<EDKSYSTEM EDKVERSION= "11.2" EDWVERSION= "1.1" TIMESTAMP= "Tue Jun 30 20:53:27 2009" >
<SYSTEMINFO ARCH= "virtex5" DEVICE= "5vfx70t" PACKAGE= "ff1136" PART= "5vfx70tff1136-1" SOURCE= "C:/E/Dev/FreeRTOS/WorkingCopy3/Demo/PPC440_Xilinx_Virtex5_GCC/" SPEEDGRADE= "-1" />
<EXTERNALPORTS >
<PORT DIR= "I" MHS_INDEX= "0" NAME= "fpga_0_RS232_Uart_1_RX_pin" SIGNAME= "fpga_0_RS232_Uart_1_RX_pin" />
<PORT DIR= "O" MHS_INDEX= "1" NAME= "fpga_0_RS232_Uart_1_TX_pin" SIGNAME= "fpga_0_RS232_Uart_1_TX_pin" />
<PORT DIR= "IO" ENDIAN= "LITTLE" LSB= "0" MHS_INDEX= "2" MSB= "7" NAME= "fpga_0_LEDs_8Bit_GPIO_IO_pin" SIGNAME= "fpga_0_LEDs_8Bit_GPIO_IO_pin" />
<PORT DIR= "IO" ENDIAN= "LITTLE" LSB= "0" MHS_INDEX= "3" MSB= "4" NAME= "fpga_0_LEDs_Positions_GPIO_IO_pin" SIGNAME= "fpga_0_LEDs_Positions_GPIO_IO_pin" />
<PORT DIR= "IO" ENDIAN= "LITTLE" LSB= "0" MHS_INDEX= "4" MSB= "4" NAME= "fpga_0_Push_Buttons_5Bit_GPIO_IO_pin" SIGNAME= "fpga_0_Push_Buttons_5Bit_GPIO_IO_pin" />
<PORT DIR= "IO" ENDIAN= "LITTLE" LSB= "0" MHS_INDEX= "5" MSB= "7" NAME= "fpga_0_DIP_Switches_8Bit_GPIO_IO_pin" SIGNAME= "fpga_0_DIP_Switches_8Bit_GPIO_IO_pin" />
<PORT DIR= "IO" MHS_INDEX= "6" NAME= "fpga_0_IIC_EEPROM_Sda_pin" SIGNAME= "fpga_0_IIC_EEPROM_Sda_pin" />
<PORT DIR= "IO" MHS_INDEX= "7" NAME= "fpga_0_IIC_EEPROM_Scl_pin" SIGNAME= "fpga_0_IIC_EEPROM_Scl_pin" />
<PORT DIR= "O" ENDIAN= "LITTLE" LSB= "7" MHS_INDEX= "8" MSB= "30" NAME= "fpga_0_SRAM_Mem_A_pin" SIGNAME= "fpga_0_SRAM_Mem_A_pin_vslice_7_30_concat" />
<PORT DIR= "O" MHS_INDEX= "9" NAME= "fpga_0_SRAM_Mem_CEN_pin" SIGNAME= "fpga_0_SRAM_Mem_CEN_pin" />
<PORT DIR= "O" MHS_INDEX= "10" NAME= "fpga_0_SRAM_Mem_OEN_pin" SIGNAME= "fpga_0_SRAM_Mem_OEN_pin" />
<PORT DIR= "O" MHS_INDEX= "11" NAME= "fpga_0_SRAM_Mem_WEN_pin" SIGNAME= "fpga_0_SRAM_Mem_WEN_pin" />
<PORT DIR= "O" ENDIAN= "LITTLE" LSB= "0" MHS_INDEX= "12" MSB= "3" NAME= "fpga_0_SRAM_Mem_BEN_pin" SIGNAME= "fpga_0_SRAM_Mem_BEN_pin" />
<PORT DIR= "O" MHS_INDEX= "13" NAME= "fpga_0_SRAM_Mem_ADV_LDN_pin" SIGNAME= "fpga_0_SRAM_Mem_ADV_LDN_pin" />
<PORT DIR= "IO" ENDIAN= "LITTLE" LSB= "0" MHS_INDEX= "14" MSB= "31" NAME= "fpga_0_SRAM_Mem_DQ_pin" SIGNAME= "fpga_0_SRAM_Mem_DQ_pin" />
<PORT DIR= "O" MHS_INDEX= "15" NAME= "fpga_0_SRAM_ZBT_CLK_OUT_pin" SIGIS= "CLK" SIGNAME= "SRAM_CLK_OUT_s" />
<PORT CLKFREQUENCY= "125000000" DIR= "I" MHS_INDEX= "16" NAME= "fpga_0_SRAM_ZBT_CLK_FB_pin" SIGIS= "CLK" SIGNAME= "SRAM_CLK_FB_s" />
<PORT DIR= "I" MHS_INDEX= "17" NAME= "fpga_0_PCIe_Bridge_RXN_pin" SIGNAME= "fpga_0_PCIe_Bridge_RXN_pin" />
<PORT DIR= "I" MHS_INDEX= "18" NAME= "fpga_0_PCIe_Bridge_RXP_pin" SIGNAME= "fpga_0_PCIe_Bridge_RXP_pin" />
<PORT DIR= "O" MHS_INDEX= "19" NAME= "fpga_0_PCIe_Bridge_TXN_pin" SIGNAME= "fpga_0_PCIe_Bridge_TXN_pin" />
<PORT DIR= "O" MHS_INDEX= "20" NAME= "fpga_0_PCIe_Bridge_TXP_pin" SIGNAME= "fpga_0_PCIe_Bridge_TXP_pin" />
<PORT DIR= "I" MHS_INDEX= "21" NAME= "fpga_0_Ethernet_MAC_PHY_tx_clk_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_tx_clk_pin" />
<PORT DIR= "I" MHS_INDEX= "22" NAME= "fpga_0_Ethernet_MAC_PHY_rx_clk_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_rx_clk_pin" />
<PORT DIR= "I" MHS_INDEX= "23" NAME= "fpga_0_Ethernet_MAC_PHY_crs_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_crs_pin" />
<PORT DIR= "I" MHS_INDEX= "24" NAME= "fpga_0_Ethernet_MAC_PHY_dv_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_dv_pin" />
<PORT DIR= "I" ENDIAN= "LITTLE" LSB= "3" MHS_INDEX= "25" MSB= "0" NAME= "fpga_0_Ethernet_MAC_PHY_rx_data_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_rx_data_pin" />
<PORT DIR= "I" MHS_INDEX= "26" NAME= "fpga_0_Ethernet_MAC_PHY_col_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_col_pin" />
<PORT DIR= "I" MHS_INDEX= "27" NAME= "fpga_0_Ethernet_MAC_PHY_rx_er_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_rx_er_pin" />
<PORT DIR= "O" MHS_INDEX= "28" NAME= "fpga_0_Ethernet_MAC_PHY_rst_n_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_rst_n_pin" />
<PORT DIR= "O" MHS_INDEX= "29" NAME= "fpga_0_Ethernet_MAC_PHY_tx_en_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_tx_en_pin" />
<PORT DIR= "O" ENDIAN= "LITTLE" LSB= "3" MHS_INDEX= "30" MSB= "0" NAME= "fpga_0_Ethernet_MAC_PHY_tx_data_pin" SIGNAME= "fpga_0_Ethernet_MAC_PHY_tx_data_pin" />
<PORT DIR= "I" MHS_INDEX= "31" NAME= "fpga_0_Ethernet_MAC_MDINT_pin" SENSITIVITY= "LEVEL_LOW" SIGIS= "INTERRUPT" SIGNAME= "fpga_0_Ethernet_MAC_MDINT_pin" />
<PORT DIR= "IO" ENDIAN= "BIG" LSB= "63" MHS_INDEX= "32" MSB= "0" NAME= "fpga_0_DDR2_SDRAM_DDR2_DQ_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_DQ_pin" />
<PORT DIR= "IO" ENDIAN= "LITTLE" LSB= "7" MHS_INDEX= "33" MSB= "0" NAME= "fpga_0_DDR2_SDRAM_DDR2_DQS_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_DQS_pin" />
<PORT DIR= "IO" ENDIAN= "BIG" LSB= "7" MHS_INDEX= "34" MSB= "0" NAME= "fpga_0_DDR2_SDRAM_DDR2_DQS_N_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_DQS_N_pin" />
<PORT DIR= "O" ENDIAN= "LITTLE" LSB= "12" MHS_INDEX= "35" MSB= "0" NAME= "fpga_0_DDR2_SDRAM_DDR2_A_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_A_pin" />
<PORT DIR= "O" ENDIAN= "BIG" LSB= "1" MHS_INDEX= "36" MSB= "0" NAME= "fpga_0_DDR2_SDRAM_DDR2_BA_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_BA_pin" />
<PORT DIR= "O" MHS_INDEX= "37" NAME= "fpga_0_DDR2_SDRAM_DDR2_RAS_N_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_RAS_N_pin" />
<PORT DIR= "O" MHS_INDEX= "38" NAME= "fpga_0_DDR2_SDRAM_DDR2_CAS_N_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CAS_N_pin" />
<PORT DIR= "O" MHS_INDEX= "39" NAME= "fpga_0_DDR2_SDRAM_DDR2_WE_N_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_WE_N_pin" />
<PORT DIR= "O" MHS_INDEX= "40" NAME= "fpga_0_DDR2_SDRAM_DDR2_CS_N_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CS_N_pin" />
<PORT DIR= "O" ENDIAN= "LITTLE" LSB= "1" MHS_INDEX= "41" MSB= "0" NAME= "fpga_0_DDR2_SDRAM_DDR2_ODT_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_ODT_pin" />
<PORT DIR= "O" MHS_INDEX= "42" NAME= "fpga_0_DDR2_SDRAM_DDR2_CKE_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CKE_pin" />
<PORT DIR= "O" ENDIAN= "BIG" LSB= "7" MHS_INDEX= "43" MSB= "0" NAME= "fpga_0_DDR2_SDRAM_DDR2_DM_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_DM_pin" />
<PORT DIR= "O" ENDIAN= "LITTLE" LSB= "1" MHS_INDEX= "44" MSB= "0" NAME= "fpga_0_DDR2_SDRAM_DDR2_CK_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CK_pin" />
<PORT DIR= "O" ENDIAN= "BIG" LSB= "1" MHS_INDEX= "45" MSB= "0" NAME= "fpga_0_DDR2_SDRAM_DDR2_CK_N_pin" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CK_N_pin" />
<PORT DIR= "O" ENDIAN= "LITTLE" LSB= "6" MHS_INDEX= "46" MSB= "0" NAME= "fpga_0_SysACE_CompactFlash_SysACE_MPA_pin" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_MPA_pin" />
<PORT DIR= "I" MHS_INDEX= "47" NAME= "fpga_0_SysACE_CompactFlash_SysACE_CLK_pin" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_CLK_pin" />
<PORT DIR= "I" MHS_INDEX= "48" NAME= "fpga_0_SysACE_CompactFlash_SysACE_MPIRQ_pin" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_MPIRQ_pin" />
<PORT DIR= "O" MHS_INDEX= "49" NAME= "fpga_0_SysACE_CompactFlash_SysACE_CEN_pin" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_CEN_pin" />
<PORT DIR= "O" MHS_INDEX= "50" NAME= "fpga_0_SysACE_CompactFlash_SysACE_OEN_pin" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_OEN_pin" />
<PORT DIR= "O" MHS_INDEX= "51" NAME= "fpga_0_SysACE_CompactFlash_SysACE_WEN_pin" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_WEN_pin" />
<PORT DIR= "IO" ENDIAN= "BIG" LSB= "15" MHS_INDEX= "52" MSB= "0" NAME= "fpga_0_SysACE_CompactFlash_SysACE_MPD_pin" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_MPD_pin" />
<PORT CLKFREQUENCY= "100000000" DIR= "I" MHS_INDEX= "53" NAME= "fpga_0_clk_1_sys_clk_pin" SIGIS= "CLK" SIGNAME= "dcm_clk_s" />
<PORT DIR= "I" MHS_INDEX= "54" NAME= "fpga_0_rst_1_sys_rst_pin" RSTPOLARITY= "0" SIGIS= "RST" SIGNAME= "sys_rst_s" />
<PORT DIR= "I" MHS_INDEX= "55" NAME= "fpga_0_PCIe_Diff_Clk_IBUF_DS_P_pin" SIGIS= "CLK" SIGNAME= "PCIe_Diff_Clk" />
<PORT DIR= "I" MHS_INDEX= "56" NAME= "fpga_0_PCIe_Diff_Clk_IBUF_DS_N_pin" SIGIS= "CLK" SIGNAME= "PCIe_Diff_Clk" />
</EXTERNALPORTS>
<MODULES >
<MODULE HWVERSION= "1.01.a" INSTANCE= "ppc440_0" IPTYPE= "PROCESSOR" MHS_INDEX= "0" MODCLASS= "PROCESSOR" MODTYPE= "ppc440_virtex5" PROCTYPE= "PPC440" >
<DESCRIPTION TYPE= "SHORT" > PowerPC 440 Virtex-5</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > A wrapper to instantiate the PowerPC 440 Processor Block primitive</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/ppc440_virtex5_v1_01_a/doc/ppc440_virtex5.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER MPD_INDEX= "0" NAME= "C_PIR" TYPE= "std_logic_vector(28 to 31)" VALUE= "0b1111" >
<DESCRIPTION > Unique Processor ID</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "1" NAME= "C_ENDIAN_RESET" TYPE= "std_logic" VALUE= "0" >
<DESCRIPTION > Reset Value for Endian Storage Byte Ordering</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_USER_RESET" TYPE= "std_logic_vector(0 to 3)" VALUE= "0b0000" >
<DESCRIPTION > Reset Value for User Defined Storage Attributes: Tattribute[4:7]</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "3" NAME= "C_INTERCONNECT_IMASK" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > Interrupt Mask for Crossbar-related Interrupts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_ICU_RD_FETCH_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for all CPU Fetch Requests</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_ICU_RD_SPEC_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for all Speculative CPU Fetch Requests</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_ICU_RD_TOUCH_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for all CPU Fetch Requests Initiated by ICBT Instructions</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_DCU_RD_LD_CACHE_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for all CPU Cacheable Load Requests</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_DCU_RD_NONCACHE_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for CPU Non-cacheable Load Requests</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_DCU_RD_TOUCH_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for all CPU Load Requests Initiated by DCBT Instructions</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_DCU_RD_URGENT_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for an Urgent CPU Load Request</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_DCU_WR_FLUSH_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for CPU Write Requests Initiated by flush Instruction</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "12" NAME= "C_DCU_WR_STORE_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for CPU Write Requests Initiated by store Instructions</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_DCU_WR_URGENT_PLB_PRIO" TYPE= "std_logic_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > Arbitration Priority for an Urgent CPU Write Request</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "14" NAME= "C_DMA0_PLB_PRIO" TYPE= "bit_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "15" NAME= "C_DMA1_PLB_PRIO" TYPE= "bit_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "16" NAME= "C_DMA2_PLB_PRIO" TYPE= "bit_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "17" NAME= "C_DMA3_PLB_PRIO" TYPE= "bit_vector(0 to 1)" VALUE= "0b00" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "18" NAME= "C_IDCR_BASEADDR" TYPE= "std_logic_vector(0 to 9)" VALUE= "0b0000000000" >
<DESCRIPTION > Internal DCR Register Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "19" NAME= "C_IDCR_HIGHADDR" TYPE= "std_logic_vector(0 to 9)" VALUE= "0b0011111111" >
<DESCRIPTION > Internal DCR Register High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "20" NAME= "C_APU_CONTROL" TYPE= "BIT_VECTOR(0 to 16)" VALUE= "0b00010000000000000" >
<DESCRIPTION > APU Controller Configuration Register Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "21" NAME= "C_APU_UDI_0" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 0 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "22" NAME= "C_APU_UDI_1" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 1 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "23" NAME= "C_APU_UDI_2" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 2 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "24" NAME= "C_APU_UDI_3" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 3 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "25" NAME= "C_APU_UDI_4" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 4 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "26" NAME= "C_APU_UDI_5" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 5 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "27" NAME= "C_APU_UDI_6" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 6 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "28" NAME= "C_APU_UDI_7" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 7 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "29" NAME= "C_APU_UDI_8" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 8 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "30" NAME= "C_APU_UDI_9" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 9 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "31" NAME= "C_APU_UDI_10" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 10 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "32" NAME= "C_APU_UDI_11" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 11 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "33" NAME= "C_APU_UDI_12" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 12 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "34" NAME= "C_APU_UDI_13" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 13 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "35" NAME= "C_APU_UDI_14" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 14 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "36" NAME= "C_APU_UDI_15" TYPE= "BIT_VECTOR(0 to 23)" VALUE= "0b000000000000000000000000" >
<DESCRIPTION > UDI Configuration Register 15 Value</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "37" NAME= "C_PPC440MC_ADDR_BASE" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > Base Address of Memory</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "38" NAME= "C_PPC440MC_ADDR_HIGH" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x0fffffff" >
<DESCRIPTION > High Address of Memory </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "39" NAME= "C_PPC440MC_ROW_CONFLICT_MASK" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x003FFE00" >
<DESCRIPTION > Mask Used to Determine a Row Conflict</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "40" NAME= "C_PPC440MC_BANK_CONFLICT_MASK" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x00C00000" >
<DESCRIPTION > Mask Used to Determine a Bank Conflict</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "41" NAME= "C_PPC440MC_CONTROL" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0xF810008F" >
<DESCRIPTION > Control and Configuration for the MC Interface</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "42" NAME= "C_PPC440MC_PRIO_ICU" TYPE= "integer" VALUE= "4" >
<DESCRIPTION > Secondary Arbitration Priority for all Instruction Fetches from CPU</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "43" NAME= "C_PPC440MC_PRIO_DCUW" TYPE= "integer" VALUE= "3" >
<DESCRIPTION > Secondary Arbitration Priority for all Data Writes from CPU</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "44" NAME= "C_PPC440MC_PRIO_DCUR" TYPE= "integer" VALUE= "2" >
<DESCRIPTION > Secondary Arbitration Priority for all Data Reads from CPU</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "45" NAME= "C_PPC440MC_PRIO_SPLB1" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Secondary Arbitration Priority for SPLB1, DMA2 and DMA3</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "46" NAME= "C_PPC440MC_PRIO_SPLB0" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Secondary Arbitration Priority for SPLB0, DMA0 and DMA1</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "47" NAME= "C_PPC440MC_ARB_MODE" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Memory Control Interface Arbitration Mode</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "48" NAME= "C_PPC440MC_MAX_BURST" TYPE= "integer" VALUE= "8" >
<DESCRIPTION > Max Number of Quad-words per Burst thru Xbar to MC Interface</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "49" NAME= "C_MPLB_AWIDTH" TYPE= "integer" VALUE= "32" >
<DESCRIPTION > C_MPLB_AWIDTH</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "50" NAME= "C_MPLB_DWIDTH" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > C_MPLB_DWIDTH</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "51" NAME= "C_MPLB_NATIVE_DWIDTH" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > C_MPLB_NATIVE_DWIDTH</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "52" NAME= "C_MPLB_COUNTER" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x00000500" >
<DESCRIPTION > Watchdog Counter Threshold</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "53" NAME= "C_MPLB_PRIO_ICU" TYPE= "integer" VALUE= "4" >
<DESCRIPTION > Secondary Arbitration Prio for Instr Fetches</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "54" NAME= "C_MPLB_PRIO_DCUW" TYPE= "integer" VALUE= "3" >
<DESCRIPTION > Secondary Arbitration Prio for Data Writes</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "55" NAME= "C_MPLB_PRIO_DCUR" TYPE= "integer" VALUE= "2" >
<DESCRIPTION > Secondary Arbitration Prio for Data Reads</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "56" NAME= "C_MPLB_PRIO_SPLB1" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Secondary Arbitration Prio for SPLB1, DMA2, DMA3</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "57" NAME= "C_MPLB_PRIO_SPLB0" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Secondary Arbitration Prio for SPLB0, DMA0, DMA1</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "58" NAME= "C_MPLB_ARB_MODE" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > MPLB Arbitration Mode</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "59" NAME= "C_MPLB_SYNC_TATTRIBUTE" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Allow MBusy to Block MPLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "60" NAME= "C_MPLB_MAX_BURST" TYPE= "integer" VALUE= "8" >
<DESCRIPTION > Max Num of Quad-words in Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "61" NAME= "C_MPLB_ALLOW_LOCK_XFER" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Allow Locked Transfer</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "62" NAME= "C_MPLB_READ_PIPE_ENABLE" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Allow Read Addr Pipelining</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "63" NAME= "C_MPLB_WRITE_PIPE_ENABLE" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Allow Write Addr Pipelining</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "64" NAME= "C_MPLB_WRITE_POST_ENABLE" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Allow Posted Writes</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "65" NAME= "C_MPLB_P2P" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > C_MPLB_P2P</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "66" NAME= "C_MPLB_WDOG_ENABLE" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Enable Watchdog Timer</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "67" NAME= "C_SPLB0_AWIDTH" TYPE= "integer" VALUE= "32" >
<DESCRIPTION > C_SPLB0_AWIDTH</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "68" NAME= "C_SPLB0_DWIDTH" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > C_SPLB0_DWIDTH</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "69" NAME= "C_SPLB0_NATIVE_DWIDTH" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > C_SPLB0_NATIVE_DWIDTH</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "70" NAME= "C_SPLB0_SUPPORT_BURSTS" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > SPLB Support Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "71" NAME= "C_SPLB0_USE_MPLB_ADDR" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Allow SPLB0 to Access MPLB Addr</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "72" NAME= "C_SPLB0_NUM_MPLB_ADDR_RNG" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Number of MPLB Addr Ranges</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "73" NAME= "C_SPLB0_RNG_MC_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > Base Addr </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "74" NAME= "C_SPLB0_RNG_MC_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x0fffffff" >
<DESCRIPTION > High Addr </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" CHANGEDBY= "USER" MPD_INDEX= "75" NAME= "C_SPLB0_RNG0_MPLB_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x80000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" CHANGEDBY= "USER" MPD_INDEX= "76" NAME= "C_SPLB0_RNG0_MPLB_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "77" NAME= "C_SPLB0_RNG1_MPLB_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "78" NAME= "C_SPLB0_RNG1_MPLB_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "79" NAME= "C_SPLB0_RNG2_MPLB_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "80" NAME= "C_SPLB0_RNG2_MPLB_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "81" NAME= "C_SPLB0_RNG3_MPLB_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "82" NAME= "C_SPLB0_RNG3_MPLB_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "83" NAME= "C_SPLB0_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "84" NAME= "C_SPLB0_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Mid Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "85" NAME= "C_SPLB0_ALLOW_LOCK_XFER" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > SPLB Allow Locked Transfer</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "86" NAME= "C_SPLB0_READ_PIPE_ENABLE" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Enable SPLB Read Pipeline</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "87" NAME= "C_SPLB0_PROPAGATE_MIRQ" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Propagate MIRQ Signals from Xbar onto SPLB </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "88" NAME= "C_SPLB0_P2P" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Use P2P</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "89" NAME= "C_SPLB1_AWIDTH" TYPE= "integer" VALUE= "32" >
<DESCRIPTION > C_SPLB1_AWIDTH</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "90" NAME= "C_SPLB1_DWIDTH" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > C_SPLB1_DWIDTH</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "91" NAME= "C_SPLB1_NATIVE_DWIDTH" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > C_SPLB1_NATIVE_DWIDTH</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "92" NAME= "C_SPLB1_SUPPORT_BURSTS" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "93" NAME= "C_SPLB1_USE_MPLB_ADDR" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Allow SPLB1 to Access MPLB Addr</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "94" NAME= "C_SPLB1_NUM_MPLB_ADDR_RNG" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Number of MPLB Address Ranges</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" MPD_INDEX= "95" NAME= "C_SPLB1_RNG_MC_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > Base Addr </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" MPD_INDEX= "96" NAME= "C_SPLB1_RNG_MC_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > High Addr</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "97" NAME= "C_SPLB1_RNG0_MPLB_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "98" NAME= "C_SPLB1_RNG0_MPLB_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "99" NAME= "C_SPLB1_RNG1_MPLB_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "100" NAME= "C_SPLB1_RNG1_MPLB_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "101" NAME= "C_SPLB1_RNG2_MPLB_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "102" NAME= "C_SPLB1_RNG2_MPLB_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "103" NAME= "C_SPLB1_RNG3_MPLB_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0xffffffff" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "104" NAME= "C_SPLB1_RNG3_MPLB_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "105" NAME= "C_SPLB1_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "106" NAME= "C_SPLB1_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Mid Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "107" NAME= "C_SPLB1_ALLOW_LOCK_XFER" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "108" NAME= "C_SPLB1_READ_PIPE_ENABLE" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "109" NAME= "C_SPLB1_PROPAGATE_MIRQ" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "110" NAME= "C_SPLB1_P2P" TYPE= "integer" VALUE= "-1" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "111" NAME= "C_NUM_DMA" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Number of DMA Channel</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "112" NAME= "C_DMA0_TXCHANNELCTRL" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x01010000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "113" NAME= "C_DMA0_RXCHANNELCTRL" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x01010000" >
<DESCRIPTION > DMA 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "114" NAME= "C_DMA0_CONTROL" TYPE= "BIT_VECTOR(0 to 7)" VALUE= "0b00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "115" NAME= "C_DMA0_TXIRQTIMER" TYPE= "BIT_VECTOR(0 to 9)" VALUE= "0b1111111111" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "116" NAME= "C_DMA0_RXIRQTIMER" TYPE= "BIT_VECTOR(0 to 9)" VALUE= "0b1111111111" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "117" NAME= "C_DMA1_TXCHANNELCTRL" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x01010000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "118" NAME= "C_DMA1_RXCHANNELCTRL" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x01010000" >
<DESCRIPTION > DMA 1</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "119" NAME= "C_DMA1_CONTROL" TYPE= "BIT_VECTOR(0 to 7)" VALUE= "0b00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "120" NAME= "C_DMA1_TXIRQTIMER" TYPE= "BIT_VECTOR(0 to 9)" VALUE= "0b1111111111" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "121" NAME= "C_DMA1_RXIRQTIMER" TYPE= "BIT_VECTOR(0 to 9)" VALUE= "0b1111111111" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "122" NAME= "C_DMA2_TXCHANNELCTRL" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x01010000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "123" NAME= "C_DMA2_RXCHANNELCTRL" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x01010000" >
<DESCRIPTION > DMA 2</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "124" NAME= "C_DMA2_CONTROL" TYPE= "BIT_VECTOR(0 to 7)" VALUE= "0b00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "125" NAME= "C_DMA2_TXIRQTIMER" TYPE= "BIT_VECTOR(0 to 9)" VALUE= "0b1111111111" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "126" NAME= "C_DMA2_RXIRQTIMER" TYPE= "BIT_VECTOR(0 to 9)" VALUE= "0b1111111111" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "127" NAME= "C_DMA3_TXCHANNELCTRL" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x01010000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "128" NAME= "C_DMA3_RXCHANNELCTRL" TYPE= "BIT_VECTOR(0 to 31)" VALUE= "0x01010000" >
<DESCRIPTION > DMA 3</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "129" NAME= "C_DMA3_CONTROL" TYPE= "BIT_VECTOR(0 to 7)" VALUE= "0b00000000" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "130" NAME= "C_DMA3_TXIRQTIMER" TYPE= "BIT_VECTOR(0 to 9)" VALUE= "0b1111111111" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "131" NAME= "C_DMA3_RXIRQTIMER" TYPE= "BIT_VECTOR(0 to 9)" VALUE= "0b1111111111" >
<DESCRIPTION > </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "132" NAME= "C_DCR_AUTOLOCK_ENABLE" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Enable the Auto-lock Feature for the DCR Indirect Mode</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "133" NAME= "C_PPCDM_ASYNCMODE" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Synchronization Mode for the External MDCR Interface</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "134" NAME= "C_PPCDS_ASYNCMODE" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Synchronization Mode for the External SDCR Interface</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "135" NAME= "C_GENERATE_PLB_TIMESPECS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Generate Timing Constraint to Resynchronize SPLB MBusy Outputs</DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "0" BASENAME= "C_IDCR_BASEADDR" BASEVALUE= "0b0000000000" HIGHDECIMAL= "255" HIGHNAME= "C_IDCR_HIGHADDR" HIGHVALUE= "0b0011111111" MEMTYPE= "REGISTER" MINSIZE= "0x100" SIZE= "256" SIZEABRV= "256" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SDCR" />
<BUSINTERFACE NAME= "MDCR" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "0" BASENAME= "C_SPLB0_RNG_MC_BASEADDR" BASEVALUE= "0x00000000" HIGHDECIMAL= "268435455" HIGHNAME= "C_SPLB0_RNG_MC_HIGHADDR" HIGHVALUE= "0x0fffffff" MEMTYPE= "REGISTER" MINSIZE= "0x08000000" SIZE= "268435456" SIZEABRV= "256M" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB0" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2147483648" BASENAME= "C_SPLB0_RNG0_MPLB_BASEADDR" BASEVALUE= "0x80000000" HIGHDECIMAL= "4294967295" HIGHNAME= "C_SPLB0_RNG0_MPLB_HIGHADDR" HIGHVALUE= "0xffffffff" MEMTYPE= "BRIDGE" MINSIZE= "0x08000000" SIZE= "-2147483648" SIZEABRV= "2G" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB0" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_SPLB0_RNG1_MPLB_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_SPLB0_RNG1_MPLB_HIGHADDR" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" MINSIZE= "0x08000000" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB0" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_SPLB0_RNG2_MPLB_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_SPLB0_RNG2_MPLB_HIGHADDR" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" MINSIZE= "0x08000000" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB0" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_SPLB0_RNG3_MPLB_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_SPLB0_RNG3_MPLB_HIGHADDR" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" MINSIZE= "0x08000000" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB0" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_SPLB1_RNG_MC_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_SPLB1_RNG_MC_HIGHADDR" HIGHVALUE= "0x00000000" MEMTYPE= "REGISTER" MINSIZE= "0x08000000" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB1" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_SPLB1_RNG0_MPLB_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_SPLB1_RNG0_MPLB_HIGHADDR" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" MINSIZE= "0x08000000" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB1" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_SPLB1_RNG1_MPLB_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_SPLB1_RNG1_MPLB_HIGHADDR" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" MINSIZE= "0x08000000" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB1" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_SPLB1_RNG2_MPLB_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_SPLB1_RNG2_MPLB_HIGHADDR" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" MINSIZE= "0x08000000" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB1" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_SPLB1_RNG3_MPLB_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_SPLB1_RNG3_MPLB_HIGHADDR" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" MINSIZE= "0x08000000" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB1" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294959104" BASENAME= "C_BASEADDR" BASEVALUE= "0xffffe000" HIGHDECIMAL= "4294967295" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0xffffffff" INSTANCE= "xps_bram_if_cntlr_1" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "MEMORY" SIZE= "8192" SIZEABRV= "8K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2214592512" BASENAME= "C_BASEADDR" BASEVALUE= "0x84000000" HIGHDECIMAL= "2214658047" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8400ffff" INSTANCE= "RS232_Uart_1" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2168717312" BASENAME= "C_BASEADDR" BASEVALUE= "0x81440000" HIGHDECIMAL= "2168782847" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8144ffff" INSTANCE= "LEDs_8Bit" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2168586240" BASENAME= "C_BASEADDR" BASEVALUE= "0x81420000" HIGHDECIMAL= "2168651775" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8142ffff" INSTANCE= "LEDs_Positions" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2168455168" BASENAME= "C_BASEADDR" BASEVALUE= "0x81400000" HIGHDECIMAL= "2168520703" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8140ffff" INSTANCE= "Push_Buttons_5Bit" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2168848384" BASENAME= "C_BASEADDR" BASEVALUE= "0x81460000" HIGHDECIMAL= "2168913919" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8146ffff" INSTANCE= "DIP_Switches_8Bit" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2170552320" BASENAME= "C_BASEADDR" BASEVALUE= "0x81600000" HIGHDECIMAL= "2170617855" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8160ffff" INSTANCE= "IIC_EEPROM" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4160749568" BASENAME= "C_MEM0_BASEADDR" BASEVALUE= "0xf8000000" HIGHDECIMAL= "4161798143" HIGHNAME= "C_MEM0_HIGHADDR" HIGHVALUE= "0xf80fffff" INSTANCE= "SRAM" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "MEMORY" SIZE= "1048576" SIZEABRV= "1M" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2243952640" BASENAME= "C_BASEADDR" BASEVALUE= "0x85c00000" HIGHDECIMAL= "2244018175" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x85c0ffff" INSTANCE= "PCIe_Bridge" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "3221225472" BASENAME= "C_IPIFBAR_0" BASEVALUE= "0xc0000000" HIGHDECIMAL= "3758096383" HIGHNAME= "C_IPIFBAR_HIGHADDR_0" HIGHVALUE= "0xdfffffff" INSTANCE= "PCIe_Bridge" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "BRIDGE" SIZE= "536870912" SIZEABRV= "512M" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "3758096384" BASENAME= "C_IPIFBAR_1" BASEVALUE= "0xe0000000" HIGHDECIMAL= "4026531839" HIGHNAME= "C_IPIFBAR_HIGHADDR_1" HIGHVALUE= "0xefffffff" INSTANCE= "PCIe_Bridge" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "BRIDGE" SIZE= "268435456" SIZEABRV= "256M" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2164260864" BASENAME= "C_BASEADDR" BASEVALUE= "0x81000000" HIGHDECIMAL= "2164326399" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8100ffff" INSTANCE= "Ethernet_MAC" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2204106752" BASENAME= "C_BASEADDR" BASEVALUE= "0x83600000" HIGHDECIMAL= "2204172287" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8360ffff" INSTANCE= "SysACE_CompactFlash" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "2172649472" BASENAME= "C_BASEADDR" BASEVALUE= "0x81800000" HIGHDECIMAL= "2172715007" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8180ffff" INSTANCE= "xps_intc_0" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "plb_v46_0" />
</ACCESSROUTE>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "0" BASENAME= "C_MEM_BASEADDR" BASEVALUE= "0x00000000" HIGHDECIMAL= "268435455" HIGHNAME= "C_MEM_HIGHADDR" HIGHVALUE= "0x0fffffff" INSTANCE= "DDR2_SDRAM" IS_DATA= "TRUE" IS_INSTRUCTION= "TRUE" IS_VALID= "TRUE" MEMTYPE= "MEMORY" SIZE= "268435456" SIZEABRV= "256M" >
<ACCESSROUTE >
<ROUTEPNT INDEX= "0" INSTANCE= "ppc440_0_PPC440MC" />
</ACCESSROUTE>
</MEMRANGE>
</MEMORYMAP>
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "0" NAME= "CPMC440CLK" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0" />
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "2" NAME= "CPMINTERCONNECTCLK" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "2" MPD_INDEX= "4" NAME= "CPMINTERCONNECTCLKNTO1" SIGNAME= "net_vcc" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "3" MPD_INDEX= "24" NAME= "EICC440EXTIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "ppc440_0_EICC440EXTIRQ" />
