Examples:
|
||||
*
|
||||
* traceString chn1 = xTraceRegisterString("Channel 1");
|
||||
* traceString fmt1 = xTraceRegisterString("Event!");
|
||||
* traceUBChannel UBCh1 = xTraceRegisterUBChannel(chn1, fmt1);
|
||||
*
|
||||
* traceString chn2 = xTraceRegisterString("Channel 2");
|
||||
* traceString fmt2 = xTraceRegisterString("X: %d, Y: %d");
|
||||
* traceUBChannel UBCh2 = xTraceRegisterUBChannel(chn2, fmt2);
|
||||
*
|
||||
* // Result in "[Channel 1] Event!"
|
||||
* vTraceUBEvent(UBCh1);
|
||||
*
|
||||
* // Result in "[Channel 2] X: 23, Y: 19"
|
||||
* vTraceUBData(UBCh2, 23, 19);
|
||||
*
|
||||
* You can also use the other user event functions, like vTracePrintF.
|
||||
* as they are then rerouted to the UB instead of the main event buffer.
|
||||
* vTracePrintF then looks up the correct UB channel based on the
|
||||
* provided channel name and format string, or creates a new UB channel
|
||||
* if no match is found. The format string should therefore not contain
|
||||
* "random" messages but mainly format specifiers. Random strings should
|
||||
* be stored using %s and with the string as an argument.
|
||||
*
|
||||
* // Creates a new UB channel ("Channel 2", "%Z: %d")
|
||||
* vTracePrintF(chn2, "%Z: %d", value1);
|
||||
*
|
||||
* // Finds the existing UB channel
|
||||
* vTracePrintF(chn2, "%Z: %d", value2);
|
||||
|
||||
******************************************************************************/
|
||||
#define TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER 0
|
||||
|
||||
/*******************************************************************************
|
||||
* TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE
|
||||
*
|
||||
* Macro which should be defined as an integer value.
|
||||
*
|
||||
* This defines the capacity of the user event buffer (UB), in number of slots.
|
||||
* A single user event can use multiple slots, depending on the arguments.
|
||||
*
|
||||
* Only applicable if TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER is 1.
|
||||
******************************************************************************/
|
||||
#define TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE 200
|
||||
|
||||
/*******************************************************************************
|
||||
* TRC_CFG_UB_CHANNELS
|
||||
*
|
||||
* Macro which should be defined as an integer value.
|
||||
*
|
||||
* This defines the number of User Event Buffer Channels (UB channels).
|
||||
* These are used to structure the events when using the separate user
|
||||
* event buffer, and contains both a User Event Channel (the name) and
|
||||
* a default format string for the channel.
|
||||
*
|
||||
* Only applicable if TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER is 1.
|
||||
******************************************************************************/
|
||||
#define TRC_CFG_UB_CHANNELS 32
|
||||
|
||||
/*******************************************************************************
|
||||
* TRC_CFG_ISR_TAILCHAINING_THRESHOLD
|
||||
*
|
||||
* Macro which should be defined as an integer value.
|
||||
*
|
||||
* If tracing multiple ISRs, this setting allows for accurate display of the
|
||||
* context-switching also in cases when the ISRs execute in direct sequence.
|
||||
*
|
||||
* vTraceStoreISREnd normally assumes that the ISR returns to the previous
|
||||
* context, i.e., a task or a preempted ISR. But if another traced ISR
|
||||
* executes in direct sequence, Tracealyzer may incorrectly display a minimal
|
||||
* fragment of the previous context in between the ISRs.
|
||||
*
|
||||
* By using TRC_CFG_ISR_TAILCHAINING_THRESHOLD you can avoid this. This is
|
||||
* however a threshold value that must be measured for your specific setup.
|
||||
* See http://percepio.com/2014/03/21/isr_tailchaining_threshold/
|
||||
*
|
||||
* The default setting is 0, meaning "disabled" and that you may get an
|
||||
* extra fragments of the previous context in between tail-chained ISRs.
|
||||
*
|
||||
* Note: This setting has separate definitions in trcSnapshotConfig.h and
|
||||
* trcStreamingConfig.h, since it is affected by the recorder mode.
|
||||
******************************************************************************/
|
||||
#define TRC_CFG_ISR_TAILCHAINING_THRESHOLD 0
|
||||
|
||||
#endif /*TRC_SNAPSHOT_CONFIG_H*/
|
||||
Loading…
Reference in New Issue