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "4" MPD_INDEX= "78" NAME= "CPMMCCLK" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "MPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "__BUS__" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "5" MPD_INDEX= "91" NAME= "CPMPPCMPLBCLK" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB0" CLKFREQUENCY= "125000000" DEF_SIGNAME= "__BUS__" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "6" MPD_INDEX= "127" NAME= "CPMPPCS0PLBCLK" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT DIR= "I" MPD_INDEX= "1" NAME= "CPMC440CLKEN" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "3" NAME= "CPMINTERCONNECTCLKEN" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "5" NAME= "CPMC440CORECLOCKINACTIVE" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "6" NAME= "CPMC440TIMERCLOCK" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "7" NAME= "C440MACHINECHECK" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "8" NAME= "C440CPMCORESLEEPREQ" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "9" NAME= "C440CPMDECIRPTREQ" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "10" NAME= "C440CPMFITIRPTREQ" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "11" NAME= "C440CPMMSRCE" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "12" NAME= "C440CPMMSREE" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "13" NAME= "C440CPMTIMERRESETREQ" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "14" NAME= "C440CPMWDIRPTREQ" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "15" NAME= "PPCCPMINTERCONNECTBUSY" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "16" NAME= "DBGC440DEBUGHALT" SIGNAME= "__NOC__" >
<DESCRIPTION > JTAG HALT</DESCRIPTION>
</PORT>
<PORT DIR= "I" MPD_INDEX= "17" NAME= "DBGC440DEBUGHALTNEG" SIGNAME= "__NOC__" >
<DESCRIPTION > JTAG HALT INV</DESCRIPTION>
</PORT>
<PORT DIR= "I" MPD_INDEX= "18" NAME= "DBGC440SYSTEMSTATUS" SIGNAME= "__NOC__" VECFORMULA= "[0:4]" />
<PORT DIR= "I" MPD_INDEX= "19" NAME= "DBGC440UNCONDDEBUGEVENT" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "20" NAME= "C440DBGSYSTEMCONTROL" SIGNAME= "__NOC__" VECFORMULA= "[0:7]" />
<PORT DIR= "O" MPD_INDEX= "21" NAME= "SPLB0_Error" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT DIR= "O" MPD_INDEX= "22" NAME= "SPLB1_Error" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT DIR= "I" MPD_INDEX= "23" NAME= "EICC440CRITIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "25" NAME= "PPCEICINTERCONNECTIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "26" NAME= "CPMDCRCLK" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT BUS= "MDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "27" NAME= "DCRPPCDMACK" SIGNAME= "__NOC__" />
<PORT BUS= "MDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "28" NAME= "DCRPPCDMDBUSIN" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "MDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "29" NAME= "DCRPPCDMTIMEOUTWAIT" SIGNAME= "__NOC__" />
<PORT BUS= "MDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "30" NAME= "PPCDMDCRREAD" SIGNAME= "__NOC__" />
<PORT BUS= "MDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "31" NAME= "PPCDMDCRWRITE" SIGNAME= "__NOC__" />
<PORT BUS= "MDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "32" NAME= "PPCDMDCRABUS" SIGNAME= "__NOC__" VECFORMULA= "[0:9]" />
<PORT BUS= "MDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "33" NAME= "PPCDMDCRDBUSOUT" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "34" NAME= "DCRPPCDSREAD" SIGNAME= "__NOC__" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "35" NAME= "DCRPPCDSWRITE" SIGNAME= "__NOC__" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "36" NAME= "DCRPPCDSABUS" SIGNAME= "__NOC__" VECFORMULA= "[0:9]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "37" NAME= "DCRPPCDSDBUSOUT" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "38" NAME= "PPCDSDCRACK" SIGNAME= "__NOC__" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "39" NAME= "PPCDSDCRDBUSIN" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "40" NAME= "PPCDSDCRTIMEOUTWAIT" SIGNAME= "__NOC__" />
<PORT BUS= "MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "41" NAME= "CPMFCMCLK" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "42" NAME= "FCMAPUCR" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "43" NAME= "FCMAPUDONE" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "44" NAME= "FCMAPUEXCEPTION" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "45" NAME= "FCMAPUFPSCRFEX" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "46" NAME= "FCMAPURESULT" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "47" NAME= "FCMAPURESULTVALID" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "48" NAME= "FCMAPUSLEEPNOTREADY" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "49" NAME= "FCMAPUCONFIRMINSTR" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "50" NAME= "FCMAPUSTOREDATA" SIGNAME= "__NOC__" VECFORMULA= "[0:127]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "51" NAME= "APUFCMDECNONAUTON" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "52" NAME= "APUFCMDECFPUOP" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "53" NAME= "APUFCMDECLDSTXFERSIZE" SIGNAME= "__NOC__" VECFORMULA= "[0:2]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "54" NAME= "APUFCMDECLOAD" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "55" NAME= "APUFCMNEXTINSTRREADY" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "56" NAME= "APUFCMDECSTORE" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "57" NAME= "APUFCMDECUDI" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "58" NAME= "APUFCMDECUDIVALID" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "59" NAME= "APUFCMENDIAN" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "60" NAME= "APUFCMFLUSH" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "61" NAME= "APUFCMINSTRUCTION" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "62" NAME= "APUFCMINSTRVALID" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "63" NAME= "APUFCMLOADBYTEADDR" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "64" NAME= "APUFCMLOADDATA" SIGNAME= "__NOC__" VECFORMULA= "[0:127]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "65" NAME= "APUFCMLOADDVALID" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "66" NAME= "APUFCMOPERANDVALID" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "67" NAME= "APUFCMRADATA" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "68" NAME= "APUFCMRBDATA" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "69" NAME= "APUFCMWRITEBACKOK" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "70" NAME= "APUFCMMSRFE0" SIGNAME= "__NOC__" />
<PORT BUS= "MFCM:MFCB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "71" NAME= "APUFCMMSRFE1" SIGNAME= "__NOC__" />
<PORT BUS= "JTAGPPC" DEF_SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TCK" DIR= "I" MPD_INDEX= "72" NAME= "JTGC440TCK" SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TCK" >
<DESCRIPTION > JTAG TCK</DESCRIPTION>
</PORT>
<PORT BUS= "JTAGPPC" DEF_SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TDI" DIR= "I" MPD_INDEX= "73" NAME= "JTGC440TDI" SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TDI" >
<DESCRIPTION > JTAG TDI</DESCRIPTION>
</PORT>
<PORT BUS= "JTAGPPC" DEF_SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TMS" DIR= "I" MPD_INDEX= "74" NAME= "JTGC440TMS" SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TMS" >
<DESCRIPTION > JTAG TMS</DESCRIPTION>
</PORT>
<PORT BUS= "JTAGPPC" DEF_SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TRSTNEG" DIR= "I" MPD_INDEX= "75" NAME= "JTGC440TRSTNEG" SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TRSTNEG" >
<DESCRIPTION > JTAG TRST</DESCRIPTION>
</PORT>
<PORT BUS= "JTAGPPC" DEF_SIGNAME= "ppc440_0_jtagppc_bus_C405JTGTDO" DIR= "O" MPD_INDEX= "76" NAME= "C440JTGTDO" SIGNAME= "ppc440_0_jtagppc_bus_C405JTGTDO" >
<DESCRIPTION > JTAG TDO</DESCRIPTION>
</PORT>
<PORT BUS= "JTAGPPC" DEF_SIGNAME= "ppc440_0_jtagppc_bus_C405JTGTDOEN" DIR= "O" MPD_INDEX= "77" NAME= "C440JTGTDOEN" SIGNAME= "ppc440_0_jtagppc_bus_C405JTGTDOEN" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MCMIREADDATA" DIR= "I" MPD_INDEX= "79" NAME= "MCMIREADDATA" SIGNAME= "ppc440_0_PPC440MC_MCMIREADDATA" VECFORMULA= "[0:127]" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MCMIREADDATAVALID" DIR= "I" MPD_INDEX= "80" NAME= "MCMIREADDATAVALID" SIGNAME= "ppc440_0_PPC440MC_MCMIREADDATAVALID" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MCMIREADDATAERR" DIR= "I" MPD_INDEX= "81" NAME= "MCMIREADDATAERR" SIGNAME= "ppc440_0_PPC440MC_MCMIREADDATAERR" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MCMIADDRREADYTOACCEPT" DIR= "I" MPD_INDEX= "82" NAME= "MCMIADDRREADYTOACCEPT" SIGNAME= "ppc440_0_PPC440MC_MCMIADDRREADYTOACCEPT" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MIMCREADNOTWRITE" DIR= "O" MPD_INDEX= "83" NAME= "MIMCREADNOTWRITE" SIGNAME= "ppc440_0_PPC440MC_MIMCREADNOTWRITE" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MIMCADDRESS" DIR= "O" MPD_INDEX= "84" NAME= "MIMCADDRESS" SIGNAME= "ppc440_0_PPC440MC_MIMCADDRESS" VECFORMULA= "[0:35]" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MIMCADDRESSVALID" DIR= "O" MPD_INDEX= "85" NAME= "MIMCADDRESSVALID" SIGNAME= "ppc440_0_PPC440MC_MIMCADDRESSVALID" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MIMCWRITEDATA" DIR= "O" MPD_INDEX= "86" NAME= "MIMCWRITEDATA" SIGNAME= "ppc440_0_PPC440MC_MIMCWRITEDATA" VECFORMULA= "[0:127]" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MIMCWRITEDATAVALID" DIR= "O" MPD_INDEX= "87" NAME= "MIMCWRITEDATAVALID" SIGNAME= "ppc440_0_PPC440MC_MIMCWRITEDATAVALID" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MIMCBYTEENABLE" DIR= "O" MPD_INDEX= "88" NAME= "MIMCBYTEENABLE" SIGNAME= "ppc440_0_PPC440MC_MIMCBYTEENABLE" VECFORMULA= "[0:15]" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MIMCBANKCONFLICT" DIR= "O" MPD_INDEX= "89" NAME= "MIMCBANKCONFLICT" SIGNAME= "ppc440_0_PPC440MC_MIMCBANKCONFLICT" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_MIMCROWCONFLICT" DIR= "O" MPD_INDEX= "90" NAME= "MIMCROWCONFLICT" SIGNAME= "ppc440_0_PPC440MC_MIMCROWCONFLICT" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MBusy" DIR= "I" MPD_INDEX= "92" NAME= "PLBPPCMMBUSY" SIGNAME= "plb_v46_0_PLB_MBusy" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MIRQ" DIR= "I" MPD_INDEX= "93" NAME= "PLBPPCMMIRQ" SIGNAME= "plb_v46_0_PLB_MIRQ" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MRdErr" DIR= "I" MPD_INDEX= "94" NAME= "PLBPPCMMRDERR" SIGNAME= "plb_v46_0_PLB_MRdErr" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MWrErr" DIR= "I" MPD_INDEX= "95" NAME= "PLBPPCMMWRERR" SIGNAME= "plb_v46_0_PLB_MWrErr" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MAddrAck" DIR= "I" MPD_INDEX= "96" NAME= "PLBPPCMADDRACK" SIGNAME= "plb_v46_0_PLB_MAddrAck" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MRdBTerm" DIR= "I" MPD_INDEX= "97" NAME= "PLBPPCMRDBTERM" SIGNAME= "plb_v46_0_PLB_MRdBTerm" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MRdDAck" DIR= "I" MPD_INDEX= "98" NAME= "PLBPPCMRDDACK" SIGNAME= "plb_v46_0_PLB_MRdDAck" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MRdDBus" DIR= "I" MPD_INDEX= "99" NAME= "PLBPPCMRDDBUS" SIGNAME= "plb_v46_0_PLB_MRdDBus" VECFORMULA= "[0:127]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MRdWdAddr" DIR= "I" MPD_INDEX= "100" NAME= "PLBPPCMRDWDADDR" SIGNAME= "plb_v46_0_PLB_MRdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MRearbitrate" DIR= "I" MPD_INDEX= "101" NAME= "PLBPPCMREARBITRATE" SIGNAME= "plb_v46_0_PLB_MRearbitrate" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSSize" DIR= "I" MPD_INDEX= "102" NAME= "PLBPPCMSSIZE" SIGNAME= "plb_v46_0_PLB_MSSize" VECFORMULA= "[0:1]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MTimeout" DIR= "I" MPD_INDEX= "103" NAME= "PLBPPCMTIMEOUT" SIGNAME= "plb_v46_0_PLB_MTimeout" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MWrBTerm" DIR= "I" MPD_INDEX= "104" NAME= "PLBPPCMWRBTERM" SIGNAME= "plb_v46_0_PLB_MWrBTerm" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_MWrDAck" DIR= "I" MPD_INDEX= "105" NAME= "PLBPPCMWRDACK" SIGNAME= "plb_v46_0_PLB_MWrDAck" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "106" NAME= "PLBPPCMRDPENDPRI" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "107" NAME= "PLBPPCMRDPENDREQ" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "108" NAME= "PLBPPCMREQPRI" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "109" NAME= "PLBPPCMWRPENDPRI" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "110" NAME= "PLBPPCMWRPENDREQ" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_abort" DIR= "O" MPD_INDEX= "111" NAME= "PPCMPLBABORT" SIGNAME= "plb_v46_0_M_abort" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_ABus" DIR= "O" MPD_INDEX= "112" NAME= "PPCMPLBABUS" SIGNAME= "plb_v46_0_M_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_BE" DIR= "O" MPD_INDEX= "113" NAME= "PPCMPLBBE" SIGNAME= "plb_v46_0_M_BE" VECFORMULA= "[0:15]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_busLock" DIR= "O" MPD_INDEX= "114" NAME= "PPCMPLBBUSLOCK" SIGNAME= "plb_v46_0_M_busLock" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_lockErr" DIR= "O" MPD_INDEX= "115" NAME= "PPCMPLBLOCKERR" SIGNAME= "plb_v46_0_M_lockErr" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_MSize" DIR= "O" MPD_INDEX= "116" NAME= "PPCMPLBMSIZE" SIGNAME= "plb_v46_0_M_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_priority" DIR= "O" MPD_INDEX= "117" NAME= "PPCMPLBPRIORITY" SIGNAME= "plb_v46_0_M_priority" VECFORMULA= "[0:1]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_rdBurst" DIR= "O" MPD_INDEX= "118" NAME= "PPCMPLBRDBURST" SIGNAME= "plb_v46_0_M_rdBurst" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_request" DIR= "O" MPD_INDEX= "119" NAME= "PPCMPLBREQUEST" SIGNAME= "plb_v46_0_M_request" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_RNW" DIR= "O" MPD_INDEX= "120" NAME= "PPCMPLBRNW" SIGNAME= "plb_v46_0_M_RNW" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_size" DIR= "O" MPD_INDEX= "121" NAME= "PPCMPLBSIZE" SIGNAME= "plb_v46_0_M_size" VECFORMULA= "[0:3]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_TAttribute" DIR= "O" MPD_INDEX= "122" NAME= "PPCMPLBTATTRIBUTE" SIGNAME= "plb_v46_0_M_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_type" DIR= "O" MPD_INDEX= "123" NAME= "PPCMPLBTYPE" SIGNAME= "plb_v46_0_M_type" VECFORMULA= "[0:2]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_UABus" DIR= "O" MPD_INDEX= "124" NAME= "PPCMPLBUABUS" SIGNAME= "plb_v46_0_M_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_wrBurst" DIR= "O" MPD_INDEX= "125" NAME= "PPCMPLBWRBURST" SIGNAME= "plb_v46_0_M_wrBurst" />
<PORT BUS= "MPLB" DEF_SIGNAME= "plb_v46_0_M_wrDBus" DIR= "O" MPD_INDEX= "126" NAME= "PPCMPLBWRDBUS" SIGNAME= "plb_v46_0_M_wrDBus" VECFORMULA= "[0:127]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_masterID" DIR= "I" MPD_INDEX= "128" NAME= "PLBPPCS0MASTERID" SIGNAME= "ppc440_0_SPLB0_PLB_masterID" VECFORMULA= "[0:(C_SPLB0_MID_WIDTH-1)]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_PAValid" DIR= "I" MPD_INDEX= "129" NAME= "PLBPPCS0PAVALID" SIGNAME= "ppc440_0_SPLB0_PLB_PAValid" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_SAValid" DIR= "I" MPD_INDEX= "130" NAME= "PLBPPCS0SAVALID" SIGNAME= "ppc440_0_SPLB0_PLB_SAValid" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "131" NAME= "PLBPPCS0RDPENDREQ" SIGNAME= "ppc440_0_SPLB0_PLB_rdPendReq" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "132" NAME= "PLBPPCS0WRPENDREQ" SIGNAME= "ppc440_0_SPLB0_PLB_wrPendReq" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "133" NAME= "PLBPPCS0RDPENDPRI" SIGNAME= "ppc440_0_SPLB0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "134" NAME= "PLBPPCS0WRPENDPRI" SIGNAME= "ppc440_0_SPLB0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_reqPri" DIR= "I" MPD_INDEX= "135" NAME= "PLBPPCS0REQPRI" SIGNAME= "ppc440_0_SPLB0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_rdPrim" DIR= "I" MPD_INDEX= "136" NAME= "PLBPPCS0RDPRIM" SIGNAME= "ppc440_0_SPLB0_PLB_rdPrim" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_wrPrim" DIR= "I" MPD_INDEX= "137" NAME= "PLBPPCS0WRPRIM" SIGNAME= "ppc440_0_SPLB0_PLB_wrPrim" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_busLock" DIR= "I" MPD_INDEX= "138" NAME= "PLBPPCS0BUSLOCK" SIGNAME= "ppc440_0_SPLB0_PLB_busLock" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_abort" DIR= "I" MPD_INDEX= "139" NAME= "PLBPPCS0ABORT" SIGNAME= "ppc440_0_SPLB0_PLB_abort" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_RNW" DIR= "I" MPD_INDEX= "140" NAME= "PLBPPCS0RNW" SIGNAME= "ppc440_0_SPLB0_PLB_RNW" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_BE" DIR= "I" MPD_INDEX= "141" NAME= "PLBPPCS0BE" SIGNAME= "ppc440_0_SPLB0_PLB_BE" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_size" DIR= "I" MPD_INDEX= "142" NAME= "PLBPPCS0SIZE" SIGNAME= "ppc440_0_SPLB0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_type" DIR= "I" MPD_INDEX= "143" NAME= "PLBPPCS0TYPE" SIGNAME= "ppc440_0_SPLB0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_TAttribute" DIR= "I" MPD_INDEX= "144" NAME= "PLBPPCS0TATTRIBUTE" SIGNAME= "ppc440_0_SPLB0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_lockErr" DIR= "I" MPD_INDEX= "145" NAME= "PLBPPCS0LOCKERR" SIGNAME= "ppc440_0_SPLB0_PLB_lockErr" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MSize" DIR= "I" MPD_INDEX= "146" NAME= "PLBPPCS0MSIZE" SIGNAME= "ppc440_0_SPLB0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_UABus" DIR= "I" MPD_INDEX= "147" NAME= "PLBPPCS0UABUS" SIGNAME= "ppc440_0_SPLB0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_ABus" DIR= "I" MPD_INDEX= "148" NAME= "PLBPPCS0ABUS" SIGNAME= "ppc440_0_SPLB0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_wrDBus" DIR= "I" MPD_INDEX= "149" NAME= "PLBPPCS0WRDBUS" SIGNAME= "ppc440_0_SPLB0_PLB_wrDBus" VECFORMULA= "[0:127]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_wrBurst" DIR= "I" MPD_INDEX= "150" NAME= "PLBPPCS0WRBURST" SIGNAME= "ppc440_0_SPLB0_PLB_wrBurst" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_rdBurst" DIR= "I" MPD_INDEX= "151" NAME= "PLBPPCS0RDBURST" SIGNAME= "ppc440_0_SPLB0_PLB_rdBurst" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_addrAck" DIR= "O" MPD_INDEX= "152" NAME= "PPCS0PLBADDRACK" SIGNAME= "ppc440_0_SPLB0_Sl_addrAck" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_wait" DIR= "O" MPD_INDEX= "153" NAME= "PPCS0PLBWAIT" SIGNAME= "ppc440_0_SPLB0_Sl_wait" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "154" NAME= "PPCS0PLBREARBITRATE" SIGNAME= "ppc440_0_SPLB0_Sl_rearbitrate" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_wrDAck" DIR= "O" MPD_INDEX= "155" NAME= "PPCS0PLBWRDACK" SIGNAME= "ppc440_0_SPLB0_Sl_wrDAck" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_wrComp" DIR= "O" MPD_INDEX= "156" NAME= "PPCS0PLBWRCOMP" SIGNAME= "ppc440_0_SPLB0_Sl_wrComp" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_rdDBus" DIR= "O" MPD_INDEX= "157" NAME= "PPCS0PLBRDDBUS" SIGNAME= "ppc440_0_SPLB0_Sl_rdDBus" VECFORMULA= "[0:127]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "158" NAME= "PPCS0PLBRDWDADDR" SIGNAME= "ppc440_0_SPLB0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_rdDAck" DIR= "O" MPD_INDEX= "159" NAME= "PPCS0PLBRDDACK" SIGNAME= "ppc440_0_SPLB0_Sl_rdDAck" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_rdComp" DIR= "O" MPD_INDEX= "160" NAME= "PPCS0PLBRDCOMP" SIGNAME= "ppc440_0_SPLB0_Sl_rdComp" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "161" NAME= "PPCS0PLBRDBTERM" SIGNAME= "ppc440_0_SPLB0_Sl_rdBTerm" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "162" NAME= "PPCS0PLBWRBTERM" SIGNAME= "ppc440_0_SPLB0_Sl_wrBTerm" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_MBusy" DIR= "O" MPD_INDEX= "163" NAME= "PPCS0PLBMBUSY" SIGNAME= "ppc440_0_SPLB0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB0_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_MRdErr" DIR= "O" MPD_INDEX= "164" NAME= "PPCS0PLBMRDERR" SIGNAME= "ppc440_0_SPLB0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB0_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_MWrErr" DIR= "O" MPD_INDEX= "165" NAME= "PPCS0PLBMWRERR" SIGNAME= "ppc440_0_SPLB0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB0_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_MIRQ" DIR= "O" MPD_INDEX= "166" NAME= "PPCS0PLBMIRQ" SIGNAME= "ppc440_0_SPLB0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB0_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB0" DEF_SIGNAME= "ppc440_0_SPLB0_Sl_SSize" DIR= "O" MPD_INDEX= "167" NAME= "PPCS0PLBSSIZE" SIGNAME= "ppc440_0_SPLB0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "168" NAME= "CPMPPCS1PLBCLK" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "169" NAME= "PLBPPCS1MASTERID" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_SPLB1_MID_WIDTH-1)]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "170" NAME= "PLBPPCS1PAVALID" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "171" NAME= "PLBPPCS1SAVALID" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "172" NAME= "PLBPPCS1RDPENDREQ" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "173" NAME= "PLBPPCS1WRPENDREQ" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "174" NAME= "PLBPPCS1RDPENDPRI" SIGNAME= "__NOC__" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "175" NAME= "PLBPPCS1WRPENDPRI" SIGNAME= "__NOC__" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "176" NAME= "PLBPPCS1REQPRI" SIGNAME= "__NOC__" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "177" NAME= "PLBPPCS1RDPRIM" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "178" NAME= "PLBPPCS1WRPRIM" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "179" NAME= "PLBPPCS1BUSLOCK" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "180" NAME= "PLBPPCS1ABORT" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "181" NAME= "PLBPPCS1RNW" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "182" NAME= "PLBPPCS1BE" SIGNAME= "__NOC__" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "183" NAME= "PLBPPCS1SIZE" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "184" NAME= "PLBPPCS1TYPE" SIGNAME= "__NOC__" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "185" NAME= "PLBPPCS1TATTRIBUTE" SIGNAME= "__NOC__" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "186" NAME= "PLBPPCS1LOCKERR" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "187" NAME= "PLBPPCS1MSIZE" SIGNAME= "__NOC__" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "188" NAME= "PLBPPCS1UABUS" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "189" NAME= "PLBPPCS1ABUS" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "190" NAME= "PLBPPCS1WRDBUS" SIGNAME= "__NOC__" VECFORMULA= "[0:127]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "191" NAME= "PLBPPCS1WRBURST" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "192" NAME= "PLBPPCS1RDBURST" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "193" NAME= "PPCS1PLBADDRACK" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "194" NAME= "PPCS1PLBWAIT" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "195" NAME= "PPCS1PLBREARBITRATE" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "196" NAME= "PPCS1PLBWRDACK" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "197" NAME= "PPCS1PLBWRCOMP" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "198" NAME= "PPCS1PLBRDDBUS" SIGNAME= "__NOC__" VECFORMULA= "[0:127]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "199" NAME= "PPCS1PLBRDWDADDR" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "200" NAME= "PPCS1PLBRDDACK" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "201" NAME= "PPCS1PLBRDCOMP" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "202" NAME= "PPCS1PLBRDBTERM" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "203" NAME= "PPCS1PLBWRBTERM" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "204" NAME= "PPCS1PLBMBUSY" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_SPLB1_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "205" NAME= "PPCS1PLBMRDERR" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_SPLB1_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "206" NAME= "PPCS1PLBMWRERR" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_SPLB1_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "207" NAME= "PPCS1PLBMIRQ" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_SPLB1_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "208" NAME= "PPCS1PLBSSIZE" SIGNAME= "__NOC__" VECFORMULA= "[0:1]" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "209" NAME= "CPMDMA0LLCLK" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "210" NAME= "LLDMA0TXDSTRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "211" NAME= "LLDMA0RXD" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "212" NAME= "LLDMA0RXREM" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "213" NAME= "LLDMA0RXSOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "214" NAME= "LLDMA0RXEOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "215" NAME= "LLDMA0RXSOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "216" NAME= "LLDMA0RXEOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "217" NAME= "LLDMA0RXSRCRDYN" SIGNAME= "__NOC__" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "218" NAME= "LLDMA0RSTENGINEREQ" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "219" NAME= "DMA0LLTXD" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "220" NAME= "DMA0LLTXREM" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "221" NAME= "DMA0LLTXSOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "222" NAME= "DMA0LLTXEOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "223" NAME= "DMA0LLTXSOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "224" NAME= "DMA0LLTXEOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "225" NAME= "DMA0LLTXSRCRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "226" NAME= "DMA0LLRXDSTRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA0" DEF_SIGNAME= "__BUS__" DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "227" NAME= "DMA0LLRSTENGINEACK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "228" NAME= "DMA0TXIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "229" NAME= "DMA0RXIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "230" NAME= "CPMDMA1LLCLK" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "231" NAME= "LLDMA1TXDSTRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "232" NAME= "LLDMA1RXD" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "233" NAME= "LLDMA1RXREM" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "234" NAME= "LLDMA1RXSOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "235" NAME= "LLDMA1RXEOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "236" NAME= "LLDMA1RXSOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "237" NAME= "LLDMA1RXEOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "238" NAME= "LLDMA1RXSRCRDYN" SIGNAME= "__NOC__" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "239" NAME= "LLDMA1RSTENGINEREQ" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "240" NAME= "DMA1LLTXD" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "241" NAME= "DMA1LLTXREM" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "242" NAME= "DMA1LLTXSOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "243" NAME= "DMA1LLTXEOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "244" NAME= "DMA1LLTXSOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "245" NAME= "DMA1LLTXEOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "246" NAME= "DMA1LLTXSRCRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "247" NAME= "DMA1LLRXDSTRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA1" DEF_SIGNAME= "__BUS__" DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "248" NAME= "DMA1LLRSTENGINEACK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "249" NAME= "DMA1TXIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "250" NAME= "DMA1RXIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "251" NAME= "CPMDMA2LLCLK" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "252" NAME= "LLDMA2TXDSTRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "253" NAME= "LLDMA2RXD" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "254" NAME= "LLDMA2RXREM" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "255" NAME= "LLDMA2RXSOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "256" NAME= "LLDMA2RXEOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "257" NAME= "LLDMA2RXSOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "258" NAME= "LLDMA2RXEOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "259" NAME= "LLDMA2RXSRCRDYN" SIGNAME= "__NOC__" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "260" NAME= "LLDMA2RSTENGINEREQ" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "261" NAME= "DMA2LLTXD" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "262" NAME= "DMA2LLTXREM" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "263" NAME= "DMA2LLTXSOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "264" NAME= "DMA2LLTXEOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "265" NAME= "DMA2LLTXSOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "266" NAME= "DMA2LLTXEOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "267" NAME= "DMA2LLTXSRCRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "268" NAME= "DMA2LLRXDSTRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA2" DEF_SIGNAME= "__BUS__" DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "269" NAME= "DMA2LLRSTENGINEACK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "270" NAME= "DMA2TXIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "271" NAME= "DMA2RXIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "272" NAME= "CPMDMA3LLCLK" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "273" NAME= "LLDMA3TXDSTRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "274" NAME= "LLDMA3RXD" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "275" NAME= "LLDMA3RXREM" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "276" NAME= "LLDMA3RXSOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "277" NAME= "LLDMA3RXEOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "278" NAME= "LLDMA3RXSOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "279" NAME= "LLDMA3RXEOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "280" NAME= "LLDMA3RXSRCRDYN" SIGNAME= "__NOC__" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "281" NAME= "LLDMA3RSTENGINEREQ" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "282" NAME= "DMA3LLTXD" SIGNAME= "__NOC__" VECFORMULA= "[0:31]" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "283" NAME= "DMA3LLTXREM" SIGNAME= "__NOC__" VECFORMULA= "[0:3]" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "284" NAME= "DMA3LLTXSOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "285" NAME= "DMA3LLTXEOFN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "286" NAME= "DMA3LLTXSOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "287" NAME= "DMA3LLTXEOPN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "288" NAME= "DMA3LLTXSRCRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "289" NAME= "DMA3LLRXDSTRDYN" SIGNAME= "__NOC__" />
<PORT BUS= "LLDMA3" DEF_SIGNAME= "__BUS__" DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "290" NAME= "DMA3LLRSTENGINEACK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "291" NAME= "DMA3TXIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "292" NAME= "DMA3RXIRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT BUS= "RESETPPC" DEF_SIGNAME= "ppc_reset_bus_RstcPPCresetcore" DIR= "I" MPD_INDEX= "293" NAME= "RSTC440RESETCORE" SIGIS= "RST" SIGNAME= "ppc_reset_bus_RstcPPCresetcore" />
<PORT BUS= "RESETPPC" DEF_SIGNAME= "ppc_reset_bus_RstsPPCresetchip" DIR= "I" MPD_INDEX= "294" NAME= "RSTC440RESETCHIP" SIGIS= "RST" SIGNAME= "ppc_reset_bus_RstsPPCresetchip" />
<PORT BUS= "RESETPPC" DEF_SIGNAME= "ppc_reset_bus_RstcPPCresetsys" DIR= "I" MPD_INDEX= "295" NAME= "RSTC440RESETSYSTEM" SIGIS= "RST" SIGNAME= "ppc_reset_bus_RstcPPCresetsys" />
<PORT BUS= "RESETPPC" DEF_SIGNAME= "ppc_reset_bus_Core_Reset_Req" DIR= "O" MPD_INDEX= "296" NAME= "C440RSTCORERESETREQ" SIGIS= "RST" SIGNAME= "ppc_reset_bus_Core_Reset_Req" />
<PORT BUS= "RESETPPC" DEF_SIGNAME= "ppc_reset_bus_Chip_Reset_Req" DIR= "O" MPD_INDEX= "297" NAME= "C440RSTCHIPRESETREQ" SIGIS= "RST" SIGNAME= "ppc_reset_bus_Chip_Reset_Req" />
<PORT BUS= "RESETPPC" DEF_SIGNAME= "ppc_reset_bus_System_Reset_Req" DIR= "O" MPD_INDEX= "298" NAME= "C440RSTSYSTEMRESETREQ" SIGIS= "RST" SIGNAME= "ppc_reset_bus_System_Reset_Req" />
<PORT DIR= "I" MPD_INDEX= "299" NAME= "TRCC440TRACEDISABLE" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "300" NAME= "TRCC440TRIGGEREVENTIN" SIGNAME= "__NOC__" >
<DESCRIPTION > Trace Trigger Event In</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "301" NAME= "C440TRCBRANCHSTATUS" SIGNAME= "__NOC__" VECFORMULA= "[0:2]" >
<DESCRIPTION > Trace Branch Status</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "302" NAME= "C440TRCCYCLE" SIGNAME= "__NOC__" >
<DESCRIPTION > Trace Clock</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "303" NAME= "C440TRCEXECUTIONSTATUS" SIGNAME= "__NOC__" VECFORMULA= "[0:4]" >
<DESCRIPTION > Trace Execution Status</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "304" NAME= "C440TRCTRACESTATUS" SIGNAME= "__NOC__" VECFORMULA= "[0:6]" >
<DESCRIPTION > Trace Status</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "305" NAME= "C440TRCTRIGGEREVENTOUT" SIGNAME= "__NOC__" >
<DESCRIPTION > Trace Trigger Event Out</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "306" NAME= "C440TRCTRIGGEREVENTTYPE" SIGNAME= "__NOC__" VECFORMULA= "[0:13]" />
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_DATA= "TRUE" IS_INMHS= "TRUE" IS_INSTRUCTION= "TRUE" MPD_INDEX= "0" NAME= "MPLB" TYPE= "MASTER" />
<BUSINTERFACE BUSNAME= "ppc440_0_SPLB0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "1" NAME= "SPLB0" TYPE= "SLAVE" />
<BUSINTERFACE BUSNAME= "ppc440_0_PPC440MC" BUSSTD= "XIL" BUSSTD_PSF= "XIL_PPC440MC" IS_DATA= "TRUE" IS_INMHS= "TRUE" IS_INSTRUCTION= "TRUE" MPD_INDEX= "3" NAME= "PPC440MC" TYPE= "INITIATOR" />
<BUSINTERFACE BUSNAME= "ppc440_0_jtagppc_bus" BUSSTD= "XIL" BUSSTD_PSF= "XIL_JTAGPPC" IS_INMHS= "TRUE" MPD_INDEX= "12" NAME= "JTAGPPC" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "ppc_reset_bus" BUSSTD= "XIL" BUSSTD_PSF= "XIL_RESETPPC" IS_INMHS= "TRUE" MPD_INDEX= "13" NAME= "RESETPPC" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" MPD_INDEX= "2" NAME= "SPLB1" TYPE= "SLAVE" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_LL_DMA" IS_VALID= "FALSE" MPD_INDEX= "4" NAME= "LLDMA0" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_LL_DMA" IS_VALID= "FALSE" MPD_INDEX= "5" NAME= "LLDMA1" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_LL_DMA" IS_VALID= "FALSE" MPD_INDEX= "6" NAME= "LLDMA2" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_LL_DMA" IS_VALID= "FALSE" MPD_INDEX= "7" NAME= "LLDMA3" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "DCR" BUSSTD_PSF= "DCR" MPD_INDEX= "8" NAME= "MDCR" TYPE= "MASTER" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "DCR" BUSSTD_PSF= "DCR" MPD_INDEX= "9" NAME= "SDCR" TYPE= "SLAVE" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "FCB" BUSSTD_PSF= "FCB2" MPD_INDEX= "10" NAME= "MFCB" TYPE= "MASTER" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_FCM2" MPD_INDEX= "11" NAME= "MFCM" TYPE= "INITIATOR" />
<PERIPHERALS >
<MODULE INSTANCE= "xps_bram_if_cntlr_1" />
<MODULE INSTANCE= "RS232_Uart_1" />
<MODULE INSTANCE= "LEDs_8Bit" />
<MODULE INSTANCE= "LEDs_Positions" />
<MODULE INSTANCE= "Push_Buttons_5Bit" />
<MODULE INSTANCE= "DIP_Switches_8Bit" />
<MODULE INSTANCE= "IIC_EEPROM" />
<MODULE INSTANCE= "SRAM" />
<MODULE INSTANCE= "PCIe_Bridge" />
<MODULE INSTANCE= "Ethernet_MAC" />
<MODULE INSTANCE= "SysACE_CompactFlash" />
<MODULE INSTANCE= "xps_intc_0" />
<MODULE INSTANCE= "DDR2_SDRAM" />
</PERIPHERALS>
<INTERRUPTINFO INTC_INDEX= "0" INTERRUPT_CNTLR= "xps_intc_0" TYPE= "TARGET" />
</MODULE>
<MODULE BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" HWVERSION= "1.04.a" INSTANCE= "plb_v46_0" IPTYPE= "BUS" MHS_INDEX= "1" MODCLASS= "BUS" MODTYPE= "plb_v46" >
<DESCRIPTION TYPE= "SHORT" > Processor Local Bus (PLB) 4.6</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > 'Xilinx 64-bit Processor Local Bus (PLB) consists of a bus control unit, a watchdog timer, and separate address, write, and read data path units with a a three-cycle only arbitration feature'</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/plb_v46_v1_04_a/doc/plb_v46.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "0" NAME= "C_PLBV46_NUM_MASTERS" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "1" NAME= "C_PLBV46_NUM_SLAVES" TYPE= "integer" VALUE= "12" >
<DESCRIPTION > Number of PLB Slaves</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "2" NAME= "C_PLBV46_MID_WIDTH" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > PLB Master ID Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "3" NAME= "C_PLBV46_AWIDTH" TYPE= "integer" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "4" NAME= "C_PLBV46_DWIDTH" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_DCR_INTFCE" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Include DCR Interface and Error Registers</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" MPD_INDEX= "6" NAME= "C_BASEADDR" TYPE= "std_logic_vector" VALUE= "0b1111111111" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" MPD_INDEX= "7" NAME= "C_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0b0000000000" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_DCR_AWIDTH" TYPE= "integer" VALUE= "10" >
<DESCRIPTION > DCR Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_DCR_DWIDTH" TYPE= "integer" VALUE= "32" >
<DESCRIPTION > DCR Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_EXT_RESET_HIGH" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > External Reset Active High </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_IRQ_ACTIVE" TYPE= "std_logic" VALUE= "1" >
<DESCRIPTION > IRQ Active State </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "12" NAME= "C_NUM_CLK_PLB2OPB_REARB" TYPE= "integer" VALUE= "5" >
<DESCRIPTION > < qt> Number of PLB Clock Periods a PLB Master that Received a Rearbitrate from an OPB2PLB Bridge on a Read Operation is Denied Grant on the PLB Bus< /qt> </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_ADDR_PIPELINING_TYPE" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Enable Address Pipelining Type</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "14" NAME= "C_FAMILY" TYPE= "string" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "15" NAME= "C_P2P" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Optimize PLB for Point-to-point Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "16" NAME= "C_ARB_TYPE" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Selects the Arbitration Scheme</DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "1023" BASENAME= "C_BASEADDR" BASEVALUE= "0b1111111111" HIGHDECIMAL= "0" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0b0000000000" IS_VALID= "FALSE" MEMTYPE= "REGISTER" MINSIZE= "0x08" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SDCR" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "0" NAME= "PLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "1" NAME= "SYS_Rst" SIGIS= "RST" SIGNAME= "sys_bus_reset" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_Rst" DIR= "O" MPD_INDEX= "2" NAME= "PLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_PLB_Rst" />
<PORT DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "O" MPD_INDEX= "3" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_MPLB_Rst" DIR= "O" MPD_INDEX= "4" NAME= "MPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_MPLB_Rst" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "5" NAME= "PLB_dcrAck" SIGNAME= "__NOC__" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "6" NAME= "PLB_dcrDBus" SIGNAME= "__NOC__" VECFORMULA= "[0:C_DCR_DWIDTH-1]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "7" NAME= "DCR_ABus" SIGNAME= "__NOC__" VECFORMULA= "[0:C_DCR_AWIDTH-1]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "8" NAME= "DCR_DBus" SIGNAME= "__NOC__" VECFORMULA= "[0:C_DCR_DWIDTH-1]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "9" NAME= "DCR_Read" SIGNAME= "__NOC__" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "10" NAME= "DCR_Write" SIGNAME= "__NOC__" />
<PORT DEF_SIGNAME= "plb_v46_0_M_ABus" DIR= "I" MPD_INDEX= "11" NAME= "M_ABus" SIGNAME= "plb_v46_0_M_ABus" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*32)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_UABus" DIR= "I" MPD_INDEX= "12" NAME= "M_UABus" SIGNAME= "plb_v46_0_M_UABus" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*32)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_BE" DIR= "I" MPD_INDEX= "13" NAME= "M_BE" SIGNAME= "plb_v46_0_M_BE" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*(C_PLBV46_DWIDTH/8))-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_RNW" DIR= "I" MPD_INDEX= "14" NAME= "M_RNW" SIGNAME= "plb_v46_0_M_RNW" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_abort" DIR= "I" MPD_INDEX= "15" NAME= "M_abort" SIGNAME= "plb_v46_0_M_abort" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_busLock" DIR= "I" MPD_INDEX= "16" NAME= "M_busLock" SIGNAME= "plb_v46_0_M_busLock" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_TAttribute" DIR= "I" MPD_INDEX= "17" NAME= "M_TAttribute" SIGNAME= "plb_v46_0_M_TAttribute" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*16)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_lockErr" DIR= "I" MPD_INDEX= "18" NAME= "M_lockErr" SIGNAME= "plb_v46_0_M_lockErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_MSize" DIR= "I" MPD_INDEX= "19" NAME= "M_MSize" SIGNAME= "plb_v46_0_M_MSize" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*2)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_priority" DIR= "I" MPD_INDEX= "20" NAME= "M_priority" SIGNAME= "plb_v46_0_M_priority" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*2)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_rdBurst" DIR= "I" MPD_INDEX= "21" NAME= "M_rdBurst" SIGNAME= "plb_v46_0_M_rdBurst" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_request" DIR= "I" MPD_INDEX= "22" NAME= "M_request" SIGNAME= "plb_v46_0_M_request" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_size" DIR= "I" MPD_INDEX= "23" NAME= "M_size" SIGNAME= "plb_v46_0_M_size" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*4)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_type" DIR= "I" MPD_INDEX= "24" NAME= "M_type" SIGNAME= "plb_v46_0_M_type" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*3)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_wrBurst" DIR= "I" MPD_INDEX= "25" NAME= "M_wrBurst" SIGNAME= "plb_v46_0_M_wrBurst" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_M_wrDBus" DIR= "I" MPD_INDEX= "26" NAME= "M_wrDBus" SIGNAME= "plb_v46_0_M_wrDBus" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*C_PLBV46_DWIDTH)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "I" MPD_INDEX= "27" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "I" MPD_INDEX= "28" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_PLBV46_NUM_SLAVES*C_PLBV46_NUM_MASTERS)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "I" MPD_INDEX= "29" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_PLBV46_NUM_SLAVES*C_PLBV46_NUM_MASTERS)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "I" MPD_INDEX= "30" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*C_PLBV46_NUM_MASTERS - 1 ]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "I" MPD_INDEX= "31" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "I" MPD_INDEX= "32" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "I" MPD_INDEX= "33" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "I" MPD_INDEX= "34" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*C_PLBV46_DWIDTH-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "I" MPD_INDEX= "35" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*4-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "I" MPD_INDEX= "36" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "I" MPD_INDEX= "37" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*2-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "I" MPD_INDEX= "38" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "I" MPD_INDEX= "39" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "I" MPD_INDEX= "40" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "I" MPD_INDEX= "41" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "I" MPD_INDEX= "42" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MIRQ" DIR= "O" MPD_INDEX= "43" NAME= "PLB_MIRQ" SIGNAME= "plb_v46_0_PLB_MIRQ" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "O" MPD_INDEX= "44" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "O" MPD_INDEX= "45" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "O" MPD_INDEX= "46" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:(C_PLBV46_DWIDTH/8)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MAddrAck" DIR= "O" MPD_INDEX= "47" NAME= "PLB_MAddrAck" SIGNAME= "plb_v46_0_PLB_MAddrAck" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MTimeout" DIR= "O" MPD_INDEX= "48" NAME= "PLB_MTimeout" SIGNAME= "plb_v46_0_PLB_MTimeout" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MBusy" DIR= "O" MPD_INDEX= "49" NAME= "PLB_MBusy" SIGNAME= "plb_v46_0_PLB_MBusy" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MRdErr" DIR= "O" MPD_INDEX= "50" NAME= "PLB_MRdErr" SIGNAME= "plb_v46_0_PLB_MRdErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MWrErr" DIR= "O" MPD_INDEX= "51" NAME= "PLB_MWrErr" SIGNAME= "plb_v46_0_PLB_MWrErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MRdBTerm" DIR= "O" MPD_INDEX= "52" NAME= "PLB_MRdBTerm" SIGNAME= "plb_v46_0_PLB_MRdBTerm" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MRdDAck" DIR= "O" MPD_INDEX= "53" NAME= "PLB_MRdDAck" SIGNAME= "plb_v46_0_PLB_MRdDAck" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MRdDBus" DIR= "O" MPD_INDEX= "54" NAME= "PLB_MRdDBus" SIGNAME= "plb_v46_0_PLB_MRdDBus" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*C_PLBV46_DWIDTH)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MRdWdAddr" DIR= "O" MPD_INDEX= "55" NAME= "PLB_MRdWdAddr" SIGNAME= "plb_v46_0_PLB_MRdWdAddr" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*4)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MRearbitrate" DIR= "O" MPD_INDEX= "56" NAME= "PLB_MRearbitrate" SIGNAME= "plb_v46_0_PLB_MRearbitrate" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MWrBTerm" DIR= "O" MPD_INDEX= "57" NAME= "PLB_MWrBTerm" SIGNAME= "plb_v46_0_PLB_MWrBTerm" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MWrDAck" DIR= "O" MPD_INDEX= "58" NAME= "PLB_MWrDAck" SIGNAME= "plb_v46_0_PLB_MWrDAck" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MSSize" DIR= "O" MPD_INDEX= "59" NAME= "PLB_MSSize" SIGNAME= "plb_v46_0_PLB_MSSize" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*2)-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "O" MPD_INDEX= "60" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "O" MPD_INDEX= "61" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "O" MPD_INDEX= "62" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "O" MPD_INDEX= "63" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "O" MPD_INDEX= "64" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "O" MPD_INDEX= "65" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "O" MPD_INDEX= "66" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "O" MPD_INDEX= "67" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:C_PLBV46_MID_WIDTH-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "O" MPD_INDEX= "68" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "O" MPD_INDEX= "69" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "O" MPD_INDEX= "70" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "O" MPD_INDEX= "71" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "O" MPD_INDEX= "72" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "O" MPD_INDEX= "73" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "O" MPD_INDEX= "74" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "O" MPD_INDEX= "75" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "O" MPD_INDEX= "76" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "O" MPD_INDEX= "77" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "O" MPD_INDEX= "78" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "O" MPD_INDEX= "79" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:C_PLBV46_DWIDTH-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "O" MPD_INDEX= "80" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SaddrAck" DIR= "O" MPD_INDEX= "81" NAME= "PLB_SaddrAck" SIGNAME= "plb_v46_0_PLB_SaddrAck" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SMRdErr" DIR= "O" MPD_INDEX= "82" NAME= "PLB_SMRdErr" SIGNAME= "plb_v46_0_PLB_SMRdErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SMWrErr" DIR= "O" MPD_INDEX= "83" NAME= "PLB_SMWrErr" SIGNAME= "plb_v46_0_PLB_SMWrErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SMBusy" DIR= "O" MPD_INDEX= "84" NAME= "PLB_SMBusy" SIGNAME= "plb_v46_0_PLB_SMBusy" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SrdBTerm" DIR= "O" MPD_INDEX= "85" NAME= "PLB_SrdBTerm" SIGNAME= "plb_v46_0_PLB_SrdBTerm" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SrdComp" DIR= "O" MPD_INDEX= "86" NAME= "PLB_SrdComp" SIGNAME= "plb_v46_0_PLB_SrdComp" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SrdDAck" DIR= "O" MPD_INDEX= "87" NAME= "PLB_SrdDAck" SIGNAME= "plb_v46_0_PLB_SrdDAck" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SrdDBus" DIR= "O" MPD_INDEX= "88" NAME= "PLB_SrdDBus" SIGNAME= "plb_v46_0_PLB_SrdDBus" VECFORMULA= "[0:C_PLBV46_DWIDTH-1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SrdWdAddr" DIR= "O" MPD_INDEX= "89" NAME= "PLB_SrdWdAddr" SIGNAME= "plb_v46_0_PLB_SrdWdAddr" VECFORMULA= "[0:3]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_Srearbitrate" DIR= "O" MPD_INDEX= "90" NAME= "PLB_Srearbitrate" SIGNAME= "plb_v46_0_PLB_Srearbitrate" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_Sssize" DIR= "O" MPD_INDEX= "91" NAME= "PLB_Sssize" SIGNAME= "plb_v46_0_PLB_Sssize" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_Swait" DIR= "O" MPD_INDEX= "92" NAME= "PLB_Swait" SIGNAME= "plb_v46_0_PLB_Swait" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SwrBTerm" DIR= "O" MPD_INDEX= "93" NAME= "PLB_SwrBTerm" SIGNAME= "plb_v46_0_PLB_SwrBTerm" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SwrComp" DIR= "O" MPD_INDEX= "94" NAME= "PLB_SwrComp" SIGNAME= "plb_v46_0_PLB_SwrComp" />
<PORT DEF_SIGNAME= "plb_v46_0_PLB_SwrDAck" DIR= "O" MPD_INDEX= "95" NAME= "PLB_SwrDAck" SIGNAME= "plb_v46_0_PLB_SwrDAck" />
<PORT DIR= "O" MPD_INDEX= "96" NAME= "Bus_Error_Det" SENSITIVITY= "EDGE_RISING" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "DCR" BUSSTD_PSF= "DCR" IS_VALID= "FALSE" MPD_INDEX= "0" NAME= "SDCR" TYPE= "SLAVE" />
</MODULE>
<MODULE HWVERSION= "1.00.b" INSTANCE= "xps_bram_if_cntlr_1" IPTYPE= "PERIPHERAL" MHS_INDEX= "2" MODCLASS= "MEMORY_CNTLR" MODTYPE= "xps_bram_if_cntlr" >
<DESCRIPTION TYPE= "SHORT" > XPS BRAM Controller</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > Attaches BRAM to the PLBV46</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_bram_if_cntlr_v1_00_b/doc/xps_bram_if_cntlr.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "MEMORY" CHANGEDBY= "USER" MPD_INDEX= "0" NAME= "C_BASEADDR" TYPE= "std_logic_vector" VALUE= "0xffffe000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "MEMORY" CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "2" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "integer" VALUE= "64" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "3" NAME= "C_SPLB_AWIDTH" TYPE= "integer" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "4" NAME= "C_SPLB_DWIDTH" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "5" NAME= "C_SPLB_NUM_MASTERS" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_SPLB_MID_WIDTH" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_SPLB_SUPPORT_BURSTS" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > PLB Slave is Capable of Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_P2P" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "9" NAME= "C_SPLB_SMALLEST_MASTER" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > Smallest Master Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_FAMILY" TYPE= "string" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "4294959104" BASENAME= "C_BASEADDR" BASEVALUE= "0xffffe000" HIGHDECIMAL= "4294967295" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0xffffffff" IS_CACHEABLE= "TRUE" MEMTYPE= "MEMORY" SIZE= "8192" SIZEABRV= "8K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "1" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "2" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "3" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "4" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "5" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "6" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "7" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "8" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:C_SPLB_MID_WIDTH-1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "9" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "10" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "11" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "12" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:(C_SPLB_DWIDTH/8)-1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "13" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "14" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "15" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "16" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "17" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:C_SPLB_DWIDTH-1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "18" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "19" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "20" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "21" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "22" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "23" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "24" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "25" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "26" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "27" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "28" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "29" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "30" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "31" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "32" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "33" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:C_SPLB_DWIDTH-1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "34" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "35" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "36" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "37" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "38" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:C_SPLB_NUM_MASTERS-1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "39" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:C_SPLB_NUM_MASTERS-1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "40" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:C_SPLB_NUM_MASTERS-1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "41" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:C_SPLB_NUM_MASTERS-1]" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Rst" DIR= "O" MPD_INDEX= "42" NAME= "BRAM_Rst" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Rst" />
<PORT BUS= "PORTA" CLKFREQUENCY= "125000000" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Clk" DIR= "O" MPD_INDEX= "43" NAME= "BRAM_Clk" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Clk" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_EN" DIR= "O" MPD_INDEX= "44" NAME= "BRAM_EN" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_EN" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_WEN" DIR= "O" MPD_INDEX= "45" NAME= "BRAM_WEN" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_WEN" VECFORMULA= "[0:(C_SPLB_NATIVE_DWIDTH/8)-1]" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Addr" DIR= "O" MPD_INDEX= "46" NAME= "BRAM_Addr" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Addr" VECFORMULA= "[0:C_SPLB_AWIDTH-1]" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Din" DIR= "I" MPD_INDEX= "47" NAME= "BRAM_Din" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Din" VECFORMULA= "[0:C_SPLB_NATIVE_DWIDTH-1]" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Dout" DIR= "O" MPD_INDEX= "48" NAME= "BRAM_Dout" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Dout" VECFORMULA= "[0:C_SPLB_NATIVE_DWIDTH-1]" />
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
<BUSINTERFACE BUSNAME= "xps_bram_if_cntlr_1_port" BUSSTD= "XIL" BUSSTD_PSF= "XIL_BRAM" IS_INMHS= "TRUE" MPD_INDEX= "1" NAME= "PORTA" TYPE= "INITIATOR" />
</MODULE>
<MODULE HWVERSION= "1.00.a" INSTANCE= "xps_bram_if_cntlr_1_bram" IPTYPE= "PERIPHERAL" MHS_INDEX= "3" MODCLASS= "MEMORY" MODTYPE= "bram_block" >
<DESCRIPTION TYPE= "SHORT" > Block RAM (BRAM) Block</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > The BRAM Block is a configurable memory module that attaches to a variety of BRAM Interface Controllers.</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/bram_block_v1_00_a/doc/bram_block.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "0" NAME= "C_MEMSIZE" TYPE= "integer" VALUE= "0x2000" >
<DESCRIPTION > Size of BRAM(s) in Bytes</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "1" NAME= "C_PORT_DWIDTH" TYPE= "integer" VALUE= "64" >
<DESCRIPTION > Data Width of Port A and B</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_PORT_AWIDTH" TYPE= "integer" VALUE= "32" >
<DESCRIPTION > Address Width of Port A and B</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "3" NAME= "C_NUM_WE" TYPE= "integer" VALUE= "8" >
<DESCRIPTION > Number of Byte Write Enables</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "4" NAME= "C_FAMILY" TYPE= "string" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Rst" DIR= "I" MPD_INDEX= "0" NAME= "BRAM_Rst_A" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Rst" />
<PORT BUS= "PORTA" CLKFREQUENCY= "125000000" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Clk" DIR= "I" MPD_INDEX= "1" NAME= "BRAM_Clk_A" SIGIS= "CLK" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Clk" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_EN" DIR= "I" MPD_INDEX= "2" NAME= "BRAM_EN_A" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_EN" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_WEN" DIR= "I" MPD_INDEX= "3" NAME= "BRAM_WEN_A" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_WEN" VECFORMULA= "[0:C_NUM_WE-1]" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Addr" DIR= "I" MPD_INDEX= "4" NAME= "BRAM_Addr_A" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Addr" VECFORMULA= "[0:C_PORT_AWIDTH-1]" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Din" DIR= "O" MPD_INDEX= "5" NAME= "BRAM_Din_A" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Din" VECFORMULA= "[0:C_PORT_DWIDTH-1]" />
<PORT BUS= "PORTA" DEF_SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Dout" DIR= "I" MPD_INDEX= "6" NAME= "BRAM_Dout_A" SIGNAME= "xps_bram_if_cntlr_1_port_BRAM_Dout" VECFORMULA= "[0:C_PORT_DWIDTH-1]" />
<PORT BUS= "PORTB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "7" NAME= "BRAM_Rst_B" SIGNAME= "__NOC__" />
<PORT BUS= "PORTB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "8" NAME= "BRAM_Clk_B" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT BUS= "PORTB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "9" NAME= "BRAM_EN_B" SIGNAME= "__NOC__" />
<PORT BUS= "PORTB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "10" NAME= "BRAM_WEN_B" SIGNAME= "__NOC__" VECFORMULA= "[0:C_NUM_WE-1]" />
<PORT BUS= "PORTB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "11" NAME= "BRAM_Addr_B" SIGNAME= "__NOC__" VECFORMULA= "[0:C_PORT_AWIDTH-1]" />
<PORT BUS= "PORTB" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "12" NAME= "BRAM_Din_B" SIGNAME= "__NOC__" VECFORMULA= "[0:C_PORT_DWIDTH-1]" />
<PORT BUS= "PORTB" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "13" NAME= "BRAM_Dout_B" SIGNAME= "__NOC__" VECFORMULA= "[0:C_PORT_DWIDTH-1]" />
<BUSINTERFACE BUSNAME= "xps_bram_if_cntlr_1_port" BUSSTD= "XIL" BUSSTD_PSF= "XIL_BRAM" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "PORTA" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_BRAM" MPD_INDEX= "1" NAME= "PORTB" TYPE= "TARGET" />
</MODULE>
<MODULE HWVERSION= "1.01.a" INSTANCE= "RS232_Uart_1" IPTYPE= "PERIPHERAL" MHS_INDEX= "4" MODCLASS= "PERIPHERAL" MODTYPE= "xps_uartlite" >
<DESCRIPTION TYPE= "SHORT" > XPS UART (Lite)</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > Generic UART (Universal Asynchronous Receiver/Transmitter) for PLBV46 bus.</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_uartlite_v1_01_a/doc/xps_uartlite.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER MPD_INDEX= "0" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "1" NAME= "C_SPLB_CLK_FREQ_HZ" TYPE= "INTEGER" VALUE= "125000000" >
<DESCRIPTION > Clock Frequency of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "2" NAME= "C_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x84000000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "3" NAME= "C_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x8400ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "5" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_SPLB_SUPPORT_BURSTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave is Capable of Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_BAUDRATE" TYPE= "INTEGER" VALUE= "9600" >
<DESCRIPTION > UART Lite Baud Rate </DESCRIPTION>
<DESCRIPTION > Baud Rate</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "12" NAME= "C_DATA_BITS" TYPE= "INTEGER" VALUE= "8" >
<DESCRIPTION > Number of Data Bits in a Serial Frame</DESCRIPTION>
<DESCRIPTION > Data Bits</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "13" NAME= "C_USE_PARITY" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Use Parity </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "14" NAME= "C_ODD_PARITY" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Parity Type </DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2214592512" BASENAME= "C_BASEADDR" BASEVALUE= "0x84000000" HIGHDECIMAL= "2214658047" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8400ffff" MEMTYPE= "REGISTER" MINSIZE= "0x10" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "42" NAME= "RX" SIGNAME= "fpga_0_RS232_Uart_1_RX_pin" >
<DESCRIPTION > Serial Data In</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "43" NAME= "TX" SIGNAME= "fpga_0_RS232_Uart_1_TX_pin" >
<DESCRIPTION > Serial Data Out</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "2" MPD_INDEX= "44" NAME= "Interrupt" SENSITIVITY= "EDGE_RISING" SIGIS= "INTERRUPT" SIGNAME= "RS232_Uart_1_Interrupt" />
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "1" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "2" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "3" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "4" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "5" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "6" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "7" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "8" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "9" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "10" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "11" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "12" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "13" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "14" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "15" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "16" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "17" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "18" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "19" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "20" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "21" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "22" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "23" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "24" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "25" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "26" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "27" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "28" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "29" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "30" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "31" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "32" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "33" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "34" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "35" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "36" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "37" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "38" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "39" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "40" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "41" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
<INTERRUPTINFO TYPE= "SOURCE" >
<TARGET INTC_INDEX= "0" PRIORITY= "1" />
</INTERRUPTINFO>
</MODULE>
<MODULE HWVERSION= "2.00.a" INSTANCE= "LEDs_8Bit" IPTYPE= "PERIPHERAL" MHS_INDEX= "5" MODCLASS= "PERIPHERAL" MODTYPE= "xps_gpio" >
<DESCRIPTION TYPE= "SHORT" > XPS General Purpose IO</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > General Purpose Input/Output (GPIO) core for the PLBV46 bus.</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_gpio_v2_00_a/doc/xps_gpio.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "0" NAME= "C_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x81440000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x8144ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "3" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_SUPPORT_BURSTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave is Capable of Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_ALL_INPUTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Channel 1 is Input Only </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_ALL_INPUTS_2" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Channel 2 is Input Only </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "12" NAME= "C_GPIO_WIDTH" TYPE= "INTEGER" VALUE= "8" >
<DESCRIPTION > GPIO Data Channel Width</DESCRIPTION>
<DESCRIPTION > GPIO Data Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_GPIO2_WIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > GPIO2 Data Channel Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "14" NAME= "C_INTERRUPT_PRESENT" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > GPIO Supports Interrupts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "15" NAME= "C_DOUT_DEFAULT" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Channel 1 Data Out Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "16" NAME= "C_TRI_DEFAULT" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Channel 1 Tri-state Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "17" NAME= "C_IS_DUAL" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Enable Channel 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "18" NAME= "C_DOUT_DEFAULT_2" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Channel 2 Data Out Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "19" NAME= "C_TRI_DEFAULT_2" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Channel 2 Tri-state Default Value </DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2168717312" BASENAME= "C_BASEADDR" BASEVALUE= "0x81440000" HIGHDECIMAL= "2168782847" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8144ffff" MEMTYPE= "REGISTER" MINSIZE= "0x200" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "IO" ENDIAN= "BIG" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "0" MPD_INDEX= "49" MSB= "7" NAME= "GPIO_IO" SIGNAME= "fpga_0_LEDs_8Bit_GPIO_IO_pin" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" >
<DESCRIPTION > GPIO1 Data IO</DESCRIPTION>
</PORT>
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "1" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "2" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "3" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "4" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "5" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "6" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "7" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "8" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "9" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "10" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "11" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "12" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "13" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "14" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "15" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "16" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "17" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "18" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "19" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "20" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "21" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "22" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "23" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "24" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "25" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "26" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "27" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "28" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "29" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "30" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "31" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "32" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "33" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "34" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "35" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "36" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "37" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "38" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "39" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "40" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "41" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "42" NAME= "IP2INTC_Irpt" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "43" NAME= "GPIO_IO_I" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "44" NAME= "GPIO_IO_O" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "45" NAME= "GPIO_IO_T" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "46" NAME= "GPIO2_IO_I" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "47" NAME= "GPIO2_IO_O" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "48" NAME= "GPIO2_IO_T" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "IO" IS_VALID= "FALSE" MPD_INDEX= "50" NAME= "GPIO2_IO" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" >
<DESCRIPTION > GPIO2 Data IO</DESCRIPTION>
</PORT>
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
</MODULE>
<MODULE HWVERSION= "2.00.a" INSTANCE= "LEDs_Positions" IPTYPE= "PERIPHERAL" MHS_INDEX= "6" MODCLASS= "PERIPHERAL" MODTYPE= "xps_gpio" >
<DESCRIPTION TYPE= "SHORT" > XPS General Purpose IO</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > General Purpose Input/Output (GPIO) core for the PLBV46 bus.</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_gpio_v2_00_a/doc/xps_gpio.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "0" NAME= "C_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x81420000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x8142ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "3" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_SUPPORT_BURSTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave is Capable of Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_ALL_INPUTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Channel 1 is Input Only </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_ALL_INPUTS_2" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Channel 2 is Input Only </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "12" NAME= "C_GPIO_WIDTH" TYPE= "INTEGER" VALUE= "5" >
<DESCRIPTION > GPIO Data Channel Width</DESCRIPTION>
<DESCRIPTION > GPIO Data Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_GPIO2_WIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > GPIO2 Data Channel Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "14" NAME= "C_INTERRUPT_PRESENT" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > GPIO Supports Interrupts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "15" NAME= "C_DOUT_DEFAULT" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Channel 1 Data Out Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "16" NAME= "C_TRI_DEFAULT" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Channel 1 Tri-state Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "17" NAME= "C_IS_DUAL" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Enable Channel 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "18" NAME= "C_DOUT_DEFAULT_2" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Channel 2 Data Out Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "19" NAME= "C_TRI_DEFAULT_2" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Channel 2 Tri-state Default Value </DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2168586240" BASENAME= "C_BASEADDR" BASEVALUE= "0x81420000" HIGHDECIMAL= "2168651775" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8142ffff" MEMTYPE= "REGISTER" MINSIZE= "0x200" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "IO" ENDIAN= "BIG" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "0" MPD_INDEX= "49" MSB= "4" NAME= "GPIO_IO" SIGNAME= "fpga_0_LEDs_Positions_GPIO_IO_pin" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" >
<DESCRIPTION > GPIO1 Data IO</DESCRIPTION>
</PORT>
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "1" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "2" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "3" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "4" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "5" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "6" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "7" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "8" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "9" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "10" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "11" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "12" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "13" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "14" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "15" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "16" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "17" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "18" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "19" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "20" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "21" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "22" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "23" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "24" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "25" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "26" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "27" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "28" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "29" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "30" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "31" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "32" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "33" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "34" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "35" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "36" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "37" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "38" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "39" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "40" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "41" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "42" NAME= "IP2INTC_Irpt" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "43" NAME= "GPIO_IO_I" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "44" NAME= "GPIO_IO_O" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "45" NAME= "GPIO_IO_T" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "46" NAME= "GPIO2_IO_I" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "47" NAME= "GPIO2_IO_O" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "48" NAME= "GPIO2_IO_T" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "IO" IS_VALID= "FALSE" MPD_INDEX= "50" NAME= "GPIO2_IO" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" >
<DESCRIPTION > GPIO2 Data IO</DESCRIPTION>
</PORT>
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
</MODULE>
<MODULE HWVERSION= "2.00.a" INSTANCE= "Push_Buttons_5Bit" IPTYPE= "PERIPHERAL" MHS_INDEX= "7" MODCLASS= "PERIPHERAL" MODTYPE= "xps_gpio" >
<DESCRIPTION TYPE= "SHORT" > XPS General Purpose IO</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > General Purpose Input/Output (GPIO) core for the PLBV46 bus.</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_gpio_v2_00_a/doc/xps_gpio.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "0" NAME= "C_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x81400000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x8140ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "3" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_SUPPORT_BURSTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave is Capable of Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "10" NAME= "C_ALL_INPUTS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Channel 1 is Input Only </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_ALL_INPUTS_2" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Channel 2 is Input Only </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "12" NAME= "C_GPIO_WIDTH" TYPE= "INTEGER" VALUE= "5" >
<DESCRIPTION > GPIO Data Channel Width</DESCRIPTION>
<DESCRIPTION > GPIO Data Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_GPIO2_WIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > GPIO2 Data Channel Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "14" NAME= "C_INTERRUPT_PRESENT" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > GPIO Supports Interrupts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "15" NAME= "C_DOUT_DEFAULT" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Channel 1 Data Out Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "16" NAME= "C_TRI_DEFAULT" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Channel 1 Tri-state Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "17" NAME= "C_IS_DUAL" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Enable Channel 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "18" NAME= "C_DOUT_DEFAULT_2" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Channel 2 Data Out Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "19" NAME= "C_TRI_DEFAULT_2" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Channel 2 Tri-state Default Value </DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2168455168" BASENAME= "C_BASEADDR" BASEVALUE= "0x81400000" HIGHDECIMAL= "2168520703" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8140ffff" MEMTYPE= "REGISTER" MINSIZE= "0x200" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "IO" ENDIAN= "BIG" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "0" MPD_INDEX= "49" MSB= "4" NAME= "GPIO_IO" SIGNAME= "fpga_0_Push_Buttons_5Bit_GPIO_IO_pin" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" >
<DESCRIPTION > GPIO1 Data IO</DESCRIPTION>
</PORT>
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "1" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "2" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "3" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "4" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "5" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "6" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "7" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "8" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "9" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "10" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "11" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "12" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "13" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "14" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "15" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "16" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "17" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "18" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "19" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "20" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "21" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "22" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "23" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "24" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "25" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "26" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "27" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "28" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "29" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "30" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "31" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "32" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "33" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "34" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "35" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "36" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "37" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "38" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "39" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "40" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "41" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "42" NAME= "IP2INTC_Irpt" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "43" NAME= "GPIO_IO_I" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "44" NAME= "GPIO_IO_O" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "45" NAME= "GPIO_IO_T" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "46" NAME= "GPIO2_IO_I" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "47" NAME= "GPIO2_IO_O" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "48" NAME= "GPIO2_IO_T" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "IO" IS_VALID= "FALSE" MPD_INDEX= "50" NAME= "GPIO2_IO" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" >
<DESCRIPTION > GPIO2 Data IO</DESCRIPTION>
</PORT>
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
</MODULE>
<MODULE HWVERSION= "2.00.a" INSTANCE= "DIP_Switches_8Bit" IPTYPE= "PERIPHERAL" MHS_INDEX= "8" MODCLASS= "PERIPHERAL" MODTYPE= "xps_gpio" >
<DESCRIPTION TYPE= "SHORT" > XPS General Purpose IO</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > General Purpose Input/Output (GPIO) core for the PLBV46 bus.</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_gpio_v2_00_a/doc/xps_gpio.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "0" NAME= "C_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x81460000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x8146ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "3" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_SUPPORT_BURSTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave is Capable of Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "10" NAME= "C_ALL_INPUTS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Channel 1 is Input Only </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_ALL_INPUTS_2" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Channel 2 is Input Only </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "12" NAME= "C_GPIO_WIDTH" TYPE= "INTEGER" VALUE= "8" >
<DESCRIPTION > GPIO Data Channel Width</DESCRIPTION>
<DESCRIPTION > GPIO Data Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_GPIO2_WIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > GPIO2 Data Channel Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "14" NAME= "C_INTERRUPT_PRESENT" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > GPIO Supports Interrupts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "15" NAME= "C_DOUT_DEFAULT" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Channel 1 Data Out Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "16" NAME= "C_TRI_DEFAULT" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Channel 1 Tri-state Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "17" NAME= "C_IS_DUAL" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Enable Channel 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "18" NAME= "C_DOUT_DEFAULT_2" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Channel 2 Data Out Default Value </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "19" NAME= "C_TRI_DEFAULT_2" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Channel 2 Tri-state Default Value </DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2168848384" BASENAME= "C_BASEADDR" BASEVALUE= "0x81460000" HIGHDECIMAL= "2168913919" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8146ffff" MEMTYPE= "REGISTER" MINSIZE= "0x200" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "IO" ENDIAN= "BIG" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "0" MPD_INDEX= "49" MSB= "7" NAME= "GPIO_IO" SIGNAME= "fpga_0_DIP_Switches_8Bit_GPIO_IO_pin" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" >
<DESCRIPTION > GPIO1 Data IO</DESCRIPTION>
</PORT>
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "1" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "2" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "3" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "4" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "5" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "6" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "7" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "8" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "9" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "10" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "11" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "12" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "13" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "14" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "15" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "16" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "17" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "18" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "19" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "20" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "21" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "22" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "23" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "24" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "25" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "26" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "27" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "28" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "29" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "30" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "31" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "32" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "33" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "34" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "35" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "36" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "37" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "38" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "39" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "40" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "41" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "42" NAME= "IP2INTC_Irpt" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "43" NAME= "GPIO_IO_I" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "44" NAME= "GPIO_IO_O" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "45" NAME= "GPIO_IO_T" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO_WIDTH-1)]" />
<PORT DIR= "I" IS_VALID= "FALSE" MPD_INDEX= "46" NAME= "GPIO2_IO_I" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "47" NAME= "GPIO2_IO_O" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "48" NAME= "GPIO2_IO_T" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" />
<PORT DIR= "IO" IS_VALID= "FALSE" MPD_INDEX= "50" NAME= "GPIO2_IO" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_GPIO2_WIDTH-1)]" >
<DESCRIPTION > GPIO2 Data IO</DESCRIPTION>
</PORT>
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
</MODULE>
<MODULE HWVERSION= "2.01.a" INSTANCE= "IIC_EEPROM" IPTYPE= "PERIPHERAL" MHS_INDEX= "9" MODCLASS= "PERIPHERAL" MODTYPE= "xps_iic" >
<DESCRIPTION TYPE= "SHORT" > XPS IIC Interface</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > PLBV46 interface to Philips I2C bus v2.1</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_iic_v2_01_a/doc/xps_iic.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER MPD_INDEX= "0" NAME= "C_IIC_FREQ" TYPE= "INTEGER" VALUE= "100000" >
<DESCRIPTION > Output Frequency of SCL Signal</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "1" NAME= "C_TEN_BIT_ADR" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Use 10-bit Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_GPO_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Width of GPIO</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "3" NAME= "C_CLK_FREQ" TYPE= "INTEGER" VALUE= "125000000" >
<DESCRIPTION > PLBv46 Bus Clock Frequency</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_SCL_INERTIAL_DELAY" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Width of glitches removed on SCL input</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_SDA_INERTIAL_DELAY" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Width of glitches removed on SDA input</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "6" NAME= "C_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x81600000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "7" NAME= "C_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x8160ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "11" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "12" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2170552320" BASENAME= "C_BASEADDR" BASEVALUE= "0x81600000" HIGHDECIMAL= "2170617855" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8160ffff" MEMTYPE= "REGISTER" MINSIZE= "0x00200" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "IO" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "50" NAME= "Sda" SIGNAME= "fpga_0_IIC_EEPROM_Sda_pin" >
<DESCRIPTION > IIC Serial Data</DESCRIPTION>
</PORT>
<PORT DIR= "IO" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "51" NAME= "Scl" SIGNAME= "fpga_0_IIC_EEPROM_Scl_pin" >
<DESCRIPTION > IIC Serial Clock</DESCRIPTION>
</PORT>
<PORT DIR= "I" MPD_INDEX= "0" NAME= "Sda_I" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "1" NAME= "Sda_O" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "2" NAME= "Sda_T" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "3" NAME= "Scl_I" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "4" NAME= "Scl_O" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "5" NAME= "Scl_T" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "6" NAME= "Gpo" SIGNAME= "__NOC__" VECFORMULA= "[(32-C_GPO_WIDTH):(32-1)]" >
<DESCRIPTION > IIC General Purpose Output</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "7" NAME= "IIC2INTC_Irpt" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "8" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "9" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "10" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "11" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "12" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "13" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "14" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "15" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "16" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "17" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "18" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "19" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "20" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "21" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "22" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "23" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "24" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "25" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "26" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "27" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "28" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "29" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "30" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "31" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "32" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "33" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "34" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "35" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "36" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "37" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "38" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "39" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "40" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "41" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "42" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "43" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "44" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "45" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "46" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "47" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "48" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "49" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
</MODULE>
<MODULE HWVERSION= "3.00.a" INSTANCE= "SRAM" IPTYPE= "PERIPHERAL" MHS_INDEX= "10" MODCLASS= "MEMORY_CNTLR" MODTYPE= "xps_mch_emc" >
<DESCRIPTION TYPE= "SHORT" > XPS Multi-Channel External Memory Controller(SRAM/Flash)</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > Xilinx Multi-CHannel (MCH) PLBV46 external memory controller</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_mch_emc_v3_00_a/doc/xps_mch_emc.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER MPD_INDEX= "0" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "1" NAME= "C_NUM_BANKS_MEM" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of Memory Banks </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "2" NAME= "C_NUM_CHANNELS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Number of MCH Channels </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "3" NAME= "C_PRIORITY_MODE" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Arbitration Mode Between PLB and MCH Interface </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_INCLUDE_PLB_IPIF" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Include PLB Slave Interface </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_INCLUDE_WRBUF" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Include Write Buffer</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "9" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_MCH_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > MCH and PLB Address Bus Width </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "11" NAME= "C_SPLB_SMALLEST_MASTER" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > Smallest Master Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "12" NAME= "C_MCH_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Data Bus Width of MCH</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "13" NAME= "C_MCH_SPLB_CLK_PERIOD_PS" TYPE= "INTEGER" VALUE= "8000" >
<DESCRIPTION > MCH and PLB Clock Period </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "MEMORY" CHANGEDBY= "USER" MPD_INDEX= "14" NAME= "C_MEM0_BASEADDR" TYPE= "std_logic_vector" VALUE= "0xf8000000" >
<DESCRIPTION > Base Address of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "MEMORY" CHANGEDBY= "USER" MPD_INDEX= "15" NAME= "C_MEM0_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0xf80fffff" >
<DESCRIPTION > High Address of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "MEMORY" MPD_INDEX= "16" NAME= "C_MEM1_BASEADDR" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Base Address of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "MEMORY" MPD_INDEX= "17" NAME= "C_MEM1_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > High Address of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "MEMORY" MPD_INDEX= "18" NAME= "C_MEM2_BASEADDR" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Base Address of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "MEMORY" MPD_INDEX= "19" NAME= "C_MEM2_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > High Address of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "MEMORY" MPD_INDEX= "20" NAME= "C_MEM3_BASEADDR" TYPE= "std_logic_vector" VALUE= "0xffffffff" >
<DESCRIPTION > Base Address of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "MEMORY" MPD_INDEX= "21" NAME= "C_MEM3_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > High Address of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "22" NAME= "C_PAGEMODE_FLASH_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Page mode flash enable of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "23" NAME= "C_PAGEMODE_FLASH_1" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Page mode flash enable of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "24" NAME= "C_PAGEMODE_FLASH_2" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Page mode flash enable of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "25" NAME= "C_PAGEMODE_FLASH_3" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Page mode flash enable of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "26" NAME= "C_INCLUDE_NEGEDGE_IOREGS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Use Falling Edge IO Register in Interface Signals </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "27" NAME= "C_MEM0_WIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Data Bus Width of Bank 0 </DESCRIPTION>
<DESCRIPTION > Data Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "28" NAME= "C_MEM1_WIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Data Bus Width of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "29" NAME= "C_MEM2_WIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Data Bus Width of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "30" NAME= "C_MEM3_WIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Data Bus Width of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "31" NAME= "C_MAX_MEM_WIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Maximum Data Bus Width </DESCRIPTION>
<DESCRIPTION > Maximum Data Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "32" NAME= "C_INCLUDE_DATAWIDTH_MATCHING_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Execute Multiple Memory Accesses To Match Bank 0 Data Bus Width To PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "33" NAME= "C_INCLUDE_DATAWIDTH_MATCHING_1" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Execute Multiple Memory Accesses To Match Bank 1 Data Bus Width To PLB Data Bus Width </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "34" NAME= "C_INCLUDE_DATAWIDTH_MATCHING_2" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Execute Multiple Memory Accesses To Match Bank 2 Data Bus Width To PLB Data Bus Width </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "35" NAME= "C_INCLUDE_DATAWIDTH_MATCHING_3" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Execute Multiple Memory Accesses To Match Bank 3 Data Bus Width To PLB Data Bus Width </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "36" NAME= "C_SYNCH_MEM_0" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Bank 0 is Synchronous </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "37" NAME= "C_SYNCH_PIPEDELAY_0" TYPE= "INTEGER" VALUE= "2" >
<DESCRIPTION > Pipeline Latency of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "38" NAME= "C_TCEDV_PS_MEM_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > TCEDV of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "39" NAME= "C_TAVDV_PS_MEM_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > TAVDV of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "40" NAME= "C_TPACC_PS_FLASH_0" TYPE= "INTEGER" VALUE= "25000" >
<DESCRIPTION > TPACC of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "41" NAME= "C_THZCE_PS_MEM_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > THZCE of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "42" NAME= "C_THZOE_PS_MEM_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > THZOE of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "43" NAME= "C_TWC_PS_MEM_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > TWC of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "44" NAME= "C_TWP_PS_MEM_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > TWP of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "45" NAME= "C_TLZWE_PS_MEM_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > TLZWE of Bank 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "46" NAME= "C_SYNCH_MEM_1" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Bank 1 is Synchronous </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "47" NAME= "C_SYNCH_PIPEDELAY_1" TYPE= "INTEGER" VALUE= "2" >
<DESCRIPTION > Pipeline Latency of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "48" NAME= "C_TCEDV_PS_MEM_1" TYPE= "INTEGER" VALUE= "15000" >
<DESCRIPTION > TCEDV of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "49" NAME= "C_TAVDV_PS_MEM_1" TYPE= "INTEGER" VALUE= "15000" >
<DESCRIPTION > TAVDV of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "50" NAME= "C_TPACC_PS_FLASH_1" TYPE= "INTEGER" VALUE= "25000" >
<DESCRIPTION > TPACC of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "51" NAME= "C_THZCE_PS_MEM_1" TYPE= "INTEGER" VALUE= "7000" >
<DESCRIPTION > THZCE of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "52" NAME= "C_THZOE_PS_MEM_1" TYPE= "INTEGER" VALUE= "7000" >
<DESCRIPTION > THZOE of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "53" NAME= "C_TWC_PS_MEM_1" TYPE= "INTEGER" VALUE= "15000" >
<DESCRIPTION > TWC of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "54" NAME= "C_TWP_PS_MEM_1" TYPE= "INTEGER" VALUE= "12000" >
<DESCRIPTION > TWP of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "55" NAME= "C_TLZWE_PS_MEM_1" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > TLZWE of Bank 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "56" NAME= "C_SYNCH_MEM_2" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Bank 2 is Synchronous </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "57" NAME= "C_SYNCH_PIPEDELAY_2" TYPE= "INTEGER" VALUE= "2" >
<DESCRIPTION > Pipeline Latency of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "58" NAME= "C_TCEDV_PS_MEM_2" TYPE= "INTEGER" VALUE= "15000" >
<DESCRIPTION > TCEDV of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "59" NAME= "C_TAVDV_PS_MEM_2" TYPE= "INTEGER" VALUE= "15000" >
<DESCRIPTION > TAVDV of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "60" NAME= "C_TPACC_PS_FLASH_2" TYPE= "INTEGER" VALUE= "25000" >
<DESCRIPTION > TPACC of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "61" NAME= "C_THZCE_PS_MEM_2" TYPE= "INTEGER" VALUE= "7000" >
<DESCRIPTION > THZCE of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "62" NAME= "C_THZOE_PS_MEM_2" TYPE= "INTEGER" VALUE= "7000" >
<DESCRIPTION > THZOE of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "63" NAME= "C_TWC_PS_MEM_2" TYPE= "INTEGER" VALUE= "15000" >
<DESCRIPTION > TWC of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "64" NAME= "C_TWP_PS_MEM_2" TYPE= "INTEGER" VALUE= "12000" >
<DESCRIPTION > TWP of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "65" NAME= "C_TLZWE_PS_MEM_2" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > TLZWE of Bank 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "66" NAME= "C_SYNCH_MEM_3" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Bank 3 is Synchronous </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "67" NAME= "C_SYNCH_PIPEDELAY_3" TYPE= "INTEGER" VALUE= "2" >
<DESCRIPTION > Pipeline Latency of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "68" NAME= "C_TCEDV_PS_MEM_3" TYPE= "INTEGER" VALUE= "15000" >
<DESCRIPTION > TCEDV of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "69" NAME= "C_TAVDV_PS_MEM_3" TYPE= "INTEGER" VALUE= "15000" >
<DESCRIPTION > TAVDV of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "70" NAME= "C_TPACC_PS_FLASH_3" TYPE= "INTEGER" VALUE= "25000" >
<DESCRIPTION > TPACC of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "71" NAME= "C_THZCE_PS_MEM_3" TYPE= "INTEGER" VALUE= "7000" >
<DESCRIPTION > THZCE of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "72" NAME= "C_THZOE_PS_MEM_3" TYPE= "INTEGER" VALUE= "7000" >
<DESCRIPTION > THZOE of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "73" NAME= "C_TWC_PS_MEM_3" TYPE= "INTEGER" VALUE= "15000" >
<DESCRIPTION > TWC of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "74" NAME= "C_TWP_PS_MEM_3" TYPE= "INTEGER" VALUE= "12000" >
<DESCRIPTION > TWP of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "75" NAME= "C_TLZWE_PS_MEM_3" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > TLZWE of Bank 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "76" NAME= "C_MCH0_PROTOCOL" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Interface Protocol of Ch 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "77" NAME= "C_MCH0_ACCESSBUF_DEPTH" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Depth of Access Buffer of Ch 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "78" NAME= "C_MCH0_RDDATABUF_DEPTH" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Depth of Read Data Buffer Depath of Ch 0 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "79" NAME= "C_MCH1_PROTOCOL" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Interface Protocol of Ch 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "80" NAME= "C_MCH1_ACCESSBUF_DEPTH" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Depth of Access Buffer of Ch 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "81" NAME= "C_MCH1_RDDATABUF_DEPTH" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Depth of Read Data Buffer of Ch 1 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "82" NAME= "C_MCH2_PROTOCOL" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Interface Protocol of Ch 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "83" NAME= "C_MCH2_ACCESSBUF_DEPTH" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Depth of Access Buffer of Ch 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "84" NAME= "C_MCH2_RDDATABUF_DEPTH" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Depth of Read Data Buffer of Ch 2 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "85" NAME= "C_MCH3_PROTOCOL" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Interface Protocol of Ch 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "86" NAME= "C_MCH3_ACCESSBUF_DEPTH" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Depth of Access Buffer of Ch 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "87" NAME= "C_MCH3_RDDATABUF_DEPTH" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Depth of Read Data Buffer of Ch 3 </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "88" NAME= "C_XCL0_LINESIZE" TYPE= "INTEGER" VALUE= "4" >
<DESCRIPTION > Cacheline Size of Ch0</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "89" NAME= "C_XCL0_WRITEXFER" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Write Transfer Type of Ch0</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "90" NAME= "C_XCL1_LINESIZE" TYPE= "INTEGER" VALUE= "4" >
<DESCRIPTION > Cacheline Size of Ch1</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "91" NAME= "C_XCL1_WRITEXFER" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Write Transfer Type of Ch1</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "92" NAME= "C_XCL2_LINESIZE" TYPE= "INTEGER" VALUE= "4" >
<DESCRIPTION > Cacheline Size of Ch2</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "93" NAME= "C_XCL2_WRITEXFER" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Write Transfer Type of Ch2</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "94" NAME= "C_XCL3_LINESIZE" TYPE= "INTEGER" VALUE= "4" >
<DESCRIPTION > Cacheline Size of Ch3</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "95" NAME= "C_XCL3_WRITEXFER" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Write Transfer Type of Ch3</DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "4160749568" BASENAME= "C_MEM0_BASEADDR" BASEVALUE= "0xf8000000" HIGHDECIMAL= "4161798143" HIGHNAME= "C_MEM0_HIGHADDR" HIGHVALUE= "0xf80fffff" IS_CACHEABLE= "TRUE" MEMTYPE= "MEMORY" SIZE= "1048576" SIZEABRV= "1M" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
<BUSINTERFACE NAME= "MCH0" />
<BUSINTERFACE NAME= "MCH1" />
<BUSINTERFACE NAME= "MCH2" />
<BUSINTERFACE NAME= "MCH3" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_MEM1_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_MEM1_HIGHADDR" HIGHVALUE= "0x00000000" IS_CACHEABLE= "TRUE" IS_VALID= "FALSE" MEMTYPE= "MEMORY" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
<BUSINTERFACE NAME= "MCH0" />
<BUSINTERFACE NAME= "MCH1" />
<BUSINTERFACE NAME= "MCH2" />
<BUSINTERFACE NAME= "MCH3" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_MEM2_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_MEM2_HIGHADDR" HIGHVALUE= "0x00000000" IS_CACHEABLE= "TRUE" IS_VALID= "FALSE" MEMTYPE= "MEMORY" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
<BUSINTERFACE NAME= "MCH0" />
<BUSINTERFACE NAME= "MCH1" />
<BUSINTERFACE NAME= "MCH2" />
<BUSINTERFACE NAME= "MCH3" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_MEM3_BASEADDR" BASEVALUE= "0xffffffff" HIGHDECIMAL= "0" HIGHNAME= "C_MEM3_HIGHADDR" HIGHVALUE= "0x00000000" IS_CACHEABLE= "TRUE" IS_VALID= "FALSE" MEMTYPE= "MEMORY" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
<BUSINTERFACE NAME= "MCH0" />
<BUSINTERFACE NAME= "MCH1" />
<BUSINTERFACE NAME= "MCH2" />
<BUSINTERFACE NAME= "MCH3" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "1" NAME= "RdClk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT DIR= "O" ENDIAN= "BIG" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "1" MPD_INDEX= "78" MSB= "31" NAME= "Mem_A" SIGNAME= "0b0000000 & fpga_0_SRAM_Mem_A_pin_vslice_7_30_concat & 0b0" VECFORMULA= "[0:(C_MCH_SPLB_AWIDTH-1)]" >
<DESCRIPTION > Memory Address Bus</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "2" MPD_INDEX= "80" NAME= "Mem_CEN" SIGNAME= "fpga_0_SRAM_Mem_CEN_pin" VECFORMULA= "[0:(C_NUM_BANKS_MEM-1)]" >
<DESCRIPTION > Memory Chip Enable Active Low</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "3" MPD_INDEX= "81" NAME= "Mem_OEN" SIGNAME= "fpga_0_SRAM_Mem_OEN_pin" VECFORMULA= "[0:(C_NUM_BANKS_MEM-1)]" >
<DESCRIPTION > Memory Output Enable</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "4" MPD_INDEX= "82" NAME= "Mem_WEN" SIGNAME= "fpga_0_SRAM_Mem_WEN_pin" >
<DESCRIPTION > Memory Write Enable</DESCRIPTION>
</PORT>
<PORT DIR= "O" ENDIAN= "BIG" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "5" MPD_INDEX= "84" MSB= "3" NAME= "Mem_BEN" SIGNAME= "fpga_0_SRAM_Mem_BEN_pin" VECFORMULA= "[0:((C_MAX_MEM_WIDTH/8)-1)]" >
<DESCRIPTION > Memory Byte Enable</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "6" MPD_INDEX= "86" NAME= "Mem_ADV_LDN" SIGNAME= "fpga_0_SRAM_Mem_ADV_LDN_pin" >
<DESCRIPTION > Memory Advanced Burst Address/Load New Address</DESCRIPTION>
</PORT>
<PORT DIR= "IO" ENDIAN= "BIG" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "7" MPD_INDEX= "90" MSB= "31" NAME= "Mem_DQ" SIGNAME= "fpga_0_SRAM_Mem_DQ_pin" VECFORMULA= "[0:(C_MAX_MEM_WIDTH-1)]" >
<DESCRIPTION > Memory Data Bus</DESCRIPTION>
</PORT>
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "MCH_SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "2" NAME= "MCH_SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "MCH0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "3" NAME= "MCH0_Access_Control" SIGNAME= "__NOC__" />
<PORT BUS= "MCH0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "4" NAME= "MCH0_Access_Data" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MCH_NATIVE_DWIDTH-1)]" />
<PORT BUS= "MCH0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "5" NAME= "MCH0_Access_Write" SIGNAME= "__NOC__" />
<PORT BUS= "MCH0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "6" NAME= "MCH0_Access_Full" SIGNAME= "__NOC__" />
<PORT BUS= "MCH0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "7" NAME= "MCH0_ReadData_Control" SIGNAME= "__NOC__" />
<PORT BUS= "MCH0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "8" NAME= "MCH0_ReadData_Data" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MCH_NATIVE_DWIDTH-1)]" />
<PORT BUS= "MCH0" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "9" NAME= "MCH0_ReadData_Read" SIGNAME= "__NOC__" />
<PORT BUS= "MCH0" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "10" NAME= "MCH0_ReadData_Exists" SIGNAME= "__NOC__" />
<PORT BUS= "MCH1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "11" NAME= "MCH1_Access_Control" SIGNAME= "__NOC__" />
<PORT BUS= "MCH1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "12" NAME= "MCH1_Access_Data" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MCH_NATIVE_DWIDTH-1)]" />
<PORT BUS= "MCH1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "13" NAME= "MCH1_Access_Write" SIGNAME= "__NOC__" />
<PORT BUS= "MCH1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "14" NAME= "MCH1_Access_Full" SIGNAME= "__NOC__" />
<PORT BUS= "MCH1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "15" NAME= "MCH1_ReadData_Control" SIGNAME= "__NOC__" />
<PORT BUS= "MCH1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "16" NAME= "MCH1_ReadData_Data" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MCH_NATIVE_DWIDTH-1)]" />
<PORT BUS= "MCH1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "17" NAME= "MCH1_ReadData_Read" SIGNAME= "__NOC__" />
<PORT BUS= "MCH1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "18" NAME= "MCH1_ReadData_Exists" SIGNAME= "__NOC__" />
<PORT BUS= "MCH2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "19" NAME= "MCH2_Access_Control" SIGNAME= "__NOC__" />
<PORT BUS= "MCH2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "20" NAME= "MCH2_Access_Data" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MCH_NATIVE_DWIDTH-1)]" />
<PORT BUS= "MCH2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "21" NAME= "MCH2_Access_Write" SIGNAME= "__NOC__" />
<PORT BUS= "MCH2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "22" NAME= "MCH2_Access_Full" SIGNAME= "__NOC__" />
<PORT BUS= "MCH2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "23" NAME= "MCH2_ReadData_Control" SIGNAME= "__NOC__" />
<PORT BUS= "MCH2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "24" NAME= "MCH2_ReadData_Data" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MCH_NATIVE_DWIDTH-1)]" />
<PORT BUS= "MCH2" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "25" NAME= "MCH2_ReadData_Read" SIGNAME= "__NOC__" />
<PORT BUS= "MCH2" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "26" NAME= "MCH2_ReadData_Exists" SIGNAME= "__NOC__" />
<PORT BUS= "MCH3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "27" NAME= "MCH3_Access_Control" SIGNAME= "__NOC__" />
<PORT BUS= "MCH3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "28" NAME= "MCH3_Access_Data" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MCH_NATIVE_DWIDTH-1)]" />
<PORT BUS= "MCH3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "29" NAME= "MCH3_Access_Write" SIGNAME= "__NOC__" />
<PORT BUS= "MCH3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "30" NAME= "MCH3_Access_Full" SIGNAME= "__NOC__" />
<PORT BUS= "MCH3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "31" NAME= "MCH3_ReadData_Control" SIGNAME= "__NOC__" />
<PORT BUS= "MCH3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "32" NAME= "MCH3_ReadData_Data" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MCH_NATIVE_DWIDTH-1)]" />
<PORT BUS= "MCH3" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "33" NAME= "MCH3_ReadData_Read" SIGNAME= "__NOC__" />
<PORT BUS= "MCH3" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "34" NAME= "MCH3_ReadData_Exists" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "35" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "36" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "37" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "38" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "39" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "40" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "41" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "42" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "43" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "44" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "45" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "46" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "47" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "48" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "49" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "50" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "51" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "52" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "53" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "54" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "55" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "56" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "57" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "58" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "59" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "60" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "61" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "62" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "63" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "64" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "65" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "66" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "67" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "68" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "69" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "70" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "71" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "72" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "73" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "74" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT DIR= "I" MPD_INDEX= "75" NAME= "Mem_DQ_I" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MAX_MEM_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "76" NAME= "Mem_DQ_O" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MAX_MEM_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "77" NAME= "Mem_DQ_T" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_MAX_MEM_WIDTH-1)]" />
<PORT DIR= "O" MPD_INDEX= "79" NAME= "Mem_RPN" SIGNAME= "__NOC__" >
<DESCRIPTION > Memory Reset/Power Down</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "83" NAME= "Mem_QWEN" SIGNAME= "__NOC__" VECFORMULA= "[0:((C_MAX_MEM_WIDTH/8)-1)]" >
<DESCRIPTION > Memory Qualified Write Enable</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "85" NAME= "Mem_CE" SIGNAME= "__NOC__" VECFORMULA= "[0:(C_NUM_BANKS_MEM-1)]" >
<DESCRIPTION > Memory Chip Enable Active High</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "87" NAME= "Mem_LBON" SIGNAME= "__NOC__" >
<DESCRIPTION > Memory Linear/Interleaved Burst Order</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "88" NAME= "Mem_CKEN" SIGNAME= "__NOC__" >
<DESCRIPTION > Memory Clock Enable</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "89" NAME= "Mem_RNW" SIGNAME= "__NOC__" >
<DESCRIPTION > Memory Read Not Write</DESCRIPTION>
</PORT>
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_MEMORY_CHANNEL" IS_VALID= "FALSE" MPD_INDEX= "1" NAME= "MCH0" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_MEMORY_CHANNEL" IS_VALID= "FALSE" MPD_INDEX= "2" NAME= "MCH1" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_MEMORY_CHANNEL" IS_VALID= "FALSE" MPD_INDEX= "3" NAME= "MCH2" TYPE= "TARGET" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_MEMORY_CHANNEL" IS_VALID= "FALSE" MPD_INDEX= "4" NAME= "MCH3" TYPE= "TARGET" />
</MODULE>
<MODULE HWVERSION= "3.00.b" INSTANCE= "PCIe_Bridge" IPTYPE= "PERIPHERAL" MHS_INDEX= "11" MODCLASS= "PERIPHERAL" MODTYPE= "plbv46_pcie" >
<DESCRIPTION TYPE= "SHORT" > PLBv46 IP Interface (IPIF) to LogicCORE PCI Express Bridge</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > Bridge between the PLBv46 IPIF and the Xilinx LogiCORE PCI Express Interface core</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/plbv46_pcie_v3_00_b/doc/plbv46_pcie.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER MPD_INDEX= "0" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_IPIFBAR_NUM" TYPE= "INTEGER" VALUE= "2" >
<DESCRIPTION > Number of IPIF devices</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_INCLUDE_BAROFFSET_REG" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Include Registers for Each IPIF BAR High-order Bits to be Substituted in Translation.</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "3" NAME= "C_PCIBAR_NUM" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PCI Devices</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_NO_OF_LANES" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of Lanes</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "5" NAME= "C_DEVICE_ID" TYPE= "std_logic_vector" VALUE= "0x0505" >
<DESCRIPTION > PCI Configuration Space Header Device ID</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "6" NAME= "C_VENDOR_ID" TYPE= "std_logic_vector" VALUE= "0x10EE" >
<DESCRIPTION > PCI Configuration Space Header Vendor ID</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "7" NAME= "C_CLASS_CODE" TYPE= "std_logic_vector" VALUE= "0x058000" >
<DESCRIPTION > PCI Configuration Space Header Class Code</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_REV_ID" TYPE= "std_logic_vector" VALUE= "0x00" >
<DESCRIPTION > PCI Configuration Space Header Rev ID</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_SUBSYSTEM_ID" TYPE= "std_logic_vector" VALUE= "0x0000" >
<DESCRIPTION > PCI Configuration Space Header Subsystem ID</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_SUBSYSTEM_VENDOR_ID" TYPE= "std_logic_vector" VALUE= "0x0000" >
<DESCRIPTION > PCI Configuration Space Header Subsystem Vendor ID</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "11" NAME= "C_COMP_TIMEOUT" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Completion Timeout</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "12" NAME= "C_SUBFAMILY" TYPE= "STRING" VALUE= "fx" >
<DESCRIPTION > Device Sub Family</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_MPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Master Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "14" NAME= "C_MPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > Master Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "15" NAME= "C_MPLB_SMALLEST_SLAVE" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > Smallest Master Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "16" NAME= "C_MPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "64" >
<DESCRIPTION > Native Data Bus Width of PLB Master</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "17" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "18" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "19" NAME= "C_SPLB_SMALLEST_MASTER" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > Smallest Master Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "20" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "21" NAME= "C_BASEADDR" TYPE= "std_logic_vector" VALUE= "0x85c00000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "22" NAME= "C_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0x85c0ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "23" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "24" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "64" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "25" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" CHANGEDBY= "USER" MPD_INDEX= "26" NAME= "C_IPIFBAR_0" TYPE= "std_logic_vector" VALUE= "0xc0000000" >
<DESCRIPTION > IPIF BAR0 Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" CHANGEDBY= "USER" MPD_INDEX= "27" NAME= "C_IPIFBAR_1" TYPE= "std_logic_vector" VALUE= "0xe0000000" >
<DESCRIPTION > IPIF BAR1 Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "28" NAME= "C_IPIFBAR_2" TYPE= "std_logic_vector" VALUE= "0xFFFFFFFF" >
<DESCRIPTION > IPIF BAR2 Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "29" NAME= "C_IPIFBAR_3" TYPE= "std_logic_vector" VALUE= "0xFFFFFFFF" >
<DESCRIPTION > IPIF BAR3 Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "30" NAME= "C_IPIFBAR_4" TYPE= "std_logic_vector" VALUE= "0xFFFFFFFF" >
<DESCRIPTION > IPIF BAR4 Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "BRIDGE" MPD_INDEX= "31" NAME= "C_IPIFBAR_5" TYPE= "std_logic_vector" VALUE= "0xFFFFFFFF" >
<DESCRIPTION > IPIF BAR5 Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" CHANGEDBY= "USER" MPD_INDEX= "32" NAME= "C_IPIFBAR_HIGHADDR_0" TYPE= "std_logic_vector" VALUE= "0xdfffffff" >
<DESCRIPTION > IPIF BAR0 High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" CHANGEDBY= "USER" MPD_INDEX= "33" NAME= "C_IPIFBAR_HIGHADDR_1" TYPE= "std_logic_vector" VALUE= "0xefffffff" >
<DESCRIPTION > IPIF BAR1 High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "34" NAME= "C_IPIFBAR_HIGHADDR_2" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > IPIF BAR2 High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "35" NAME= "C_IPIFBAR_HIGHADDR_3" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > IPIF BAR3 High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "36" NAME= "C_IPIFBAR_HIGHADDR_4" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > IPIF BAR4 High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "BRIDGE" MPD_INDEX= "37" NAME= "C_IPIFBAR_HIGHADDR_5" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > IPIF BAR5 High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "38" NAME= "C_IPIFBAR2PCIBAR_0" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Remote PCI device BAR to which IPIF BAR0 is translated when configured with FIFOs
</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "39" NAME= "C_IPIFBAR2PCIBAR_1" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Remote PCI device BAR to which IPIF BAR1 is translated when configured with FIFOs
</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "40" NAME= "C_IPIFBAR2PCIBAR_2" TYPE= "std_logic_vector" VALUE= "0xFFFFFFFF" >
<DESCRIPTION > Remote PCI device BAR to which IPIF BAR2 is translated when configured with FIFOs
</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "41" NAME= "C_IPIFBAR2PCIBAR_3" TYPE= "std_logic_vector" VALUE= "0xFFFFFFFF" >
<DESCRIPTION > Remote PCI device BAR to which IPIF BAR3 is translated when configured with FIFOs
</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "42" NAME= "C_IPIFBAR2PCIBAR_4" TYPE= "std_logic_vector" VALUE= "0xFFFFFFFF" >
<DESCRIPTION > Remote PCI device BAR to which IPIF BAR4 is translated when configured with FIFOs
</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "43" NAME= "C_IPIFBAR2PCIBAR_5" TYPE= "std_logic_vector" VALUE= "0xFFFFFFFF" >
<DESCRIPTION > Remote PCI device BAR to which IPIF BAR5 is translated when configured with FIFOs
</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "44" NAME= "C_IPIFBAR_AS_0" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > IPIF BAR 0 Address Size</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "45" NAME= "C_IPIFBAR_AS_1" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > IPIF BAR 1 Address Size</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "46" NAME= "C_IPIFBAR_AS_2" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > IPIF BAR 2 Address Size</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "47" NAME= "C_IPIFBAR_AS_3" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > IPIF BAR 3 Address Size</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "48" NAME= "C_IPIFBAR_AS_4" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > IPIF BAR 4 Address Size</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "49" NAME= "C_IPIFBAR_AS_5" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > IPIF BAR 5 Address Size</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "50" NAME= "C_PCIBAR2IPIFBAR_0" TYPE= "std_logic_vector" VALUE= "0xf8000000" >
<DESCRIPTION > Remote PLB device BAR to which PCI BAR0 is translated when configured with FIFOs</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "51" NAME= "C_PCIBAR2IPIFBAR_1" TYPE= "std_logic_vector" VALUE= "0x00000000" >
<DESCRIPTION > Remote PLB device BAR to which PCI BAR1 is translated when configured with FIFOs</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "52" NAME= "C_PCIBAR2IPIFBAR_2" TYPE= "std_logic_vector" VALUE= "0xFFFFFFFF" >
<DESCRIPTION > Remote PLB device BAR to which PCI BAR2 is translated when configured with FIFOs</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "53" NAME= "C_PCIBAR_LEN_0" TYPE= "INTEGER" VALUE= "20" >
<DESCRIPTION > Power of 2 defining the Size in Bytes of PCI BAR0 Space</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "54" NAME= "C_PCIBAR_LEN_1" TYPE= "INTEGER" VALUE= "28" >
<DESCRIPTION > Power of 2 defining the Size in Bytes of PCI BAR1 Space</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "55" NAME= "C_PCIBAR_LEN_2" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Power of 2 defining the Size in Bytes of PCI BAR2 Space</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "56" NAME= "C_BOARD" TYPE= "STRING" VALUE= "ml507" >
<DESCRIPTION > Type of Board</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "57" NAME= "C_DEVICE" TYPE= "STRING" VALUE= "5vfx70t" >
<DESCRIPTION > Device Name</DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2243952640" BASENAME= "C_BASEADDR" BASEVALUE= "0x85c00000" HIGHDECIMAL= "2244018175" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x85c0ffff" MEMTYPE= "REGISTER" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "3221225472" BASENAME= "C_IPIFBAR_0" BASEVALUE= "0xc0000000" HIGHDECIMAL= "3758096383" HIGHNAME= "C_IPIFBAR_HIGHADDR_0" HIGHVALUE= "0xdfffffff" MEMTYPE= "BRIDGE" SIZE= "536870912" SIZEABRV= "512M" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "3758096384" BASENAME= "C_IPIFBAR_1" BASEVALUE= "0xe0000000" HIGHDECIMAL= "4026531839" HIGHNAME= "C_IPIFBAR_HIGHADDR_1" HIGHVALUE= "0xefffffff" MEMTYPE= "BRIDGE" SIZE= "268435456" SIZEABRV= "256M" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_IPIFBAR_2" BASEVALUE= "0xFFFFFFFF" HIGHDECIMAL= "0" HIGHNAME= "C_IPIFBAR_HIGHADDR_2" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_IPIFBAR_3" BASEVALUE= "0xFFFFFFFF" HIGHDECIMAL= "0" HIGHNAME= "C_IPIFBAR_HIGHADDR_3" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_IPIFBAR_4" BASEVALUE= "0xFFFFFFFF" HIGHDECIMAL= "0" HIGHNAME= "C_IPIFBAR_HIGHADDR_4" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
<MEMRANGE BASEDECIMAL= "4294967295" BASENAME= "C_IPIFBAR_5" BASEVALUE= "0xFFFFFFFF" HIGHDECIMAL= "0" HIGHNAME= "C_IPIFBAR_HIGHADDR_5" HIGHVALUE= "0x00000000" IS_VALID= "FALSE" MEMTYPE= "BRIDGE" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "74" NAME= "PERSTN" SIGNAME= "net_vcc" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "75" NAME= "REFCLK" SIGNAME= "PCIe_Diff_Clk" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "2" MPD_INDEX= "78" NAME= "RXN" SIGNAME= "fpga_0_PCIe_Bridge_RXN_pin" VECFORMULA= "[(C_NO_OF_LANES-1):0]" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "3" MPD_INDEX= "79" NAME= "RXP" SIGNAME= "fpga_0_PCIe_Bridge_RXP_pin" VECFORMULA= "[(C_NO_OF_LANES-1):0]" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "4" MPD_INDEX= "80" NAME= "TXN" SIGNAME= "fpga_0_PCIe_Bridge_TXN_pin" VECFORMULA= "[(C_NO_OF_LANES-1):0]" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "5" MPD_INDEX= "81" NAME= "TXP" SIGNAME= "fpga_0_PCIe_Bridge_TXP_pin" VECFORMULA= "[(C_NO_OF_LANES-1):0]" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "6" MPD_INDEX= "83" NAME= "MSI_request" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "net_gnd" />
<PORT BUS= "MPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "MPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_MPLB_Rst" DIR= "I" MPD_INDEX= "1" NAME= "MPLB_Rst" SIGIS= "RST" SIGNAME= "ppc440_0_SPLB0_MPLB_Rst" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MTimeout" DIR= "I" MPD_INDEX= "2" NAME= "PLB_MTimeout" SIGNAME= "ppc440_0_SPLB0_PLB_MTimeout" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MIRQ" DIR= "I" MPD_INDEX= "3" NAME= "PLB_MIRQ" SIGNAME= "ppc440_0_SPLB0_PLB_MIRQ" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MAddrAck" DIR= "I" MPD_INDEX= "4" NAME= "PLB_MAddrAck" SIGNAME= "ppc440_0_SPLB0_PLB_MAddrAck" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MSSize" DIR= "I" MPD_INDEX= "5" NAME= "PLB_MSSize" SIGNAME= "ppc440_0_SPLB0_PLB_MSSize" VECFORMULA= "[0:1]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MRearbitrate" DIR= "I" MPD_INDEX= "6" NAME= "PLB_MRearbitrate" SIGNAME= "ppc440_0_SPLB0_PLB_MRearbitrate" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MBusy" DIR= "I" MPD_INDEX= "7" NAME= "PLB_MBusy" SIGNAME= "ppc440_0_SPLB0_PLB_MBusy" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MRdErr" DIR= "I" MPD_INDEX= "8" NAME= "PLB_MRdErr" SIGNAME= "ppc440_0_SPLB0_PLB_MRdErr" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MWrErr" DIR= "I" MPD_INDEX= "9" NAME= "PLB_MWrErr" SIGNAME= "ppc440_0_SPLB0_PLB_MWrErr" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MWrDAck" DIR= "I" MPD_INDEX= "10" NAME= "PLB_MWrDAck" SIGNAME= "ppc440_0_SPLB0_PLB_MWrDAck" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MRdDBus" DIR= "I" MPD_INDEX= "11" NAME= "PLB_MRdDBus" SIGNAME= "ppc440_0_SPLB0_PLB_MRdDBus" VECFORMULA= "[0:(C_MPLB_DWIDTH-1)]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MRdWdAddr" DIR= "I" MPD_INDEX= "12" NAME= "PLB_MRdWdAddr" SIGNAME= "ppc440_0_SPLB0_PLB_MRdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MRdDAck" DIR= "I" MPD_INDEX= "13" NAME= "PLB_MRdDAck" SIGNAME= "ppc440_0_SPLB0_PLB_MRdDAck" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MRdBTerm" DIR= "I" MPD_INDEX= "14" NAME= "PLB_MRdBTerm" SIGNAME= "ppc440_0_SPLB0_PLB_MRdBTerm" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_PLB_MWrBTerm" DIR= "I" MPD_INDEX= "15" NAME= "PLB_MWrBTerm" SIGNAME= "ppc440_0_SPLB0_PLB_MWrBTerm" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_request" DIR= "O" MPD_INDEX= "16" NAME= "M_request" SIGNAME= "ppc440_0_SPLB0_M_request" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_priority" DIR= "O" MPD_INDEX= "17" NAME= "M_priority" SIGNAME= "ppc440_0_SPLB0_M_priority" VECFORMULA= "[0:1]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_busLock" DIR= "O" MPD_INDEX= "18" NAME= "M_buslock" SIGNAME= "ppc440_0_SPLB0_M_busLock" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_RNW" DIR= "O" MPD_INDEX= "19" NAME= "M_RNW" SIGNAME= "ppc440_0_SPLB0_M_RNW" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_BE" DIR= "O" MPD_INDEX= "20" NAME= "M_BE" SIGNAME= "ppc440_0_SPLB0_M_BE" VECFORMULA= "[0:((C_MPLB_DWIDTH/8)-1)]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_MSize" DIR= "O" MPD_INDEX= "21" NAME= "M_MSize" SIGNAME= "ppc440_0_SPLB0_M_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_size" DIR= "O" MPD_INDEX= "22" NAME= "M_size" SIGNAME= "ppc440_0_SPLB0_M_size" VECFORMULA= "[0:3]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_type" DIR= "O" MPD_INDEX= "23" NAME= "M_type" SIGNAME= "ppc440_0_SPLB0_M_type" VECFORMULA= "[0:2]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_lockErr" DIR= "O" MPD_INDEX= "24" NAME= "M_lockErr" SIGNAME= "ppc440_0_SPLB0_M_lockErr" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_abort" DIR= "O" MPD_INDEX= "25" NAME= "M_abort" SIGNAME= "ppc440_0_SPLB0_M_abort" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_TAttribute" DIR= "O" MPD_INDEX= "26" NAME= "M_TAttribute" SIGNAME= "ppc440_0_SPLB0_M_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_UABus" DIR= "O" MPD_INDEX= "27" NAME= "M_UABus" SIGNAME= "ppc440_0_SPLB0_M_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_ABus" DIR= "O" MPD_INDEX= "28" NAME= "M_ABus" SIGNAME= "ppc440_0_SPLB0_M_ABus" VECFORMULA= "[0:(C_MPLB_AWIDTH-1)]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_wrDBus" DIR= "O" MPD_INDEX= "29" NAME= "M_wrDBus" SIGNAME= "ppc440_0_SPLB0_M_wrDBus" VECFORMULA= "[0:(C_MPLB_DWIDTH-1)]" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_wrBurst" DIR= "O" MPD_INDEX= "30" NAME= "M_wrBurst" SIGNAME= "ppc440_0_SPLB0_M_wrBurst" />
<PORT BUS= "MPLB" DEF_SIGNAME= "ppc440_0_SPLB0_M_rdBurst" DIR= "O" MPD_INDEX= "31" NAME= "M_rdBurst" SIGNAME= "ppc440_0_SPLB0_M_rdBurst" />
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "32" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "33" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "34" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "35" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "36" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "37" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "38" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "39" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "40" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "41" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "42" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "43" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "44" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "45" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "46" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "47" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "48" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "49" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "50" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "51" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "52" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "53" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "54" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "55" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "56" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "57" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "58" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "59" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "60" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "61" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "62" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "63" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "64" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "65" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "66" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "67" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "68" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "69" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "70" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "71" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "72" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "73" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT DIR= "O" MPD_INDEX= "76" NAME= "Bridge_Clk" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "77" NAME= "LinkUp" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "82" NAME= "IP2INTC_Irpt" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
<BUSINTERFACE BUSNAME= "ppc440_0_SPLB0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "1" NAME= "MPLB" TYPE= "MASTER" />
</MODULE>
<MODULE BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" HWVERSION= "1.04.a" INSTANCE= "ppc440_0_SPLB0" IPTYPE= "BUS" MHS_INDEX= "12" MODCLASS= "BUS" MODTYPE= "plb_v46" >
<DESCRIPTION TYPE= "SHORT" > Processor Local Bus (PLB) 4.6</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > 'Xilinx 64-bit Processor Local Bus (PLB) consists of a bus control unit, a watchdog timer, and separate address, write, and read data path units with a a three-cycle only arbitration feature'</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/plb_v46_v1_04_a/doc/plb_v46.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "0" NAME= "C_PLBV46_NUM_MASTERS" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "1" NAME= "C_PLBV46_NUM_SLAVES" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Number of PLB Slaves</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "2" NAME= "C_PLBV46_MID_WIDTH" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > PLB Master ID Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "3" NAME= "C_PLBV46_AWIDTH" TYPE= "integer" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "4" NAME= "C_PLBV46_DWIDTH" TYPE= "integer" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_DCR_INTFCE" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Include DCR Interface and Error Registers</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" MPD_INDEX= "6" NAME= "C_BASEADDR" TYPE= "std_logic_vector" VALUE= "0b1111111111" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" MPD_INDEX= "7" NAME= "C_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0b0000000000" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_DCR_AWIDTH" TYPE= "integer" VALUE= "10" >
<DESCRIPTION > DCR Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_DCR_DWIDTH" TYPE= "integer" VALUE= "32" >
<DESCRIPTION > DCR Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_EXT_RESET_HIGH" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > External Reset Active High </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_IRQ_ACTIVE" TYPE= "std_logic" VALUE= "1" >
<DESCRIPTION > IRQ Active State </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "12" NAME= "C_NUM_CLK_PLB2OPB_REARB" TYPE= "integer" VALUE= "5" >
<DESCRIPTION > < qt> Number of PLB Clock Periods a PLB Master that Received a Rearbitrate from an OPB2PLB Bridge on a Read Operation is Denied Grant on the PLB Bus< /qt> </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_ADDR_PIPELINING_TYPE" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Enable Address Pipelining Type</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "14" NAME= "C_FAMILY" TYPE= "string" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "15" NAME= "C_P2P" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Optimize PLB for Point-to-point Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "16" NAME= "C_ARB_TYPE" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Selects the Arbitration Scheme</DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "1023" BASENAME= "C_BASEADDR" BASEVALUE= "0b1111111111" HIGHDECIMAL= "0" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0b0000000000" IS_VALID= "FALSE" MEMTYPE= "REGISTER" MINSIZE= "0x08" SIZE= "0" SIZEABRV= "U" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SDCR" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "0" NAME= "PLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "1" NAME= "SYS_Rst" SIGIS= "RST" SIGNAME= "sys_bus_reset" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_Rst" DIR= "O" MPD_INDEX= "2" NAME= "PLB_Rst" SIGIS= "RST" SIGNAME= "ppc440_0_splb0_PLB_Rst" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_SPLB_Rst" DIR= "O" MPD_INDEX= "3" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "ppc440_0_splb0_SPLB_Rst" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_MPLB_Rst" DIR= "O" MPD_INDEX= "4" NAME= "MPLB_Rst" SIGIS= "RST" SIGNAME= "ppc440_0_splb0_MPLB_Rst" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "5" NAME= "PLB_dcrAck" SIGNAME= "__NOC__" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "6" NAME= "PLB_dcrDBus" SIGNAME= "__NOC__" VECFORMULA= "[0:C_DCR_DWIDTH-1]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "7" NAME= "DCR_ABus" SIGNAME= "__NOC__" VECFORMULA= "[0:C_DCR_AWIDTH-1]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "8" NAME= "DCR_DBus" SIGNAME= "__NOC__" VECFORMULA= "[0:C_DCR_DWIDTH-1]" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "9" NAME= "DCR_Read" SIGNAME= "__NOC__" />
<PORT BUS= "SDCR" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "10" NAME= "DCR_Write" SIGNAME= "__NOC__" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_ABus" DIR= "I" MPD_INDEX= "11" NAME= "M_ABus" SIGNAME= "ppc440_0_splb0_M_ABus" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*32)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_UABus" DIR= "I" MPD_INDEX= "12" NAME= "M_UABus" SIGNAME= "ppc440_0_splb0_M_UABus" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*32)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_BE" DIR= "I" MPD_INDEX= "13" NAME= "M_BE" SIGNAME= "ppc440_0_splb0_M_BE" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*(C_PLBV46_DWIDTH/8))-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_RNW" DIR= "I" MPD_INDEX= "14" NAME= "M_RNW" SIGNAME= "ppc440_0_splb0_M_RNW" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_abort" DIR= "I" MPD_INDEX= "15" NAME= "M_abort" SIGNAME= "ppc440_0_splb0_M_abort" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_busLock" DIR= "I" MPD_INDEX= "16" NAME= "M_busLock" SIGNAME= "ppc440_0_splb0_M_busLock" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_TAttribute" DIR= "I" MPD_INDEX= "17" NAME= "M_TAttribute" SIGNAME= "ppc440_0_splb0_M_TAttribute" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*16)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_lockErr" DIR= "I" MPD_INDEX= "18" NAME= "M_lockErr" SIGNAME= "ppc440_0_splb0_M_lockErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_MSize" DIR= "I" MPD_INDEX= "19" NAME= "M_MSize" SIGNAME= "ppc440_0_splb0_M_MSize" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*2)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_priority" DIR= "I" MPD_INDEX= "20" NAME= "M_priority" SIGNAME= "ppc440_0_splb0_M_priority" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*2)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_rdBurst" DIR= "I" MPD_INDEX= "21" NAME= "M_rdBurst" SIGNAME= "ppc440_0_splb0_M_rdBurst" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_request" DIR= "I" MPD_INDEX= "22" NAME= "M_request" SIGNAME= "ppc440_0_splb0_M_request" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_size" DIR= "I" MPD_INDEX= "23" NAME= "M_size" SIGNAME= "ppc440_0_splb0_M_size" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*4)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_type" DIR= "I" MPD_INDEX= "24" NAME= "M_type" SIGNAME= "ppc440_0_splb0_M_type" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*3)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_wrBurst" DIR= "I" MPD_INDEX= "25" NAME= "M_wrBurst" SIGNAME= "ppc440_0_splb0_M_wrBurst" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_M_wrDBus" DIR= "I" MPD_INDEX= "26" NAME= "M_wrDBus" SIGNAME= "ppc440_0_splb0_M_wrDBus" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*C_PLBV46_DWIDTH)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_addrAck" DIR= "I" MPD_INDEX= "27" NAME= "Sl_addrAck" SIGNAME= "ppc440_0_splb0_Sl_addrAck" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_MRdErr" DIR= "I" MPD_INDEX= "28" NAME= "Sl_MRdErr" SIGNAME= "ppc440_0_splb0_Sl_MRdErr" VECFORMULA= "[0:(C_PLBV46_NUM_SLAVES*C_PLBV46_NUM_MASTERS)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_MWrErr" DIR= "I" MPD_INDEX= "29" NAME= "Sl_MWrErr" SIGNAME= "ppc440_0_splb0_Sl_MWrErr" VECFORMULA= "[0:(C_PLBV46_NUM_SLAVES*C_PLBV46_NUM_MASTERS)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_MBusy" DIR= "I" MPD_INDEX= "30" NAME= "Sl_MBusy" SIGNAME= "ppc440_0_splb0_Sl_MBusy" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*C_PLBV46_NUM_MASTERS - 1 ]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_rdBTerm" DIR= "I" MPD_INDEX= "31" NAME= "Sl_rdBTerm" SIGNAME= "ppc440_0_splb0_Sl_rdBTerm" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_rdComp" DIR= "I" MPD_INDEX= "32" NAME= "Sl_rdComp" SIGNAME= "ppc440_0_splb0_Sl_rdComp" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_rdDAck" DIR= "I" MPD_INDEX= "33" NAME= "Sl_rdDAck" SIGNAME= "ppc440_0_splb0_Sl_rdDAck" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_rdDBus" DIR= "I" MPD_INDEX= "34" NAME= "Sl_rdDBus" SIGNAME= "ppc440_0_splb0_Sl_rdDBus" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*C_PLBV46_DWIDTH-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_rdWdAddr" DIR= "I" MPD_INDEX= "35" NAME= "Sl_rdWdAddr" SIGNAME= "ppc440_0_splb0_Sl_rdWdAddr" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*4-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_rearbitrate" DIR= "I" MPD_INDEX= "36" NAME= "Sl_rearbitrate" SIGNAME= "ppc440_0_splb0_Sl_rearbitrate" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_SSize" DIR= "I" MPD_INDEX= "37" NAME= "Sl_SSize" SIGNAME= "ppc440_0_splb0_Sl_SSize" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*2-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_wait" DIR= "I" MPD_INDEX= "38" NAME= "Sl_wait" SIGNAME= "ppc440_0_splb0_Sl_wait" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_wrBTerm" DIR= "I" MPD_INDEX= "39" NAME= "Sl_wrBTerm" SIGNAME= "ppc440_0_splb0_Sl_wrBTerm" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_wrComp" DIR= "I" MPD_INDEX= "40" NAME= "Sl_wrComp" SIGNAME= "ppc440_0_splb0_Sl_wrComp" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_wrDAck" DIR= "I" MPD_INDEX= "41" NAME= "Sl_wrDAck" SIGNAME= "ppc440_0_splb0_Sl_wrDAck" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_Sl_MIRQ" DIR= "I" MPD_INDEX= "42" NAME= "Sl_MIRQ" SIGNAME= "ppc440_0_splb0_Sl_MIRQ" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES*C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MIRQ" DIR= "O" MPD_INDEX= "43" NAME= "PLB_MIRQ" SIGNAME= "ppc440_0_splb0_PLB_MIRQ" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_ABus" DIR= "O" MPD_INDEX= "44" NAME= "PLB_ABus" SIGNAME= "ppc440_0_splb0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_UABus" DIR= "O" MPD_INDEX= "45" NAME= "PLB_UABus" SIGNAME= "ppc440_0_splb0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_BE" DIR= "O" MPD_INDEX= "46" NAME= "PLB_BE" SIGNAME= "ppc440_0_splb0_PLB_BE" VECFORMULA= "[0:(C_PLBV46_DWIDTH/8)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MAddrAck" DIR= "O" MPD_INDEX= "47" NAME= "PLB_MAddrAck" SIGNAME= "ppc440_0_splb0_PLB_MAddrAck" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MTimeout" DIR= "O" MPD_INDEX= "48" NAME= "PLB_MTimeout" SIGNAME= "ppc440_0_splb0_PLB_MTimeout" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MBusy" DIR= "O" MPD_INDEX= "49" NAME= "PLB_MBusy" SIGNAME= "ppc440_0_splb0_PLB_MBusy" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MRdErr" DIR= "O" MPD_INDEX= "50" NAME= "PLB_MRdErr" SIGNAME= "ppc440_0_splb0_PLB_MRdErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MWrErr" DIR= "O" MPD_INDEX= "51" NAME= "PLB_MWrErr" SIGNAME= "ppc440_0_splb0_PLB_MWrErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MRdBTerm" DIR= "O" MPD_INDEX= "52" NAME= "PLB_MRdBTerm" SIGNAME= "ppc440_0_splb0_PLB_MRdBTerm" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MRdDAck" DIR= "O" MPD_INDEX= "53" NAME= "PLB_MRdDAck" SIGNAME= "ppc440_0_splb0_PLB_MRdDAck" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MRdDBus" DIR= "O" MPD_INDEX= "54" NAME= "PLB_MRdDBus" SIGNAME= "ppc440_0_splb0_PLB_MRdDBus" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*C_PLBV46_DWIDTH)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MRdWdAddr" DIR= "O" MPD_INDEX= "55" NAME= "PLB_MRdWdAddr" SIGNAME= "ppc440_0_splb0_PLB_MRdWdAddr" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*4)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MRearbitrate" DIR= "O" MPD_INDEX= "56" NAME= "PLB_MRearbitrate" SIGNAME= "ppc440_0_splb0_PLB_MRearbitrate" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MWrBTerm" DIR= "O" MPD_INDEX= "57" NAME= "PLB_MWrBTerm" SIGNAME= "ppc440_0_splb0_PLB_MWrBTerm" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MWrDAck" DIR= "O" MPD_INDEX= "58" NAME= "PLB_MWrDAck" SIGNAME= "ppc440_0_splb0_PLB_MWrDAck" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MSSize" DIR= "O" MPD_INDEX= "59" NAME= "PLB_MSSize" SIGNAME= "ppc440_0_splb0_PLB_MSSize" VECFORMULA= "[0:(C_PLBV46_NUM_MASTERS*2)-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_PAValid" DIR= "O" MPD_INDEX= "60" NAME= "PLB_PAValid" SIGNAME= "ppc440_0_splb0_PLB_PAValid" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_RNW" DIR= "O" MPD_INDEX= "61" NAME= "PLB_RNW" SIGNAME= "ppc440_0_splb0_PLB_RNW" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SAValid" DIR= "O" MPD_INDEX= "62" NAME= "PLB_SAValid" SIGNAME= "ppc440_0_splb0_PLB_SAValid" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_abort" DIR= "O" MPD_INDEX= "63" NAME= "PLB_abort" SIGNAME= "ppc440_0_splb0_PLB_abort" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_busLock" DIR= "O" MPD_INDEX= "64" NAME= "PLB_busLock" SIGNAME= "ppc440_0_splb0_PLB_busLock" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_TAttribute" DIR= "O" MPD_INDEX= "65" NAME= "PLB_TAttribute" SIGNAME= "ppc440_0_splb0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_lockErr" DIR= "O" MPD_INDEX= "66" NAME= "PLB_lockErr" SIGNAME= "ppc440_0_splb0_PLB_lockErr" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_masterID" DIR= "O" MPD_INDEX= "67" NAME= "PLB_masterID" SIGNAME= "ppc440_0_splb0_PLB_masterID" VECFORMULA= "[0:C_PLBV46_MID_WIDTH-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_MSize" DIR= "O" MPD_INDEX= "68" NAME= "PLB_MSize" SIGNAME= "ppc440_0_splb0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_rdPendPri" DIR= "O" MPD_INDEX= "69" NAME= "PLB_rdPendPri" SIGNAME= "ppc440_0_splb0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_wrPendPri" DIR= "O" MPD_INDEX= "70" NAME= "PLB_wrPendPri" SIGNAME= "ppc440_0_splb0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_rdPendReq" DIR= "O" MPD_INDEX= "71" NAME= "PLB_rdPendReq" SIGNAME= "ppc440_0_splb0_PLB_rdPendReq" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_wrPendReq" DIR= "O" MPD_INDEX= "72" NAME= "PLB_wrPendReq" SIGNAME= "ppc440_0_splb0_PLB_wrPendReq" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_rdBurst" DIR= "O" MPD_INDEX= "73" NAME= "PLB_rdBurst" SIGNAME= "ppc440_0_splb0_PLB_rdBurst" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_rdPrim" DIR= "O" MPD_INDEX= "74" NAME= "PLB_rdPrim" SIGNAME= "ppc440_0_splb0_PLB_rdPrim" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_reqPri" DIR= "O" MPD_INDEX= "75" NAME= "PLB_reqPri" SIGNAME= "ppc440_0_splb0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_size" DIR= "O" MPD_INDEX= "76" NAME= "PLB_size" SIGNAME= "ppc440_0_splb0_PLB_size" VECFORMULA= "[0:3]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_type" DIR= "O" MPD_INDEX= "77" NAME= "PLB_type" SIGNAME= "ppc440_0_splb0_PLB_type" VECFORMULA= "[0:2]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_wrBurst" DIR= "O" MPD_INDEX= "78" NAME= "PLB_wrBurst" SIGNAME= "ppc440_0_splb0_PLB_wrBurst" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_wrDBus" DIR= "O" MPD_INDEX= "79" NAME= "PLB_wrDBus" SIGNAME= "ppc440_0_splb0_PLB_wrDBus" VECFORMULA= "[0:C_PLBV46_DWIDTH-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_wrPrim" DIR= "O" MPD_INDEX= "80" NAME= "PLB_wrPrim" SIGNAME= "ppc440_0_splb0_PLB_wrPrim" VECFORMULA= "[0:C_PLBV46_NUM_SLAVES-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SaddrAck" DIR= "O" MPD_INDEX= "81" NAME= "PLB_SaddrAck" SIGNAME= "ppc440_0_splb0_PLB_SaddrAck" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SMRdErr" DIR= "O" MPD_INDEX= "82" NAME= "PLB_SMRdErr" SIGNAME= "ppc440_0_splb0_PLB_SMRdErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SMWrErr" DIR= "O" MPD_INDEX= "83" NAME= "PLB_SMWrErr" SIGNAME= "ppc440_0_splb0_PLB_SMWrErr" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SMBusy" DIR= "O" MPD_INDEX= "84" NAME= "PLB_SMBusy" SIGNAME= "ppc440_0_splb0_PLB_SMBusy" VECFORMULA= "[0:C_PLBV46_NUM_MASTERS-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SrdBTerm" DIR= "O" MPD_INDEX= "85" NAME= "PLB_SrdBTerm" SIGNAME= "ppc440_0_splb0_PLB_SrdBTerm" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SrdComp" DIR= "O" MPD_INDEX= "86" NAME= "PLB_SrdComp" SIGNAME= "ppc440_0_splb0_PLB_SrdComp" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SrdDAck" DIR= "O" MPD_INDEX= "87" NAME= "PLB_SrdDAck" SIGNAME= "ppc440_0_splb0_PLB_SrdDAck" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SrdDBus" DIR= "O" MPD_INDEX= "88" NAME= "PLB_SrdDBus" SIGNAME= "ppc440_0_splb0_PLB_SrdDBus" VECFORMULA= "[0:C_PLBV46_DWIDTH-1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SrdWdAddr" DIR= "O" MPD_INDEX= "89" NAME= "PLB_SrdWdAddr" SIGNAME= "ppc440_0_splb0_PLB_SrdWdAddr" VECFORMULA= "[0:3]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_Srearbitrate" DIR= "O" MPD_INDEX= "90" NAME= "PLB_Srearbitrate" SIGNAME= "ppc440_0_splb0_PLB_Srearbitrate" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_Sssize" DIR= "O" MPD_INDEX= "91" NAME= "PLB_Sssize" SIGNAME= "ppc440_0_splb0_PLB_Sssize" VECFORMULA= "[0:1]" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_Swait" DIR= "O" MPD_INDEX= "92" NAME= "PLB_Swait" SIGNAME= "ppc440_0_splb0_PLB_Swait" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SwrBTerm" DIR= "O" MPD_INDEX= "93" NAME= "PLB_SwrBTerm" SIGNAME= "ppc440_0_splb0_PLB_SwrBTerm" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SwrComp" DIR= "O" MPD_INDEX= "94" NAME= "PLB_SwrComp" SIGNAME= "ppc440_0_splb0_PLB_SwrComp" />
<PORT DEF_SIGNAME= "ppc440_0_splb0_PLB_SwrDAck" DIR= "O" MPD_INDEX= "95" NAME= "PLB_SwrDAck" SIGNAME= "ppc440_0_splb0_PLB_SwrDAck" />
<PORT DIR= "O" MPD_INDEX= "96" NAME= "Bus_Error_Det" SENSITIVITY= "EDGE_RISING" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "DCR" BUSSTD_PSF= "DCR" IS_VALID= "FALSE" MPD_INDEX= "0" NAME= "SDCR" TYPE= "SLAVE" />
</MODULE>
<MODULE HWVERSION= "2.01.a" INSTANCE= "Ethernet_MAC" IPTYPE= "PERIPHERAL" MHS_INDEX= "13" MODCLASS= "PERIPHERAL" MODTYPE= "xps_ethernetlite" >
<DESCRIPTION TYPE= "SHORT" > XPS 10/100 Ethernet MAC Lite</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > 'IEEE Std. 802.3 MII interface MAC with PLBV46 interface, lightweight implementation'</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_ethernetlite_v2_01_a/doc/xps_ethernetlite.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER MPD_INDEX= "0" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_BASEADDR" TYPE= "std_logic_vector" VALUE= "0x81000000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "2" NAME= "C_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0x8100ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "3" NAME= "C_SPLB_CLK_PERIOD_PS" TYPE= "INTEGER" VALUE= "8000" >
<DESCRIPTION > Clock Period of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "5" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_SPLB_SUPPORT_BURSTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave is Capable of Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_DUPLEX" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Duplex Mode </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "12" NAME= "C_TX_PING_PONG" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Include Second Transmitter Buffer </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_RX_PING_PONG" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > Include Second Receiver Buffer </DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2164260864" BASENAME= "C_BASEADDR" BASEVALUE= "0x81000000" HIGHDECIMAL= "2164326399" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8100ffff" MEMTYPE= "REGISTER" MINSIZE= "0x02000" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "0" NAME= "PHY_tx_clk" SIGNAME= "fpga_0_Ethernet_MAC_PHY_tx_clk_pin" >
<DESCRIPTION > Ethernet Transmit Clock Input</DESCRIPTION>
</PORT>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "1" NAME= "PHY_rx_clk" SIGNAME= "fpga_0_Ethernet_MAC_PHY_rx_clk_pin" >
<DESCRIPTION > Ethernet Receive Clock Input</DESCRIPTION>
</PORT>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "2" MPD_INDEX= "2" NAME= "PHY_crs" SIGNAME= "fpga_0_Ethernet_MAC_PHY_crs_pin" >
<DESCRIPTION > Ethernet Carrier Sense Input</DESCRIPTION>
</PORT>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "3" MPD_INDEX= "3" NAME= "PHY_dv" SIGNAME= "fpga_0_Ethernet_MAC_PHY_dv_pin" >
<DESCRIPTION > Ethernet Receive Data Valid</DESCRIPTION>
</PORT>
<PORT DIR= "I" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "4" MPD_INDEX= "4" MSB= "3" NAME= "PHY_rx_data" SIGNAME= "fpga_0_Ethernet_MAC_PHY_rx_data_pin" VECFORMULA= "[3:0]" >
<DESCRIPTION > Ethernet Receive Data Input</DESCRIPTION>
</PORT>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "5" MPD_INDEX= "5" NAME= "PHY_col" SIGNAME= "fpga_0_Ethernet_MAC_PHY_col_pin" >
<DESCRIPTION > Ethernet Collision Input</DESCRIPTION>
</PORT>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "6" MPD_INDEX= "6" NAME= "PHY_rx_er" SIGNAME= "fpga_0_Ethernet_MAC_PHY_rx_er_pin" >
<DESCRIPTION > Ethernet Receive Error Input</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "7" MPD_INDEX= "7" NAME= "PHY_rst_n" SIGNAME= "fpga_0_Ethernet_MAC_PHY_rst_n_pin" >
<DESCRIPTION > Ethernet PHY Reset</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "8" MPD_INDEX= "8" NAME= "PHY_tx_en" SIGNAME= "fpga_0_Ethernet_MAC_PHY_tx_en_pin" >
<DESCRIPTION > Ethernet Transmit Enable</DESCRIPTION>
</PORT>
<PORT DIR= "O" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "9" MPD_INDEX= "9" MSB= "3" NAME= "PHY_tx_data" SIGNAME= "fpga_0_Ethernet_MAC_PHY_tx_data_pin" VECFORMULA= "[3:0]" >
<DESCRIPTION > Ethernet Transmit Data Output</DESCRIPTION>
</PORT>
<PORT DIR= "O" MPD_INDEX= "10" NAME= "IP2INTC_Irpt" SENSITIVITY= "EDGE_RISING" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "11" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "12" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "13" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:(C_SPLB_AWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "14" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "15" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "16" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "17" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "18" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "19" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "20" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "21" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "22" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "23" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "24" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "25" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "26" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "27" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "28" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "29" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "30" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "31" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "32" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "33" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "34" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "35" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "36" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "37" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "38" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "39" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "40" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "41" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "42" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "43" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "44" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "45" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "46" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "47" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "48" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "49" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "50" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "51" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "52" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
</MODULE>
<MODULE HWVERSION= "2.00.b" INSTANCE= "DDR2_SDRAM" IPTYPE= "PERIPHERAL" MHS_INDEX= "14" MODCLASS= "MEMORY_CNTLR" MODTYPE= "ppc440mc_ddr2" >
<DESCRIPTION TYPE= "SHORT" > PowerPC 440 DDR2 Memory Controller</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > A wrapper to instantiate the PowerPC 440 DDR2 Memory Controller</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/ppc440mc_ddr2_v2_00_b/doc/ppc440mc_ddr2.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER MPD_INDEX= "0" NAME= "C_DDR_BAWIDTH" TYPE= "integer" VALUE= "2" >
<DESCRIPTION > Bank Address Width of DDR Memory </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_NUM_CLK_PAIRS" TYPE= "integer" VALUE= "2" >
<DESCRIPTION > Number of Generated DDR Clock Pairs.</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_DDR_DWIDTH" TYPE= "integer" VALUE= "64" >
<DESCRIPTION > Data Bus Width of DDR </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "3" NAME= "C_DDR_CAWIDTH" TYPE= "integer" VALUE= "10" >
<DESCRIPTION > Column Address Width of DDR Memory </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_NUM_RANKS_MEM" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Number of DDR2 Memory Ranks</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_CS_BITS" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Number of Chip Select in DDR2 Memory Rank (a.k.a log2C_NUM_RANKS_MEM)</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_DDR_DM_WIDTH" TYPE= "integer" VALUE= "8" >
<DESCRIPTION > DDR2 Data Mask Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "7" NAME= "C_DQ_BITS" TYPE= "integer" VALUE= "8" >
<DESCRIPTION > C_DQ_BITS</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "8" NAME= "C_DDR2_ODT_WIDTH" TYPE= "integer" VALUE= "2" >
<DESCRIPTION > DDR2 On Die Termination Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_DDR2_ADDT_LAT" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Additive Latency of DDR2 Memory </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_INCLUDE_ECC_SUPPORT" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Support ECC Logic </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "11" NAME= "C_DDR2_ODT_SETTING" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Setting for On Die Termination</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "12" NAME= "C_DQS_BITS" TYPE= "integer" VALUE= "3" >
<DESCRIPTION > DQS Bit Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "13" NAME= "C_DDR_DQS_WIDTH" TYPE= "integer" VALUE= "8" >
<DESCRIPTION > DDR2 Strobe Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "14" NAME= "C_DDR_RAWIDTH" TYPE= "integer" VALUE= "13" >
<DESCRIPTION > Row Address Width of DDR Memory </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "15" NAME= "C_DDR_BURST_LENGTH" TYPE= "integer" VALUE= "4" >
<DESCRIPTION > Burst Length of DDR Memory</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "16" NAME= "C_DDR_CAS_LAT" TYPE= "integer" VALUE= "4" >
<DESCRIPTION > CAS Latency of DDR Memory </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "17" NAME= "C_REG_DIMM" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Include Support for Registered DIMMs.</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "18" NAME= "C_MIB_MC_CLOCK_RATIO" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Clock Ratio between CPMINTERCONNECTCLK to DDR2 Clock</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "MEMORY" CHANGEDBY= "USER" MPD_INDEX= "19" NAME= "C_MEM_BASEADDR" VALUE= "0x00000000" >
<DESCRIPTION > Memory Base Address </DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "MEMORY" CHANGEDBY= "USER" MPD_INDEX= "20" NAME= "C_MEM_HIGHADDR" VALUE= "0x0fffffff" >
<DESCRIPTION > Memory High Address </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "21" NAME= "C_DDR_TREFI" TYPE= "integer" VALUE= "3900" >
<DESCRIPTION > TREFI of DDR </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "22" NAME= "C_DDR_TRAS" TYPE= "integer" VALUE= "40000" >
<DESCRIPTION > TRAS of DDR </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "23" NAME= "C_DDR_TRCD" TYPE= "integer" VALUE= "15000" >
<DESCRIPTION > TRCD of DDR </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "24" NAME= "C_DDR_TRFC" TYPE= "integer" VALUE= "75000" >
<DESCRIPTION > TRFC of DDR </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "25" NAME= "C_DDR_TRP" TYPE= "integer" VALUE= "15000" >
<DESCRIPTION > TRP of DDR </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "26" NAME= "C_DDR_TRTP" TYPE= "integer" VALUE= "7500" >
<DESCRIPTION > TRTP of DDR </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "27" NAME= "C_DDR_TWR" TYPE= "integer" VALUE= "15000" >
<DESCRIPTION > TWR of DDR </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "28" NAME= "C_DDR_TWTR" TYPE= "integer" VALUE= "7500" >
<DESCRIPTION > TWTR of DDR </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "29" NAME= "C_MC_MIBCLK_PERIOD_PS" TYPE= "integer" VALUE= "8000" >
<DESCRIPTION > Clock Period(ps) of MIB Clock</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "30" NAME= "C_IDEL_HIGH_PERF" TYPE= "string" VALUE= "TRUE" >
<DESCRIPTION > IDELAY High Performance Mode</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "31" NAME= "C_SIM_ONLY" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > SKip 200us Power-up Time for Simulation</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "32" NAME= "C_NUM_IDELAYCTRL" TYPE= "integer" VALUE= "3" >
<DESCRIPTION > Number of IDELAYCTRL Primitives (V4 only) that are explicitly instantiated</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "33" NAME= "C_IDELAYCTRL_LOC" TYPE= "string" VALUE= "IDELAYCTRL_X0Y6-IDELAYCTRL_X0Y2-IDELAYCTRL_X0Y1" >
<DESCRIPTION > LOC Constraints of IDELAYCTRL Primitive</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "34" NAME= "C_READ_DATA_PIPELINE" TYPE= "integer" VALUE= "0" >
<DESCRIPTION > Read Data Pipeline</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "35" NAME= "C_DQS_IO_COL" VALUE= "0b000000000000000000" >
<DESCRIPTION > IO Column Location of DQS Groups</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "36" NAME= "C_DQ_IO_MS" VALUE= "0b000000000111010100111101000011110001111000101110110000111100000110111100" >
<DESCRIPTION > Master Slave Location of DQ IO</DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "0" BASENAME= "C_MEM_BASEADDR" BASEVALUE= "0x00000000" HIGHDECIMAL= "268435455" HIGHNAME= "C_MEM_HIGHADDR" HIGHVALUE= "0x0fffffff" IS_CACHEABLE= "TRUE" MEMTYPE= "MEMORY" SIZE= "268435456" SIZEABRV= "256M" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "PPC440MC" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "0" NAME= "mc_mibclk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "1" NAME= "mi_mcclk90" SIGIS= "CLK" SIGNAME= "clk_125_0000MHz90PLL0_ADJUST" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "2" MPD_INDEX= "2" NAME= "mi_mcreset" SIGIS= "RST" SIGNAME= "sys_bus_reset" />
<PORT CLKFREQUENCY= "62500000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "3" MPD_INDEX= "3" NAME= "mi_mcclkdiv2" SIGIS= "CLK" SIGNAME= "clk_62_5000MHzPLL0_ADJUST" />
<PORT CLKFREQUENCY= "200000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "4" MPD_INDEX= "4" NAME= "mi_mcclk_200" SIGIS= "CLK" SIGNAME= "clk_200_0000MHz" />
<PORT DIR= "IO" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "5" MPD_INDEX= "17" MSB= "63" NAME= "DDR2_DQ" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_DQ_pin" VECFORMULA= "[(C_DDR_DWIDTH-1):0]" />
<PORT DIR= "IO" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "6" MPD_INDEX= "18" MSB= "7" NAME= "DDR2_DQS" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_DQS_pin" VECFORMULA= "[(C_DDR_DQS_WIDTH-1):0]" />
<PORT DIR= "IO" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "7" MPD_INDEX= "19" MSB= "7" NAME= "DDR2_DQS_N" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_DQS_N_pin" VECFORMULA= "[(C_DDR_DQS_WIDTH-1):0]" />
<PORT DIR= "O" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "8" MPD_INDEX= "20" MSB= "12" NAME= "DDR2_A" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_A_pin" VECFORMULA= "[(C_DDR_RAWIDTH-1):0]" />
<PORT DIR= "O" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "9" MPD_INDEX= "21" MSB= "1" NAME= "DDR2_BA" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_BA_pin" VECFORMULA= "[(C_DDR_BAWIDTH-1):0]" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "10" MPD_INDEX= "22" NAME= "DDR2_RAS_N" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_RAS_N_pin" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "11" MPD_INDEX= "23" NAME= "DDR2_CAS_N" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CAS_N_pin" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "12" MPD_INDEX= "24" NAME= "DDR2_WE_N" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_WE_N_pin" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "13" MPD_INDEX= "25" NAME= "DDR2_CS_N" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CS_N_pin" VECFORMULA= "[(C_NUM_RANKS_MEM-1):0]" />
<PORT DIR= "O" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "14" MPD_INDEX= "26" MSB= "1" NAME= "DDR2_ODT" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_ODT_pin" VECFORMULA= "[(C_DDR2_ODT_WIDTH-1):0]" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "15" MPD_INDEX= "27" NAME= "DDR2_CKE" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CKE_pin" VECFORMULA= "[(C_NUM_RANKS_MEM-1):0]" />
<PORT DIR= "O" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "16" MPD_INDEX= "28" MSB= "7" NAME= "DDR2_DM" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_DM_pin" VECFORMULA= "[(C_DDR_DM_WIDTH-1):0]" />
<PORT DIR= "O" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "17" MPD_INDEX= "29" MSB= "1" NAME= "DDR2_CK" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CK_pin" VECFORMULA= "[(C_NUM_CLK_PAIRS-1):0]" />
<PORT DIR= "O" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "18" MPD_INDEX= "30" MSB= "1" NAME= "DDR2_CK_N" SIGNAME= "fpga_0_DDR2_SDRAM_DDR2_CK_N_pin" VECFORMULA= "[(C_NUM_CLK_PAIRS-1):0]" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mimcaddressvalid" DIR= "I" MPD_INDEX= "5" NAME= "mi_mcaddressvalid" SIGNAME= "ppc440_0_PPC440MC_mimcaddressvalid" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mimcaddress" DIR= "I" MPD_INDEX= "6" NAME= "mi_mcaddress" SIGNAME= "ppc440_0_PPC440MC_mimcaddress" VECFORMULA= "[0:35]" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mimcbankconflict" DIR= "I" MPD_INDEX= "7" NAME= "mi_mcbankconflict" SIGNAME= "ppc440_0_PPC440MC_mimcbankconflict" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mimcrowconflict" DIR= "I" MPD_INDEX= "8" NAME= "mi_mcrowconflict" SIGNAME= "ppc440_0_PPC440MC_mimcrowconflict" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mimcbyteenable" DIR= "I" MPD_INDEX= "9" NAME= "mi_mcbyteenable" SIGNAME= "ppc440_0_PPC440MC_mimcbyteenable" VECFORMULA= "[0:15]" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mimcwritedata" DIR= "I" MPD_INDEX= "10" NAME= "mi_mcwritedata" SIGNAME= "ppc440_0_PPC440MC_mimcwritedata" VECFORMULA= "[0:127]" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mimcreadnotwrite" DIR= "I" MPD_INDEX= "11" NAME= "mi_mcreadnotwrite" SIGNAME= "ppc440_0_PPC440MC_mimcreadnotwrite" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mimcwritedatavalid" DIR= "I" MPD_INDEX= "12" NAME= "mi_mcwritedatavalid" SIGNAME= "ppc440_0_PPC440MC_mimcwritedatavalid" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mcmiaddrreadytoaccept" DIR= "O" MPD_INDEX= "13" NAME= "mc_miaddrreadytoaccept" SIGNAME= "ppc440_0_PPC440MC_mcmiaddrreadytoaccept" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mcmireaddata" DIR= "O" MPD_INDEX= "14" NAME= "mc_mireaddata" SIGNAME= "ppc440_0_PPC440MC_mcmireaddata" VECFORMULA= "[0:127]" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mcmireaddataerr" DIR= "O" MPD_INDEX= "15" NAME= "mc_mireaddataerr" SIGNAME= "ppc440_0_PPC440MC_mcmireaddataerr" />
<PORT BUS= "PPC440MC" DEF_SIGNAME= "ppc440_0_PPC440MC_mcmireaddatavalid" DIR= "O" MPD_INDEX= "16" NAME= "mc_mireaddatavalid" SIGNAME= "ppc440_0_PPC440MC_mcmireaddatavalid" />
<BUSINTERFACE BUSNAME= "ppc440_0_PPC440MC" BUSSTD= "XIL" BUSSTD_PSF= "XIL_PPC440MC" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "PPC440MC" TYPE= "TARGET" />
</MODULE>
<MODULE HWVERSION= "1.01.a" INSTANCE= "SysACE_CompactFlash" IPTYPE= "PERIPHERAL" MHS_INDEX= "15" MODCLASS= "PERIPHERAL" MODTYPE= "xps_sysace" >
<DESCRIPTION TYPE= "SHORT" > XPS System ACE Interface Controller(Compact Flash)</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > Interface between the PLBV46 and the Microprocessor Interface (MPU) of the System ACE Compact Flash solution peripheral</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_sysace_v1_01_a/doc/xps_sysace.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "0" NAME= "C_BASEADDR" TYPE= "std_logic_vector" VALUE= "0x83600000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_HIGHADDR" TYPE= "std_logic_vector" VALUE= "0x8360ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_MEM_WIDTH" TYPE= "INTEGER" VALUE= "16" >
<DESCRIPTION > Width of System ACE Data Bus </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "3" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "4" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "6" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "7" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_SPLB_SUPPORT_BURSTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave is Capable of Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2204106752" BASENAME= "C_BASEADDR" BASEVALUE= "0x83600000" HIGHDECIMAL= "2204172287" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8360ffff" MEMTYPE= "REGISTER" MINSIZE= "0x80" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "O" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "0" MPD_INDEX= "42" MSB= "6" NAME= "SysACE_MPA" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_MPA_pin" VECFORMULA= "[6:0]" >
<DESCRIPTION > Address Input</DESCRIPTION>
</PORT>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "43" NAME= "SysACE_CLK" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_CLK_pin" >
<DESCRIPTION > Clock Input</DESCRIPTION>
</PORT>
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "2" MPD_INDEX= "44" NAME= "SysACE_MPIRQ" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_MPIRQ_pin" >
<DESCRIPTION > Active high Interrupt Output</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "3" MPD_INDEX= "48" NAME= "SysACE_CEN" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_CEN_pin" >
<DESCRIPTION > Active LOW Chip Enable</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "4" MPD_INDEX= "49" NAME= "SysACE_OEN" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_OEN_pin" >
<DESCRIPTION > Active LOW Output Enable</DESCRIPTION>
</PORT>
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "5" MPD_INDEX= "50" NAME= "SysACE_WEN" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_WEN_pin" >
<DESCRIPTION > Active LOW Write Enable</DESCRIPTION>
</PORT>
<PORT DIR= "IO" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "6" MPD_INDEX= "52" MSB= "15" NAME= "SysACE_MPD" SIGNAME= "fpga_0_SysACE_CompactFlash_SysACE_MPD_pin" VECFORMULA= "[(C_MEM_WIDTH-1):0]" >
<DESCRIPTION > Data Input/Output</DESCRIPTION>
</PORT>
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "1" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "2" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "3" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "4" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "5" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "6" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "7" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "8" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "9" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "10" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "11" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "12" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "13" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "14" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "15" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "16" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "17" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "18" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "19" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "20" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "21" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "22" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "23" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "24" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "25" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "26" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "27" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "28" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "29" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "30" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "31" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "32" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "33" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "34" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "35" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "36" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "37" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "38" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "39" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "40" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "41" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT DIR= "I" MPD_INDEX= "45" NAME= "SysACE_MPD_I" SIGNAME= "__NOC__" VECFORMULA= "[(C_MEM_WIDTH-1):0]" />
<PORT DIR= "O" MPD_INDEX= "46" NAME= "SysACE_MPD_O" SIGNAME= "__NOC__" VECFORMULA= "[(C_MEM_WIDTH-1):0]" />
<PORT DIR= "O" MPD_INDEX= "47" NAME= "SysACE_MPD_T" SIGNAME= "__NOC__" VECFORMULA= "[(C_MEM_WIDTH-1):0]" />
<PORT DIR= "O" MPD_INDEX= "51" NAME= "SysACE_IRQ" SENSITIVITY= "LEVEL_HIGH" SIGIS= "INTERRUPT" SIGNAME= "__NOC__" />
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
</MODULE>
<MODULE HWVERSION= "3.01.a" INSTANCE= "clock_generator_0" IPTYPE= "PERIPHERAL" MHS_INDEX= "16" MODCLASS= "IP" MODTYPE= "clock_generator" >
<DESCRIPTION TYPE= "SHORT" > Clock Generator</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > Clock generator for processor system.</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/clock_generator_v3_01_a/doc/clock_generator.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER MPD_INDEX= "0" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" />
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "1" NAME= "C_SPEEDGRADE" TYPE= "STRING" VALUE= "-1" />
<PARAMETER MPD_INDEX= "2" NAME= "C_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "3" NAME= "C_CLK_GEN" TYPE= "STRING" VALUE= "update" />
<PARAMETER MPD_INDEX= "4" NAME= "C_CLKOUT0_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "5" NAME= "C_CLKOUT0_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "6" NAME= "C_CLKOUT1_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "7" NAME= "C_CLKOUT1_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "8" NAME= "C_CLKOUT2_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "9" NAME= "C_CLKOUT2_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "10" NAME= "C_CLKOUT3_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "11" NAME= "C_CLKOUT3_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "12" NAME= "C_CLKOUT4_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "13" NAME= "C_CLKOUT4_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "14" NAME= "C_CLKOUT5_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "15" NAME= "C_CLKOUT5_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "16" NAME= "C_CLKOUT6_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "17" NAME= "C_CLKOUT6_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "18" NAME= "C_CLKOUT7_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "19" NAME= "C_CLKOUT7_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "20" NAME= "C_CLKOUT8_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "21" NAME= "C_CLKOUT8_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "22" NAME= "C_CLKOUT9_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "23" NAME= "C_CLKOUT9_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "24" NAME= "C_CLKOUT10_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "25" NAME= "C_CLKOUT10_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "26" NAME= "C_CLKOUT11_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "27" NAME= "C_CLKOUT11_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "28" NAME= "C_CLKOUT12_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "29" NAME= "C_CLKOUT12_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "30" NAME= "C_CLKOUT13_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "31" NAME= "C_CLKOUT13_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "32" NAME= "C_CLKOUT14_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "33" NAME= "C_CLKOUT14_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "34" NAME= "C_CLKOUT15_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "35" NAME= "C_CLKOUT15_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "36" NAME= "C_CLKFBOUT_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "37" NAME= "C_CLKFBOUT_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "38" NAME= "C_PSDONE_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "39" NAME= "C_PLL0_DIVCLK_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "40" NAME= "C_PLL0_CLKFBOUT_MULT" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "41" NAME= "C_PLL0_CLKFBOUT_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "42" NAME= "C_PLL0_CLKIN1_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "43" NAME= "C_PLL0_CLKOUT0_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "44" NAME= "C_PLL0_CLKOUT0_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "45" NAME= "C_PLL0_CLKOUT0_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "46" NAME= "C_PLL0_CLKOUT1_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "47" NAME= "C_PLL0_CLKOUT1_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "48" NAME= "C_PLL0_CLKOUT1_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "49" NAME= "C_PLL0_CLKOUT2_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "50" NAME= "C_PLL0_CLKOUT2_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "51" NAME= "C_PLL0_CLKOUT2_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "52" NAME= "C_PLL0_CLKOUT3_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "53" NAME= "C_PLL0_CLKOUT3_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "54" NAME= "C_PLL0_CLKOUT3_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "55" NAME= "C_PLL0_CLKOUT4_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "56" NAME= "C_PLL0_CLKOUT4_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "57" NAME= "C_PLL0_CLKOUT4_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "58" NAME= "C_PLL0_CLKOUT5_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "59" NAME= "C_PLL0_CLKOUT5_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "60" NAME= "C_PLL0_CLKOUT5_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "61" NAME= "C_PLL0_BANDWIDTH" TYPE= "STRING" VALUE= "OPTIMIZED" />
<PARAMETER MPD_INDEX= "62" NAME= "C_PLL0_COMPENSATION" TYPE= "STRING" VALUE= "SYSTEM_SYNCHRONOUS" />
<PARAMETER MPD_INDEX= "63" NAME= "C_PLL0_REF_JITTER" TYPE= "REAL" VALUE= "0.100000" />
<PARAMETER MPD_INDEX= "64" NAME= "C_PLL0_RESET_ON_LOSS_OF_LOCK" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "65" NAME= "C_PLL0_RST_DEASSERT_CLK" TYPE= "STRING" VALUE= "CLKIN1" />
<PARAMETER MPD_INDEX= "66" NAME= "C_PLL0_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "67" NAME= "C_PLL0_FAMILY" TYPE= "STRING" VALUE= "virtex5" />
<PARAMETER MPD_INDEX= "68" NAME= "C_PLL0_CLKOUT0_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "69" NAME= "C_PLL0_CLKOUT1_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "70" NAME= "C_PLL0_CLKOUT2_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "71" NAME= "C_PLL0_CLKOUT3_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "72" NAME= "C_PLL0_CLKOUT4_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "73" NAME= "C_PLL0_CLKOUT5_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "74" NAME= "C_PLL0_CLKFBOUT_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "75" NAME= "C_PLL0_CLKIN1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "76" NAME= "C_PLL0_CLKFBOUT_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "77" NAME= "C_PLL0_CLKOUT0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "78" NAME= "C_PLL0_CLKOUT1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "79" NAME= "C_PLL0_CLKOUT2_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "80" NAME= "C_PLL0_CLKOUT3_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "81" NAME= "C_PLL0_CLKOUT4_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "82" NAME= "C_PLL0_CLKOUT5_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "83" NAME= "C_PLL0_CLKIN1_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "84" NAME= "C_PLL0_CLKIN1_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "85" NAME= "C_PLL0_CLKFBIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "86" NAME= "C_PLL0_CLKFBIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "87" NAME= "C_PLL0_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "88" NAME= "C_PLL1_DIVCLK_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "89" NAME= "C_PLL1_CLKFBOUT_MULT" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "90" NAME= "C_PLL1_CLKFBOUT_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "91" NAME= "C_PLL1_CLKIN1_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "92" NAME= "C_PLL1_CLKOUT0_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "93" NAME= "C_PLL1_CLKOUT0_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "94" NAME= "C_PLL1_CLKOUT0_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "95" NAME= "C_PLL1_CLKOUT1_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "96" NAME= "C_PLL1_CLKOUT1_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "97" NAME= "C_PLL1_CLKOUT1_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "98" NAME= "C_PLL1_CLKOUT2_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "99" NAME= "C_PLL1_CLKOUT2_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "100" NAME= "C_PLL1_CLKOUT2_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "101" NAME= "C_PLL1_CLKOUT3_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "102" NAME= "C_PLL1_CLKOUT3_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "103" NAME= "C_PLL1_CLKOUT3_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "104" NAME= "C_PLL1_CLKOUT4_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "105" NAME= "C_PLL1_CLKOUT4_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "106" NAME= "C_PLL1_CLKOUT4_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "107" NAME= "C_PLL1_CLKOUT5_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "108" NAME= "C_PLL1_CLKOUT5_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "109" NAME= "C_PLL1_CLKOUT5_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "110" NAME= "C_PLL1_BANDWIDTH" TYPE= "STRING" VALUE= "OPTIMIZED" />
<PARAMETER MPD_INDEX= "111" NAME= "C_PLL1_COMPENSATION" TYPE= "STRING" VALUE= "SYSTEM_SYNCHRONOUS" />
<PARAMETER MPD_INDEX= "112" NAME= "C_PLL1_REF_JITTER" TYPE= "REAL" VALUE= "0.100000" />
<PARAMETER MPD_INDEX= "113" NAME= "C_PLL1_RESET_ON_LOSS_OF_LOCK" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "114" NAME= "C_PLL1_RST_DEASSERT_CLK" TYPE= "STRING" VALUE= "CLKIN1" />
<PARAMETER MPD_INDEX= "115" NAME= "C_PLL1_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "116" NAME= "C_PLL1_FAMILY" TYPE= "STRING" VALUE= "virtex5" />
<PARAMETER MPD_INDEX= "117" NAME= "C_PLL1_CLKOUT0_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "118" NAME= "C_PLL1_CLKOUT1_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "119" NAME= "C_PLL1_CLKOUT2_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "120" NAME= "C_PLL1_CLKOUT3_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "121" NAME= "C_PLL1_CLKOUT4_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "122" NAME= "C_PLL1_CLKOUT5_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "123" NAME= "C_PLL1_CLKFBOUT_DESKEW_ADJUST" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "124" NAME= "C_PLL1_CLKIN1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "125" NAME= "C_PLL1_CLKFBOUT_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "126" NAME= "C_PLL1_CLKOUT0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "127" NAME= "C_PLL1_CLKOUT1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "128" NAME= "C_PLL1_CLKOUT2_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "129" NAME= "C_PLL1_CLKOUT3_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "130" NAME= "C_PLL1_CLKOUT4_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "131" NAME= "C_PLL1_CLKOUT5_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "132" NAME= "C_PLL1_CLKIN1_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "133" NAME= "C_PLL1_CLKIN1_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "134" NAME= "C_PLL1_CLKFBIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "135" NAME= "C_PLL1_CLKFBIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "136" NAME= "C_PLL1_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "137" NAME= "C_DCM0_DFS_FREQUENCY_MODE" TYPE= "STRING" VALUE= "LOW" />
<PARAMETER MPD_INDEX= "138" NAME= "C_DCM0_DLL_FREQUENCY_MODE" TYPE= "STRING" VALUE= "LOW" />
<PARAMETER MPD_INDEX= "139" NAME= "C_DCM0_DUTY_CYCLE_CORRECTION" TYPE= "BOOLEAN" VALUE= "true" />
<PARAMETER MPD_INDEX= "140" NAME= "C_DCM0_CLKIN_DIVIDE_BY_2" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "141" NAME= "C_DCM0_CLK_FEEDBACK" TYPE= "STRING" VALUE= "1X" />
<PARAMETER MPD_INDEX= "142" NAME= "C_DCM0_CLKOUT_PHASE_SHIFT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "143" NAME= "C_DCM0_DSS_MODE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "144" NAME= "C_DCM0_STARTUP_WAIT" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "145" NAME= "C_DCM0_PHASE_SHIFT" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "146" NAME= "C_DCM0_CLKFX_MULTIPLY" TYPE= "INTEGER" VALUE= "4" />
<PARAMETER MPD_INDEX= "147" NAME= "C_DCM0_CLKFX_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "148" NAME= "C_DCM0_CLKDV_DIVIDE" TYPE= "REAL" VALUE= "2.000000" />
<PARAMETER MPD_INDEX= "149" NAME= "C_DCM0_CLKIN_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "150" NAME= "C_DCM0_DESKEW_ADJUST" TYPE= "STRING" VALUE= "SYSTEM_SYNCHRONOUS" />
<PARAMETER MPD_INDEX= "151" NAME= "C_DCM0_CLKIN_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "152" NAME= "C_DCM0_CLKFB_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "153" NAME= "C_DCM0_CLK0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "154" NAME= "C_DCM0_CLK90_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "155" NAME= "C_DCM0_CLK180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "156" NAME= "C_DCM0_CLK270_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "157" NAME= "C_DCM0_CLKDV_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "158" NAME= "C_DCM0_CLKDV180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "159" NAME= "C_DCM0_CLK2X_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "160" NAME= "C_DCM0_CLK2X180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "161" NAME= "C_DCM0_CLKFX_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "162" NAME= "C_DCM0_CLKFX180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "163" NAME= "C_DCM0_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "164" NAME= "C_DCM0_FAMILY" TYPE= "STRING" VALUE= "virtex5" />
<PARAMETER MPD_INDEX= "165" NAME= "C_DCM0_CLKIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "166" NAME= "C_DCM0_CLKIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "167" NAME= "C_DCM0_CLKFB_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "168" NAME= "C_DCM0_CLKFB_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "169" NAME= "C_DCM0_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "170" NAME= "C_DCM1_DFS_FREQUENCY_MODE" TYPE= "STRING" VALUE= "LOW" />
<PARAMETER MPD_INDEX= "171" NAME= "C_DCM1_DLL_FREQUENCY_MODE" TYPE= "STRING" VALUE= "LOW" />
<PARAMETER MPD_INDEX= "172" NAME= "C_DCM1_DUTY_CYCLE_CORRECTION" TYPE= "BOOLEAN" VALUE= "true" />
<PARAMETER MPD_INDEX= "173" NAME= "C_DCM1_CLKIN_DIVIDE_BY_2" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "174" NAME= "C_DCM1_CLK_FEEDBACK" TYPE= "STRING" VALUE= "1X" />
<PARAMETER MPD_INDEX= "175" NAME= "C_DCM1_CLKOUT_PHASE_SHIFT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "176" NAME= "C_DCM1_DSS_MODE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "177" NAME= "C_DCM1_STARTUP_WAIT" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "178" NAME= "C_DCM1_PHASE_SHIFT" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "179" NAME= "C_DCM1_CLKFX_MULTIPLY" TYPE= "INTEGER" VALUE= "4" />
<PARAMETER MPD_INDEX= "180" NAME= "C_DCM1_CLKFX_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "181" NAME= "C_DCM1_CLKDV_DIVIDE" TYPE= "REAL" VALUE= "2.000000" />
<PARAMETER MPD_INDEX= "182" NAME= "C_DCM1_CLKIN_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "183" NAME= "C_DCM1_DESKEW_ADJUST" TYPE= "STRING" VALUE= "SYSTEM_SYNCHRONOUS" />
<PARAMETER MPD_INDEX= "184" NAME= "C_DCM1_CLKIN_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "185" NAME= "C_DCM1_CLKFB_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "186" NAME= "C_DCM1_CLK0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "187" NAME= "C_DCM1_CLK90_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "188" NAME= "C_DCM1_CLK180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "189" NAME= "C_DCM1_CLK270_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "190" NAME= "C_DCM1_CLKDV_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "191" NAME= "C_DCM1_CLKDV180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "192" NAME= "C_DCM1_CLK2X_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "193" NAME= "C_DCM1_CLK2X180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "194" NAME= "C_DCM1_CLKFX_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "195" NAME= "C_DCM1_CLKFX180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "196" NAME= "C_DCM1_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "197" NAME= "C_DCM1_FAMILY" TYPE= "STRING" VALUE= "virtex5" />
<PARAMETER MPD_INDEX= "198" NAME= "C_DCM1_CLKIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "199" NAME= "C_DCM1_CLKIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "200" NAME= "C_DCM1_CLKFB_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "201" NAME= "C_DCM1_CLKFB_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "202" NAME= "C_DCM1_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "203" NAME= "C_DCM2_DFS_FREQUENCY_MODE" TYPE= "STRING" VALUE= "LOW" />
<PARAMETER MPD_INDEX= "204" NAME= "C_DCM2_DLL_FREQUENCY_MODE" TYPE= "STRING" VALUE= "LOW" />
<PARAMETER MPD_INDEX= "205" NAME= "C_DCM2_DUTY_CYCLE_CORRECTION" TYPE= "BOOLEAN" VALUE= "true" />
<PARAMETER MPD_INDEX= "206" NAME= "C_DCM2_CLKIN_DIVIDE_BY_2" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "207" NAME= "C_DCM2_CLK_FEEDBACK" TYPE= "STRING" VALUE= "1X" />
<PARAMETER MPD_INDEX= "208" NAME= "C_DCM2_CLKOUT_PHASE_SHIFT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "209" NAME= "C_DCM2_DSS_MODE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "210" NAME= "C_DCM2_STARTUP_WAIT" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "211" NAME= "C_DCM2_PHASE_SHIFT" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "212" NAME= "C_DCM2_CLKFX_MULTIPLY" TYPE= "INTEGER" VALUE= "4" />
<PARAMETER MPD_INDEX= "213" NAME= "C_DCM2_CLKFX_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "214" NAME= "C_DCM2_CLKDV_DIVIDE" TYPE= "REAL" VALUE= "2.000000" />
<PARAMETER MPD_INDEX= "215" NAME= "C_DCM2_CLKIN_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "216" NAME= "C_DCM2_DESKEW_ADJUST" TYPE= "STRING" VALUE= "SYSTEM_SYNCHRONOUS" />
<PARAMETER MPD_INDEX= "217" NAME= "C_DCM2_CLKIN_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "218" NAME= "C_DCM2_CLKFB_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "219" NAME= "C_DCM2_CLK0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "220" NAME= "C_DCM2_CLK90_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "221" NAME= "C_DCM2_CLK180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "222" NAME= "C_DCM2_CLK270_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "223" NAME= "C_DCM2_CLKDV_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "224" NAME= "C_DCM2_CLKDV180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "225" NAME= "C_DCM2_CLK2X_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "226" NAME= "C_DCM2_CLK2X180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "227" NAME= "C_DCM2_CLKFX_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "228" NAME= "C_DCM2_CLKFX180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "229" NAME= "C_DCM2_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "230" NAME= "C_DCM2_FAMILY" TYPE= "STRING" VALUE= "virtex5" />
<PARAMETER MPD_INDEX= "231" NAME= "C_DCM2_CLKIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "232" NAME= "C_DCM2_CLKIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "233" NAME= "C_DCM2_CLKFB_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "234" NAME= "C_DCM2_CLKFB_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "235" NAME= "C_DCM2_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "236" NAME= "C_DCM3_DFS_FREQUENCY_MODE" TYPE= "STRING" VALUE= "LOW" />
<PARAMETER MPD_INDEX= "237" NAME= "C_DCM3_DLL_FREQUENCY_MODE" TYPE= "STRING" VALUE= "LOW" />
<PARAMETER MPD_INDEX= "238" NAME= "C_DCM3_DUTY_CYCLE_CORRECTION" TYPE= "BOOLEAN" VALUE= "true" />
<PARAMETER MPD_INDEX= "239" NAME= "C_DCM3_CLKIN_DIVIDE_BY_2" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "240" NAME= "C_DCM3_CLK_FEEDBACK" TYPE= "STRING" VALUE= "1X" />
<PARAMETER MPD_INDEX= "241" NAME= "C_DCM3_CLKOUT_PHASE_SHIFT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "242" NAME= "C_DCM3_DSS_MODE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "243" NAME= "C_DCM3_STARTUP_WAIT" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "244" NAME= "C_DCM3_PHASE_SHIFT" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "245" NAME= "C_DCM3_CLKFX_MULTIPLY" TYPE= "INTEGER" VALUE= "4" />
<PARAMETER MPD_INDEX= "246" NAME= "C_DCM3_CLKFX_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "247" NAME= "C_DCM3_CLKDV_DIVIDE" TYPE= "REAL" VALUE= "2.000000" />
<PARAMETER MPD_INDEX= "248" NAME= "C_DCM3_CLKIN_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "249" NAME= "C_DCM3_DESKEW_ADJUST" TYPE= "STRING" VALUE= "SYSTEM_SYNCHRONOUS" />
<PARAMETER MPD_INDEX= "250" NAME= "C_DCM3_CLKIN_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "251" NAME= "C_DCM3_CLKFB_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "252" NAME= "C_DCM3_CLK0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "253" NAME= "C_DCM3_CLK90_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "254" NAME= "C_DCM3_CLK180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "255" NAME= "C_DCM3_CLK270_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "256" NAME= "C_DCM3_CLKDV_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "257" NAME= "C_DCM3_CLKDV180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "258" NAME= "C_DCM3_CLK2X_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "259" NAME= "C_DCM3_CLK2X180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "260" NAME= "C_DCM3_CLKFX_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "261" NAME= "C_DCM3_CLKFX180_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "262" NAME= "C_DCM3_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "263" NAME= "C_DCM3_FAMILY" TYPE= "STRING" VALUE= "virtex5" />
<PARAMETER MPD_INDEX= "264" NAME= "C_DCM3_CLKIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "265" NAME= "C_DCM3_CLKIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "266" NAME= "C_DCM3_CLKFB_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "267" NAME= "C_DCM3_CLKFB_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "268" NAME= "C_DCM3_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "269" NAME= "C_MMCM0_BANDWIDTH" TYPE= "STRING" VALUE= "OPTIMIZED" />
<PARAMETER MPD_INDEX= "270" NAME= "C_MMCM0_CLKFBOUT_MULT_F" TYPE= "REAL" VALUE= "1.000000" />
<PARAMETER MPD_INDEX= "271" NAME= "C_MMCM0_CLKFBOUT_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "272" NAME= "C_MMCM0_CLKFBOUT_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "273" NAME= "C_MMCM0_CLKIN1_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "274" NAME= "C_MMCM0_CLKOUT0_DIVIDE_F" TYPE= "REAL" VALUE= "1.000000" />
<PARAMETER MPD_INDEX= "275" NAME= "C_MMCM0_CLKOUT0_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "276" NAME= "C_MMCM0_CLKOUT0_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "277" NAME= "C_MMCM0_CLKOUT1_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "278" NAME= "C_MMCM0_CLKOUT1_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "279" NAME= "C_MMCM0_CLKOUT1_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "280" NAME= "C_MMCM0_CLKOUT2_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "281" NAME= "C_MMCM0_CLKOUT2_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "282" NAME= "C_MMCM0_CLKOUT2_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "283" NAME= "C_MMCM0_CLKOUT3_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "284" NAME= "C_MMCM0_CLKOUT3_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "285" NAME= "C_MMCM0_CLKOUT3_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "286" NAME= "C_MMCM0_CLKOUT4_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "287" NAME= "C_MMCM0_CLKOUT4_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "288" NAME= "C_MMCM0_CLKOUT4_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "289" NAME= "C_MMCM0_CLKOUT4_CASCADE" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "290" NAME= "C_MMCM0_CLKOUT5_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "291" NAME= "C_MMCM0_CLKOUT5_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "292" NAME= "C_MMCM0_CLKOUT5_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "293" NAME= "C_MMCM0_CLKOUT6_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "294" NAME= "C_MMCM0_CLKOUT6_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "295" NAME= "C_MMCM0_CLKOUT6_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "296" NAME= "C_MMCM0_CLKOUT0_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "297" NAME= "C_MMCM0_CLKOUT1_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "298" NAME= "C_MMCM0_CLKOUT2_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "299" NAME= "C_MMCM0_CLKOUT3_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "300" NAME= "C_MMCM0_CLKOUT4_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "301" NAME= "C_MMCM0_CLKOUT5_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "302" NAME= "C_MMCM0_CLKOUT6_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "303" NAME= "C_MMCM0_COMPENSATION" TYPE= "STRING" VALUE= "ZHOLD" />
<PARAMETER MPD_INDEX= "304" NAME= "C_MMCM0_DIVCLK_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "305" NAME= "C_MMCM0_REF_JITTER1" TYPE= "REAL" VALUE= "0.010000" />
<PARAMETER MPD_INDEX= "306" NAME= "C_MMCM0_CLKIN1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "307" NAME= "C_MMCM0_CLKFBOUT_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "308" NAME= "C_MMCM0_CLOCK_HOLD" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "309" NAME= "C_MMCM0_STARTUP_WAIT" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "310" NAME= "C_MMCM0_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "311" NAME= "C_MMCM0_FAMILY" TYPE= "STRING" VALUE= "virtex6" />
<PARAMETER MPD_INDEX= "312" NAME= "C_MMCM0_CLKOUT0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "313" NAME= "C_MMCM0_CLKOUT1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "314" NAME= "C_MMCM0_CLKOUT2_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "315" NAME= "C_MMCM0_CLKOUT3_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "316" NAME= "C_MMCM0_CLKOUT4_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "317" NAME= "C_MMCM0_CLKOUT5_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "318" NAME= "C_MMCM0_CLKOUT6_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "319" NAME= "C_MMCM0_CLKIN1_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "320" NAME= "C_MMCM0_CLKIN1_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "321" NAME= "C_MMCM0_CLKFBIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "322" NAME= "C_MMCM0_CLKFBIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "323" NAME= "C_MMCM0_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "324" NAME= "C_MMCM1_BANDWIDTH" TYPE= "STRING" VALUE= "OPTIMIZED" />
<PARAMETER MPD_INDEX= "325" NAME= "C_MMCM1_CLKFBOUT_MULT_F" TYPE= "REAL" VALUE= "1.000000" />
<PARAMETER MPD_INDEX= "326" NAME= "C_MMCM1_CLKFBOUT_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "327" NAME= "C_MMCM1_CLKFBOUT_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "328" NAME= "C_MMCM1_CLKIN1_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "329" NAME= "C_MMCM1_CLKOUT0_DIVIDE_F" TYPE= "REAL" VALUE= "1.000000" />
<PARAMETER MPD_INDEX= "330" NAME= "C_MMCM1_CLKOUT0_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "331" NAME= "C_MMCM1_CLKOUT0_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "332" NAME= "C_MMCM1_CLKOUT1_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "333" NAME= "C_MMCM1_CLKOUT1_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "334" NAME= "C_MMCM1_CLKOUT1_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "335" NAME= "C_MMCM1_CLKOUT2_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "336" NAME= "C_MMCM1_CLKOUT2_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "337" NAME= "C_MMCM1_CLKOUT2_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "338" NAME= "C_MMCM1_CLKOUT3_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "339" NAME= "C_MMCM1_CLKOUT3_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "340" NAME= "C_MMCM1_CLKOUT3_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "341" NAME= "C_MMCM1_CLKOUT4_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "342" NAME= "C_MMCM1_CLKOUT4_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "343" NAME= "C_MMCM1_CLKOUT4_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "344" NAME= "C_MMCM1_CLKOUT4_CASCADE" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "345" NAME= "C_MMCM1_CLKOUT5_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "346" NAME= "C_MMCM1_CLKOUT5_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "347" NAME= "C_MMCM1_CLKOUT5_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "348" NAME= "C_MMCM1_CLKOUT6_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "349" NAME= "C_MMCM1_CLKOUT6_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "350" NAME= "C_MMCM1_CLKOUT6_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "351" NAME= "C_MMCM1_CLKOUT0_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "352" NAME= "C_MMCM1_CLKOUT1_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "353" NAME= "C_MMCM1_CLKOUT2_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "354" NAME= "C_MMCM1_CLKOUT3_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "355" NAME= "C_MMCM1_CLKOUT4_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "356" NAME= "C_MMCM1_CLKOUT5_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "357" NAME= "C_MMCM1_CLKOUT6_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "358" NAME= "C_MMCM1_COMPENSATION" TYPE= "STRING" VALUE= "ZHOLD" />
<PARAMETER MPD_INDEX= "359" NAME= "C_MMCM1_DIVCLK_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "360" NAME= "C_MMCM1_REF_JITTER1" TYPE= "REAL" VALUE= "0.010000" />
<PARAMETER MPD_INDEX= "361" NAME= "C_MMCM1_CLKIN1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "362" NAME= "C_MMCM1_CLKFBOUT_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "363" NAME= "C_MMCM1_CLOCK_HOLD" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "364" NAME= "C_MMCM1_STARTUP_WAIT" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "365" NAME= "C_MMCM1_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "366" NAME= "C_MMCM1_FAMILY" TYPE= "STRING" VALUE= "virtex6" />
<PARAMETER MPD_INDEX= "367" NAME= "C_MMCM1_CLKOUT0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "368" NAME= "C_MMCM1_CLKOUT1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "369" NAME= "C_MMCM1_CLKOUT2_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "370" NAME= "C_MMCM1_CLKOUT3_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "371" NAME= "C_MMCM1_CLKOUT4_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "372" NAME= "C_MMCM1_CLKOUT5_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "373" NAME= "C_MMCM1_CLKOUT6_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "374" NAME= "C_MMCM1_CLKIN1_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "375" NAME= "C_MMCM1_CLKIN1_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "376" NAME= "C_MMCM1_CLKFBIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "377" NAME= "C_MMCM1_CLKFBIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "378" NAME= "C_MMCM1_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "379" NAME= "C_MMCM2_BANDWIDTH" TYPE= "STRING" VALUE= "OPTIMIZED" />
<PARAMETER MPD_INDEX= "380" NAME= "C_MMCM2_CLKFBOUT_MULT_F" TYPE= "REAL" VALUE= "1.000000" />
<PARAMETER MPD_INDEX= "381" NAME= "C_MMCM2_CLKFBOUT_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "382" NAME= "C_MMCM2_CLKFBOUT_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "383" NAME= "C_MMCM2_CLKIN1_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "384" NAME= "C_MMCM2_CLKOUT0_DIVIDE_F" TYPE= "REAL" VALUE= "1.000000" />
<PARAMETER MPD_INDEX= "385" NAME= "C_MMCM2_CLKOUT0_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "386" NAME= "C_MMCM2_CLKOUT0_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "387" NAME= "C_MMCM2_CLKOUT1_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "388" NAME= "C_MMCM2_CLKOUT1_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "389" NAME= "C_MMCM2_CLKOUT1_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "390" NAME= "C_MMCM2_CLKOUT2_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "391" NAME= "C_MMCM2_CLKOUT2_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "392" NAME= "C_MMCM2_CLKOUT2_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "393" NAME= "C_MMCM2_CLKOUT3_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "394" NAME= "C_MMCM2_CLKOUT3_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "395" NAME= "C_MMCM2_CLKOUT3_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "396" NAME= "C_MMCM2_CLKOUT4_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "397" NAME= "C_MMCM2_CLKOUT4_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "398" NAME= "C_MMCM2_CLKOUT4_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "399" NAME= "C_MMCM2_CLKOUT4_CASCADE" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "400" NAME= "C_MMCM2_CLKOUT5_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "401" NAME= "C_MMCM2_CLKOUT5_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "402" NAME= "C_MMCM2_CLKOUT5_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "403" NAME= "C_MMCM2_CLKOUT6_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "404" NAME= "C_MMCM2_CLKOUT6_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "405" NAME= "C_MMCM2_CLKOUT6_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "406" NAME= "C_MMCM2_CLKOUT0_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "407" NAME= "C_MMCM2_CLKOUT1_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "408" NAME= "C_MMCM2_CLKOUT2_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "409" NAME= "C_MMCM2_CLKOUT3_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "410" NAME= "C_MMCM2_CLKOUT4_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "411" NAME= "C_MMCM2_CLKOUT5_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "412" NAME= "C_MMCM2_CLKOUT6_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "413" NAME= "C_MMCM2_COMPENSATION" TYPE= "STRING" VALUE= "ZHOLD" />
<PARAMETER MPD_INDEX= "414" NAME= "C_MMCM2_DIVCLK_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "415" NAME= "C_MMCM2_REF_JITTER1" TYPE= "REAL" VALUE= "0.010000" />
<PARAMETER MPD_INDEX= "416" NAME= "C_MMCM2_CLKIN1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "417" NAME= "C_MMCM2_CLKFBOUT_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "418" NAME= "C_MMCM2_CLOCK_HOLD" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "419" NAME= "C_MMCM2_STARTUP_WAIT" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "420" NAME= "C_MMCM2_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "421" NAME= "C_MMCM2_FAMILY" TYPE= "STRING" VALUE= "virtex6" />
<PARAMETER MPD_INDEX= "422" NAME= "C_MMCM2_CLKOUT0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "423" NAME= "C_MMCM2_CLKOUT1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "424" NAME= "C_MMCM2_CLKOUT2_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "425" NAME= "C_MMCM2_CLKOUT3_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "426" NAME= "C_MMCM2_CLKOUT4_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "427" NAME= "C_MMCM2_CLKOUT5_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "428" NAME= "C_MMCM2_CLKOUT6_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "429" NAME= "C_MMCM2_CLKIN1_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "430" NAME= "C_MMCM2_CLKIN1_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "431" NAME= "C_MMCM2_CLKFBIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "432" NAME= "C_MMCM2_CLKFBIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "433" NAME= "C_MMCM2_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "434" NAME= "C_MMCM3_BANDWIDTH" TYPE= "STRING" VALUE= "OPTIMIZED" />
<PARAMETER MPD_INDEX= "435" NAME= "C_MMCM3_CLKFBOUT_MULT_F" TYPE= "REAL" VALUE= "1.000000" />
<PARAMETER MPD_INDEX= "436" NAME= "C_MMCM3_CLKFBOUT_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "437" NAME= "C_MMCM3_CLKFBOUT_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "438" NAME= "C_MMCM3_CLKIN1_PERIOD" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "439" NAME= "C_MMCM3_CLKOUT0_DIVIDE_F" TYPE= "REAL" VALUE= "1.000000" />
<PARAMETER MPD_INDEX= "440" NAME= "C_MMCM3_CLKOUT0_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "441" NAME= "C_MMCM3_CLKOUT0_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "442" NAME= "C_MMCM3_CLKOUT1_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "443" NAME= "C_MMCM3_CLKOUT1_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "444" NAME= "C_MMCM3_CLKOUT1_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "445" NAME= "C_MMCM3_CLKOUT2_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "446" NAME= "C_MMCM3_CLKOUT2_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "447" NAME= "C_MMCM3_CLKOUT2_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "448" NAME= "C_MMCM3_CLKOUT3_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "449" NAME= "C_MMCM3_CLKOUT3_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "450" NAME= "C_MMCM3_CLKOUT3_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "451" NAME= "C_MMCM3_CLKOUT4_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "452" NAME= "C_MMCM3_CLKOUT4_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "453" NAME= "C_MMCM3_CLKOUT4_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "454" NAME= "C_MMCM3_CLKOUT4_CASCADE" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "455" NAME= "C_MMCM3_CLKOUT5_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "456" NAME= "C_MMCM3_CLKOUT5_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "457" NAME= "C_MMCM3_CLKOUT5_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "458" NAME= "C_MMCM3_CLKOUT6_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "459" NAME= "C_MMCM3_CLKOUT6_DUTY_CYCLE" TYPE= "REAL" VALUE= "0.500000" />
<PARAMETER MPD_INDEX= "460" NAME= "C_MMCM3_CLKOUT6_PHASE" TYPE= "REAL" VALUE= "0.000000" />
<PARAMETER MPD_INDEX= "461" NAME= "C_MMCM3_CLKOUT0_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "462" NAME= "C_MMCM3_CLKOUT1_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "463" NAME= "C_MMCM3_CLKOUT2_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "464" NAME= "C_MMCM3_CLKOUT3_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "465" NAME= "C_MMCM3_CLKOUT4_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "466" NAME= "C_MMCM3_CLKOUT5_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "467" NAME= "C_MMCM3_CLKOUT6_USE_FINE_PS" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "468" NAME= "C_MMCM3_COMPENSATION" TYPE= "STRING" VALUE= "ZHOLD" />
<PARAMETER MPD_INDEX= "469" NAME= "C_MMCM3_DIVCLK_DIVIDE" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "470" NAME= "C_MMCM3_REF_JITTER1" TYPE= "REAL" VALUE= "0.010000" />
<PARAMETER MPD_INDEX= "471" NAME= "C_MMCM3_CLKIN1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "472" NAME= "C_MMCM3_CLKFBOUT_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "473" NAME= "C_MMCM3_CLOCK_HOLD" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "474" NAME= "C_MMCM3_STARTUP_WAIT" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "475" NAME= "C_MMCM3_EXT_RESET_HIGH" TYPE= "INTEGER" VALUE= "1" />
<PARAMETER MPD_INDEX= "476" NAME= "C_MMCM3_FAMILY" TYPE= "STRING" VALUE= "virtex6" />
<PARAMETER MPD_INDEX= "477" NAME= "C_MMCM3_CLKOUT0_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "478" NAME= "C_MMCM3_CLKOUT1_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "479" NAME= "C_MMCM3_CLKOUT2_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "480" NAME= "C_MMCM3_CLKOUT3_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "481" NAME= "C_MMCM3_CLKOUT4_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "482" NAME= "C_MMCM3_CLKOUT5_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "483" NAME= "C_MMCM3_CLKOUT6_BUF" TYPE= "BOOLEAN" VALUE= "false" />
<PARAMETER MPD_INDEX= "484" NAME= "C_MMCM3_CLKIN1_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "485" NAME= "C_MMCM3_CLKIN1_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "486" NAME= "C_MMCM3_CLKFBIN_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "487" NAME= "C_MMCM3_CLKFBIN_PORT" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "488" NAME= "C_MMCM3_RST_MODULE" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "489" NAME= "C_CLKIN_FREQ" TYPE= "INTEGER" VALUE= "100000000" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "490" NAME= "C_CLKFBIN_FREQ" TYPE= "INTEGER" VALUE= "125000000" />
<PARAMETER MPD_INDEX= "491" NAME= "C_CLKFBIN_DESKEW" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "492" NAME= "C_PSDONE_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "493" NAME= "C_CLKOUT0_FREQ" TYPE= "INTEGER" VALUE= "125000000" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "494" NAME= "C_CLKOUT0_PHASE" TYPE= "INTEGER" VALUE= "90" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "495" NAME= "C_CLKOUT0_GROUP" TYPE= "STRING" VALUE= "PLL0_ADJUST" />
<PARAMETER MPD_INDEX= "496" NAME= "C_CLKOUT0_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "497" NAME= "C_CLKOUT0_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "498" NAME= "C_CLKOUT1_FREQ" TYPE= "INTEGER" VALUE= "125000000" />
<PARAMETER MPD_INDEX= "499" NAME= "C_CLKOUT1_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "500" NAME= "C_CLKOUT1_GROUP" TYPE= "STRING" VALUE= "PLL0" />
<PARAMETER MPD_INDEX= "501" NAME= "C_CLKOUT1_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "502" NAME= "C_CLKOUT1_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "503" NAME= "C_CLKOUT2_FREQ" TYPE= "INTEGER" VALUE= "125000000" />
<PARAMETER MPD_INDEX= "504" NAME= "C_CLKOUT2_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "505" NAME= "C_CLKOUT2_GROUP" TYPE= "STRING" VALUE= "PLL0_ADJUST" />
<PARAMETER MPD_INDEX= "506" NAME= "C_CLKOUT2_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "507" NAME= "C_CLKOUT2_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "508" NAME= "C_CLKOUT3_FREQ" TYPE= "INTEGER" VALUE= "200000000" />
<PARAMETER MPD_INDEX= "509" NAME= "C_CLKOUT3_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "510" NAME= "C_CLKOUT3_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "511" NAME= "C_CLKOUT3_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "512" NAME= "C_CLKOUT3_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "513" NAME= "C_CLKOUT4_FREQ" TYPE= "INTEGER" VALUE= "62500000" />
<PARAMETER MPD_INDEX= "514" NAME= "C_CLKOUT4_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "515" NAME= "C_CLKOUT4_GROUP" TYPE= "STRING" VALUE= "PLL0_ADJUST" />
<PARAMETER MPD_INDEX= "516" NAME= "C_CLKOUT4_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "517" NAME= "C_CLKOUT4_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "518" NAME= "C_CLKOUT5_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "519" NAME= "C_CLKOUT5_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "520" NAME= "C_CLKOUT5_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "521" NAME= "C_CLKOUT5_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "522" NAME= "C_CLKOUT5_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "523" NAME= "C_CLKOUT6_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "524" NAME= "C_CLKOUT6_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "525" NAME= "C_CLKOUT6_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "526" NAME= "C_CLKOUT6_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "527" NAME= "C_CLKOUT6_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "528" NAME= "C_CLKOUT7_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "529" NAME= "C_CLKOUT7_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "530" NAME= "C_CLKOUT7_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "531" NAME= "C_CLKOUT7_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "532" NAME= "C_CLKOUT7_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "533" NAME= "C_CLKOUT8_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "534" NAME= "C_CLKOUT8_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "535" NAME= "C_CLKOUT8_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "536" NAME= "C_CLKOUT8_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "537" NAME= "C_CLKOUT8_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "538" NAME= "C_CLKOUT9_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "539" NAME= "C_CLKOUT9_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "540" NAME= "C_CLKOUT9_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "541" NAME= "C_CLKOUT9_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "542" NAME= "C_CLKOUT9_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "543" NAME= "C_CLKOUT10_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "544" NAME= "C_CLKOUT10_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "545" NAME= "C_CLKOUT10_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "546" NAME= "C_CLKOUT10_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "547" NAME= "C_CLKOUT10_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "548" NAME= "C_CLKOUT11_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "549" NAME= "C_CLKOUT11_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "550" NAME= "C_CLKOUT11_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "551" NAME= "C_CLKOUT11_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "552" NAME= "C_CLKOUT11_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "553" NAME= "C_CLKOUT12_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "554" NAME= "C_CLKOUT12_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "555" NAME= "C_CLKOUT12_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "556" NAME= "C_CLKOUT12_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "557" NAME= "C_CLKOUT12_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "558" NAME= "C_CLKOUT13_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "559" NAME= "C_CLKOUT13_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "560" NAME= "C_CLKOUT13_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "561" NAME= "C_CLKOUT13_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "562" NAME= "C_CLKOUT13_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "563" NAME= "C_CLKOUT14_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "564" NAME= "C_CLKOUT14_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "565" NAME= "C_CLKOUT14_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "566" NAME= "C_CLKOUT14_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "567" NAME= "C_CLKOUT14_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER MPD_INDEX= "568" NAME= "C_CLKOUT15_FREQ" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "569" NAME= "C_CLKOUT15_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "570" NAME= "C_CLKOUT15_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "571" NAME= "C_CLKOUT15_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PARAMETER MPD_INDEX= "572" NAME= "C_CLKOUT15_VARIABLE_PHASE" TYPE= "BOOLEAN" VALUE= "FALSE" />
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "573" NAME= "C_CLKFBOUT_FREQ" TYPE= "INTEGER" VALUE= "125000000" />
<PARAMETER MPD_INDEX= "574" NAME= "C_CLKFBOUT_PHASE" TYPE= "INTEGER" VALUE= "0" />
<PARAMETER MPD_INDEX= "575" NAME= "C_CLKFBOUT_GROUP" TYPE= "STRING" VALUE= "NONE" />
<PARAMETER MPD_INDEX= "576" NAME= "C_CLKFBOUT_BUF" TYPE= "BOOLEAN" VALUE= "TRUE" />
<PORT CLKFREQUENCY= "100000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "0" NAME= "CLKIN" SIGIS= "CLK" SIGNAME= "dcm_clk_s" />
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "1" NAME= "CLKFBIN" SIGIS= "CLK" SIGNAME= "SRAM_CLK_FB_s" />
<PORT CLKFREQUENCY= "125000000" DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "2" MPD_INDEX= "2" NAME= "CLKOUT0" SIGIS= "CLK" SIGNAME= "clk_125_0000MHz90PLL0_ADJUST" />
<PORT CLKFREQUENCY= "125000000" DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "3" MPD_INDEX= "3" NAME= "CLKOUT1" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0" />
<PORT CLKFREQUENCY= "125000000" DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "4" MPD_INDEX= "4" NAME= "CLKOUT2" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT CLKFREQUENCY= "200000000" DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "5" MPD_INDEX= "5" NAME= "CLKOUT3" SIGIS= "CLK" SIGNAME= "clk_200_0000MHz" />
<PORT CLKFREQUENCY= "62500000" DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "6" MPD_INDEX= "6" NAME= "CLKOUT4" SIGIS= "CLK" SIGNAME= "clk_62_5000MHzPLL0_ADJUST" />
<PORT CLKFREQUENCY= "125000000" DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "7" MPD_INDEX= "18" NAME= "CLKFBOUT" SIGIS= "CLK" SIGNAME= "SRAM_CLK_OUT_s" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "8" MPD_INDEX= "23" NAME= "RST" SIGIS= "RST" SIGNAME= "net_gnd" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "9" MPD_INDEX= "24" NAME= "LOCKED" SIGNAME= "Dcm_all_locked" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "7" NAME= "CLKOUT5" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "8" NAME= "CLKOUT6" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "9" NAME= "CLKOUT7" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "10" NAME= "CLKOUT8" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "11" NAME= "CLKOUT9" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "12" NAME= "CLKOUT10" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "13" NAME= "CLKOUT11" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "14" NAME= "CLKOUT12" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "15" NAME= "CLKOUT13" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "16" NAME= "CLKOUT14" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "O" IS_VALID= "FALSE" MPD_INDEX= "17" NAME= "CLKOUT15" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "19" NAME= "PSCLK" SIGIS= "CLK" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "20" NAME= "PSEN" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "21" NAME= "PSINCDEC" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "22" NAME= "PSDONE" SIGNAME= "__NOC__" />
</MODULE>
<MODULE HWVERSION= "2.01.c" INSTANCE= "jtagppc_cntlr_inst" IPTYPE= "PERIPHERAL" MHS_INDEX= "17" MODCLASS= "PERIPHERAL" MODTYPE= "jtagppc_cntlr" >
<DESCRIPTION TYPE= "SHORT" > PowerPC JTAG Controller</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > JTAGPPC wrapper allows the PowerPC to connect to the JTAG chain of the FPGA.</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/jtagppc_cntlr_v2_01_c/doc/jtagppc_cntlr.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "0" NAME= "C_DEVICE" TYPE= "string" VALUE= "5vfx70t" />
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "1" NAME= "C_NUM_PPC_USED" TYPE= "integer" VALUE= "1" />
<PORT DIR= "I" MPD_INDEX= "0" NAME= "TRSTNEG" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "1" NAME= "HALTNEG0" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "2" NAME= "DBGC405DEBUGHALT0" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "3" NAME= "HALTNEG1" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "4" NAME= "DBGC405DEBUGHALT1" SIGNAME= "__NOC__" />
<PORT BUS= "JTAGPPC0" DEF_SIGNAME= "ppc440_0_jtagppc_bus_C405JTGTDO" DIR= "I" MPD_INDEX= "5" NAME= "C405JTGTDO0" SIGNAME= "ppc440_0_jtagppc_bus_C405JTGTDO" />
<PORT BUS= "JTAGPPC0" DEF_SIGNAME= "ppc440_0_jtagppc_bus_C405JTGTDOEN" DIR= "I" MPD_INDEX= "6" NAME= "C405JTGTDOEN0" SIGNAME= "ppc440_0_jtagppc_bus_C405JTGTDOEN" />
<PORT BUS= "JTAGPPC0" DEF_SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TCK" DIR= "O" MPD_INDEX= "7" NAME= "JTGC405TCK0" SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TCK" />
<PORT BUS= "JTAGPPC0" DEF_SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TDI" DIR= "O" MPD_INDEX= "8" NAME= "JTGC405TDI0" SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TDI" />
<PORT BUS= "JTAGPPC0" DEF_SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TMS" DIR= "O" MPD_INDEX= "9" NAME= "JTGC405TMS0" SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TMS" />
<PORT BUS= "JTAGPPC0" DEF_SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TRSTNEG" DIR= "O" MPD_INDEX= "10" NAME= "JTGC405TRSTNEG0" SIGNAME= "ppc440_0_jtagppc_bus_JTGC405TRSTNEG" />
<PORT BUS= "JTAGPPC1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "11" NAME= "C405JTGTDO1" SIGNAME= "__NOC__" />
<PORT BUS= "JTAGPPC1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "12" NAME= "C405JTGTDOEN1" SIGNAME= "__NOC__" />
<PORT BUS= "JTAGPPC1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "13" NAME= "JTGC405TCK1" SIGNAME= "__NOC__" />
<PORT BUS= "JTAGPPC1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "14" NAME= "JTGC405TDI1" SIGNAME= "__NOC__" />
<PORT BUS= "JTAGPPC1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "15" NAME= "JTGC405TMS1" SIGNAME= "__NOC__" />
<PORT BUS= "JTAGPPC1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "16" NAME= "JTGC405TRSTNEG1" SIGNAME= "__NOC__" />
<BUSINTERFACE BUSNAME= "ppc440_0_jtagppc_bus" BUSSTD= "XIL" BUSSTD_PSF= "XIL_JTAGPPC" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "JTAGPPC0" TYPE= "INITIATOR" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_JTAGPPC" IS_VALID= "FALSE" MPD_INDEX= "1" NAME= "JTAGPPC1" TYPE= "INITIATOR" />
</MODULE>
<MODULE HWVERSION= "2.00.a" INSTANCE= "proc_sys_reset_0" IPTYPE= "PERIPHERAL" MHS_INDEX= "18" MODCLASS= "PERIPHERAL" MODTYPE= "proc_sys_reset" >
<DESCRIPTION TYPE= "SHORT" > Processor System Reset Module</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > Reset management module</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/proc_sys_reset_v2_00_a/doc/proc_sys_reset.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "0" NAME= "C_SUBFAMILY" TYPE= "string" VALUE= "fx" >
<DESCRIPTION > Device Subfamily</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "1" NAME= "C_EXT_RST_WIDTH" TYPE= "integer" VALUE= "4" >
<DESCRIPTION > Number of Clocks Before Input Change is Recognized On The External Reset Input </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "2" NAME= "C_AUX_RST_WIDTH" TYPE= "integer" VALUE= "4" >
<DESCRIPTION > Number of Clocks Before Input Change is Recognized On The Auxiliary Reset Input </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "USER" MPD_INDEX= "3" NAME= "C_EXT_RESET_HIGH" TYPE= "std_logic" VALUE= "0" >
<DESCRIPTION > External Reset Active High </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "4" NAME= "C_AUX_RESET_HIGH" TYPE= "std_logic" VALUE= "1" >
<DESCRIPTION > Auxiliary Reset Active High </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_NUM_BUS_RST" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Number of Bus Structure Reset Registered Outputs </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_NUM_PERP_RST" TYPE= "integer" VALUE= "1" >
<DESCRIPTION > Number of Peripheral Reset Registered Outputs </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_FAMILY" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PORT CLKFREQUENCY= "125000000" DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "0" MPD_INDEX= "0" NAME= "Slowest_sync_clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "1" NAME= "Ext_Reset_In" SIGIS= "RST" SIGNAME= "sys_rst_s" />
<PORT DIR= "I" IS_INMHS= "TRUE" MHS_INDEX= "2" MPD_INDEX= "10" NAME= "Dcm_locked" SIGNAME= "Dcm_all_locked" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "3" MPD_INDEX= "18" NAME= "Bus_Struct_Reset" SIGIS= "RST" SIGNAME= "sys_bus_reset" VECFORMULA= "[0:C_NUM_BUS_RST-1]" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "4" MPD_INDEX= "19" NAME= "Peripheral_Reset" SIGIS= "RST" SIGNAME= "sys_periph_reset" VECFORMULA= "[0:C_NUM_PERP_RST-1]" />
<PORT DIR= "I" MPD_INDEX= "2" NAME= "Aux_Reset_In" SIGIS= "RST" SIGNAME= "__NOC__" />
<PORT DIR= "I" MPD_INDEX= "3" NAME= "MB_Debug_Sys_Rst" SIGIS= "RST" SIGNAME= "__NOC__" />
<PORT BUS= "RESETPPC0" DEF_SIGNAME= "ppc_reset_bus_Core_Reset_Req" DIR= "I" MPD_INDEX= "4" NAME= "Core_Reset_Req_0" SIGIS= "RST" SIGNAME= "ppc_reset_bus_Core_Reset_Req" />
<PORT BUS= "RESETPPC0" DEF_SIGNAME= "ppc_reset_bus_Chip_Reset_Req" DIR= "I" MPD_INDEX= "5" NAME= "Chip_Reset_Req_0" SIGIS= "RST" SIGNAME= "ppc_reset_bus_Chip_Reset_Req" />
<PORT BUS= "RESETPPC0" DEF_SIGNAME= "ppc_reset_bus_System_Reset_Req" DIR= "I" MPD_INDEX= "6" NAME= "System_Reset_Req_0" SIGIS= "RST" SIGNAME= "ppc_reset_bus_System_Reset_Req" />
<PORT BUS= "RESETPPC1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "7" NAME= "Core_Reset_Req_1" SIGIS= "RST" SIGNAME= "__NOC__" />
<PORT BUS= "RESETPPC1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "8" NAME= "Chip_Reset_Req_1" SIGIS= "RST" SIGNAME= "__NOC__" />
<PORT BUS= "RESETPPC1" DEF_SIGNAME= "__BUS__" DIR= "I" MPD_INDEX= "9" NAME= "System_Reset_Req_1" SIGIS= "RST" SIGNAME= "__NOC__" />
<PORT BUS= "RESETPPC0" DEF_SIGNAME= "ppc_reset_bus_RstcPPCresetcore" DIR= "O" MPD_INDEX= "11" NAME= "RstcPPCresetcore_0" SIGIS= "RST" SIGNAME= "ppc_reset_bus_RstcPPCresetcore" />
<PORT BUS= "RESETPPC0" DEF_SIGNAME= "ppc_reset_bus_RstsPPCresetchip" DIR= "O" MPD_INDEX= "12" NAME= "RstcPPCresetchip_0" SIGIS= "RST" SIGNAME= "ppc_reset_bus_RstsPPCresetchip" />
<PORT BUS= "RESETPPC0" DEF_SIGNAME= "ppc_reset_bus_RstcPPCresetsys" DIR= "O" MPD_INDEX= "13" NAME= "RstcPPCresetsys_0" SIGIS= "RST" SIGNAME= "ppc_reset_bus_RstcPPCresetsys" />
<PORT BUS= "RESETPPC1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "14" NAME= "RstcPPCresetcore_1" SIGIS= "RST" SIGNAME= "__NOC__" />
<PORT BUS= "RESETPPC1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "15" NAME= "RstcPPCresetchip_1" SIGIS= "RST" SIGNAME= "__NOC__" />
<PORT BUS= "RESETPPC1" DEF_SIGNAME= "__BUS__" DIR= "O" MPD_INDEX= "16" NAME= "RstcPPCresetsys_1" SIGIS= "RST" SIGNAME= "__NOC__" />
<PORT DIR= "O" MPD_INDEX= "17" NAME= "MB_Reset" SIGIS= "RST" SIGNAME= "__NOC__" />
<BUSINTERFACE BUSNAME= "ppc_reset_bus" BUSSTD= "XIL" BUSSTD_PSF= "XIL_RESETPPC" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "RESETPPC0" TYPE= "INITIATOR" />
<BUSINTERFACE BUSNAME= "__NOC__" BUSSTD= "XIL" BUSSTD_PSF= "XIL_RESETPPC" IS_VALID= "FALSE" MPD_INDEX= "1" NAME= "RESETPPC1" TYPE= "INITIATOR" />
</MODULE>
<MODULE HWVERSION= "2.00.a" INSTANCE= "xps_intc_0" IPTYPE= "PERIPHERAL" MHS_INDEX= "19" MODCLASS= "INTERRUPT_CNTLR" MODTYPE= "xps_intc" >
<DESCRIPTION TYPE= "SHORT" > XPS Interrupt Controller</DESCRIPTION>
<DESCRIPTION TYPE= "LONG" > intc core attached to the PLBV46</DESCRIPTION>
<DOCUMENTATION >
<DOCUMENT SOURCE= "c:/devtools/Xilinx/11.1/EDK/hw/XilinxProcessorIPLib/pcores/xps_intc_v2_00_a/doc/xps_intc.pdf" TYPE= "IP" />
</DOCUMENTATION>
<LICENSEINFO ICON_NAME= "ps_core_preferred" />
<PARAMETER MPD_INDEX= "0" NAME= "C_FAMILY" TYPE= "STRING" VALUE= "virtex5" >
<DESCRIPTION > Device Family</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "BASE" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "1" NAME= "C_BASEADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x81800000" >
<DESCRIPTION > Base Address</DESCRIPTION>
</PARAMETER>
<PARAMETER ADDRESS= "HIGH" ADDR_TYPE= "REGISTER" CHANGEDBY= "USER" MPD_INDEX= "2" NAME= "C_HIGHADDR" TYPE= "std_logic_vector(0 to 31)" VALUE= "0x8180ffff" >
<DESCRIPTION > High Address</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "3" NAME= "C_SPLB_AWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > PLB Address Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "4" NAME= "C_SPLB_DWIDTH" TYPE= "INTEGER" VALUE= "128" >
<DESCRIPTION > PLB Data Bus Width</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "5" NAME= "C_SPLB_P2P" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave Uses P2P Topology</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "6" NAME= "C_SPLB_NUM_MASTERS" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Number of PLB Masters</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "7" NAME= "C_SPLB_MID_WIDTH" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Master ID Bus Width of PLB</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "8" NAME= "C_SPLB_NATIVE_DWIDTH" TYPE= "INTEGER" VALUE= "32" >
<DESCRIPTION > Native Data Bus Width of PLB Slave</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "9" NAME= "C_SPLB_SUPPORT_BURSTS" TYPE= "INTEGER" VALUE= "0" >
<DESCRIPTION > PLB Slave is Capable of Bursts</DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "10" NAME= "C_NUM_INTR_INPUTS" TYPE= "INTEGER" VALUE= "2" >
<DESCRIPTION > Number of Interrupt Inputs </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "11" NAME= "C_KIND_OF_INTR" TYPE= "std_logic_vector(31 downto 0)" VALUE= "0b00000000000000000000000000000001" >
<DESCRIPTION > Type of Interrupt for Each Input </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "12" NAME= "C_KIND_OF_EDGE" TYPE= "std_logic_vector(31 downto 0)" VALUE= "0b00000000000000000000000000000001" >
<DESCRIPTION > Type of Each Edge Senstive Interrupt </DESCRIPTION>
</PARAMETER>
<PARAMETER CHANGEDBY= "SYSTEM" MPD_INDEX= "13" NAME= "C_KIND_OF_LVL" TYPE= "std_logic_vector(31 downto 0)" VALUE= "0b00000000000000000000000000000000" >
<DESCRIPTION > Type of Each Level Sensitive Interrupt </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "14" NAME= "C_HAS_IPR" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Support IPR </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "15" NAME= "C_HAS_SIE" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Support SIE </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "16" NAME= "C_HAS_CIE" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Support CIE </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "17" NAME= "C_HAS_IVR" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > Support IVR </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "18" NAME= "C_IRQ_IS_LEVEL" TYPE= "INTEGER" VALUE= "1" >
<DESCRIPTION > IRQ Output Use Level </DESCRIPTION>
</PARAMETER>
<PARAMETER MPD_INDEX= "19" NAME= "C_IRQ_ACTIVE" TYPE= "std_logic" VALUE= "1" >
<DESCRIPTION > The Sense of IRQ Output </DESCRIPTION>
</PARAMETER>
<MEMORYMAP >
<MEMRANGE BASEDECIMAL= "2172649472" BASENAME= "C_BASEADDR" BASEVALUE= "0x81800000" HIGHDECIMAL= "2172715007" HIGHNAME= "C_HIGHADDR" HIGHVALUE= "0x8180ffff" MEMTYPE= "REGISTER" MINSIZE= "0x20" SIZE= "65536" SIZEABRV= "64K" >
<SLVINTERFACES >
<BUSINTERFACE NAME= "SPLB" />
</SLVINTERFACES>
</MEMRANGE>
</MEMORYMAP>
<PORT DIR= "I" ENDIAN= "LITTLE" IS_INMHS= "TRUE" LSB= "0" MHS_INDEX= "0" MPD_INDEX= "42" MSB= "1" NAME= "Intr" SENSITIVITY= "EDGE_RISING" SIGIS= "INTERRUPT" SIGNAME= "fpga_0_Ethernet_MAC_MDINT_pin&RS232_Uart_1_Interrupt" VECFORMULA= "[(C_NUM_INTR_INPUTS-1):0]" />
<PORT DIR= "O" IS_INMHS= "TRUE" MHS_INDEX= "1" MPD_INDEX= "43" NAME= "Irq" SENSITIVITY= "EDGE_RISING" SIGIS= "INTERRUPT" SIGNAME= "ppc440_0_EICC440EXTIRQ" />
<PORT BUS= "SPLB" CLKFREQUENCY= "125000000" DEF_SIGNAME= "clk_125_0000MHzPLL0_ADJUST" DIR= "I" MPD_INDEX= "0" NAME= "SPLB_Clk" SIGIS= "CLK" SIGNAME= "clk_125_0000MHzPLL0_ADJUST" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_SPLB_Rst" DIR= "I" MPD_INDEX= "1" NAME= "SPLB_Rst" SIGIS= "RST" SIGNAME= "plb_v46_0_SPLB_Rst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_ABus" DIR= "I" MPD_INDEX= "2" NAME= "PLB_ABus" SIGNAME= "plb_v46_0_PLB_ABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_PAValid" DIR= "I" MPD_INDEX= "3" NAME= "PLB_PAValid" SIGNAME= "plb_v46_0_PLB_PAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_masterID" DIR= "I" MPD_INDEX= "4" NAME= "PLB_masterID" SIGNAME= "plb_v46_0_PLB_masterID" VECFORMULA= "[0:(C_SPLB_MID_WIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_RNW" DIR= "I" MPD_INDEX= "5" NAME= "PLB_RNW" SIGNAME= "plb_v46_0_PLB_RNW" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_BE" DIR= "I" MPD_INDEX= "6" NAME= "PLB_BE" SIGNAME= "plb_v46_0_PLB_BE" VECFORMULA= "[0:((C_SPLB_DWIDTH/8)-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_size" DIR= "I" MPD_INDEX= "7" NAME= "PLB_size" SIGNAME= "plb_v46_0_PLB_size" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_type" DIR= "I" MPD_INDEX= "8" NAME= "PLB_type" SIGNAME= "plb_v46_0_PLB_type" VECFORMULA= "[0:2]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrDBus" DIR= "I" MPD_INDEX= "9" NAME= "PLB_wrDBus" SIGNAME= "plb_v46_0_PLB_wrDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_UABus" DIR= "I" MPD_INDEX= "10" NAME= "PLB_UABus" SIGNAME= "plb_v46_0_PLB_UABus" VECFORMULA= "[0:31]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_SAValid" DIR= "I" MPD_INDEX= "11" NAME= "PLB_SAValid" SIGNAME= "plb_v46_0_PLB_SAValid" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPrim" DIR= "I" MPD_INDEX= "12" NAME= "PLB_rdPrim" SIGNAME= "plb_v46_0_PLB_rdPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPrim" DIR= "I" MPD_INDEX= "13" NAME= "PLB_wrPrim" SIGNAME= "plb_v46_0_PLB_wrPrim" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_abort" DIR= "I" MPD_INDEX= "14" NAME= "PLB_abort" SIGNAME= "plb_v46_0_PLB_abort" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_busLock" DIR= "I" MPD_INDEX= "15" NAME= "PLB_busLock" SIGNAME= "plb_v46_0_PLB_busLock" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_MSize" DIR= "I" MPD_INDEX= "16" NAME= "PLB_MSize" SIGNAME= "plb_v46_0_PLB_MSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_lockErr" DIR= "I" MPD_INDEX= "17" NAME= "PLB_lockErr" SIGNAME= "plb_v46_0_PLB_lockErr" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrBurst" DIR= "I" MPD_INDEX= "18" NAME= "PLB_wrBurst" SIGNAME= "plb_v46_0_PLB_wrBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdBurst" DIR= "I" MPD_INDEX= "19" NAME= "PLB_rdBurst" SIGNAME= "plb_v46_0_PLB_rdBurst" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendReq" DIR= "I" MPD_INDEX= "20" NAME= "PLB_wrPendReq" SIGNAME= "plb_v46_0_PLB_wrPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendReq" DIR= "I" MPD_INDEX= "21" NAME= "PLB_rdPendReq" SIGNAME= "plb_v46_0_PLB_rdPendReq" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_wrPendPri" DIR= "I" MPD_INDEX= "22" NAME= "PLB_wrPendPri" SIGNAME= "plb_v46_0_PLB_wrPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_rdPendPri" DIR= "I" MPD_INDEX= "23" NAME= "PLB_rdPendPri" SIGNAME= "plb_v46_0_PLB_rdPendPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_reqPri" DIR= "I" MPD_INDEX= "24" NAME= "PLB_reqPri" SIGNAME= "plb_v46_0_PLB_reqPri" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_PLB_TAttribute" DIR= "I" MPD_INDEX= "25" NAME= "PLB_TAttribute" SIGNAME= "plb_v46_0_PLB_TAttribute" VECFORMULA= "[0:15]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_addrAck" DIR= "O" MPD_INDEX= "26" NAME= "Sl_addrAck" SIGNAME= "plb_v46_0_Sl_addrAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_SSize" DIR= "O" MPD_INDEX= "27" NAME= "Sl_SSize" SIGNAME= "plb_v46_0_Sl_SSize" VECFORMULA= "[0:1]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wait" DIR= "O" MPD_INDEX= "28" NAME= "Sl_wait" SIGNAME= "plb_v46_0_Sl_wait" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rearbitrate" DIR= "O" MPD_INDEX= "29" NAME= "Sl_rearbitrate" SIGNAME= "plb_v46_0_Sl_rearbitrate" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrDAck" DIR= "O" MPD_INDEX= "30" NAME= "Sl_wrDAck" SIGNAME= "plb_v46_0_Sl_wrDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrComp" DIR= "O" MPD_INDEX= "31" NAME= "Sl_wrComp" SIGNAME= "plb_v46_0_Sl_wrComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDBus" DIR= "O" MPD_INDEX= "32" NAME= "Sl_rdDBus" SIGNAME= "plb_v46_0_Sl_rdDBus" VECFORMULA= "[0:(C_SPLB_DWIDTH-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdDAck" DIR= "O" MPD_INDEX= "33" NAME= "Sl_rdDAck" SIGNAME= "plb_v46_0_Sl_rdDAck" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdComp" DIR= "O" MPD_INDEX= "34" NAME= "Sl_rdComp" SIGNAME= "plb_v46_0_Sl_rdComp" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MBusy" DIR= "O" MPD_INDEX= "35" NAME= "Sl_MBusy" SIGNAME= "plb_v46_0_Sl_MBusy" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MWrErr" DIR= "O" MPD_INDEX= "36" NAME= "Sl_MWrErr" SIGNAME= "plb_v46_0_Sl_MWrErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MRdErr" DIR= "O" MPD_INDEX= "37" NAME= "Sl_MRdErr" SIGNAME= "plb_v46_0_Sl_MRdErr" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_wrBTerm" DIR= "O" MPD_INDEX= "38" NAME= "Sl_wrBTerm" SIGNAME= "plb_v46_0_Sl_wrBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdWdAddr" DIR= "O" MPD_INDEX= "39" NAME= "Sl_rdWdAddr" SIGNAME= "plb_v46_0_Sl_rdWdAddr" VECFORMULA= "[0:3]" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_rdBTerm" DIR= "O" MPD_INDEX= "40" NAME= "Sl_rdBTerm" SIGNAME= "plb_v46_0_Sl_rdBTerm" />
<PORT BUS= "SPLB" DEF_SIGNAME= "plb_v46_0_Sl_MIRQ" DIR= "O" MPD_INDEX= "41" NAME= "Sl_MIRQ" SIGNAME= "plb_v46_0_Sl_MIRQ" VECFORMULA= "[0:(C_SPLB_NUM_MASTERS-1)]" />
<BUSINTERFACE BUSNAME= "plb_v46_0" BUSSTD= "PLBV46" BUSSTD_PSF= "PLBV46" IS_INMHS= "TRUE" MPD_INDEX= "0" NAME= "SPLB" TYPE= "SLAVE" />
<INTERRUPTINFO INTC_INDEX= "0" PROCESSOR= "ppc440_0" TYPE= "CONTROLLER" >
<SOURCE PRIORITY= "0" SIGNAME= "fpga_0_Ethernet_MAC_MDINT_pin" />
<SOURCE INSTANCE= "RS232_Uart_1" PRIORITY= "1" SIGNAME= "RS232_Uart_1_Interrupt" />
</INTERRUPTINFO>
</MODULE>
</MODULES>
</EDKSYSTEM>
